Synthesis of hollow ferrite nanospheres for biomedical applications

Hollow ferrite spheres of 220-340 nm diameter were synthesized at 60 °C as multi-functionalized magnetic carriers which are potentially applicable both as drug delivery systems (DDS) and hyperthermia treatment. We found that SH and OH groups on the silica template spheres enabled the fabrication of continuous ferrite shells of 20-30 nm in thickness. Transmission electron microscopy and energy-dispersive spectroscopy revealed that the templates were dissolved by a NaOH solution, yielding hollow particles exhibiting saturation magnetization of 78 emu/g. The results suggested that the ferrite shells are porous and the pores work as pathway for releasing drugs from the hollow particle inside.     

Magnetic characterization of surface-coated magnetic nanoparticles for biomedical application

The influence of the oleic acid surface coating on Fe₃O₄ and NiFe₂O₄ nanoparticles on their magnetic and calorimetric characterization was investigated. Fe₃O₄ nanoparticles (particle sizes of 15-20 and 20-30 nm) and NiFe₂O₄ nanoparticles (particle sizes of 20-30 nm) were dispersed in oleic acid. The surface coating resulted in a decrease in the dipole-dipole interaction between the particles, which in turn affected the coercivity and heat dissipation of the nanoparticles. The coercivity of the oleic-acid-coated nanoparticles was found to be lower than that of the uncoated nanoparticles. The temperature rise in the oleic-acid-coated nanoparticles was greater than that of the uncoated nanoparticles; this temperature rise was associated with the relaxation losses. The viscosity dependence on the self-heating temperature of Fe₃O₄ nanoparticles (15-20 and 20-30 nm) under an ac magnetic field was measured. The temperature rise for both the Fe₃O₄ nanoparticles (15-20 and 20-30 nm) exhibited a strong dependence on viscosity at each magnetic field frequency, and the contribution of Brownian relaxation loss to the temperature rise was revealed. Moreover, an in vitro cytotoxicity test of Fe₃O₄ and NiFe₂O₄ was performed using human cervical carcinoma cells (HeLa), and the cytotoxicity of NiFe₂O₄ nanoparticles was compared to that of Fe₃O₄ nanoparticles.     

Synthesis and characterization of carboxymethyl dextran-coated Mn/Zn ferrite for biomedical applications

Previous studies have shown that magnetic nanoparticles possess great potential for various in vivo applications such as magnetic resonance imaging contrast enhancement, tissue repair, cancer treatment agents, and controlled drug delivery. Many of these applications require that magnetic nanoparticles be colloidally stable in biological media. The goal of this study was to obtain a magnetic fluid produced by the colloidal suspension of manganese/zinc ferrite (MZF) nanoparticles that could be stably dispersed in aqueous solution throughout the range of physiological pH and ionic strength. These superparamagnetic nanoparticles were stabilized through steric repulsion by coating with biologically compatible carboxymethyl dextran (CMDx). Samples of the resultant magnetic fluid were analyzed using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), X-ray diffraction (XRD), zeta potential measurements, dynamic light scattering, transmission electron microscopy (TEM), and SQUID magnetometry. Results show that we obtained superparamagnetic metal-oxide crystals with composition of Mn_0.24Zn_0.76Fe₂O₄. Cell viability measurements show the material is non-toxic to MCF-7 and CaCo-2 cell lines at concentrations of up to 7.5 mg/mL of particle fraction for contact time of up to 48 h.     

Biocompatible polymeric implants for controlled drug delivery produced by MAPLE

Implants consisting of drug cores coated with polymeric films were developed for delivering drugs in a controlled manner. The polymeric films were produced using matrix assisted pulsed laser evaporation (MAPLE) and consist of poly(lactide-co-glycolide) (PLGA), used individually as well as blended with polyethylene glycol (PEG). Indomethacin (INC) was used as model drug. The implants were tested in vitro (i.e. in conditions similar with those encountered inside the body), for predicting their behavior after implantation at the site of action. To this end, they were immersed in physiological media (i.e. phosphate buffered saline PBS pH 7.4 and blood). At various intervals of PBS immersion (and respectively in blood), the polymeric films coating the drug cores were studied in terms of morphology, chemistry, wettability and blood compatibility. PEG:PLGA film exhibited superior properties as compared to PLGA film, the corresponding implant being thus more suitable for internal use in the human body. In addition, the implant containing PEG:PLGA film provided an efficient and sustained release of the drug. The kinetics of the drug release was consistent with a diffusion mediated mechanism (as revealed by fitting the data with Higuchi's model); the drug was gradually released through the pores formed during PBS immersion. In contrast, the implant containing PLGA film showed poor drug delivery rates and mechanical failure. In this case, fitting the data with Hixson-Crowell model indicated a release mechanism dominated by polymer erosion.     

Multiwall-carbon nanotube/cobalt ferrite hybrid: Synthesis,magnetic and conductivity characterization

Functionalized multiwall carbon nanotubes (MWCNT-COOH) were decorated with crystalline cobalt ferrite nanoparticles (CoFe₂O₄ NPs) by co-precipitation reaction to form MWCNT-COOH/CoFe₂O₄ hybrid. The hybrid was characterized by X-ray diffraction analysis, transmission electron microscopy (TEM), Fourier transfom infrared spectroscopy and vibrating sample magnetometry. The results confirmed that MWCNTs and CoFe₂O₄ NPs coexisted in the hybrid. The TEM results showed a thick layer of CoFe₂O₄ was intimately connected to the surface of MWCNTs. The saturation magnetization value of the hybrid was 11.5 emu/g. There has been a high frequency fluctuation in conductivity, however, above all dc conductivity changes and resulting activation energy is calculated from the Arrhenius plots. It is found to vary with the temperature regions. This can be attributed to the existence of a conventional temperature independent tunneling conduction mechanism, which can be also explained that the metallic conduction is a dominant mechanism around room temperature. The ac conductivity of MWCNT-COOH/CoFe₂O₄ hybrid might also be a consequence of the predictions of the universal dynamic response and the ‘n’ power exponents could be determined with lower concentration of the addition in the hybrids.     

Naproxen drug delivery using periodic mesoporous silica SBA-15

In this paper, we present the release of naproxen from hexagonal periodic mesoporous silica SBA-15, which serves as a drug delivery system. Naproxen, the well-known nonsteroidal anti-inflammatory drug (NSAID), was loaded into the pores of SBA-15 silica modified with aminopropyl groups. The physicochemical properties of the modified sample (A-SBA-15/napro) were compared with the unmodified SBA-15 mesoporous silica loaded with the drug (SBA-15/napro). The kinetic of the naproxen release into the physiological solution was studied. The released amount of naproxen represented 90.7% from the unmodified SBA-15 in 72 h, while from the sample A-SBA-15/napro the released amount represented about 80.9%. The prepared materials were characterized by nitrogen adsorption/desorption, Small angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FT-IR) and the thermoanalytical methods (TG/DTA). Thin layer chromatography (TLC) was used for quantitative determination of the released naproxen.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Superparamagnetic nanoparticles for biomedical applications: Possibilities and limitations of a new drug delivery system

Nanoparticles can be used in biomedical applications, where they facilitate laboratory diagnostics, or in medical drug targeting. They are used for in vivo applications such as contrast agent for magnetic resonance imaging (MRI), for tumor therapy or cardiovascular disease. Very promising nanoparticles for these applications are superparamagnetic nanoparticles based on a core consisting of iron oxides (SPION) that can be targeted through external magnets. SPION are coated with biocompatible materials and can be functionalized with drugs, proteins or plasmids. In this review, the characteristics and applications of SPION in the biomedical sector are introduced and discussed.     

Magnetic iron oxide nanoparticles: Synthesis and surface coating techniques for biomedical applications

Iron oxide nanoparticles are the most popular magnetic nanoparticles used in biomedical applications due to their low cost, low toxicity, and unique magnetic property. Magnetic iron oxide nanoparticles, including magnetite （Fe304） and maghemite （γ-Fe203）, usually exhibit a superparamagnetic property as their size goes smaller than 20 nm, which are often denoted as superparamagnetic iron oxide nanoparticles （SPIONs） and utilized for drug delivery, diagnosis, therapy, and etc. This review article gives a brief introduction on magnetic iron oxide nanoparticles in terms of their fundamentals of magnetism, magnetic resonance imaging （MRI）, and drug delivery, as well as the synthesis approaches, surface coating, and application examples from recent key literatures. Because the quality and surface chemistry play important roles in biomedical applications, our review focuses on the synthesis approaches and surface modifications of iron oxide nanopar- ticles. We aim to provide a detailed introduction to readers who are new to this field, helping them to choose suitable synthesis methods and to optimize the surface chemistry of iron oxide nanoparticles for their interests.     

Synthesis and characterization of graphene-based nanocomposites with potential use for biomedical applications

In this paper, GaN nanoparticles were synthesized from the complex Ga(H₂NCONH₂)₆Cl₃ in the flow of NH₃ at a mild temperature (350 °C). Further purification was performed by the ethanol-thermal method. The ethanol-thermal method also prompted the GaN nanoparticles to grow into an anisotropic morphology. XRD patterns reveal that GaN nanoparticles have crystallized in a hexagonal wurtzite structure. TEM observation shows that the average size of the as-prepared nanoparticles is about 5–10 nm. The photoluminescence spectrum exhibits a broad green emission band with a peak at 510 nm. It can be known from the first-principle theoretic simulation by the TDDFT method that this fluorescence emission band is attributed to the hydride defects of V _N-H on the surface of GaN nanoparticles.     

Photo-synthesis of protein-based nanoparticles and the application in drug delivery

Recently, protein-based nanoparticles as drug delivery systems have attracted great interests due to the excellent behavior of high biocompatibility and biodegradability, and low toxicity. However, the synthesis techniques are generally costly, chemical reagents introduced, and especially present difficulties in producing homogeneous monodispersed nanoparticles. Here, we introduce a novel physical method to synthesize protein nanoparticles which can be accomplished under physiological condition only through ultraviolet (UV) illumination. By accurately adjusting the intensity and illumination time of UV light, disulfide bonds in proteins can be selectively reduced and the subsequent self-assembly process can be well controlled. Importantly, the co-assembly can also be dominated when the proteins mixed with either anti-cancer drugs, siRNA, or active targeting molecules. Both in vitro and in vivo experiments indicate that our synthesized protein–drug nanoparticles (drug-loading content and encapsulation efficiency being ca. 8.2% and 70%, respectively) not only possess the capability of traditional drug delivery systems (DDS), but also have a greater drug delivery efficiency to the tumor sites and a better inhibition of tumor growth (only 35% of volume comparing to the natural growing state), indicating it being a novel drug delivery system in tumor therapy.     

Synthesis and characterization of Ni-Zn ferrite nanoparticles

Nickel zinc ferrite nanoparticles Ni_xZn_1−xFe₂O₄ (x=0.1, 0.3, 0.5) have been synthesized by a chemical co-precipitation method. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, electron paramagnetic resonance, dc magnetization and ac susceptibility measurements. The X-ray diffraction patterns confirm the synthesis of single crystalline Ni_xZn_1−xFe₂O₄ nanoparticles. The lattice parameter decreases with increase in Ni content resulting in a reduction in lattice strain. Similarly crystallite size increases with the concentration of Ni. The magnetic measurements show the superparamagnetic nature of the samples for x=0.1 and 0.3 whereas for x=0.5 the material is ferromagnetic. The saturation magnetization is 23.95 emu/g and increases with increase in Ni content. The superparamagnetic nature of the samples is supported by the EPR and ac susceptibility measurement studies. The blocking temperature increases with Ni concentration. The increase in blocking temperature is explained by the redistribution of the cations on tetrahedral (A) and octahedral (B) sites.     

Synthesis and characterization of bovine femur bone hydroxyapatite containing silver nanoparticles for the biomedical applications

Bovine femur bone hydroxyapatite (HA) containing silver (Ag) nanoparticles was synthesized by thermal decomposition method and subsequent reduction of silver nitrate with N,N-dimethylformamide (DMF) in the presence of poly(vinylacetate) (PVAc). The structural, morphological, and chemical properties of the HA–Ag nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). TEM images showed that the Ag nanoparticles with size ranging from 8 to 20 nm and were arranged at the periphery of HA crystals. Bactericidal activity of HA–Ag with different concentration of Ag nanoparticles immobilized on the surface of HA was investigated against gram-positive Staphylococcus aureus (S. aureus, non-MRSA), Methicillin resistant S. aureus (MRSA) and gram-negative Escherichia coli (E. coli) by the disc diffusion susceptibility test. The HA–Ag nanoparticles showed that broad spectrum activity against non-MRSA, MRSA, and E. coli bacterial strains.     

Synthesis of cobalt ferrite nano-particles and their magnetic characterization

Cobalt ferrite nano-particles (CoFe₂O₄) were synthesized by the co-precipitation method with ammonium hydroxide as an alkaline solution. The reactions were carried out at different temperatures between 20 and 80 °C. The nano-particles have been investigated by magnetic measurements, X-ray powder diffraction and transmission electron microscopy. The average crystallite size of the synthesized samples was between 11 and 45 nm, which was found to be dependent on both pH value of the reaction and annealing temperatures. However, lattice parameters, interplane spacing and grain size were controlled by varying the annealing temperature. Magnetic characterization of the nano-samples were carried out using a vibrating sample magnetometer at room temperature. The saturation magnetization was computed and found to lie between 5 and 67 emu/g depending on the particle size of the studied sample. The coercivity was found to exhibit non-monotonic behavior with the particle size. Such behavior can be accounted for by the combination between surface anisotropy and thermal energies. The ratio of remanence magnetization to saturation magnetization was found to exhibit almost linear dependence on the particle size.     

Acoustically active perfluorocarbon nanoemulsions as drug delivery carriers for camptothecin: drug release and cytotoxicity against cancer cells

Camptothecin is a topoisomerase I inhibitor that acts against a broad spectrum of cancers. However, its clinical application is limited by its insolubility, instability, and toxicity. The aim of the present study was to develop acoustically active nanoemulsions for camptothecin encapsulation to circumvent these delivery problems. The nanoemulsions were prepared using liquid perfluorocarbons and coconut oil as the cores of the inner phase. These nanoemulsions were stabilized by phospholipids and/or Pluronic F68 (PF68). The nanoemulsions were prepared at high drug loading of ∼100% with a mean droplet diameter of 220-420 nm. Camptothecin in these systems showed retarded drug release. Camptothecin in nanoemulsions with a lower oil concentration exhibited cytotoxicity against melanomas and ovarian cancer cells. Confocal laser scanning microscopy confirmed nanoemulsion uptake into cells. Hemolysis caused by the interaction between erythrocytes and the nanoemulsions was investigated. Formulations with phosphatidylethanolamine as the emulsifier showed less hemolysis than those with phosphatidylcholine. Using a 1 MHz ultrasound, an increased release of camptothecin from the system with lower oil concentration could be established, illustrating a drug-targeting effect.     

Synthesis and characterization of gadolinium nanostructured materials with potential applications in magnetic resonance imaging,neutron-capture therapy and targeted drug delivery

Two Gadolinium nanostructured materials, Gd₂(OH)₅NO₃ nanoparticles and Gd(OH)₃ nanorods, were synthesized and extensively characterized by various techniques. In addition to the potential use of Gd₂(OH)₅NO₃ in magnetic resonance imaging (MRI) and Neutron-capture therapy (NCT) application, it could also be used in targeted drug delivery. An antibiotic (nalidixic acid), two amino acids (aspartic and glutamic acid), a fatty acid and a surfactant (SDS) were intercalated in the nanoparticles. The surface of the nanoparticles was modified with folic acid in order to be capable of targeted delivery to folate receptor expressing sites, such as tumor human cells.     

Porphyrin-like porous nanomaterials as drug delivery systems for ibuprofen drug

In recent years, nanomaterial-based drug delivery carriers have become some of the most attractive to be studied. The purpose of this study is to investigate the interaction of C60 fullerene, carbon nanotube and graphene having porphyrin-like FeN4 clusters with a non-steroidal anti-inflammatory drug (ibuprofen) by means of the density functional theory. Results showed that the graphene with FeN4 clusters could remarkably increase the tendency of graphene for adsorption of ibuprofen drug. Also, our ultraviolet–visible results show that the electronic spectra of the complexes exhibit a blue shift toward lower wavelengths (higher energies). It was found that Ibp/FeN4-graphene had high chemical reactivity, which was important for binding of the drug onto the target site. In order to go further and gain insight into the binding features of considered systems with ibuprofen drug, the Atoms in Molecules analysis was performed. Our results determine the electrostatic features of the Ibp/FeN4-graphene bonding. Consequently, the results demonstrated that the FeN4-graphene could be used as potential carriers for the delivery of ibuprofen drug.     

Recent ultrasound advancements for the manipulation of nanobiomaterials and nanoformulations for drug delivery

Recent advances in ultrasound (US) have shown its great potential in biomedical applications as diagnostic and therapeutic tools. The coupling of US-assisted drug delivery systems with nanobiomaterials possessing tailor-made functions has been shown to remove the limitations of conventional drug delivery systems. The low-frequency US has significantly enhanced the targeted drug delivery effect and efficacy, reducing limitations posed by conventional treatments such as a limited therapeutic window. The acoustic cavitation effect induced by the US-mediated microbubbles (MBs) has been reported to replace drugs in certain acute diseases such as ischemic stroke. This review briefly discusses the US principles, with particular attention to the recent advancements in drug delivery applications. Furthermore, US-assisted drug delivery coupled with nanobiomaterials to treat different diseases (cancer, neurodegenerative disease, diabetes, thrombosis, and COVID-19) are discussed in detail. Finally, this review covers the future perspectives and challenges on the applications of US-mediated nanobiomaterials.     

Multifunctional, multicompartment polyorganosiloxane magnetic nanoparticles for biomedical applications

We present the synthesis and characterization of maghemite nanoparticles (average size 6±1.5 nm) and their incorporation into the core of polyorganosiloxane core-shell nanospheres (total average diameter 35±10 nm). The nanoparticles are easily redispersable in organic solvents and can subsequently be modified by grafting of end-functionalized poly(ethylene oxide) to obtain water soluble nanospheres. The network structure of the nanospheres allows the diffusion of small molecules into the nanospheres, and consequently the nanospheres can be employed as nanocontainers and nanoreactors for potential biomedical applications.     

Synthesis and characterization of cobalt/gold bimetallic nanoparticles

Cobalt/gold (Co/Au) bimetallic nanoparticles are prepared by chemically reducing gold (III) chloride to gold in the presence of pre-synthesized Co nanoparticles. Transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption spectrometry, and a superconducting quantum interference device (SQUID) magnetometer have been used to characterize as-prepared bimetallic nanoparticles. Our findings demonstrate Au not only grows onto Co nanoparticles, forming a surface coating, but also diffuses into Co nanoparticles. The introduction of Au alters the crystalline structure of Co nanoparticles and changes their magnetic properties. Dodecanethiols induce a reorganization of as-prepared Co/Au bimetallic nanoparticles.