Measurement of optical signals as a plasma propagation in the atmospheric pressure plasma jet columns

The propagation of plasma jets with argon gas is characterized in terms of two factors, the effect of electric field distribution along the tube and the effect of voltage polarity, from the observed results of optical signals along the entire column of plasma. The optical signal of plasma propagates from the high electric-field region of high-voltage electrode toward the low field region of the open air-space, regardless of the polarity of the voltage. The optical intensity and the propagation velocity are higher for the positive voltage than for the negative voltage. Moreover, the length of plasma plume exited from the end of the glass tube into the open air is shorter for the negative voltage. When the optical intensity is strong enough, a secondary peak signal follows the primary peak. In the plasma column on the inside of the glass tube, the optical intensity and the propagation velocity depend on the strength of the electric field; they are both high at the high-field region of voltage terminal and decay toward the end of the tube. The velocity is as fast as 10⁴ m/s at the high-field region and slows down to 10³ m/s at the low-field region of the glass-tube end. However, the plasma accelerates drastically to be (10⁴–10⁵) m/s after exiting the glass tube toward open air, even though the electric field is a quite low and thus the optical signal decays low before fading out. The experimental observations present in this report are explained with the propagation of the plasma diffusion waves.     

纳秒脉冲放电等离子体射流特性

采用单针式电极,使用单极性重复频率脉冲电源,在常压氦气、氩气、氮气和空气中得到等离子体射流,并改变电压、流量和气体种类,分别观察不同的实验条件对等离子体射流的影响。实验结果表明:射流长度随施加电压的增加而增长;随着流量的连续变化,射流长度先逐渐变长,达到峰值后由于湍流影响,长度又逐渐缩短,达到一定流量后趋于饱和。此外,不同工作气体中的等离子体射流呈现截然不同的外观,氦气和氩气中射流呈针状模式,长度可达7 cm以上;而在氮气和空气中,射流呈现为长度不超过2 cm的刷状模式。     

纳秒脉冲放电等离子体射流特性

采用单针式电极,使用单极性重复频率脉冲电源,在常压氦气、氩气、氮气和空气中得到等离子体射流,并改变电压、流量和气体种类,分别观察不同的实验条件对等离子体射流的影响。实验结果表明：射流长度随施加电压的增加而增长;随着流量的连续变化,射流长度先逐渐变长,达到峰值后由于湍流影响,长度又逐渐缩短,达到一定流量后趋于饱和。此外,不同工作气体中的等离子体射流呈现截然不同的外观,氦气和氩气中射流呈针状模式,长度可达7 cm以上;而在氮气和空气中,射流呈现为长度不超过2 cm的刷状模式。     

利用介质阻挡探针法测量大气压氦等离子体射流电子密度

分别利用电子的漂移速度和等离子体的传播速度计算了大气压下氦等离子体射流的电子密度。     

Basic characteristics of an atmospheric pressure rf generated plasma jet

A plasma jet has been developed which operates using radio frequency (rf) power and produces a stable homogeneous discharge at atmospheric pressure. Its discharge characteristics, especially the dependence of stable discharge operating range on the feed gas, were studied, and the electric parameters such as RMS current, RMS voltage and reflected power were obtained with different gas flows. These studies indicate that there is an optimum range of operation of the plasma jet for a filling with a gas mixture of He and O_2. Two "failure" modes of the discharge are identified. One is a filamentary arc when the input power is raised above a critical level, another is that the discharge disappears gradually as the addition of O_2 approaches 3.2%. Possible explanations for the two failure modes have been given. The current and voltage waveform measurements show that there is a clear phase shift between normal and failure modes. In addition, I－V curves as a function of pure helium and for 1% addition of oxygen have been studied.     

Polymerdimethylsiloxane surface treatment with an atmospheric pressure helium plasma jet driven by unipolar nanosecond pulses

A nanosecond-pulse power source transfers energy to electrons of atmospheric pressure discharges in a nanosecond-scale rising time and shows different plasma chemistry than a slowly varying sinusoidal discharge. We report how the operation parameters, such as applied voltage, pulse duration, and repetition frequency, affect the discharge characteristics and the surface property of polydimethylsiloxane (PDMS). The applied voltage controls the energy delivery per a pulse cycle, and the repetition frequency dominantly affects the plasma density in a long-term operation. The water contact angle, the optical emission spectroscopy, and the atomic force microscope diagnostics on the PDMS are presented. While the polarity of the nano pulse bias changes the emission length of the plasma jet, the hydrophilicity is not affected by it because the chemical reactions by radicals are more dominant than the physical reactions of charged particles on PDMS.     

微秒脉冲激励的大气压氦等离子体射流放电特性

研究了不同电极结构以及放电参数对微秒脉冲激励的氦等离子体射流放电特性的影响。实验中采用不同管内径、不同电极形状、不同重复频率等参数, 通过采集放电阶段的电流电压图、发光图像以及发射光谱等, 对等离子体射流的电学特性和光学特性进行诊断。实验结果表明, 随着管内直径的增大, 氦等离子体射流的长度减小;管内径为8 mm时, 等离子体射流的击穿电压与放电电流最小, 同时, 其发射光谱中第二正带系N2, N+2和O等高能活性粒子的强度最高;管内径为5 mm的等离子体射流的放电电流、功率及消耗的能量最大;在相同实验条件下, 针尖电极结构中的放电电流、消耗的功率还有发射光谱强度都较大;随着重复频率的增加, 氦等离子体射流的长度会增加, 但击穿电压减小。     

Temporal gas temperature of atmospheric pressure air plasma

In this paper, temporal gas temperature in plasma was measured by Rayleigh scattering in a passive way since synchronization was difficult due to the randomness of current pulses. The plasma was generated between a 10 mm pin-to-plane gap connected to a H.V DC voltage through a 130 MΩ resistor and a skin sample was placed on a grounded plate. Even the plasma can be touched by a human hand without any feeling of warmth, the peak temperature could be 337 K then decrease to 295 K over 60 μs at 1 mm. Moreover, the applied voltage dramatically affects peak current and the peak temperature. Therefore, the transient “high” temperature cannot be touched and the so-called “cold” plasma might not be “cold”.     

大气压氦气多路低温等离子体射流

为了研究大气压低温等离子体多路射流阵列的放电特性,设计一个实现7路低温等离子体射流的放电装置,采用单电极放电结构,在开放的大气环境下通入氦气。采用高压窄脉冲重复频率电源激励驱动该放电装置,电源脉冲宽度约230 ns,脉冲上升沿约为120 ns。在重复频率为500 Hz的条件下,通过高速摄影初步发现放电电流脉宽约为110 ns,且无反向放电。试验结果表明：平均射流长度随电压幅值增加而增加,在一定电压幅值时射流长度有达到饱和的趋势,这是由于射流通道尾部有空气进入,电压幅值已不再是主要原因;只有在合适的气体流量值时,才能够获得较长的平均射流长度,这是由于气体流量过大或过小时射流均不足以维持形成的放电通道;此外,中心电极放电射流长度受气体流量影响较大,气体流量在一定值时可以观察到中心电极有较长的射流,射流放电强度较弱,气体流量过大或过小时中心电极几乎无放电,这是由于四周电极更易形成放电射流,削弱了中心电极放电。 ,     

Helium/oxygen atmospheric pressure plasma jet treatment for hydrophilicity improvement of grey cotton knitted fabric

The influence of atmospheric pressure plasma jet (APPJ) treatment on the hydrophilicity of grey cotton knitted fabric (GCKF) was investigated. For comparison, specimens which had undergone different treatments were tested by contact angle measurement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), fourier-transform infrared attenuated total reflectance spectroscopy (FTIR-ATR) and X-ray diffraction (XRD). The results imply that helium/oxygen APPJ could improve the hydrophilicity of GCKF by modifying the surface properties. In addition, combining dewaxing processes with He/O₂ APPJ treatment was found to tremendously improve the hydrophilicity of GCKF. The mechanism of this was also confirmed by Ruthenium Red staining which showed most of pectic substances inside the cotton fiber existed beneath the waxy layer and on top of the cellulose microfibril.     

Surface cleaning of metal wire by atmospheric pressure plasma

In this study, the possible application of atmospheric pressure dielectric barrier discharge plasma for the annealing of metallic wire is examined and presented. The main purpose of the current study is to examine the surface cleaning effect for a cylindrical object by atmospheric pressure plasma. The experimental setup consists of a gas tank, plasma reactor, and power supply with control panel. The gas assists in the generation of plasma. Copper wire was used as an experimental cylindrical object. This copper wire was irradiated with the plasma, and the cleaning effect was confirmed. The result showed that it is possible to remove the tarnish which exists on the copper wire surface. The experiment reveals that atmospheric pressure plasma is usable for the surface cleaning of metal wire. However, it is necessary to examine the method for preventing oxidization of the copper wire.     

常压微波等离子体炬装置的模拟与设计

介绍了一台低成本的常压微波等离子体炬设备,给出了该设备构造及喷嘴的设计思路,分析了各种气体的非磁化微波等离子体的击穿电场强度,数值求解了设备中矩形TE103谐振腔中的电磁场分布,应用高频电磁场模拟分析软件HFSS优化了喷嘴在波导中的具体位置,并对优化后喷嘴周围的电场分布进行了模拟。模拟结果表明：微波输入有效功率为500 W,喷嘴伸出矩形波导1 mm时,喷嘴尖端处的电场强度在1.2×106 V·m-1以上,远大于氩气的击穿电场强度,更易于等离子体炬的激发。实验结果证明了模拟结果的正确性和装置的有效性。     

Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture

In this paper, an atmospheric pressure plasma jet sustained in pure argon and an argon/water vapour mixture has been used to modify the surface of polypropylene (PP) films. The gas temperature of the plasma jet was found to be 625 K in an active zone between the electrodes and was found to increase in the afterglow. Based on these results, the PP films are placed as close as possible to the edge of the capillary in order to avoid thermal damage to the polymer. XPS results on the untreated and modified PP samples revealed incorporation of a significant amount of oxygen on the polymer surface, however, this oxygen inclusion is more pronounced for the argon/water vapour jet due to the higher radicals density in the jet afterglow. One can therefore conclude that adding water vapour to an argon plasma jet can be a convenient way to increase the efficiency of plasma surface modification.     

常压双频驱动Ar/CCl4等离子体射流制备碳薄膜的研究

在大气压下双频Ar/CCl4 等离子体射流的驱动下,固定低频功率,通过改变射频功率在硅基底上制备了非晶态碳薄膜,并且通过程序进行相应的数值模拟计算。结果给出了不同功率下电子与离子的密度、温度、电场、电势、角度分布等参数对碳材料样品形貌的影响;样品变化趋势的预测及其原因的分析,以及与实验结果的对比。结果表明,对于双频大气压等离子体,射频可以独立控制等离子体的能量和反应强度,可以相对地控制产物。这为制备薄膜材料的形貌提供重要的实验基础。     

Development of a new atmospheric pressure cold plasma jet generator and application in sterilization

This paper reports that a new plasma generator at atmospheric pressure, which is composed of two homocentric cylindrical all-metal tubes, successfully generates a cold plasma jet. The inside tube electrode is connected to ground, the outside tube electrode is connected to a high-voltage power supply, and a dielectric layer is covered on the outside tube electrode. When the reactor is operated by low-frequency (6 kHz--20 kHz) AC supply in atmospheric pressure and argon is steadily fed as a discharge gas through inside tube electrode, a cold plasma jet is blown out into air and the plasma gas temperature is only 25--30℃. The electric character of the discharge is studied by using digital real-time oscilloscope (TDS 200-Series), and the discharge is capacitive. Preliminary results are presented on the decontamination of E.colis bacteria and Bacillus subtilis bacteria by this plasma jet, and an optical emission analysis of the plasma jet is presented in this paper. The ozone concentration generated by the plasma jet is 1.0×10¹⁶cm^-3 which is acquired by using the ultraviolet absorption spectroscopy.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

大气压冷等离子体射流研究进展

有许多种方法可用于在大气中产生等离子体射流,冷等离子体（离子温度在室温附近）射流即是其中的一种.近年来,人们发现氦气或其它惰性气体通过毛细管介质阻挡放电形成的冷等离子体射流具有类似子弹的传输特性,在有机材料表面改性、等离子体医学等领域获得了广泛的应用.通过专门设计的一系列实验,我们逐渐揭示了其产生机理,并深入研究了传输特性.文章简要介绍近年来我们所做的有关大气压冷等离子体的实验过程以及获得的一些重要结论.在对这种等离子体深入了解的基础上,作者还开发了一种新装置,该装置的最大特点是既利用了氦气在辅助放电方面的特性,又不消耗这种昂贵的资源;并且它还特别适合于在臭氧层修复、等离子体医学等方面的应用.     

����ѹ�����赲�����ŵ������ٶȷֲ��IJ���

通过测量大气压介质阻挡放电等离子体辐射信号,建立偶极子辐射模型,利用快速傅立叶变换,计算了大气压介质阻挡放电等离子体中离子速度分布。计算结果表明,速度分布偏离麦克斯韦分布,并且随着放电过程的进行,离子速度及相对离子数进行有规律的变化。     

Influence of absorbed moisture on desizing of poly(vinyl alcohol) on cotton fabrics during atmospheric pressure plasma jet treatment

This paper studies the influence of moisture absorption of cotton fabrics on the effectiveness of atmospheric pressure plasma jet (APPJ) on desizing of polyvinyl alcohol (PVA). Cotton fabrics with three different moisture regains (MR), namely 1.8%, 7.3%, and 28.4% corresponding to 10%, 65%, and 98% of relative humidity respectively, are treated for 16 s, 32 s, 48 s, and 64 s. X-ray photoelectron spectroscopy analysis indicates that the plasma treated PVA has higher oxygen concentration than the control. Mass loss results show that the fabric with the highest MR has the largest mass loss after 64 s plasma exposure. Solubility measurement reveals that the sample with the lowest MR has the highest desizing efficacy and the percent desizing ratio reaches 96% after 64 s exposure plus a 20 min hot wash, which is shown as clean as the unsized sample through scanning electron microscopy analysis. The yarn tensile strength test results show that APPJ has no negative effect on fabric tensile strength.     

微秒脉冲大气压氦气等离子体射流阵列特性

为了深入研究等离子射流阵列的放电特性,利用上升沿1μs、脉宽2μs的微秒脉冲电源产生等离子体射流,通过电压电流波形的测量和发光图像的拍摄,研究了在针-环双电极结构下,不同电极位置以及不同重复脉冲频率下氦气等离子体射流阵列的放电特性。实验结果表明放电最初产生在阵列的两端,随着外加电压幅值的增加,中心管也会有射流产生,最终形成射流阵列。随地电极距管口距离的变远,放电电流和中心管的射流长度均呈现出先增大后减小的变化趋势(20mm处取得最大值),随着重复脉冲频率的增大,放电由不均匀的丝状放电向均匀放电转变,放电电流先减小而后保持不变。