On the steering of sound energy through a supercritical plate by a near-field transducer array

The ability to direct sound energy through the flexural vibrations of a submerged plate at various angles of incidence using a near-field transducer array is investigated. An alumina bar is placed in front of a one-dimensional, eight-element transducer array, between the array and the water. Operating in a receive mode, data were taken as a function of angle of incidence and compared to data taken without the presence of the alumina bar. The array was also operated in transmit mode and results were compared to corresponding receive mode data, showing that reciprocity holds. Results show that in fact sound energy can be steered through a plate, and that the measurement method used provides a convenient method of measuring the angular dependence of transmission through a plate, including measurements at frequencies above the plate's critical frequency. Experimental results of sound transmission versus angle of incidence of finite sized plates agree qualitatively with theoretical results from an analysis of the transmission through an unbounded flexible partition.     

一种性能稳定的新单元频率选择表面

通过对十字孔径单元的四个端点添加L形的孔径,给出了一种新单元的频率选择表面(FSS)设计,同时通过拆分,得到了相对应的拆分单元FSS.利用谱域法,对两种FSS结构从理论上进行了分析,在TE波入射时角度变化、大角度入射时极化变化对中心频率的影响以及通带带宽三个方面进行了研究,并采用镀膜和光刻技术制备了两种FSS结构的实验样件,在微波暗室中进行测试,得到的实验曲线与理论仿真曲线基本一致.结果表明：新单元的两种FSS结构的中心频率均能在TE波入射时实现角度稳定性和大角度入射时实现极化稳定性;拆分单元FSS的中心 关键词： 频率选择表面(FSS) 新单元 极化稳定性 角度稳定性     

Reflection of Lamb waves obliquely incident on the free edge of a plate

The reflection of obliquely incident symmetric and anti-symmetric Lamb wave modes at the edge of a plate is studied. Both in-plane and Shear-Horizontal (SH) reflected wave modes are spawned by an obliquely incident in-plane Lamb wave mode. Energy reflection coefficients are calculated for the reflected wave modes as a function of frequency and angle of incidence. This is done by using the method of orthogonal mode decomposition and by enforcing traction free conditions at the plate edge using the method of collocation. A PZT sensor network, affixed to an Aluminum plate, is used to experimentally verify the predictions of the analysis. Experimental results provide support for the analytically determined results.     

The correlation between frequency difference and mode polarization in an intracavity birefringent dual-frequency laser

We discuss the correlations between the measured lasing-mode frequency difference and the mode polarization angle in an intracavity birefringent dual-frequency laser. The frequency difference and polarization are adjusted by rotating an intracavity quartz crystal through a large angular range. We propose two kinds of frequency difference: the equal-order frequency difference and the adjacent frequency difference. By measuring the equal-order frequency difference versus the quartz crystal rotation angle, the real physical process behind frequency splitting is revealed. Based on this, the adjacent frequency difference curve is also obtained. The emitted laser beam polarization angle is also measured for large rotations of the intracavity quartz crystal. These measurements reveal the complete process of optical activity in frequency splitting and allow us to predict the trends of frequency difference and polarization angle for large quartz crystal rotation angles. We analyze the correlations between the equal-order frequency difference and the polarization angle based on the experimental results, which show that the certain points on the two curves are inter-related. The principal results agree well with the optical theory of crystals.     

微波低通高阻复合材料构件的设计与性能验证

随着海洋环境武器装备隐身发展的需要, 开展具有微波低通高阻特性的复合材料构件设计与研究显得重要而迫切. 文章首先设计了一种中空六边形周期性结构, 以此为基础设计了一个由面层、中空六边形环周期层1、中间层、中空六边形环周期层2、面层组成的新型复合双层频率选择表面(FSS)结构件. 其上层FSS的结构参数为中空六边形环边长3.0 mm, 线宽度0.5 mm, 缝隙宽度0.4 mm; 下层FSS的结构参数为中空六边形环的边长3.2 mm, 线宽度0.5 mm, 缝隙宽度1.0 mm. 模拟结果表明: 该复合材料构件具备优良的低频透过性与高频屏蔽性快速转换的特性, 能够获得优异的低通高阻性能, 同时在45°范围内具备优良的角度不敏感性. 最后制备和实验验证得到了0–2 GHz低频段具有95.6%高透过性、同时在7.05–18 GHz高频段具有10 dB 以上屏蔽性能的复合材料构件, 对具有隐身特性的新型滤波电磁功能构件的研制具有重要价值.     

Generation of millimeter wave Gaussian beams and their propagation in a dielectric waveguide

Linearly polarized fundamental mode Gaussian beams were generated and coupled to a hollow circular oversized dielectric waveguide by placing the waist of the beam at the guide entrance. The transmission properties of the waveguide were characterized as a function of frequency for a variety of coupling conditions. These conditions included changes in the input beam waist radius, angle of incidence, and displacement perpendicular and parallel to the guide axis. It has been found that: 1.) power transmission is maximized when the waist of the input beam is centered at the guide input, injected normally, and has a radius of 0.43 times the waveguide radius, 2.) power transmission decreases rapidly with increasing angle of incidence and the rate of that loss increases with frequency, 3.) the waveguide preserves the linear polarization of the input beam, 4.) power transmission in the fundamental waveguide mode is not greatly affected by moderate displacements in the input beam position, and 5.) upon exit from the waveguide the launched EH₁₁ mode propagates as a fundamental mode Gaussian beam in the quasi-far field. The results compare favorably to the transmission theory of Belland and Crenn and approximately to the near and far field mode pattern theory of Degnan.     

Interaction of a bounded ultrasonic beam with a thin inclusion inside a plate

A theoretical study of the reflection of a two-dimensional Gaussian ultrasonic beam, incident at a Lamb angle of a plate containing a thin rectangular inclusion at an arbitrary position, is presented on the basis radiation mode theory. The inclusion is parallel to the plate surface and its thickness is assumed to be much smaller than the ultrasonic wavelength. It is shown that the amplitude and phase of the reflected beam profile can be used for accurate inclusion characterization. However, this only holds for certain internal positions of the inclusion and for material combinations that do not strongly perturb the excitation of Lamb waves in the plate. When these conditions are satisfied, it is possible to define the Lamb waves and the associated experimental conditions for which good estimates can be obtained of the position of the beginning point of the inclusion as well as of the length and the thickness of the inclusion.     

采用单个压电传感器的单模式兰姆波激发频率的选择

考虑了压电传感器(PZT)与板之间的耦合作用,从理论上研究了单个压电传感器激发时产生单模式兰姆波的频率调节方法,实验给出了模式选择在兰姆波结构健康监测中的应用. 在板材、板厚以及PZT尺寸一定的情况下,从理论上能够预测到作为频率函数的各兰姆波模式的幅值变化. 根据某特定兰姆波模式的幅值最大而其他模式幅值相对最小时所对应的频率,即可识别出该兰姆波模式优化的激发频率. 数值仿真验证了理论的有效性以及单模式兰姆波选择的可能性. 在不同的激发频率下,分别激发了优化的A0 模式,优化的S0模式以及共存的A0和S0模 关键词： 兰姆波 压电传感器 激发频率 结构健康监测     

一种多频局域共振型声子晶体板的低频带隙与减振特性

设计了一种多频局域共振型声子晶体板结构, 该结构由一薄板上附加周期性排列的多个双悬臂梁式子结构而构成. 由于多个双悬臂梁式子结构的低频振动与薄板振动的相互耦合作用, 这种局域共振型板结构可产生多个低频弯曲波带隙(禁带); 带隙频率范围内的板弯曲波会被禁止传播, 利用带隙可以实现对薄板的多个目标频率处低频减振. 本文针对这种局域共振型板结构进行了简化, 并基于平面波展开法建立了其弯曲波带隙计算理论模型; 基于该模型, 结合具体算例进行了带隙特性理论分析. 设计、制备了一种存在两个低频弯曲波带隙的局域共振型板结构样件, 通过激光扫描测振仪测试证实该结构存在两个低频带隙, 在带隙频率范围的板弯曲振动被显著衰减.     

Influence of the electric field frequency on the performance of a RF excited CO2 waveguide laser

An analysis is presented of the effect of the RF frequency on the active media of CO₂ waveguide lasers. It is found that the characteristics are improved with increasing RF frequency because the space charge sheath width decreases with increasing excitation frequency. We also found that the sheath width decreases with the discharge current; this fact was never discussed before. The higher the exciting frequency the higher is the maximum input power of the discharge in the stable low current mode. It is attractive to extend the input power while keeping the discharge in this mode. Finally, a stabilizing excitation technique is described for the inherent unstable region of the discharge.     

Numerical description of the edge mode at the beveled extremity of a plate

This paper deals with the reflection of a two-dimensional harmonic Lamb wave at the beveled end of a plate. The existence of a resonant edge mode is described by a numerical model. It is proved that the edge mode is the resonance of different complex modes. The behavior of this mode as a function of the bevel angle is studied. Its amplitude decreases and its resonance frequency shifts as the bevel angle decreases from 90 to 85 deg. An unexpected strong variation of the repartition of the reflected energy is linked to this phenomenon.     

A frequency domain numerical method for airfoil broadband self-noise prediction

This paper describes a numerical approach, based in the frequency domain, for predicting the broadband self-noise radiation due to an airfoil situated in a smooth mean flow. Noise is generated by the interaction between the boundary layer turbulence on the airfoil surface and the airfoil trailing edge. Thin airfoil theory is used to deduce the unsteady blade loading. In this paper, the important difference with much of the previous work dealing with trailing edge noise is that the integration of the surface sources for computation of the radiated sound field is evaluated on the actual airfoil surface rather than in the mean-chord plane. The assumption of flat plate geometry in the calculation of radiation is therefore avoided. Moreover, the solution is valid in both near and far fields and reduces to the analytic solution due to Amiet when the airfoil collapses to a flat plate with large span, and the measurement point is taken to the far field.Predictions of the airfoil broadband self-noise radiation presented here are shown to be in reasonable agreement with the predictions obtained using the Brooks approach, which are based on a comprehensive database of experimental data. Also investigated in this paper is the effect on the broadband noise prediction of relaxing the ‘frozen-gust’ assumption, whereby the turbulence at each frequency comprises a continuous spectrum of streamwise wavenumber components. It is shown that making the frozen gust assumption yields an under-prediction of the noise spectrum by approximately 2dB compared with that obtained when this assumption is relaxed, with the largest occurring at high frequencies.This paper concludes with a comparison of the broadband noise directivity for a flat-plat, a NACA 0012 and a NACA 0024 airfoil at non-zero angle of attack. Differences of up to 20 dB are predicted, with the largest difference occurring at a radiation angle of zero degrees relative to the airfoil mean centre line.     

Zeeman双频激光器频率分裂与纵模间隔变动一致性分析

激光谐振腔内相位各向异性会引起频率分裂,两分裂模的频差大小由表现出的相位延迟所决定.对于腔内相位延迟较小的He-Ne激光器,两分裂模很接近,处于烧孔重叠区,存在模式竞争而不能同时振荡,形成隐频率分裂.同时,使得激光器两正交偏振方向上的相邻级纵模产生固定的变动量,其大小等于隐频率分裂量的2倍.如果沿激光偏振方向施加横向磁场,Ne原子谱线发生横向Zeeman分裂,增益原子分成两群,分别为平行于磁场和垂直于磁场方向偏振的光提供增益,大大减弱模竞争,使得激光器的两分裂模可同时振荡并测得频差.在谐振腔内放入倾斜的石英晶体片或半波片,由两种方法分别测量频率分裂量并进行比较.实验表明两种方法测量的结果均与理论计算相符,平均相对偏差不超过1%.据此可以准确得到Zeeman双频激光器的频差大小,并为半波片测量提供了新方法.     

Radiation efficiency of a baffled circular plate in flexural vibration

The radiation efficiency of an edge-clamped circular plate, which is vibrating flexurally in one of its natural modes and is mounted in an infinite baffle, is theoretically determined from the total power radiated to the far field. The vibrations of the plate are investigated both by the classical plate theory and by the improved plate theory (Mindlin plate theory). Approximation formulae for the low frequency region are derived, and curves covering the entire frequency range for the first fifteen modes are obtained through numerical calculation. Except for frequencies much higher than the critical frequency, there exist some differences in the radiation efficiencies between the results obtainedby the two theories. The difference increases with the thickness of the plate and with the mode numbers, especially for modes having many nodal diameters.     

热声回热器结构频率的数值研究

介绍了声波在结构中的几种表现形式,综合考虑结构声传播过程中的色散现象会影响结构和流体的声耦合,将结构声理论运用于热声系统回热器内结构振动的分析。通过采用Ansys软件对回热器中薄板建立模型并分析其振动模态。结果显示:(1)回热器中薄板结构主要受弯曲波作用,振动时发生弯曲变形;(2)薄板振动模态的固有频率随板厚度减小而降低,随长度减小而增加;(3)薄板振动模态随阶数升高而趋于复杂,相应的固有频率值由数十赫兹发展到数千赫兹,包含热声系统谐振频率的工作区间。     

Dynamic vibration absorbers for vibration control within a frequency band

The use of dynamic vibration absorbers to control the vibration of a structure in both narrow and broadbands is discussed in this paper. As a benchmark problem, a plate incorporating multiple vibration absorbers is formulated, leading to an analytical solution when the number of absorbers yields one. Using this analytical solution, control mechanisms of the vibration absorber in different frequency bandwidths are studied; the coupling properties due to the introduction of the absorber into the host structure are analyzed; and the control performance of the absorber in different control bandwidths is examined with respect to its damping and location. It is found that the interaction between the plate and the absorber by means of the reaction force from the absorber plays a dominant role in a narrow band control, while in a relatively broadband control the dissipation by the absorber damping governs the control performance. When control bandwidth further enlarges, the optimal locations of the absorbers are not only affected by the targeted mode, but also by the other plate modes. These locations need to be determined after establishing a trade-off between the targeted mode and other modes involved in the coupling. Finally, numerical findings are assessed based on a simply-supported plate and a fair agreement between the predicted and measured results is obtained.     

基于有源超表面的导电板雷达截面增强捷变设计

提出了一种使用散射方向图的动态可重构以实现雷达散射截面增强的捷变设计方法。结合变容二极管加载,使用具有嵌入式偏置回路的物理单元,所提出的有源超表面可以在具有梯度电压的外加直流偏置下,对平面电磁波的正入射或斜入射产生可电调的反射系数相位分布,以达到对反射波角度的灵活重定向,进而有助于单站或双站雷达散射截面增强的捷变效果。以导电平板为例,对三种不同的入射反射场景进行了计算与全波仿真,在设计频率10 GHz处,所提出的设计产生了可重构的散射方向图,表明了该设计对反射波角度的实时控制,并结合实验测量验证了单站与双站雷达散射截面的有效增强结果。     

Diffraction Theory by Means of Singular Integral Equations VI Diffraction of Plane Waves by an Infinite Strip Grating

For an infinite plane grating formed by strips and gaps of equal width, a Dirichlet boundary value problem for the Helmholtz equation is solved rigorously by function-theoretic techniques. Plane wave excitation with an arbitrary angle of incidence is considered. The high frequency asymptotics of the solution is completely evaluated and compared with Kirchhoff's diffraction theory as well as with the asymptotics for a single strip. Extensive numerical data are laid down graphically.     

一种性能稳定的新Y形单元厚屏频率选择表面

厚屏频率选择表面(FSS) 能克服双层或多层薄屏FSS级联引起的结构复杂和中心频率透过率容易降低的不利影响, 并且在拓展FSS带宽方面具有优势, 这使其在曲面隐身雷达天线罩应用方面有潜在的价值. 但是, 当电磁波以大范围角度入射时, 中心频率可能会随入射角度的变化而漂移, 而且在大角度入射时不易实现极化稳定性. 本文针对此问题, 设计了一种新Y形单元厚屏FSS, 利用模式匹配法对此结构进行分析计算, 并研究TE, TM波入射时角度变化及大角度入射时极化变化对通带带宽、 中心频率及其透过率的影响. 仿真实验结果表明: 新Y形单元厚屏FSS的中心频率在TE, TM波入射时均能实现角度稳定性和大角度入射时的极化稳定性. 这为FSS在曲面隐身雷达天线罩上的应用提供了一种借鉴.