A critical review on the stability constants of the fluoride complexes of actinides in aqueous solution and their correlation with fundamental properties of the ions

Literature data on the stability constants of the fluoride complexes of the actinides in different oxidation states have been compiled. In order to have a reasonable inter-comparison, the stability constant (β₁) values obtained in diverse ionic strength media are converted to so called thermodynamic stability constants, β ₁ ⁰ using the DAVIES equation (a modification of Debye-Huckel equation). A correlation of the β ₁ ⁰ values with the fundamental properties of the actinide ions using various models available in the literature has been attempted. Using the values of inonic radii and best available values of the stability constants of a large number of metal ions from recent compilations a comparative study of the various models or relations available in the literature has been tried. For metal ions in general, the semi-empirical relation recently developed by BROWN, SYLVA and ELLIS (BSE equation)_gives the best correlation. In an attempt to accommodate the unusual trend in the stability constants of the tetravalent actinides a modification in a parameter of the BSE equation has been proposed. Good agreement between the theoretically calculated and experimentally determined values for actinides in different oxidation states is obtained in most of the cases. Further improvements in theoretical relation as well as experimental data are required for better correlation.     

Determination and comparison of stability constants of tungsten(VI) and molybdenum(VI) with nitrilotriacetic acid and glutamic acid at different ionic strengths

The formation constants of species formed in the systems H⁺?+?W(VI)?+?nitrilotriacetic acid (NTA) and H⁺?+?NTA have been determined in aqueous solution for pH?=?4–9 at 25°C and different ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 NaClO₄, using potentiometric and spectrophotometric techniques. It was shown that tungsten(VI) forms a mononuclear 1?:?1 complex with NTA of the type WO₃L^3? at pH?=?7.5. The composition of the complex was determined by the continuous variations method. The complexation of molybdenum(VI) with glutamic acid was investigated in aqueous solution ranging in pH from 4 to 9, using polarimetric, potentiometric and spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum(VI) forms a mononuclear 1?:?1 complex with glutamic acid of the type MoO₃L^2? at pH?=?6.0. The dissociation constants of glutamic acid and the stability constants of the complex were determined at 25°C and at ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 sodium perchlorate. In both complex formation reactions the dependence of the dissociation and stability constants on ionic strength is described by a Debye-Huckel type equation. Finally, a comparison has been made between the patterns of ionic strength dependence for the two complexes and the results have been compared with data previously reported.     

Potentiometric Study of the Chelates of Al(III), Ce(IV) and Th(IV) with Alizarin Red S

The stepwise metal-ligand stability constants of ARS chelates with Al³⁺, Ce¹⁺ and Th⁴⁺ have been determined by using Bjerrum-Calvin technique. Various computational methods were used to determine the stability constants. The thermodynamic stability constants were also calculated by determining the stepwise stability constants at various ionic strengths and then by extrapolating to zero ionic strength. The order of stability constants was found to be: Th>Al>Ce.     

Aspects of Degradation Kinetics of Azithromycin in Aqueous Solution

The chemical stability of azithromycin (AZM) in aqueous solution has been investigated utilizing a stability-indicating LC assay with ultraviolet detection. The degradation kinetics were studied as functions of pH (4–7.2), buffer composition (phosphate, acetate, and citrate), buffer concentration, ionic strength, drug concentration and temperature. The observed rate obtained by measuring the remaining intact AZM was shown to follow pseudo-first-order kinetics. The maximum stability of AZM occured at an approximate pH 6.3 in 0.05 M potassium phosphate. The observed degradation rate increased with ionic strength, buffer concentration and obeyed the Arrhenius equation over the temperature range investigated (70–100 °C). The apparent energy of activation (E _a) for AZM in solution was found to be 96.8 kJ mol^?1 and by application of the Arrhenius equation the stability at 25 °C (k ₂₅) and 40 °C (k ₄₀) had been predicted. Moreover, the degradation rate of AZM was independent on its initial concentration. Trace metal ions are unlikely to be involved in the degradation of AZM in aqueous solution. The major degradation product of AZM in aqueous solution was isolated and identified by LC–MS–MS and ¹H and ¹³C NMR spectra.     

Physico-chemical studies on the chelation behaviour of acenaphthenequinone monothiosemicarbazone (AQTS) with some bivalent metal ions

Summary The stability constants of the chelates formed from acenaphthenequinone monothiosemicarbazone and magnesium(II), manganese(II), cobalt(II), nickel(II), copper(II), zinc(II) or cadmium(II) have been determined pH-metrically in 75% v/v aqueous dioxan at various ionic strengths of NaClO₄ and at different temperatures. The method of Bjerrum and Calvin^{(1, 2)} as modified by Irving and Rossotti⁽³⁾, has been used to determine the ñ and pL values. The stability constants were calculated on an IBM 360 FORTRAN-IV computer patterned after that of Sullivanet al. ⁽⁴⁾ to give _n values using a weighted least squares method. The S_min, values were also calculated. The thermodynamic stability constant has been determined by extrapolating the log K₁ vs plot at zero ionic strength. The other thermodynamic functions have been calculated from the stability constants obtained for different temperatures at constant ionic strength. The bivalent metal stability sequence of AQTS chelates is in agreement with reported metal orders for other chelating reagents. The order of free energies and enthalpies of chelate formation for AQTS are: Mn²⁺2+2+2+>Zn²⁺.     

Performance assessment of hybrid multiblock copolymers included with ionic liquid for fuel cell applications

To improve the proton conductivity and thermal stability of proton exchange membrane, hybrid poly (arylene ether) multiblock copolymers were synthesized by using 6F-bisphenol A monomer. The hydrophobic oligomers poly (arylene ether sulfone) containing 6F-bisphenol A with varying molecular weight were copolymerised with hydrophilic oligomer disulfonated poly (arylene ether ketone) containing pendant carboxylic acid group to prepare multiblock copolymers. For further enhancing the proton conductivity, ionic liquid is embedded into the synthesized multiblock copolymers to fabricate the hybrid multiblock membranes. The ¹H NMR studies confirmed the synthesis of oligomers and multiblock copolymers whereas the FT-IR spectra revealed the interaction of ionic liquid with the multiblock copolymers. The proton conductivity of the membranes has also been examined at different temperatures and the activation energy required for the proton transport was calculated by using Arrhenius equation. At 30 °C, the maximum proton conductivity of 0.14 S/cm were shown by hybrid membrane (with 50% ionic liquid, 6FB1/I.L-50%), which is of 3.5 times greater than that of pristine 6FB1 membrane. Compared with pristine membranes, the hybrid membranes exhibit improved oxidative, thermal and mechanical stability. Moreover, the scanning electron microscopy (SEM) investigation depicts better phase separation in hybrid membranes than pristine membranes by forming ionic clusters. The membranes have been tested in H₂/O₂ fuel cell and their performance is compared with the state-of-art Nafion 117 membrane.     

Comparison of the application of Debye-Huckel and specific ion interaction theories for the complexation of tungsten(VI) with ethylenediaminediacetic acid

Equilibrium of the reaction of tungsten(VI) with ethylenediaminediacetic acid (EDDA) has been investigated in aqueous solution of pH 7.5 and 25°C. All measurements have been carried out at different ionic strengths ranging from (0.1 to 1.0) mol dm⁻³ (NaClO₄). According to our results the metal to ligand ratio is 1: 1. Stability constants and stoichiometry of the complex have been determined from a combination of potentiometric and UV spectroscopic measurements. In this semi-empirical model, two parameters have been introduced in a Debye-Huckel type equation based on the Gauss—Newton nonlinear least-squares method and minimizing the sum of the squares of the errors. Comparison of the ionic strength effect on these complex formation reactions has been made using a Debye-Huckel type equation and Bronsted—Guggenheim—Scatchard specific ion interaction theory (SIT). Published in Russian in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 5, pp. 864–868. The article is published in the original     

Ionic strength dependence of formation constants, protonation, and complexation of aspartic acid with dioxovanadium (V)

The stability constants of complexes of dioxovanadium (V) ion and L-asparrtic acid were determined potentiometrically at various ionic strengths of I = 0.1, 0.3, 0.5, and 0.7 mol. dm⁻³ at 25°C. A sodium chloride solution was used to maintain the ionic strength. The parameters based on these formation constants were calculated and the dependence of protonation and the stability constants on ionic strength are described by a Debye-Huckel type equation.     

Thermodynamic study of the complexation processes between 6,7-dihydro-3(H)-6-methyl-5-methoxy-7-oxo-vic-triazolo (4,5-d) pyrimidine and Cu(II), Zn(II), Cd(II) and Hg(II)

The compound 6,7-dihydro-3(H)-6-methyl-5-methoxy-7-oxo-vic-triazolo (4,5-d) pyrimidine (LH) has been characterized by IR, ¹H-NMR and UV-visible spectroscopy. Furthermore, its acid behaviour in aqueous solutions at variable temperatures and ionic strengths have been studied.The stability constants of the complexes formed by LH with Cu(II), Zn(II), Cd(II) and Hg(II) metal ions at different ionic strengths and temperatures have been calculated by the method of Chabereck and Martell. From these data, the thermodynamic functions for the corresponding complexation processes have been obtained.     

Ionic strength dependence of stability constants,complexation of W(VI) with iminodiacetic acid

The equilibria between tungsten(VI) and iminodiacetic acid (IDA) have been studied in aqueous solution. The stoichiometry and stability constants of the complexes formed are determined from a combination of potentiometric and Uv spectroscopic measurements. All measurements are carried out at 25°C, pH 7.5 and different ionic strengths ranging from (0.1 to 1.0) mol dm⁻³ (NaClO₄). According to these results, tungsten(VI) forms a mononuclear complex with IDA of the type (WO₃L²⁻). By introducing two empirical parameters C and D in the complex-formation reaction between tungsten(VI) and IDA, the dependence of the dissociation and stability constants on ionic strength is described by a modified Debye-Huckel-type equation. Finally, a pattern for the ionic strength dependence is obtained.     

Komplexone XLVII. The Stability of Palladium(II) Complexes with Aminopolycarboxylate Anions

The formation of Pd(II) complexes with aminopolycarboxylate anions has been investigated using pH and UV.-spectrophotometric measurements at ionic strength 1 M and 20°. In some cases bromide or thiocyanate ions have been used as auxiliary ligands. Pd²⁺ forms the strongest complexes of the hitherto investigated divalent metal ions. The stability constants are discussed in relation to the particular stereochemistry of Pd(II) complexes.     

Design of functional guanidinium ionic liquid aqueous two-phase systems for the efficient purification of protein

A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been devised and synthesized based on 1,1,3,3-tetramethylguanidine. The structures of the ionic liquids (ILs) were confirmed by ¹H nuclear magnetic resonance (¹H NMR) and 13C nuclear magnetic resonance (13C NMR) and the production yields were all above 90%. Functional guanidinium ionic liquid aqueous two-phase systems (FGIL-ATPSs) have been first designed with these functional guanidinium ILs and phosphate solution for the purification of protein. After phase separation, proteins had transferred into the IL-rich phase and the concentrations of proteins were determined by measuring the absorbance at 278 nm using an ultra violet visible (UV–vis) spectrophotometer. The advantages of FGIL-ATPSs were compared with ordinary ionic liquid aqueous two-phase systems (IL-ATPSs). The proposed FGIL-ATPS has been applied to purify lysozyme, trypsin, ovalbumin and bovine serum albumin. Single factor experiments were used to research the effects of the process, such as the amount of ionic liquid (IL), the concentration of salt solution, temperature and the amount of protein. The purification efficiency reaches to 97.05%. The secondary structure of protein during the experimental process was observed upon investigation using UV–vis spectrophotometer, Fourier-transform infrared spectroscopy (FT-IR) and circular dichroism spectrum (CD spectrum). The precision, stability and repeatability of the process were investigated. The mechanisms of purification were researched by dynamic light scattering (DLS), determination of the conductivity and transmission electron microscopy (TEM). It was suggested that aggregation and embrace phenomenon play a significant role in the purification of proteins. All the results show that FGIL-ATPSs have huge potential to offer new possibility in the purification of proteins.     

Ionic strength dependence of formation constants, complexation of nitrilotriacetic acid with tungsten(VI) ion

The dependence on ionic strength of protonation of nitrilotriacetic acid and its complexation with W(VI) is reported in sodium perchlorate, sodium nitrate and sodium chloride solutions as background salts. The measurements have been performed at 25°C and various ionic strengths in the range 0.1–1.0 mol dm⁻³, using a combination of potentiometric and spectrophotometric techniques. The overall analysis of the present and the previous data dealing with the determination of stability constants at different ionic strengths allowed us to obtain a general equation, by which a formation constant determined at a fixed ionic strength can be calculated, with a good approximation, at another ionic strength, if 0.1 ≤ ionic strength ≤ 1.0 mol dm⁻³ sodium perchlorate, sodium nitrate or sodium chloride.     

Ion-solvent and ion-ion interactions of NaCl aqueous and aqueous maltose solutions at 298–323 K on viscosity data

Viscosities of sodium chloride in concentration range 1 × 10^?2 to 9 × 10^?2 ± 0.001 mol dm^?3, have been determined in aqueous and aqueous maltose systems (1.0 to 9.0 wt %) at different temperatures (298 to 323 K). The viscosity data have been analyzed by using Jones-Dole equation and the derived parameters A and B coefficients were also calculated. The data obtained from viscometric studies has been used to investigate the ion-solvent interaction and ion-ion interaction. Thermal effects on the ionic interactions were also examined under the light of transition state theory.     

Quantum design of ionic liquids for extreme chemical inertness and a new theory of the glass transition

In many modern technologies (such as batteries and supercapacitors), there is a strong need for redox-stable ionic liquids. Experimentally, the stability of ionic liquids can be quantified by the voltage range over which electron tunneling does not occur, but so far, quantum theory has not been applied systematically to this problem. Here, we report the electrochemical reduction of a series of quaternary ammonium cations in the presence of bis(trifluoromethylsulfonyl)imide (TFSI) anions and use nonadiabatic electron transfer theory to explicate the results. We find that increasing the chain length of the alkyl groups confers improved chemical inertness at all accessible temperatures. Simultaneously, decreasing the symmetry of the quaternary ammonium cations lowers the melting points of the corresponding ionic liquids, in two cases yielding highly inert solvents at room temperature. These are called hexyltriethylammonium TFSI (HTE-TFSI) and butyltrimethylammonium TFSI (BTM-TFSI). Indeed, the latter are two of the most redox-stable solvents in the history of electrochemistry. To gain insight into their properties, very high precision electrical conductivity measurements have been carried out in the range +20 °C to +190 °C. In both cases, the data conform to the Vogel-Tammann-Fulcher (VTF) equation with “six nines” precision (R ²?>?0.999999). The critical temperature for the onset of conductivity coincides with the glass transition temperature T _g. This is compelling evidence that ionic liquids are, in fact, softened glasses. Finally, by focusing on the previously unsuspected connection between the molecular degrees of freedom of ionic liquids and their bulk conductivities, we are able to propose a new theory of the glass transition. This should have utility far beyond ionic liquids, in areas as diverse as glassy metals and polymer science.     

The influence of ionic liquid's nature on free radical polymerization of vinyl monomers and ionic conductivity of the obtained polymeric materials

Various 1,3‐dialkylimidazolium and tetraalkylphosphonium ionic liquids (ILs), including novel ones, have been studied as reaction media for free radical polymerization of methyl methacrylate (MMA), acrylonitrile (AN) and 1‐vinyl‐3‐ethylimidazolium salts (ViEtIm⁺)Y^?. The influence of IL's nature upon the polymer formulation was investigated. The use of different ionic liquids allows not only to obtain the polymers with high molecular weight (PMMA, up to 5,770,000 g/mol; PAN, up to 735,000 g/mol and poly[(ViEtIm⁺)Y^?], up to 1,130,000 g/mol) in high yields, but also to control the polymerization rate and molecular mass. The physicochemical characteristics, including mechanical properties, thermal stability and heat‐resistance of the obtained polymers were studied in order to compare with those of polymers prepared in a traditional media. It was found that elongation, tensile modulus and strength of PAN, which was synthesized in ionic liquid, are reliatively higher. The influence of IL's nature upon their ionic conductivity and the formation of conductive polymers from molten‐salt‐type vinyl monomers was investigated. Molecular design of the polymers simultaneously with the influence of IL's nature in order to achieve higher ionic conductivity is discussed. Flexible, transparent polymer films, obtained in different ways, show relatively high ionic conductivity (of about 10^?5 S cm^?1 at 20°C). Copyright © 2006 John Wiley & Sons, Ltd.     

Determination of Solvatochromic Regression Coefficients for the Molybdenum(VI) Complex with Ethylenediamine‐N,N′‐diacetic Acid by Using Kamlet‐Abboud‐Taft Equation

The Solver, Microsoft Excel 2000 powerful optimization package, has been used to perform non‐linear least‐squares curve fitting on the basis of Gauss‐Newton method for the calculation of solvatochromic regression coefficients for the complexation of molybdenum(VI) with ethylenediamine‐N,N′‐diacetic acid and dissociation constants at 25°C and constant ionic strength 0.1 mol·L⁻¹ sodium perchlorate in different aqueous solutions of methanol. A combination of potentiometric and UV spectrophotometric methods have been used for experimental studies. Non specific and specific solute‐solvent interactions were interpreted by correlating the equilibrium data with solvent parameters using the Kamlet‐Abboud‐Taft solvatochromic equation. Finally the influence of the solvent on the stability of the complex was discussed on the basis of the correlation results and the contribution of α (hydrogen‐bond donor acidity), β (hydrogen‐bond acceptor basicity) and π* (dipolarity/polarizability) parameters.     

A new method of determination of radii of ions with arbitrary effective charges

An equation for calculation of the radii of ions with an arbitrary effective charge has been derived. The ionic radii of halogens, chalcogens, and other atoms with different charges have been calculated. Under the assumption of pure ionic bond character, these values have been used for calculating the R ₁₂ distances for a large group of different molecules—halogens, interhalides, oxygen, chalcogens, and nitrogen and their compounds—by the previously derived equation for the a priori determination of internuclear distances. The error of calculation of the internuclear distance for halogens and interhalides is no more than 0.07 Å (3–4%). The internuclear distance in dihalogen cations Hal ₂ ⁺ and binary ionic molecules of p elements and their oxides and sulfides have been calculated. It has been demonstrated that the coordination (environment) of atoms should be taken into account and that there is a possibility of estimating the bond multiplicity and the character of bonding electron pairs in a molecule.     

A functionalised ionic liquid: 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride

An ionic liquid (IL) containing an appended 3-chloro-2-hydroxypropyl functionality group 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride was synthesised by the reaction of N-methyl imidazole, hydrochloric acid and epichlorohydrin. The ionic liquid showed reasonably high conductivity and heat stability up to 230°C. Its structures were characterised by FT-IR, ¹H NMR and ¹³C NMR spectra. The physical characteristics of the ionic liquid, such as conductivity and solvation abilities have been investigated. Due to its high polarity, the IL is able to dissolve many inorganic salts, and due to hydroxyl-rich microenvironment, it is able to dissolve cellulose go up to 10 (wt%). The ILs can be used for synthesising other ILs or polyelectrolyte.     

Design of guanidinium ionic liquid based microwave‐assisted extraction for the efficient extraction of Praeruptorin A from Radix peucedani

A series of novel tetramethylguanidinium ionic liquids and hexaalkylguanidinium ionic liquids have been synthesized based on 1,1,3,3‐tetramethylguanidine. The structures of the ionic liquids were confirmed by ¹H NMR spectroscopy and mass spectrometry. A green guanidinium ionic liquid based microwave‐assisted extraction method has been developed with these guanidinium ionic liquids for the effective extraction of Praeruptorin A from Radix peucedani. After extraction, reversed‐phase high‐performance liquid chromatography with UV detection was employed for the analysis of Praeruptorin A. Several significant operating parameters were systematically optimized by single‐factor and L₉ (3⁴) orthogonal array experiments. The amount of Praeruptorin A extracted by [1,1,3,3‐tetramethylguanidine]CH₂CH(OH)COOH is the highest, reaching 11.05 ± 0.13 mg/g. Guanidinium ionic liquid based microwave‐assisted extraction presents unique advantages in Praeruptorin A extraction compared with guanidinium ionic liquid based maceration extraction, guanidinium ionic liquid based heat reflux extraction and guanidinium ionic liquid based ultrasound‐assisted extraction. The precision, stability, and repeatability of the process were investigated. The mechanisms of guanidinium ionic liquid based microwave‐assisted extraction were researched by scanning electron microscopy and IR spectroscopy. All the results show that guanidinium ionic liquid based microwave‐assisted extraction has a huge potential in the extraction of bioactive compounds from complex samples.