Hydrophilic Nb-immobilized magnetic core–shell microsphere – A novel immobilized metal ion affinity chromatography material for highly selective enrichment of phosphopeptides

Rapid and selective enrichment of phosphopeptides from complex biological samples is essential and challenging in phosphorylated proteomics. In this work, for the first time, niobium ions were directly immobilized on the surface of polydopamine-coated magnetic microspheres through a facile and effective synthetic route. The Fe₃O₄@polydopamine-Nb⁵⁺ (denoted as Fe₃O₄@PD-Nb⁵⁺) microspheres possess merits of high hydrophilicity and good biological compatibility, and demonstrated low limit of detection (2 fmol). The selectivity was also basically satisfactory (β-casein:BSA = 1:500) to capture phosphopeptides. They were also successfully applied for enrichment of phosphopeptides from real biological samples such as human serum and nonfat milk. Compared with Fe₃O₄@PD-Ti⁴⁺ microspheres, the Fe₃O₄@PD-Nb⁵⁺ microspheres exhibit superior selectivity to multi-phosphorylated peptides, and thus may be complementary to the conventional IMAC materials.     

Enrichment and analysis of phosphopeptides under different experimental conditions using titanium dioxide affinity chromatography and mass spectrometry

Titanium dioxide metal oxide affinity chromatography (TiO₂‐MOAC) is widely regarded as being more selective than immobilized metal‐ion affinity chromatography (IMAC) for phosphopeptide enrichment. However, the widespread application of TiO₂‐MOAC to biological samples is hampered by conflicting reports as to which experimental conditions are optimal. We have evaluated the performance of TiO₂‐MOAC under a wide range of loading and elution conditions. Loading and stringent washing of peptides with strongly acidic solutions ensured highly selective enrichment for phosphopeptides, with minimal carryover of non‐phosphorylated peptides. Contrary to previous reports, the addition of glycolic acid to the loading solution was found to reduce specificity towards phosphopeptides. Base elution in ammonium hydroxide or ammonium phosphate provided optimal specificity and recovery of phosphorylated peptides. In contrast, elution with phosphoric acid gave incomplete recovery of phosphopeptides, whereas inclusion of 2,5‐dihydroxybenzoic acid in the eluant introduced a bias against the recovery of multiply phosphorylated peptides. TiO₂‐MOAC was also found to be intolerant of many reagents commonly used as phosphatase inhibitors during protein purification. However, TiO₂‐MOAC showed higher specificity than immobilized gallium (Ga³⁺), immobilized iron (Fe³⁺), or zirconium dioxide (ZrO₂) affinity chromatography for phosphopeptide enrichment. Matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) was more effective in detecting larger, multiply phosphorylated peptides than liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS), which was more efficient for smaller, singly phosphorylated peptides. Copyright © 2009 Crown in the right of Canada. Published by John Wiley & Sons, Ltd.     

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

Macrocyclic Polysiloxane Immobilized Ligand System and Its Structural Characterization

A new porous solid macrocyclic 1,4,7,10,14,17,20‐heptaazadocosane‐3,21‐dione polysiloxane ligand system of the general formula P‐(CH₂)₃‐C₁₅H₃₂O₂N₅, (where P represents [Si‐O]n siloxane network) has been prepared by the reaction of immobilized iminobis(N‐diethylenediamineacetamide)polysiloxane with 1,3 dibromopropane. The new macrocyclic polysiloxane ligand system exhibits high potential for the uptake of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺). Complexation with copper ions exhibits a high selectivity in which two copper ions were involved per one macrocyclic ligand group.     

The use of liquid phase deposition prepared phosphonate grafted silica nanoparticle‐deposited capillaries in the enrichment of phosphopeptides

In our current work, we describe how open tubular‐immobilized metal‐ion affinity chromatography (OT‐IMAC) capillary columns connected to a solid phase microextraction (in‐tube SPME) device can be used for the enrichment of phosphopeptides. A phosphonate modified silica nanoparticle (NP)‐deposited capillary was prepared by liquid phase deposition (LPD), and used for the immobilization of Fe³⁺, Zr⁴⁺ or Ti⁴⁺. The enrichment capacities of three different OT‐IMAC capillary columns were compared by using tryptically digested α‐casein as sample. The improved extraction efficiency in our technique was demonstrated by comparing to a directly modified capillary, and a comparison of phosphopeptide extraction from simple and complex samples was tested for both modes. Our results show that the NP‐IMAC‐Zr⁴⁺ capillary column can be used to selectively isolate phosphopeptides from real samples, and can enrich for β‐casein phosphopeptides from concentrations as low as 1.7×10^?9 M.     

A Novel Molecularly Imprinted Photoelectrochemical Sensor Based on g‐C3N4‐AuNPs for the Highly Sensitive and Selective Detection of Triclosan

A novel molecularly imprinted polymer (MIP) photoelectrochemical sensor was fabricated for the highly sensitive and selective detection of triclosan. The MIP photoelectrochemical sensor was fabricated using graphite‐like carbon nitride (g‐C₃N₄) and gold nanoparticles (AuNPs) as photoelectric materials. The MIP/g‐C₃N₄‐AuNPs sensor used photocurrent as the detection signal and was triggered by ultraviolet light (UV‐Light 365 nm). g‐C₃N₄‐AuNPs was immobilized on indium tin oxide electrodes to produce the photoelectrochemically responsive electrode of the MIP/g‐C₃N₄‐AuNPs sensor. A MIP layer of poly‐o‐phenylenediamine was electropolymerized on the g‐C₃N₄‐AuNPs‐modified electrode to act as the recognition element of the MIP/g‐C₃N₄‐AuNPs sensor and to enable the selective adsorption of triclosan to the sensor through specific binding. Under optimal experimental conditions, the designed MIP/g‐C₃N₄‐AuNPs sensor presented high sensitivity for triclosan with a linear range of 2×10⁻¹² to 8×10⁻¹⁰ M and a limit of detection of 6.01×10⁻¹³ M. Moreover, the MIP/g‐C₃N₄‐AuNPs sensor showed excellent selectivity. The sensor had been successfully applied in the analysis of toothpaste samples.     

Step‐Growth Coordination Polymerization of 5‐Hydroxymethyl Furfural with Dihydrosilanes: Synergistic Catalysis Using Heteroscopionate Zinc Hydride and B(C6F5)3

The utilization of 5‐hydroxymethyl furfural (HMF) as a renewable feedstock for polymer synthesis has not yet been achieved as it is structurally asymmetric and contains three active functional groups. Reported here is the unprecedented step‐growth copolymerization of HMF and dihydrosilanes, through a coordination mechanism, to afford linear poly(silyl ether)s in the presence of B(C₆F₅)₃ and the heteroscorpionate zinc hydride complex LZnH [L=(^MePz)₂CP(Ph)₂NPh, ^MePz=3,5‐dimethylpyrazolyl]. The adduct B(C₆F₅)₃???H???Zn, confirmed by NMR spectroscopy and DFT calculations, plays a key role in the synergistic catalysis, where B(C₆F₅)₃ activates ZnH and stabilizes the Zn⁺ active species, and the sterically bulky ZnH effectively inhibits (C₆F₅)₃B from reacting with dihydrosilane to form (C₆F₅)₃B‐H‐Si, which facilely initiates ring opening of furan. The mechanism was studied by DFT simulations.     

Transition‐Metal‐Mediated Cleavage of Fluoro‐Silanes under Mild Conditions

Si?F bond cleavage of fluoro‐silanes was achieved by transition‐metal complexes under mild and neutral conditions. The Iridium‐hydride complex [Ir(H)(CO)(PPh₃)₃] was found to readily break the Si?F bond of the diphosphine‐ difluorosilane {(o‐Ph₂P)C₆H₄}₂Si(F)₂ to afford a silyl complex [{[o‐(iPh₂P)C₆H₄]₂(F)Si}Ir(CO)(PPh₃)] and HF. Density functional theory calculations disclose a reaction mechanism in which a hypervalent silicon species with a dative Ir→Si interaction plays a crucial role. The Ir→Si interaction changes the character of the H on the Ir from hydridic to protic, and makes the F on Si more anionic, leading to the formation of H^δ+???F^δ? interaction. Then the Si?F and Ir?H bonds are readily broken to afford the silyl complex and HF through σ‐bond metathesis. Furthermore, the analogous rhodium complex [Rh(H)(CO)(PPh₃)₃] was found to promote the cleavage of the Si?F bond of the triphosphine‐monofluorosilane {(o‐Ph₂P)C₆H₄}₃Si(F) even at ambient temperature.     

Preparation of monodisperse immobilized Ti affinity chromatography microspheres for specific enrichment of phosphopeptides

This study presented an approach to prepare monodisperse immobilized Ti⁴⁺ affinity chromatography (Ti⁴⁺-IMAC) microspheres for specific enrichment of phosphopeptides in phosphoproteome analysis. Monodisperse polystyrene seed microspheres with a diameter of ca. 4.8 μm were first prepared by a dispersion polymerization method. Monodisperse microspheres with a diameter of ca. 13 μm were prepared using the seed microspheres by a single-step swelling and polymerization method. Ti⁴⁺ ion was immobilized after chemical modification of the microspheres with phosphonate groups. The specificity of the Ti⁴⁺-IMAC microspheres to phosphopeptides was demonstrated by selective enrichment of phosphopeptides from mixture of tryptic digests of α-casein and bovine serum albumin (BSA) at molar ratio of 1 to 500 by MALDI-TOF MS analysis. The sensitivity of detection for phosphopeptides determined by MALDI-TOF MS was as low as 5 fmol for standard tryptic digest of β-casein. The Ti⁴⁺-IMAC microspheres were compared with commercial Fe³⁺-IMAC adsorbent and homemade Zr⁴⁺-IMAC microspheres for enrichment of phosphopeptides. The phosphopeptides and non-phosphopeptides identified by Fe³⁺-IMAC, Zr⁴⁺-IMAC and Ti⁴⁺-IMAC methods were 26, 114, 127 and 181, 11, 11 respectively for the same tryptic digest samples. The results indicated that the Ti⁴⁺-IMAC had the best performance for enrichment of phosphopeptides.     

Electrochemiluminescence of Supramolecular Nanorods and Their Application in the “On–Off–On” Detection of Copper Ions

In this work, an “on–off–on” switch system has been successfully applied through the construction of an electrochemiluminscent biosensor for copper ion (Cu²⁺) detection based on a new electrochemiluminescence (ECL) emitter of supramolecular nanorods, which was achieved through supramolecular interactions between 3,4,9,10‐perylenetetracarboxylic acid (PTCA) and aniline. The initial “signal‐on” state with strong and stable ECL emission was obtained by use of the supramolecular nanorods with a new signal amplification strategy involving a co‐reaction accelerator. In addition, ECL quencher probes (Fc‐NH₂/Cu‐Sub/nano‐Au) were fabricated by immobilizing aminoferrocene (Fc‐NH₂) on Cu‐substrate strand modified Au nanoparticles. The quencher probes were hybridized with the immobilized Cu‐enzyme strand to form Cu²⁺‐specific DNAzyme. Similarly, the “signal‐off” state was obtained by the high quenching effect of Fc‐NH₂ on the ECL of the excited‐state PTCA (¹PTCA*). As expected, the second “switch‐on” state could achieved by incubating with the target Cu²⁺, owing to the Cu²⁺‐specific DNAzyme, which was irreversibly cleaved, resulting in the release of the quencher probes from the sensor interface. Herein, on the basis of the ECL intensity changes (ΔI_ECL) before and after incubating with the target Cu²⁺, the prepared Cu²⁺‐specific DNAzyme‐based biosensor was used for the determination of Cu²⁺ concentrations with high sensitivity, excellent selectivity, and good regeneration.     

Lanthanide versus Actinide Reactivity in the Formation of Sterically Crowded [(C5Me5)3MLn] Nitrile and Isocyanide Complexes

The limits of steric crowding in organometallic metallocene complexes have been examined by studying the synthesis of [(C₅Me₅)₃ML_n] complexes as a function of metal in which L=Me₃CCN, Me₃CNC, and Me₃SiCN. The bis(tert‐butyl nitrile) complexes [(C₅Me₅)₃Ln(NCCMe₃)₂] (Ln=La, 1 ; Ce, 2 ; Pr, 3 ) can be isolated with the largest lanthanide metal ions, La³⁺, Ce³⁺, and Pr³⁺. The Pr³⁺ ion also forms an isolable mono‐nitrile complex, [(C₅Me₅)₃Pr(NCCMe₃)] ( 4 ), whereas for Nd³⁺ only the mono‐adduct [(C₅Me₅)₃Nd(NCCMe₃)] ( 5 ) was observed. With smaller metal ions, Sm³⁺ and Y³⁺, insertion of Me₃CCN into the M? C(C₅Me₅) bond was observed to form the cyclopentadiene‐substituted ketimide complexes [(C₅Me₅)₂Ln{NC(C₅Me₅)(CMe₃)}(NCCMe₃)] (Ln=Sm, 6 ; Y, 7 ). With tert‐butyl isocyanide ligands, a bis‐isocyanide product can be isolated with lanthanum, [(C₅Me₅)₃La(CNCMe₃)₂] ( 8 ), and a mono‐isocyanide product with neodymium, [(C₅Me₅)₃Nd(CNCMe₃)] ( 9 ). Silicon–carbon bond cleavage was observed in reactions between [(C₅Me₅)₃Ln] complexes and trimethylsilyl cyanide, Me₃SiCN, to produce the trimeric cyanide complexes [{(C₅Me₅)₂Ln(μ‐CN)(NCSiMe₃)}₃] (Ln=La, 10 ; Pr, 11 ). With uranium, a mono‐nitrile reaction product, [(C₅Me₅)₃U(NCCMe₃)] ( 12 ), which is analogous to 5 , was obtained from the reaction between [(C₅Me₅)₃U] and Me₃CCN, but [(C₅Me₅)₃U] reacts with Me₃CNC through C? N bond cleavage to form a trimeric cyanide complex, [{(C₅Me₅)₂U(μ‐CN)(CNCMe₃)}₃] ( 13 ).     

A Ruthenium Complex–Porphyrin–Fullerene‐Linked Molecular Pentad as an Integrative Photosynthetic Model

A ruthenium complex, porphyrin sensitizer, fullerene acceptor molecular pentad has been synthesized and a long‐lived hole–electron pair was achieved in aqueous solution by photoinduced multistep electron transfer: Upon irradiation by visible light, the excited‐state of a zinc porphyrin (¹ZnP*) was quenched by fullerene (C₆₀) to afford a radical ion pair, ^1,3(ZnP^.+‐C₆₀^.−). This was followed by the subsequent electron transfer from a water oxidation catalyst unit (Ru^II) to ZnP^.+ to give the long‐lived charge‐separated state, Ru^III‐ZnP‐C₆₀^.−, with a lifetime of 14 μs. The ZnP worked as a visible‐light‐harvesting antenna, while the C₆₀ acted as an excellent electron acceptor. As a consequence, visible‐light‐driven water oxidation by this integrated photosynthetic model compound was achieved in the presence of sacrificial oxidant and redox mediator.     

UV‐Visible and Electrochemical Monitoring of Carbon Monoxide Release by Donor Complexes to Myoglobin Solutions and to Electrodes Modified with Films Containing Hemin

This study reports on the evaluation of the CO donating behavior of tricarbonyl dichloro ruthenium(II) dimer ([Ru(CO)₃Cl₂]₂) and 1,3‐dimethoxyphenyl tricarbonyl chromium (C₆H₃(MeO)₂Cr(CO)₃) complex by UV‐visible technique and electrochemical technique. The CO release was monitored by following the modifications of the UV‐visible features of MbFe(II) in phosphate buffer solution and the redox features of reduced Hemin, HmFe(II), confined at the surface of a vitreous carbon electrode. In the latter case, the interaction between the hemin‐modified electrode and the released CO was seen through the observation of an increase of the reduction current related to the Fe^III/Fe^II redox process of the immobilized porphyrin. While the ruthenium‐based complex, ([Ru(CO)₃Cl₂]₂), depended on the presence of Fe(II) species to release CO, it was found that the chromium‐based complex released spontaneously CO. This was facilitated by illuminating and/or simple stirring of the solution containing the complex.     

Ruthenium(II)−Bipyridine/NanoC3N4 Hybrids: Tunable Photochemical Properties by Using Exchangeable Alkali Metal Cations

A series of nanoporous carbon nitrides that contained a range of alkali metal cations (M@nanoC₃N₄: M=Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺) have been successfully synthesized from as‐synthesized g‐C₃N₄ by delamination with concentrated sulfuric acid, followed by neutralization with aqueous solutions of the corresponding alkali metal hydroxides. Tris(2,2′‐bipyridine)ruthenium(II) complexes, [Ru(bpy)₃]²⁺, were grafted onto the carbon nitrides in an effort to explore the physicochemical properties of the deposited [Ru(bpy)₃]²⁺, as well as its photocatalytic activity in the aerobic photooxidation of phenylboronic acid and H₂ production from aqueous media in the presence of a Pt co‐catalyst under visible‐light irradiation. Highly porous nanoC₃N₄ could significantly enhance photocatalytic activity, because of its high surface area, owing to its unique porous structure. More interestingly, the photoluminescence intensities of [Ru(bpy)₃]²⁺ complexes that were associated with M@nanoC₃N₄ increased in the presence of lighter alkali metal cations, which correlated with increased photocatalytic activities for both reactions. This study demonstrates that M@nanoC₃N₄ are fascinating supports, in which the local environment of an immobilized metal complex can be precisely controlled by varying the alkali metal cation from Li⁺ to Cs⁺.     

Functionalized diamond nanopowder for phosphopeptides enrichment from complex biological fluids

Diamond is known for its high affinity and biocompatibility towards biomolecules and is used exclusively in separation sciences and life science research. In present study, diamond nanopowder is derivatized as Immobilized Metal Ion Affinity Chromatographic (IMAC) material for the phosphopeptides enrichment and as Reversed Phase (C-18) media for the desalting of complex mixtures and human serum profiling through MALDI-TOF-MS. Functionalized diamond nanopowder is characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy. Diamond-IMAC is applied to the standard protein (β-casein), spiked human serum, egg yolk and non-fat milk for the phosphopeptides enrichment. Results show the selectivity of synthesized IMAC-diamond immobilized with Fe³⁺ and La³⁺ ions. To comprehend the elaborated use, diamond-IMAC is also applied to the serum samples from gall bladder carcinoma for the potential biomarkers. Database search is carried out by the Mascot program (www.matrixscience.com) for the assignment of phosphorylation sites. Diamond nanopowder is thus a separation media with multifunctional use and can be applied to cancer protein profiling for the diagnosis and biomarker identification.     

Fabrication of Immunosensor Based on Polyaniline,Fullerene‐C60 and Palladium Nanoparticles Nanocomposite: An Electrochemical Detection Tool for Prostate Cancer

Present work demonstrates the fabrication of new and facile sandwich‐type electrochemical immunosensor based on palladium nanoparticles (PdNPs), polyaniline (PANI) and fullerene‐C₆₀ nanocomposite film modified glassy carbon electrode (PdNP@PANI‐C₆₀/GCE) for ultrasensitive detection of Prostate‐specific antigen (PSA) biomarker. PdNP@PANI‐C₆₀ was electrochemically synthesized on GCE and used as an electroactive substrate. PdNP@PANI‐C₆₀ was characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Primary antibody anti‐PSA (Ab1) was covalently immobilized on PdNP@PANI‐C₆₀/GCE using NHS/EDC linkers. In the presence of PSA antigen, horseradish peroxidase secondary antibody (HRP‐Ab2) was brought into the surface of the electrode, developing stable amplified signals of H₂O₂ reduction. Under the optimal conditions, a linear curve for determination of PSA at the proposed immunosensor was 1.6×10^?4 ng.mL^?1 to 38 ng.mL^?1 with a limit of detection (LOD) of 1.95×10^?5 ng.mL^?1. The proposed immunosensor was successfully validated in serum and urine samples towards PSA detection with satisfactory and acceptable results.     

C3H2环丙烯基自由基与O(3P)反应机理的理论研究

本文用量子化学密度泛函方法对C3H2 (环丙烯基自由基)与O(3P)反应的机理进行了理论研究。在B3LYP/6-311++G**计算水平上优化了各驻点（过渡态,中间体,产物）的几何结构,在QCISD(T)/6-311++G**水平下计算了各物质的单点能量,在两种水平下计算了298K和600K时的能量。计算结果表明：C3H2 + O(3P) 反应可以生成P1 (C2H +HCO),P2 (C2H2 + CO) 和P3 (HC3O+H)三种产物。生成P1反应通道的能垒最低,即P1为主要产物,与实验的结果一致。产物P1可以通过路径：R→ IM1→ IM2→ P1获得。本文详细地讨论了C3H2 + O(3P) 的反应机理,并从理论上对实验结果进行了验证。研究结果有助于深入理解C3H2 + O(3P)反应机理以及C3H2在大气中的燃烧过程。     

Immobilized copper catalyst for atom transfer radical addition and polymerization

A novel multidentate amine grafted on silica gel and magnetic microsphere was prepared. Its chemical structure was confirmed by C¹³ NMR, XPS and FTIR, and the nitrogen content was determined by elemental analysis. It was also used as a ligand for CuCl and successfully catalyzed the atom transfer radical addition of both carbon tetrachloride (CCl₄) to methyl methacrylate and methyl trichloroacetate to styrene, repeatedly. The conversion and purity of the product were determined through gas chromatography and ¹H NMR, respectively. The immobilized copper catalyst complex was also used in atom transfer radical polymerization of styrene initiated by 1,1,1,3‐tetrachloro‐3‐phenylpropane and methyl methacrylate initiated by methyl 2‐methyl‐2,4,4,4‐tetrachlorobutyrate, respectively. Although the polymerization took place successfully, it did not proceed in a controlled fashion. Copyright © 2010 John Wiley & Sons, Ltd.     

An Antimony(V) Dication as a Z‐Type Ligand: Turning on Styrene Activation at Gold

With the intent to demonstrate that the charge of Z‐type ligands can be used to modulate the electrophilic character and catalytic properties of coordinated transition metals, we are now targeting complexes bearing polycationic antimony‐based Z‐type ligands. Toward this end, the dangling phosphine arm of ((o‐(Ph₂P)C₆H₄)₃)SbCl₂AuCl ( 1 ) was oxidized with hydrogen peroxide to afford [((o‐(Ph₂P)C₆H₄)₂(o‐Ph₂PO)C₆H₄)SbAuCl₂]⁺ ([ 2 a ]⁺) which was readily converted into the dicationic complex [((o‐(Ph₂P)C₆H₄)₂(o‐Ph₂PO)C₆H₄)SbAuCl]²⁺ ([ 3 ]²⁺) by treatment with 2 equiv AgNTf₂. Both experimental and computational results show that [ 3 ]²⁺ possess a strong Au→Sb interaction reinforced by the dicationic character of the antimony center. The gold‐bound chloride anion of [ 3 ]²⁺ is rather inert and necessitates the addition of excess AgNTf₂ to undergo activation. The activated complex, referred to as [ 4 ]²⁺ [((o‐(Ph₂P)C₆H₄)₂(o‐Ph₂PO)C₆H₄)SbAuNTf₂]²⁺ readily catalyzes both the polymerization and the hydroamination of styrene. This atypical reactivity underscores the strong σ‐accepting properties of the dicationic antimony ligand and its activating impact on the gold center.     

Carboxymethylated polyethylenimine modified magnetic nanoparticles specifically for purification of His‐tagged protein

Employing immobilized metal‐ion affinity chromatography and magnetic separation could ideally provide a useful analytical strategy for purifying His‐tagged protein. In the current study, a facile route was designed to prepare CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ (CMPEI=carboxymethylated polyethyleneimine) magnetic nanoparticles composed of a strong magnetic core of Fe₃O₄ and a Ni²⁺‐immobilized carboxymethylated polyethyleneimine coated outside shell, which was formed by electrostatic interactions between polyanionic electrolyte of carboxymethylated polyethyleneimine and positively charged surface of 3‐(trimethoxysilyl)propylamin modified SiO₂@Fe₃O₄. The resulting CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ composite nanoparticles displayed well‐uniform structure and high magnetic responsiveness. Hexa His‐tagged peptides and purified His‐tagged recombinant retinoid X receptor alpha were chosen as the model samples to evaluate the adsorption, capacity, and reusability of the composite nanoparticles. The results demonstrated the CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ nanoparticles possessed rapid adsorption, large capacity, and good recyclability. The obtained nanoparticles were further used to purify His‐tagged protein in practical environment. It was found that the nanoparticles could selectively capture His‐tagged recombinant retinoid X receptor protein from complex cell lysate. Owing to its easy synthesis, large binding capacity, and good reusability, the prepared CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ magnetic nanoparticles have great potential for application in biotechnological fields.