A novel three-dimensional malonate-bridged complex {[Cu4(4,4′- bpy)8(mal)2(H2O)4](ClO4)2(H2O)4(CH3OH)2}n

A novel malonate-bridged copper (II) compound of formula {[Cu₄(4,4′-bpy)₈(mal)₂(H₂O)₄](ClO₄)₂(H₂O)₄(CH₃OH)₂}_n (4,4′-bpy = 4,4′-bipyridine; mal = malonate dianion) has been prepared and structurally characterized by X-ray crystallography. This compound exhibits a novel three-dimensional network being composed of Cu-4,4′-bipyridine layers which are pillared by malonate bridge ligands. The copper(II) ions has two different coordination environment.     

Preparation and configurational isomerism of ditertiary stibine sulfides, (C6H5)(CH3)(S)SbCH2Sb(CH3)(C6H5) and [(C6H5)(CH3)(S)Sb]2(CH2)3

Asymmetric ditertiary stibine sulfides (C₆H₅)(CH₃)(S)SbCH₂Sb(CH₃)(C₆H₅) and [(C₆H₅)(CH₃)(S)Sb]₂(CH₂)₃ have been prepared. It was found that they exist as only one of two possible diastereomers in the crystalline state. However, isomerization to the other form takes place in solution, resulting in an equilibrium mixture. A possibility of configurational lability of tertiary stibine sulfide was suggested for the first time.     

Syntheses and structural studies on two cycloruthenapentadienyl complexes: [(CO)3RuC4(CH2OH)4]Ru(CO)3·H2O and [(CO)3RuC4(CH2CH2OH)2(C2H5)2]Ru(CO)3

Syntheses and single-crystal X-ray diffraction studies have been completed on two cycloruthenapentadienyl (CO)₆Ru₂L₂ derivatives, with L = CH₂OHC = CCH₂OH and C₂H₅C=CCH₂CH₂OH respectively. Crystal data are as follows: for [(CO)₃RuC₄(CH₂OH)₄]Ru(CO)₃·H₂O, P2₁/c, a 13.72(1), b 9.501(4), c 14.86(1) Å, β 101.10(6)°, R_w = 0.052 for 1911 reflections; for [(CO)₃RuC₄(CH₂CH₂OH)₂(C₂H₅)₂]Ru(CO)₃, P2₁/c, a 9.191(3), b 16.732(4), c 14.903(3) Å, β 113.61(4)°, R_w = 0.042 for 2865 reflections. Both compounds are built up from binuclear units, each unit being regarded as a Ru(CO)₃ fragment π-bonded to a cycloruthenapentadienyl ring. The molecular parameters are compared with those of known cyclometallapentadienyl complexes of transition metals. The presence of a semi-bridging CO group is discussed.     

Reactions of Ru3(CO)12 with Ene-yne and Alkoxy-silyl Functionalized Compounds. The Crystal Structure of (μ-H)Ru3(CO)9[μ3-η2-HC=N(CH2)3Si(OEt)3]

Ru₃(CO)₁₂ has been reacted with the compounds hex-1-en-3-yne [EtC≡CCH=CH₂], 2-methyl-hex-1-en-3-yne [EtC≡CC(=CH₂)CH₃] and with 3(ethoxy-silyl)propyl isocyanate [(EtO)₃Si(CH₂)₃NCO] and the compound tb [(EtO)₃Si(CH₂)₃NHC(=O)OCH₂C≡CCH₂OC(=O)NH(CH₂)₃Si(OEt)₃] in hydrocarbon solution. Some reactions in CH₃OH/KOH solution (followed by acidification) have also been performed. The main products of the reactions with ene-ynes are the clusters Ru₃(CO)₆(μ-CO)₂L₂ (L = C₆H₈, C₇H₁₀) and their demolition products, the “ferrole” Ru₂(CO)₆L₂ complexes. One of the isomers of Ru₃(CO)₆(μ-CO)₂L₂, and Ru₂(CO)₆L₂ (L = C₇H₁₀) have been reacted with vinyl-triethoxysilane [(EtO)₃SiCH=CH₂]: these reactions did not afford complexes containing new carbon–carbon bonds or triethoxy-silyl groups. Only polymerization of vinyl-triethoxysilane occurred. The reactions of Ru₃(CO)₁₂ with triethoxysilyl-propyl-isocyanate and tb (in the presence of Me₃NO) lead to the same products, that is the isomeric complexes (μ-H)Ru₃(CO)₉[C=N(H)(CH₂)₃Si(OEt)₃] with a “perpendicular” ligand (complex 3, as proposed on the basis of spectroscopic results) and (μ-H)Ru₃(CO)₉[HC=N(CH₂)₃Si(OEt)₃] with a “parallel” ligand (complex 4, as confirmed by a X-ray analysis). The reaction pathways leading to these products are discussed. Complex 4 has been reacted with tetraethyl orthosilicate and the resulting material has been characterized. These reactions are part of a study on the synthesis of inorganic-organometallic materials through sol–gel techniques. This paper is dedicated to Prof. Gunther Schmid in the occasion of his 70th birthday.     

New deoxygenative transformations; reactions of (CO)4Fe[Si(CH3)3]2 with acyclic ethers

The reaction of cis-(CO)₄Fe[Si(CH₃)₃]₂ (I) with CH₃OSi(CH₃)₃ and C₆H₅CH₂-OSi(CH₃)₃ at 80°C affords good yields of [(CH₃)₃Si]₂O and the deoxygenation products RSi(CH₃)₃ (R = CH₃, C₆H₅CH₂). These reactions are proposed to occur via (CO)₄Fe(R)Si(CH₃)₃ intermediates. This is supported by the observed formation of cis-(CO)₄Fe(CH₃)Si(CH₃)₃ (II) during the more rapid reaction of I with (CH₃)₂O; subsequent (CH₃)₄Si elimination occurs. With (C₆H₅CH₂)₂O, I reacts at 80°C to yield C₆H₅CH₂Si(CH₃)₃ and C₆H₅CH₂OSi(CH₃)₃ as primary products. With C₆H₅CH₂OCH₃, I effects regioselective benzyl---oxygen bond cleavage.     

Threshold energies for production of CH2(3B1) and CH2(1A1) from ketene photolysis. The CH2(3B1) ↔ CH2(1A1) energy splitting

By measuring the relative CO quantum yields from ketene photolysis as a function of photolysis wavelength we have determined the threshold energy at 25° for CH₂CO(¹A₁) → CH₂(³B₁) + CO(¹Σ⁺) to be 75.7 ± 1.0 kcal/mole. This corresponds to a value of 90.7 ± 1.0 kcal/mole for ΔH_f298⁰[CH₂(³B₁)]. By measuring the relative ratio of CH₂(¹A₁)/CH₂(³B₁) from ketene photolysis as a function of photolysis wavelength we have determined the threshold energy at 25°C for CH₂CO(¹A₁) → CH₂(¹A₁) + CO(¹Σ⁺) to be 84.0 ± 0.6 kcal/mole. This corresponds to a value of 99.0 ± 0.6 kcal/mole for ΔH_f298⁰[CH₂(¹A₁)]. Thus a value for the CH₂(³B₁) ? CH₂(¹A₁) energy splitting of 8.3 ± 1 kcal/mole is determined, which agrees with three other recent independent experimental estimates and the most recent quantum theoretical calculations.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Synthesis and crystal structure of KNa3[Fe3O(CH3COO)6(H2O)2]3 [α-P2W17Fe(H2O)O61]·32.5H2O

A complex of the composition KNa₃[Fe₃O(CH₃COO)₆(H₂O)₃]₃ [α-P₂W₁₇Fe(H₂O)O₆₁]·32.5H₂O (I) was obtained by interaction of FeCl₃·6H₂O and phosphotungstate K₁₀[α₂-P₂W₁₇O₆₁]·20H₂O in an acetate buffer with a yield of 52%. Compound I was characterized by single crystal X-ray phase analysis and IR spectroscopy. In the crystal structure, the Na and K cations bind [Fe₃O(CH₃COO)₆(H₂O)₃]⁺ trinuclear cations and [α-P₂W₁₇Fe(H₂O)O₆₁]⁷⁻ heteropolytungstate anions into infinite zigzag chains. Original Russian Text Copyright ? 2005 by N. V. Izarova, M. N. Sokolov, A. V. Virovets, H. G. Platas, and V. P. Fedin __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 46, No. 1, pp. 149–155, January–February, 2005.     

Synthesis, structure, and characterization of hybrid materials: [Ce(H2O)]2[O2C(CH2)2CO2]3 and [Sm(H2O)]2[O2C(CH2)2CO2]3·H2O

The rare-earth dicarboxylate hybrid materials [Ce(H₂O)]₂[O₂C(CH₂)₂CO₂]₃ ([Ce(Suc)]) and [Sm(H₂O)]₂[O₂C(CH₂)₂CO₂]₃·H₂O ([Sm(Suc)]) have been hydrothermally synthesized (200°C, 3 days) under autogenus pressure. [Ce(Suc)] is triclinic, a=7.961 (3) Å, b=8.176 (5) Å, c=14.32 (2) Å, α=97.07° (7), β=96.75° (8), γ=103.73° (6), and z=2. The crystal structure of this compound has been determined using 3120 unique single crystal data. The final refinements let the agreement factors R₁ and wR₂(F²) converge to 0.0138 and 0.0363, respectively. [Ce(Suc)] is built up from infinite chains of edge-sharing nine-fold coordinated cerium atoms running along [100]. These chains are interconnected by the carbon atoms of the succinate anions, leading to a three-dimensional hybrid framework. The cell constants of [Sm(Suc)], isotypic with monoclinic C2/c [Pr(H₂O)]₂[O₂C(CH₂)₂CO₂]₃·H₂O ([Pr(Suc)]), were refined starting from X-ray powder data: a=20.275 (3) Å, b=7.919 (6) Å, c=14.130 (3) Å, and β=121.45° (1). Despite its lower symmetry, [Ce(Suc)] presents an important structural filiation with [Sm(Suc)]     

Preparation and properties of (η-C5H5)2ZrCl[Si(CH3)3] and (η-C5H5)2Zr[Si(CH3)3]2; trimethylsilyl group transfer from mercury to zirconium

Two silyl-zirconium compounds (η-C₅H₅)₂ZrCl[Si(CH₃)₃] (I) and (η-C₅H₅)₂-Zr[Si(CH₃)₃]₂ (II), have been prepared by the reaction of (η-C₅H₅)₂ZrCl₂ with Hg[Si(CH₃)₃]₂ in refluxing benzene. While I is unreactive toward 1-hexyne (55–60°C) and CO (350 psi), the zirconiumsilicon bond is cleaved by electrophiles such as Cl₂, HgCl₂, and AlCl₃.     

1-Heptyne semihydrogenation catalysed by [PdCl2(NH2(CH2)5CH3)2]

The [PdCl₂(NH₂(CH₂)₅CH₃)₂] complex was tested as catalyst for 1-heptyne semihydrogenation under mild conditions of temperature and pressure in homogeneous and heterogeneous systems. Species were characterized by XPS and FTIR techniques. This revised version was published online in June 2006 with corrections to the Cover Date.     

Spectroscopic study of the trinuclear complex salt [Cr3O(CH3COO)6(H2O)3]Cl†6H2O

The presence of two sets of inequivalent trimeric clusters in [Cr₃O(CH₃COO)₆(H₂O)₃]Cl†6H₂O at low temperature has been confirmed by luminescence and luminescence excitation spectroscopy. Assignments of the four lowest level of the lowest electronically excited state have been made. The ground state parameters have been determined.     

Binuclear ruthenium complexes of fluorous phosphine ligands: Synthesis, properties, and biphasic catalytic activity. Crystal structure of [Ru(μ-O2CMe)(CO)2P(CH2CH2(CF2)5CF3)3]2

The fluorocarbon soluble, binuclear ruthenium(I) complexes [Ru(μ-O₂CMe)(CO)₂L^F]₂, where L^F is the perfluoroalkyl substituted tertiary phosphine, P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃, or P(CH₂CH₂(CF₂)₅CF₃)₃, were synthesized and partition coefficients for the complexes in fluorocarbon/hydrocarbon biphases were determined. Catalytic hydrogenation of acetophenone to 1-phenylethanol in benzotrifluoride at 105 °C occured in the presence of either [Ru(μ-O₂CMe)(CO)₂P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃]₂ (1) or [Ru(μ-O₂CMe)(CO)₂P(CH₂CH₂(CF₂)₅CF₃)₃]₂ (2). The X-ray crystal structure of [Ru(μ-O₂CMe)(CO)₂P(CH₂CH₂(CF₂)₅CF₃)₃]₂ was determined. The compound exhibited discrete regions of fluorous and non-fluorous packing.     

Platinumolefin bond strength in Pt(PPh3)2(CH2CH2) and Pt(PPh3)2 {C(CN)2C(CN)2}

The enthalpy of the reaction: Pt(PPh₃)₂ (CH₂CH₂)(cryst.) + C(CN)₂C(CN)₂ (g) → Pt(PPh₃)₂ {C(CN)₂C(CN)₂}(cryst.) + CH₂ CH₂ (g) has been determined as ΔH₂₉₈=?155.8±8.0 kJ·mol^?1, from solution calorimetry. The interpretation, that the platinumethylene bond is much weaker than the platinumtetracyanoethylene bond, is contrary to conclusions drawn recently from electron emission spectroscopic studies, but in agreement with available structural data.     

Synthesis and X-ray diffraction study of R[UO2(CH3COO)3] (R = H3O+ or NH(C2H5) 3+ )

Single crystals of (H₃O)[UO₂(CH₃COO)₃] (I) and (NH(C₂H₅)₃)[UO₂(CH₃COO)₃] (II) are synthesized, and their structures are studied by X-ray crystallography. Compound I crystallizes in the tetragonal crystal system with the unit cell parameters a = 13.70640(10) ?, c = 27.5258(5) ?, V = 5171.14(11) ?³, space group I4₁/a, Z = 16, R = 0.0238. The crystals of compound II are orthorhombic with the parameters a = 13.3685(3) ?, b = 10.6990(3) ?, c = 12.2616(3) ?, V = 1753.77(8) ?³, space group Pna2₁, Z = 4, R = 0.0228. The uranium-containing structural units of crystals I and II are [UO₂(CH₃COO)₃]⁻ island mononuclear groups belonging to the A B₃⁰¹(A = UO₂²⁺, B⁰¹ = CH₃COO⁻) crystal-chemical group of uranyl complexes. [UO₂(CH₃COO)₃]⁻ complexes are linked into a three-dimensional framework by electrostatic interactions with the outer-sphere cations and by hydrogen bonds involving the hydrogen atoms of hydroxonium (I) or triethylammonium (II) with the oxygen atoms of the acetato groups.     

1,2-Eliminations from (CH3)2NH+CH2CH3 and (CH3)2NH 2+ : Guided dissociations

1,2-Eliminations are a varied and extensive set of dissociations of ions in the gas phase. To understand better such dissociations, elimination of CH₂=CH₂ and CH₃CH₃ from (CH₃)₂NH⁺CH₂CH₃ (1) and of CH₄ from (CH₃)₂NH₂⁺ are characterized by quantum chemical calculations. Stretching of the CN bond to ethyl is followed by shift of an H from methyl to the bridging position in ethyl and then to N to reach (CH₃)₂NH₂⁺ + CH₂=CH₂ from 1. CH₃CH₃ elimination by H-transfer to C₂H₅⁺ to form CH₃NH⁺=CH₂ + CH₃CH₃ also takes place. (CH₃)₂NH₂⁺ eliminates methane by CN bond extension followed by β-H-transfer to give CH₂=NH⁺ + CH₄. Low-energy reactions resembling complex-mediated 1,2-eliminations occur and constitute a hitherto largely unrecognized type of reaction. As in many complex-mediated reactions, these reactions transfer H between incipient fragments. They are distinguished from complex-mediated processes by the fragments not being able to rotate freely relative to each other near the transition state for reaction, as they do in complexes. Most 1,2-eliminations are ion-neutral complex-mediated, occur by the just described lower energy reactions, have 1,1-like transition states, or utilize highly asynchronous 1,2 transition states. All of these avoid synchronized 1,2-transition states that would violate conservation of orbital symmetry.     

Actinide-centered cyclometalation chemistry. An unusually distorted thorium bishydrocarbyl: Thp[η5-(CH3)5C5]2CH2Si(CH3)3]2

The crystal and molecular structure of the complex Th[η⁵-(CH₃)₅C₅]₂[CH₂-Si(CH₃)₃]₂, which undergoes facile intramolecular cyclometalation to the thoracyclobutane Th[η⁵-(CH₃)₅C₅]₂(CH₂)₂Si(CH₃)₂, is reported. While the Th[η⁵-(CH₃)₅C₅]₂ ligation is unexceptional, the Th[CH₂Si(CH₃)₃]₂ fragment is highly unsymmetrical having Th-C (corresponding angle Th-C-Si) 2.51(1) Å (132.0(6)°) and 2.46(1) Å (148.0(7)°). This conformation, which appears to result from severe intramolecular non-bonded contacts, allows a methyl hydrogen atom of one CH₂Si(CH₃)₃ ligand to approach within ca. 2.3 Å of the α-carbon atom of the other CH₂Si(CH₃)₃ ligand.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

The enthalpies of formation of CH3Mn(CO)5 and of CH3Re(CO)5, and the strengths of the CH3Mn and CH3Re bonds

From measurements of the heats of iodination of CH₃Mn(CO)₅ and CH₃Re(CO)₅ at elevated temperatures using the ‘drop’ microcalorimeter method, values were determined for the standard enthalpies of formation at 25° of the crystalline compounds: ΔH^o_f[CH₃Mn(CO)₅, c] = ?189.0 ± 2 kcal mol^?1 (?790.8 ± 8 kJ mol^?1), ΔH^o_f[Ch₃Re(CO)₅,c] = ?198.0 ± kcal mol^?1 (?828.4 ± 8 kJ mo^?1). In conjunction with available enthalpies of sublimation, and with literature values for the dissociation energies of MnMn and ReRe bonds in Mn₂(CO)₁₀ and Re₂(CO)₁₀, values are derived for the dissociation energies: D(CH₃Mn(CO)₅) = 27.9 ± 2.3 or 30.9 ± 2.3 kcal mol^?1 and D(CH₃Re(CO)₅) = 53.2 ± 2.5 kcal mol^?1. In general, irrespective of the value accepted for D(MM) in M₂(CO)₁₀, the present results require that, D(CH₃Mn) = $\text{1}\text{2}$D(MnMn) + 18.5 kcal mol^?1 and D(CH₃Re) = $\text{1}\text{2}$D(ReRe) + 30.8 kcal mol^?1.     

Synthesis, structural determination and magnetic properties of layered hybrid organic-inorganic, iron (II) propylphosphonate, Fe[(CH3(CH2)2PO3)(H2O)], and iron (II) octadecylphosphonate, Fe[(CH3(CH2)17PO3)(H2O)]

Fe[(CH₃(CH₂)₂PO₃)(H₂O)] (1) and Fe[(CH₃(CH₂)₁₇PO₃)(H₂O)] (2) were synthesized by reaction of FeCl₂·6H₂O and the relevant phosphonic acid in water in presence of urea and under inert atmosphere. The compounds were characterized by elemental and thermogravimetric analyses, UV-visible and IR spectroscopy. The crystal structure of (1) was determined from X-ray single crystal diffraction studies at room temperature: monoclinic symmetry, space group P2₁, , , , and β=98.62(3)°. The compound is lamellar and the structure is hybrid, made of alternating inorganic and organic layers along the c direction. The inorganic layers consist of Fe(II) ions octahedrally coordinated by five phosphonate oxygen atoms and one from the water molecule, separated by bi-layers of propyl groups. A preliminary structure characterization of compound (2) suggests a similar layered structure, but with an interlayer spacing of 40.3 Å. The magnetic properties of the compounds were both studied by a dc and ac SQUID magnetometer. Fe[(CH₃(CH₂)₂PO₃)(H₂O)] (1) obeys the Curie-Weiss law at temperatures above 50 K (, ), indicating a Fe +II oxidation state, a high-spin d⁶ (S=2) electronic configuration and an antiferromagnetic exchange couplings between the near-neighbouring Fe(II) ions. Below , Fe[(CH₃(CH₂)₂PO₃)(H₂O)] exhibits a weak ferromagnetism. The critical temperature of has been determined by ac magnetic susceptibility measurements. Compound (2) shows the same paramagnetic behaviour of the iron (II) propyl derivative. The values of C and θ were found to be and −44 K, respectively, thus suggesting the presence of Fe +II ion in the S=2 spin state and antiferromagnetic interactions between Fe(II) ions at low temperatures. Zero-field and field cooled magnetic susceptibility vs. T plots do not overlap below , suggesting the presence of an ordered magnetic state. The critical temperature, T_N, has been located by the peaks at from the ac susceptibility (χ′and χ″) vs. T plots. Below T_N hysteresis loops recorded in the temperature region show an S-shape, while below 15 K assume an ellipsoid form. They reveal that compound (2) is a weak ferromagnet. The critical temperature T_N in these layered Fe(II) alkylphosphonates is independent of the distance between the inorganic layers.