烯丙基溴化钐与α,β-不饱和醛酮反应合成高烯丙基醇

烯丙基溴与金属钐在室温条件下、THF溶剂中反应生成中间体烯丙基溴化钐,烯丙基溴化钐再与α,β-不饱和醛、酮反应生成高烯丙基醇.烯丙基溴化钐与α,β-不饱和醛、酮发生1,2-加成反应,其与α,β-不饱和酮的反应几乎定量进行,表明该反应具有很好的区域选择性.产物的结构通过IR,1H NMR和MS光谱确证.     

纳米铝粉促进羰基化合物水相烯丙基化反应

氮气保护条件下,纳米铝在0.1 N NH₄Cl溶液中,能有效地促进羰基化合物与烯丙基溴进行Barbier-Grignard型烯丙基化反应,得到相应高烯丙醇。芳香族醛或酮的烯丙基化产率较高,而脂肪族羰基化合物反应产率低,反应产率受羰基空间位阻影响大,在同样条件下,邻羟基羰基化合物烯丙基化产物主要是赤式-邻二醇。     

水相中铟促进下支链高烯丙基醇的合成

通过铟促进下醛与2-苯基-4-溴-2-丁烯在水相中经烯丙基化反应合成一系列的支链高烯丙基醇, 产率较高, 反应条件温和.     

烯丙基溴和锡与醛的选择性加成反应

应用烯丙基溴和锡粉在少量水存在下和四氢呋喃中可使醛选择性烯丙基化,这一反应可用于那些同时含有对格氏试剂有反应活性的羟基、酚羟基、芳香族硝基和酮羰基等官能团的醛类以引入烯丙基生成相应的高烯丙基醇.     

结构新颖的金属双核烯丙基试剂的合成及其芳香醛烯丙基化反应

报道了一个简捷的芳香醛的烯丙基化反应的新体系. 通过使用新型的金属双核烯丙基锡试剂(含有Sn—M键, M=Mn或Fe)与醛在二氯甲烷中反应, 无需使用任何辅助试剂, 直接得到较高产率(42％~98％)的高烯丙基醇. 实验结果证明过渡金属基团及M—Sn键具有相当高的活化锡原子上的烯丙基基团的作用.     

烯丙基类不对称醚异构化反应机理的理论研究

采用MP2和密度泛函M06-2X方法,在6-31++G(d,p)基组水平上对烯丙基类不对称醚异构化反应机理进行了计算研究. 揭示了其可能的反应途径,预测了互变异构吉布斯自由能,活化能等性质. 计算结果表明,在没有金催化剂的条件下,尽管有醇溶剂时异构化活化能垒有所降低,异构化反应依然不容易进行. 相反,存在金催化剂并且有醇溶剂情况下,烯丙基类不对称醚异构化反应活化自由能大大降低,仅为7.5 kcal/mol. 通过比较有无醇溶剂和金催化剂对异构化的影响,揭示了金烯烃络合和醇分子参与反应以质子转移的异构化反应机理,很好解释了实验中观察的现象. 计算结果还表明：醇分子不仅参与反应提供质子转移,它还能与醚竞争金催化剂络合,因此在高浓度醇条件下会抑制异构化反应进行.     

醛的不对称烯丙基化反应研究进展

醛的不对称烯丙基化反应是合成手性烯丙基醇的一类重要方法, 从手性辅基控制反应和化学催化不对称反应两个方面对近20多年来的相关报道进行综述.     

烯丙基碘和锡与醛的选择加成反应

含活性基团的醛可与烯丙碘和锡粉直接进行亲核加成反应，得到高烯丙基的醇，水的存在不利于此反应的进行，与烯丙基溴相比，烯丙基碘反应活性更强，可在短时间内得较高的产率。     

二氧化碳促进的醛和酮等羰基化合物烯丙基化反应研究

加入二氧化碳可以促进羰基化合物的烯丙基化反应. 实验结果表明: 在1.0 MPa的二氧化碳和2 equiv.的锡存在下, 以THF/H₂O为反应介质, 芳香醛化合物与烯丙基溴可以顺利地发生烯丙基化反应得到较高的产率, 而芳香酮化合物和脂肪醛等与烯丙基溴反应只得到较低的产率.     

二甲基烯丙基胺/溴代烷烃系列季铵盐的合成与表征

以溴代烷与二甲基烯丙基胺(DMAA)为原料合成了二甲基烯丙基类季铵盐;探讨了反应温度、原料配比、反应时间及溶剂对反应产率的影响,确定了最佳合成条件;并采用红外光谱仪、核磁共振谱仪(1 H NMR)及质谱仪表征了产物的结构.     

烯丙基溴化钐与羰基化合物反应合成高烯丙基醇

高烯丙基醇是有机合成中的一类非常重要的中间体,以烯丙基金属试剂与羰基化合物加成反应为其主要合成方法,常用的金属烯丙基化合物有烯丙基锂(镁、锌、硼、铟、硅、锡、钛)等.由于烯丙基的Grignard试剂制备过程中常伴随着大量的烯丙基偶联反应,所以用烯丙基的Grignard试剂来合.     

Reactions of N"-acyl- and N"-tosyl-substituted hydrazides of 2-aminobenzoic acid with carbonyl compounds

The reactions of N"-acyl and N"-tosyl-substituted hydrazides of 2-aminobenzoic acid with aliphatic, aromatic, and heterocyclic aldehydes or aliphatic ketones afforded 3-acyl- and 3-tosylamido-1,2-dihydroquinazolin-4-one derivatives, respectively. The structures of the reaction products were established by NMR spectroscopy and X-ray diffraction analysis.     

The formation of novel 1,3-dioxolanes: atypical Baylis-Hillman reaction of a sesquiterpene lactone parthenin

The Baylis-Hillman reaction of a sesquiterpene lactone parthenin with various aldehydes gave unexpected products containing a 1,3-dioxolane moiety. Both small aliphatic and aromatic aldehydes produced 1,3-dioxolanes, whereas higher aliphatic aldehydes produced normal Baylis-Hillman products.     

A SeCSe-Pd(II) pincer complex as a highly efficient catalyst for allylation of aldehydes with allyltributyltin

An air- and moisture-stable SeCSe-Pd(II) pincer complex was synthesized and found to catalyze the nucleophilic allylation of aldehydes with allyltributyltin. The allylation of a variety of aromatic and aliphatic aldehydes to give the corresponding homoallyl alcohols was performed at room temperature to 60 degrees C in yields ranging from 50% (for typical aliphatic aldehydes) to up to 97% (for aromatic aldehydes) using 5 x 10(-3) to 1 mol % of the Pd catalyst. NMR spectroscopic study indicated that a sigma-allylpalladium intermediate was formed and possibly functions as the nucleophilic species that undergoes addition to the aldehydes.     

TiCl3 catalyzed one-pot protocol for the conversion of aldehydes into 5-substituted 1H-tetrazole

An efficient protocol has been explored for the one-pot synthesis of tetrazole derivatives with wide functional group compatibility in moderate to very high yields starting from aliphatic and aromatic substituted aldehydes. The reaction proceeds via non-isolated oxime and nitrile intermediates. The structures of the products were confirmed by IR and NMR spectroscopy. A plausible reaction mechanism is also provided.     

曙红催化的缩醛化反应研究

以醇溶性曙红为催化剂,在温和条件下高效催化缩醛化反应,该催化体系适应于不同种类的脂肪醛或芳香醛与短链一元醇或二元醇的羰醇缩合反应,于室温反应24 h,缩醛化产物收率58%~99%,其结构经¹H NMR, ¹³C NMR和HR-MS确证。     

PN Bond Cleavage during the Insertion of Carbon Fragments into PIIIN Bonds in Bis(diphenylphosphino) Amines

The reaction of tertiary amine functionalized phosphines with aromatic and aliphatic aldehydes gives insertion of carbon fragments into the P^III? N bonds or P^III? N bond cleavage. The reaction of bis(diphenylphosphino) amines, 1a – 1c , with two equiv. of aldehydes in toluene afforded the P^III? N bond inserted products, 2a – 4a, 4b – 6b , and 3c – 5c , in moderate‐to‐good yield. The products were characterized by IR, ¹H‐ and ³¹P‐NMR spectroscopy and elemental analysis.     

Highly diastereoselective boron and titanium mediated aldol reactions of a mannitol derived 2,3-butanediacetal ethyl ketone

A mannitol derived 2,3-butanediacetal ethyl ketone displays high levels of diastereoselectivity in boron and titanium mediated aldol reactions with a range of aliphatic and aromatic aldehydes to afford syn aldol products in high yield. The stereochemical outcome of the reaction was determined using J-value analysis, NMR analysis of O-acetylmandelate derivatives and X-ray crystallography.     

2-氨基-4,5-二取代烃嘧啶类衍生物的新合成方法

研究了2-氨基-4,5-二烃基取代嘧啶类衍生物的一个新的简易合成方法,该方法以简单且廉价的4个芳香醛和3个脂肪醛为原料,经过四步反应得到12个2-氨基-4,5-二烃基取代嘧啶类化合物,总收率在40%～70%,经氢核磁共振(1H NMR)、碳核磁共振(13C NMR)和高效液质联用(LC-MS)对其目标产物进行表征.     

Facile Montmorillonite K-10-Supported Synthesis of Xanthene Derivatives Under Microwave and Thermal Conditions

Microwave-assisted and thermal condensations of aromatic and aliphatic aldehydes with β-naphthol adsorbed onto montmorillonite K-10 were conducted in a one-pot procedure leading to the formation of a variety of xanthene derivatives. Under microwave irradiation, reactions completed within 4–6 min. The procedure is applicable to both aromatic and aliphatic aldehydes, and the catalyst was recycled and reused efficiently in later reactions.