基于信息扩散的模糊关系矩阵的三种构造方法及适用条件

介绍了由信息扩散技术生成原始信息矩阵的方法,以及由原始信息矩阵构造模糊关系矩阵的三种实用方法,最后通过实例分析,给出了这三种模糊关系矩阵的适用条件.     

Fuzzy关系矩阵传递闭包的截矩阵-Warshall算法

根据模糊矩阵的截矩阵性质,提出了利用截矩阵求模糊关系矩阵传递闭包的一种新算法。     

基于相容性的语言判断矩阵的不一致性调整的新方法

语言判断矩阵是决策者给出的一种重要的偏好信息形式.本文定义了语言判断矩阵对应的导出矩阵,语言判断矩阵一致性等概念,研究了语言判断矩阵导出矩阵与其特征矩阵的相容性和一致性的关系,在此基础上定义了语言判断矩阵与其特征矩阵的偏差矩阵,由此给出了语言判断矩阵不一致性调整的新方法.实例分析表明该方法行之有效.     

Riordan 矩阵在广义 Motzkin 路计数中的应用

用Riordan矩阵的方法研究了具有4种步型的加权格路(广义Motzkin路)的计数问题,引入了一类新的计数矩阵,即广义Motzkin矩阵.同时给出了这类矩阵的Riordan表示,也得到了广义Motzkin路的计数公式.Catalan矩阵,Schrder矩阵和Motzkin矩阵都是广义Motzkin矩阵的特殊情形.     

AHP中判断矩阵一致性改进的迭代算法

本文研究了扰动矩阵与判断矩阵的不一致性的关系 ,提出了一种新的改进判断矩阵一致性的迭代算法 .     

区间数互补判断矩阵的一种新排序算法

针对区间数互补判断矩阵元素表示的特点,定义了区间数互补判断矩阵的等价矩阵族,得到了区间数互补矩阵一致性检验方法.通过构造一种新的求解区间数互补判断矩阵的权重区间的决策模型,得到一种排序算法.最后给出一个算例,描述此方法的应用.     

幂等矩阵的性质及其推广

首先对幂等矩阵的简单性质进行了归纳总结,接着论证了幂等矩阵的等价条件及其特征值的取值范围,并讨论了幂等矩阵与实对称矩阵的关系、幂等矩阵与其伴随矩阵的特征值和特征向量的对应关系及幂等矩阵在群逆中的一个性质.最后讨论了幂等矩阵的两种分解形式.     

Toeplitz型矩阵的逆矩阵的快速三角分解算法

针对有关“型”矩阵的三角分解问题 ,提出了一种 Toeplitz型矩阵的逆矩阵的快速三角分解算法 .首先假设给定 n阶非奇异矩阵 A,利用一组线性方程组的解 ,得到 A- 1的一个递推关系式 ,进而利用该关系式得到 A- 1的一种三角分解表达式 ,然后从 Toeplitz型矩阵的特殊结构出发 ,利用上述定理的结论 ,给出了Toeplitz型矩阵的逆矩阵的一种快速三角分解算法 ,算法所需运算量为 O( mn2 ) .最后 ,数值计算表明该算法的可靠性 .     

求首尾和r-循环矩阵的极小多项式的算法

研究了域上首尾和r-循环矩阵，利用多项式环的理想的Groebner基的算法给出了任意域上首尾和r-循环矩阵的极小多项式和公共极小多项式的一种算法.同时给出了这类矩阵逆矩阵的一种求法。     

跳行范德蒙矩阵的三角分解

跳行范德蒙矩阵是一种重要的矩阵,在函数插值等方面有着重要的应用.根据跳行范德蒙矩阵的特殊结构,将跳行范德蒙矩阵分解为一系列下三角矩阵与一系列上三角矩阵的乘积.进一步给出了其逆矩阵分解为一系列上三角矩阵与一系列下三角矩阵的乘积的表达式.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Peridynamics via finite element analysis

Peridynamics is a recently developed theory of solid mechanics that replaces the partial differential equations of the classical continuum theory with integral equations. Since the integral equations remain valid in the presence of discontinuities such as cracks, the method has the potential to model fracture and damage with great generality and without the complications of mathematical singularities that plague conventional continuum approaches. Although a discretized form of the peridynamic integral equations has been implemented in a meshless code called EMU, the objective of the present paper is to describe how the peridynamic model can also be implemented in a conventional finite element analysis (FEA) code using truss elements. Since FEA is arguably the most widely used tool for structural analysis, this implementation may hasten the verification of peridynamics and significantly broaden the range of problems that the practicing analyst might attempt. Also, the present work demonstrates that different subregions of a model can be solved with either the classical partial differential equations or the peridynamic equations in the same calculation thus combining the efficiency of FEA with the generality of peridynamics. Several example problems show the equivalency of the FEA and the meshless peridynamic approach as well as demonstrate the utility and robustness of the method for problems involving fracture, damage and penetration.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

The Cauchy problem for ut=Δu+|∇u|

With q a positive real number, the nonlinear partial differential equation in the title of the paper arises in the study of the growth of surfaces. In that context it is known as the generalized deterministic KPZ equation. The paper is concerned with the initial-value problem for the equation under the assumption that the initial-data function is bounded and continuous. Results on the existence, uniqueness, and regularity of solutions are obtained.     

含有批处理机的三机流水作业加工总长问题在某些情形下的强NP困难性

本文研究含有批处理机的三台机器流水作业加工总长问题在某些情形下的计算复杂性。在批处理机上同时加工的工件组成一个工件批，一个工件批的所有工件同时开始、同时结束。当批处理机的容量有限时，我们证明了下列情形为强NP困难的：第一台机器是批处理机、其余两台机器是单机；第二台机器是单机、其余两台机器是批处理机；第三台机器是批处理机、其余两台机器是单机。     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

Dynamical Spin Susceptibility in the t–J Model in the Superconducting Phase

Dynamical spin susceptibility is calculated for the t–J model in the superconducting phase using the memory function method in terms of the Hubbard operators. The self-consistent system of equations for the memory function is obtained within the mode-coupling approximation. Both itinerant hole excitations and localized spin fluctuations contribute to the memory function. Moreover, the itinerant contribution itself consists of two parts, i.e., the contribution of Bogoliubov quasiparticles and that of Cooper pairs. The spin dynamics is diffusive in the hydrodynamic limit, but the itinerant part does not contribute to the spin diffusion. In the high frequency region, spin–wave-like excitations continue to exist. We discuss our analytic results in the light of neutron scattering experiments performed on the cuprate superconductors.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

基于VAR风险指标的投资组合模糊优化

在二目标有价证券选择基础上 ,引入目前流行的风险指标 VAR,以收益率与风险损失为目标 ,将模糊概念运用于有价证券组合选择 ,按投资者给定的期望目标及容差 ,讨论了 S型隶属函数模型 .通过 VAR的给定 ,将投资者所能承受的最大损失锁定 ,更好地反映出投资者对目标值的取值意图 .依据深圳股票市场9只股票收益率数据 ,采用进化规划进行优化计算 ,并验证模型的有效性 .