Pure graphite as a reference material for the determination of trace elements — an interlaboratory collaborative study

Seven synthetic graphite powders of different grade of purity were analyzed by means of INAA, WDXRF, EDXRF, DC-OES directly and using ICP-MS, ICP-OES, ETAAS and FAAS in combination with various sample preparation techniques. On the basis of a statistical evaluation of the results obtained, for the trace elements Al, Ca, Cr, Cu, Fe, Mn and Ni, reference values were established and, for the elements As, Co, Mg, Mo, Pb, Sb, Si, Sr, Ti, V, Zn and Zr, informative values are given. The analyzed reference materials are commercially available.     

Characterization of a potato reference material for major, minor and trace elements

Summary A potato reference material (RM) was prepared for the analytical quality control program to be employed by the Sub-network on Trace Elements in Food of the FAO European Co-operative Network on Trace Elements. Approximately 50 kg of commercially available potato granules prepared from baked, mashed and roller-dried potatoes, containing 2.8% ash and 3 mg/kg added butylhydroxyanisole was purchased. The granules were carefully homogenised in large glass cylinders followed by division into 50 g portions into numbered acid-washed bottles. The bottled material was tested for homogeneity by taking ten bottles throughout the bottling line and determining by validated atomic absorption spectrometric methods 1.0 g samples for seven mineral elements. Homogeneity for Mg, Ca, Zn, Fe, Mo, Ni and Cd was better than 5%. An international network on experienced, high-quality reference laboratories was established to conduct an interlaboratory comparison study on the determination of 14 mineral elements in the RM. A total of seven methods based on independent analytical principles were employed by the reference laboratories. After excluding outlying analytical results, the criteria defined by the IAEA were used for classification of the overall medians obtained through the interlaboratory comparison study. The relative standard deviations for the 95% confidence limits of the medians were as follows: P=4.2%, K=0.7%, Na=4.7%, Ca=5.5%, Mg=2.4%, Fe=9.3%, Mn=4.0%, Zn=3.6%, Cu=4.7%, Mo=23%, Ni=22%, Cr=19%, Pb=11% and Cd=4.6%. With the exception of Cr, all of the recommended concentration values obtained for the above indicated elements fell into category A, i.e. values recommended with a high degree of confidence according to the classification criteria of the IAEA. The present RM is the only certified potato RM currently available for mineral elements.

---

Charakterisierung eines Kartoffel-Referenzmaterials für Haupt-, Neben- und Spurenelemente

     

Pure graphite as a reference material for the determination of trace elements — an interlaboratory collaborative study

 Seven synthetic graphite powders of different grade of purity were analyzed by means of INAA, WDXRF, EDXRF, DC-OES directly and using ICP-MS, ICP-OES, ETAAS and FAAS in combination with various sample preparation techniques. On the basis of a statistical evaluation of the results obtained, for the trace elements Al, Ca, Cr, Cu, Fe, Mn and Ni, reference values were established and, for the elements As, Co, Mg, Mo, Pb, Sb, Si, Sr, Ti, V, Zn and Zr, informative values are given. The analyzed reference materials are commercially available. Received: 12 February 1996/Revised:27 March 1996/Accepted:2 April 1996     

Quality assurance for the analytical data of micro elements in food

The micro element content of food is an important quality index due to the action of these elements on human health. In this article, we discuss how to ensure the reliability of analytical data on micro elements in order to truly represent the condition of food. Sampling, treatment of the analytical sample, selection of the analytical method, standard solution, and certified reference material, blank test, calibration of the instrument and equipment, application of the quality control chart, assessment of the final analytical result, and quality assurance system are briefly described. Received: 5 July 2001 Accepted: 19 November 2001     

Certified reference material (CRM 414) for the quality control of trace element analysis in plankton

Summary Analyses of plankton are performed by a number of organisations to investigate the transfer and uptake of toxic elements along the trophic chain and to monitor the levels of contamination of different aquatic environments. In order to obtain reliable transfer functions in environmental models or to use plankton as an indicator organism for the assessment of environmental pollution, these analyses should give accurate results. As accuracy requires quality control and the application of certified reference materials (CRMs), a certification campaign has been conducted by the Community Bureau of Reference (BCR). A plankton material was collected in a freshwater pond, lyophilised, homogenised and bottled and its homogeneity and long-term stability were verified. The material (CRM 414) was analysed by a group of 15 selected laboratories having given proof of their adequate QC and using different analytical methods. The contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Se, V and Zn are certified. This paper presents the certification work performed.     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.     

Czechoslovakian biological certified reference materials and their use in the analytical quality assurance system in a trace element laboratory

Summary The Trace Element Laboratory of the University of Agriculture in Prague (CSFR) participated successfully in interlaboratory experiments on the determination of the contents of trace elements in seven Czechoslovakian reference materials. Czechoslovakian certified reference material CRM 12-02-01 (Bovine liver) was used for the development of a new analytical method using the Dry Mineralizer Apion as well as in analytical quality assessment of data in the determination of Cd, Pb, and Hg contents in routinely analyzed animal tissues.     

Determination of multielements in a typical Japanese diet certified reference material by instrumental neutron activation analysis.

Multielements in a typical Japanese diet certified reference material prepared at the National Institute for Environmental Studies (NIES) of Japan, in collaboration with the National Institute of Radiological Sciences (NIRS) of Japan were determined by instrumental neutron activation analysis (INAA). Five samples (ca. 510-1000 mg) and comparative standards were irradiated for a short time (10 s) at a thermal neutron flux of 1.5 x 10(12) n cm(-2) s(-1) (pneumatic transfer) and for a long time (6 h) at a thermal neutron flux of 3.7 x 10(12) n cm(-2) s(-1) (central thimble) in the Rikkyo University Research Reactor (TRIGA Mark-II, 100 kW). The irradiated samples were measured by conventional gama-ray spectrometry using a coaxial Ge detector, and by anti-coincidence and coincidence gamma-ray spectrometry with a coaxial Ge detector and a well-type NaI(Tl) detector. The concentrations of 38 elements were determined by these methods.     

Trace elements in food reference materials: compositional and analytical perspectives

Selection criteria for production of food reference materials need to simultaneously consider realistic proximate matrix compositions, emerging trends for the nutritional and toxicological effects of less-emphasized trace elements (e.g., B, Li, Si, and V), chemical speciation (especially for As, Hg, Se, and Sn), and analyte certification requirements from the analyst's point of view. For the most part, currently available Certified Reference Materials (CRMs) do not meet many of these needs. Candidate CRMs with relevant concentrations of trace elements could be chosen from similar foods with different proximate compositions (e.g., fat content of milk products, meat, or soya flour). Explicit guidance must accompany CRMs so that variations in measured trace element concentrations arising from procedural lapses and basis weight are avoided.     

Certified reference material (CRM 397) for the quality control of trace element analysis of human hair

Summary Analyses of human hair are routinely performed by a number of organisations to monitor the level of exposure of a population to toxic elements, e.g. heavy metals. To control the quality of such determinations, the Community Bureau of Reference (BCR) has produced a reference material (CRM 397) certified for its contents of Cd, Hg, Pb, Se and Zn. This material was collected in a moderately contaminated area, carefully prepared and its homogeneity and long term stability were verified. This paper presents the certification work performed.     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Determination of minor and trace elements in Turkish diet by duplicate portion technique

The minor and trace element content of diet samples from two different social population groups were determined. Samples were prepared by duplicate portion technique by colecting everything 16 subjects ate and drank during a 3-day period. Samples were homogenized, freeze-dried and elemental concentrations of Br, Co, Cr, Cs, Fe, K, Na, Rb, Sc, Se and Zn were determined by instrumental neutron activation analysis. Elemental concentrations and daily dietary intake of the elements were compared with the diets of other nations.     

Unique quality assurance aspects of INAA for reference material homogeneity and certification

Summary Instrumental neutron activation analysis (INAA) has become one of the primary analytical techniques for certification of elemental content in biological Standard Reference Materials (SRMs) at the National Institute of Standards and Technology (NIST). One important reason why INAA has become so widely used and valuable in the certification of NIST SRMs is that INAA has unique inherent quality assurance (QA) characteristics which provide the capability for accurate analysis and which often allow the analytical values obtained to be internally evaluated and cross checked. While the NAA technique has the general characteristics of most spectroscopic techniques, the specific characteristics include uniform activation, long and well-documented excited states, highly penetrating emitted radiation, and an excited state decay process which is statistically random in nature. These characteristics work together to provide an analytical technique which can provide highly reliable analytical results and is particularly suitable for the certification of major, minor, and trace elements in biological reference materials.     

An international interlaboratory study for the production of a sewage sludge certified reference material for routine use in inorganic quality control

Two existing interlaboratory schemes are used to certify a sewage sludge reference material. Data from the analysis (As, Cd, Cr, Cu, Pb, Hg, Ni and Zn) of the material using routine procedures, US EPA and Netherlands NEN, plus INAA and IDMS and an interlaboratory comparison in Eastern Europe have been examined. The Dutch results show significantly lower analytical results for As for the graphite furnace technique compared to HG-AAS, probably due to matrix-effects. The differences between the Dutch and USA results for Cr and Ni suggest that the USEPA 3050A digestion method for dissolution of the metals is less aggressive for this material compared to aqua regia destruction. For international comparability of analytical data it is essential to harmonize method dependent dissolution/extraction techniques. The preparation of reference materials which mimic real samples and certification by ILS result in useful materials for quality control.     

Instrumental neutron activation analysis for quality assurance of a hair reference material for mercury speciation

Instrumental neutron activation analysis (INAA) has been employed in the investigation of mass balance for mercury species analysis in the analytical process. A new human hair reference material (IAEA-085) was analyzed for methylmercury using a solid/liquid extraction procedure, with samples of extracts, residues, and untreated samples being analyzed by INAA. The certified reference material NIES CRM No. 13, human hair, was analyzed in parallel. From the results obtained through the mass balance studies, it was found that the extraction procedure was quantitatively complete, and that there was no difference between the mass balance of Hg and the total Hg in the untreated materials.     

Mineral oil content in sediments and soils: comparability, traceability and a certified reference material for quality assurance

The performance of twelve laboratories with previously established proficiency in the determination of the mineral oil content in a fresh water sediment is described. The summation parameter total petrol hydrocarbon (TPH) is defined according to ISO 16703:2004 with regard to the sample preparation to be applied, the flame ionisation detection (FID) and the boiling range of C₁₀–C₄₀ to be integrated. Comprehensive tests of homogeneity and stability have been carried out on the candidate material using appropriate models. The outcome of the study served as the basis for the certification of the candidate reference material as ERM-CC015a. The certified mass fraction is 1,820±130mgkg⁻¹and traceability was established by using an appropriate calibration standard certified for the mass fraction of C₁₀–C₄₀. The interlaboratory scatter of measurement results in this exercise can largely be explained by the variability of the individual calibrations based on this common calibration standard.