Influence of rotation and generalized magneto-thermoelastic on Rayleigh waves in a granular medium under effect of initial stress and gravity field

Influence of rotation, relaxation times, magnetic field, initial stress and gravity field on attenuation coefficient (Imaginary part of frequency equation root) and Rayleigh waves velocity (the real part of frequency equation root) in an elastic half-space of granular medium is studied. The analytical solution is obtained by using Lame’s potential techniques. The numerical calculations are carried out for the frequency equation of Rayleigh waves velocity. The results are displayed graphically. Some results of previous investigations are deduced as special cases from this study.     

Wave propagation in transversely isotropic porous piezoelectric materials

Wave propagation in porous piezoelectric material (PPM), having crystal symmetry 6 mm, is studied analytically. Christoffel equation is derived for the propagation of plane harmonic waves in such a medium. The roots of this equation give four complex wave velocities which can propagate in such materials. The phase velocities of propagation and the attenuation quality factors of all these waves are described in terms of complex wave velocities. Phase velocities and attenuation of the waves in PPM depend on the phase direction. Numerical results are computed for the PPM BaTiO₃. The variation of phase velocity and attenuation quality factor with phase direction, porosity and the wave frequency is studied. The effects of anisotropy and piezoelectric coupling are also studied. The phase velocities of two quasi dilatational waves and one quasi shear waves get affected due to piezoelectric coupling while that of type 2 quasi shear wave remain unaffected. The phase velocities of all the four waves show non-dispersive behavior after certain critical high frequency. The phase velocity of all waves decreases with porosity while attenuation of respective waves increases with porosity of the medium. The characteristic curves, including slowness curves, velocity curves, and the attenuation curves, are also studied in this paper.     

非局部广义热弹性理论下半导体微结构中波的反射研究

论文基于非局部热弹性理论,研究了纳米半导体介质中波的反射问题。首先建立了在耦合的非局部弹性理论,波型热传导理论和等离子扩散理论下问题的控制方程;然后运用谐波法,得到耗散方程的解以及反射系数率的解析表达式;最后通过数值计算给出了硅纳米结构中相速度、群速度随非局部参数的变化,讨论了非局部参数、热电耦合参数以及热弹性耦合参数对反射系数率的影响。     

基于积分方程方法的弹性波多重散射计算

运用积分方程方法计算了含多个随机分布椭圆柱型孔洞的随机非均匀介质中相干波的速度和衰减系数,分析了这种介质的频散特性。首先,建立了散射位移场满足的积分方程,推导了单个椭圆柱孔洞的散射截面计算公式。接着分析了在含多个随机分布椭圆柱型孔洞的随机非均匀介质中弹性波的多重散射,给出在统计平均意义下的相干波的波速和衰减系数计算公式。然后用Matlab进行了编程,给出了一个数值算例,并将计算结果与波函数展开法进行了比较,分析了随机空隙介质的频散特征及其孔洞椭圆偏心率和材料空隙率的影响。     

Analysis of plane waves in anisotropic thermoelastic diffusive medium

This paper concentrates on the study of the propagation of harmonic plane waves in a homogeneous anisotropic thermoelastic diffusive medium in the context of different theories of thermoelastic diffusion. It is found that five types of waves propagate in an anisotropic thermoelastic diffusive medium, namely a quasi-elastodiffusive (QED-mode), two quasi-transverse (QSH-mode and QSV-mode), a quasi-mass diffusive (QMD-mode) and a quasi-thermo diffusive (QTD-mode) wave. The governing equations for homogeneous transversely isotropic diffusive medium in different theories of thermoelastic diffusion are taken as a special case. It is noticed that when plane waves propagate in one of the planes of transversely isotropic thermoelastic diffusive solid, purely quasitransverse wave mode(QSH) decouples from rest of the motion and is not affected by the thermal and diffusion vibrations. On the other hand, when plane waves propagate along the axis of solid, two quasi-transverse wave modes (QSH and QSV) decouple from the rest of the motion and are not affected by the thermal and diffusion vibrations. From the obtained results, the different characteristics of waves like phase velocity, attenuation coefficient, specific loss and penetration depth are computed numerically and presented graphically for a single crystal of magnesium. The effects of diffusion and relaxation times on phase velocity, attenuation coefficient, specific loss and penetration depth has been studied. Some particular cases are also discussed.     

Rayleigh-type waves in a water-saturated porous half-space with an elastic plate on its surface

The paper deals with the plane problem of steady-state time harmonic vibrations of an infinite elastic plate resting on a water-saturated porous solid. The displacements of the plate are described by means of the linear theory of small elastic oscillations. The motion of the two-phase medium is studied within the framework of Biot's linear theory of consolidation. The main interest is focused on the investigation of properties of the Rayleigh-type waves propagating alongside of the contact surface between the plate and the porous half-space. In particular, the dependence of the phase velocity and attenuation of the waves on the plate stiffness, mass coupling coefficient, and degree of saturation of the medium is studied. Besides, for the limiting case of an infinitely thin plate, the comparison of the wave characteristics is carried out with those of the pure Rayleigh waves.     

Reflection and transmission of elastic waves at an interface with consideration of couple stress and thermal wave effects

The reflection and transmission of the thermo-elastic coupled waves at an interface of two different couple stress elastic solids are studied in this paper. Based on the Green-Lindsay theory, the governing equations and the constitutive equations are derived. Different from the classic elastic solid, the interface conditions include the surface couple, the rotation angle, the heat flux and the temperature change. The interface conditions are used to obtain the linear algebraic equations set from which the amplitude ratios of reflection and transmission waves to the incident wave can be determined. Then, the normal energy flux conservation is used to validate the numerical results. At last, the influences of two characteristic relaxation times and the five kinds of thermally and micromechanically interface conditions are discussed based on the numerical results. It is found that the thermal wave effects affect only the longitudinal wave while the couple stress effects affect only the transverse waves. The thermo-elastic coupling makes the longitudinal wave and the thermal wave not only dispersive but also attenuated.     

Thermo-elastic interaction without energy dissipation in an infinite solid with distributed periodically varying heat sources

The paper deals with the thermo-elastic interactions due to distributed periodically varying heat sources in a homogeneous, isotropic, unbounded elastic medium in the context of the theory of thermo-elasticity without energy dissipation. Closed form solutions for displacement, temperature, stress and strain are derived by using Laplace transform on time and then Fourier transform on space. It reveals that the interactions consist of two coupled modified dilatational and thermal waves modified by finite thermal wave speed and thermo-elastic coupling traveling with finite speeds and without attenuation. The results are compared with previous results derived by using other generalized thermo-elasticity theories. Numerical results for a hypothetical material are presented.     

Effect of a biasing electric field on the propagation of symmetric Lamb waves in piezoelectric plates

This paper is concerned with the effect of a biasing electric field on the propagation of Lamb waves in a piezoelectric plate. On the basis of three dimensional linear elastic equations and piezoelectric constitutive relations, the differential equations of motion under a biasing electric field are obtained and solved. Due to the symmetry of the plate, there are symmetric and antisymmetric modes with respect to the median plane of the piezoelectric plate. According to the characteristics of symmetric modes (odd potential state) and antisymmetric modes (even potential state), the phase velocity equations of symmetric and antisymmetric modes of Lamb wave propagation are obtained for both electrically open and shorted cases. The effect of a biasing electric field on the phase velocity, electromechanical coupling coefficient, stress field and mechanical displacement of symmetric and antisymmetric Lamb wave modes are discussed in this paper and an accompanying paper respectively. It is shown that the biasing electric field has significant effect on the phase velocity and electromechanical coupling coefficient, the time delay owning to the velocity change is useful for high voltage measurement and temperature compensation, the increase in the electromechanical coupling coefficient can be used to improve the efficiency of transduction.     

Lamb waves in micropolar thermoelastic solid plates immersed in liquid with varying temperature

In the present paper the theory of micropolar generalized thermoelastic continua has been employed to study the propagation of plane waves in micropolar thermoelastic plates bordered with inviscid liquid layers (or half-spaces) with varying temperature on both sides. The secular equations in closed form and isolated mathematical conditions are derived and discussed. Thin plate and short wave length results have also been deduced under different cases and situations and discussed as special cases of this work. The results in case of conventional coupled and uncoupled theories of thermoelasticity can be obtained both in case of micropolar elastic and elastokinetics from the present analysis by appropriate choice of relevant parameters. The various secular equations and relevant relations have been solved numerically by using functional iteration method in order to illustrate the analytical developments. Effect of characteristic length and coupling factors have also been studied on phase velocity. The computer simulated results in case of phase velocity, attenuation coefficient and specific loss of symmetric and skew symmetric are presented graphically.     

Propagation characteristics of thermoelastic waves in piezoelectric (6 mm class) rotating plate

The propagation of Lamb waves in a homogeneous, transversely isotropic (6 mm class), piezothermoelastic plate rotating with uniform angular velocity about normal to its boundary has been investigated. The generalized (non-classical) theories of thermoelasticity in contrast to Sharma and Pal [Sharma, J.N., Pal, M., 2004. Lamb wave propagation in transversely isotropic piezothermoelastic plate. J. Sound Vib. 270, 587–610] have been used to investigate the problem. The surfaces of the plate are subjected to stress free, thermally insulated/isothermal and electrically shorted boundary conditions. Secular equations for wave propagation modes in the plate are derived from a coupled system of governing partial differential equations of linear piezothermoelasticity. After obtaining the complex characteristic roots with the help of Descartes' algorithm, the transcendental secular equations have been solved by functional iteration numerical technique to compute phase velocity and attenuation coefficient. Finally, in order to illustrate the analytical development, numerical solution of secular equations is carried out for PZT-5A piezo-thermoelastic material. The corresponding simulated results of various physical quantities such as phase velocity, attenuation coefficients, specific loss factor of energy dissipation, thermo-mechanical coupling factor and relative frequency shifts have been presented graphically for both rotating and non-rotating plates for comparison purpose. There is a scope for extension of the present work to other classes of piezo/pyroelectric crystals. The study will be useful in design and construction of gyroscope, rotation sensors, temperature sensors and other pyro/piezoelectric surface acoustic wave (SAW) devices.     

Effect of rotation on generalized thermo-viscoelastic Rayleigh–Lamb waves

The present paper is aimed at studying the effects of rotation on the thermoelastic interaction in an infinite Kelvin–Voigt-type viscoelastic, thermally conducting plate rotating about the normal to its faces with uniform angular velocity. This facilitates the decoupling of anti-plane/in-plane motion which is not possible, in general. The upper and lower surfaces of the plate are subjected to stress-free, thermally insulated or isothermal conditions. The formulation is applied according to three theories of the generalized thermoelasticity: Lord-Shulman with one relaxation time, Green–Lindsay with two relaxation times, as well as the coupled theory. Secular equations are derived for the plate in closed form isolated mathematical conditions for symmetric and skew-symmetric wave mode propagation in completely separate terms. In the absence of mechanical relaxations (Rotation and viscous effects), the results for generalized and couple theories of thermoelasticity were obtained as particular cases from the derived secular equations. In the absence of thermomechanical coupling, the analysis for a viscoelastic plate can be deduced from the present one. Finally the numerical solution is carried out for copper material. The function iteration numerical scheme is used to solve the complex secular equations, in order to obtain phase velocity and attenuation coefficients of propagating wave mode. The dispersion curves and attenuation coefficients profiles so obtained for symmetric and skew-symmetric wave modes are presented graphically to illustrate and compare the theoretical results in the presence and absence of rotation. The study may be useful in the construction and design of gyroscopes and rotation sensors as well as in the application in diverse fields.     

Effects of covering layer thickness on Love waves in functionally graded piezoelectric substrates

An analytical approach is used to investigate the effects of covering layer thickness on the propagation behavior of Love waves in functionally graded piezoelectric materials (FGPMs) covered with a dielectric layer. The piezoelectric substrate is polarized in the direction perpendicular to the wave propagation plane, and its material parameters change continuously along the thickness direction. The dispersion equations for the existence of Love waves with respect to phase velocity are obtained for electrically open and shorted cases, respectively. A detailed investigation of the effects of the covering dielectric layer thickness on dispersion curve, phase velocity, group velocity, and electromechanical coupling factor is carried out. Numerical results show that for a given FGPM, the covering dielectric layer thickness affects significantly the fundamental mode of Love waves but has only negligible effects on the high-order modes. The changes in phase velocity, group velocity, and electromechanical coupling factor due to the change of gradient coefficient of FGPMs could be approached approximately by changing the thickness of the covering dielectric layer, which imply a potential factor for designing new-type surface wave devices with FGPMs.     

SH Waves in(1-x)Pb(Mg_(1/3)Nb_(2/3))O_(3-x)PbTiO_3 Piezoelectric Layered Structures Loaded with Viscous Liquid

The velocity dispersion and attenuation of shear horizontal(SH) waves in a layered piezoelectric structure loaded with viscous liquid is studied,where the(1- x)Pb(Mg_(1/3)Nb_(2/3))O_(3-x)PbTiO_3[PMN-xPT]single crystal is chosen as the piezoelectric layer.The PMN-xPT is being polarized along[011]_c and[001]_c so that the macroscopic symmetries are mm 2 and 4 mm,respectively.For the nonconductive liquid,the electrically open and shorted conditions at the interface between the liquid and the piezoelectric layer are considered.The phase velocity equations are derived analytically.The effects of the electrically boundary condition,the viscous coefficient and mass density of liquid as well as the thickness of the PMN-xPT layer on the phase velocity and attenuation are graphically illustrated.The results show that the phase velocity for the[011]_c polarized PMN-0.29 PT is much smaller than that for the[001]_c polarized PMN-0.33 PT,and the effects of viscous coefficient and piezoelectric layer thickness on the phase velocity for the[011]_c case are stronger than that for the[001]_c case.In addition,the electrical boundary conditions have an obvious influence on the propagation behaviors.These results can be useful for the designs and applications of acoustic wave devices and liquid biosensors.     

PROPAGATION OF SURFACE ACOUSTIC WAVES IN PRESTRESSED ANISOTROPIC LAYERED PIEZOELECTRIC STRUCTURES

The propagation of surface acoustic waves in layered piezoelectric structures withinitial stresses is investigated.The phase velocity equations are obtained for electrically free andshorted cases,respectively.Effects of the initial stresses on the phase velocity and the electrome-chanical coupling coefficient for the fundamental mode of the layered piezoelectric structures arediscussed.Numerical results for the c-axis oriented fihn of LiNbO_3 on a sapphire substrate aregiven.It is found that the fractional change in phase velocity is a linear function with the ini-tial stresses,and the electromechanical coupling factor increases with an increase of the absolutevalues of the compressive initial stresses.The results are useful for the design of surface acousticwave devices.     

TRANSVERSAL INERTIAL EFFECT ON RELAXATION/RETARDATION TIME OF CEMENT MORTAR UNDER HARMONIC WAVE

Under dynamic loading, the constitutive relation of the cement mortar will be significantly affected by the transversal inertial effect of specimens with large diameters. In this paper, one-dimensional theoretical analysis is carried out to determine the transversal inertial effect on the relaxation/retardation time of the cement mortar under the harmonic wave. Relaxation time or retardation time is obtained by means of the wave velocity, attenuation coefficient and the frequency of the harmonic wave. Thus, the transversal inertial effect on the relaxation time from Maxwell model, as well as on retardation time from Voigt model is analyzed. The results show that the transversal inertial effect may lead to the increase of the relaxation time, but induce the decrease of the retardation time. Those should be taken into account when eliminating the transversal inertial effect in applications.     

Reflection and Transmission of Elastic Waves at the Interface Between Water and a Double Porosity Solid

The reflection and transmission of an incident plane wave at an interface between water and a fluid-saturated double porosity solid are investigated. The properties of the three compressional waves and one shear wave in double porosity media are discussed in detail. The effect of the viscosity, permeability, and porosity on the phase velocity and attenuation of four bulk waves is presented. Comparison between the double porosity theory and the Biot theory reveals that there exists obvious difference in the phase velocity, attenuation and the reflection and transmission coefficients. Two cases of boundary conditions, i.e., the sealed-pore and the open-pore boundaries, are introduced in the numerical calculation. At last, the effect of the fracture permeability and porosity on the reflection and transmission coefficients considered. It is revealed that the amplitudes of the reflected and transmitted waves strongly depend the boundary condition, fracture permeability, and porosity.     

A physical model of the structure and attenuation of shock waves in metals

In this paper, a physical model of the structure and attenuation of shock waves in metals is presented. In order to establish the constitutive equations of materials under high velocity deformation and to study the structure of transition zone of shock wave, two independent approaches are involved. Firstly, the specific internal energy is decomposed into the elastic compression energy and elastic deformation energy, and the later is represented by an expansion to third-order terms in elastic strain and entropy, including the coupling effect of heat and mechanical energy. Secondly, a plastic relaxation function describing the behaviour of plastic flow under high temperature and high pressure is suggested from the viewpoint of dislocation dynamics. In addition, a group of ordinary differential equations has been built to determine the thermo-mechanical state variables in the transition zone of a steady shock wave and the thickness of the high pressure shock wave, and an analytical solution of the equations can be found provided that the entropy change across the shock is assumed to be negligible and Hugoniot compression modulus is used instead of the isentropic compression modulus. A quite approximate method for solving the attenuation of shock wave front has been proposed for the flat-plate symmetric impact problem.     

Characteristics of Wave Propagation in The Saturated Thermoelastic Porous Medium

Took into consideration the coupling effect of thermo, hydraulics and mechanics, a set of thermo–hydro-mechanical coupled wave equations for fluid–saturated soil are developed. In these wave equations, the $P_{3}$ -wave in solid phase and $P_{4}$ -wave in fluid phase are coupled into $T$ -wave in fluid–saturated soil by the assumption that the temperature of the solid phase is equal to the temperature of liquid phase at the same position. The dispersion equations for the thermo-elastic wave, which can be degraded to the equations for elastic wave in fluid–saturated soil, are derived from the above equations by introducing four potential functions. Then, these equations are solved numerically. The characteristics of wave phase velocity, attenuation and the effect of thermal expansion, initial temperature and porosity, etc., on phase velocities of $P_{1}$ -, $P_{2}$ -, and $T$ -wave are discussed. As a reference, the characteristics of the propagation of elastic waves in fluid–saturated soil are also studied. The computation results show that (1) the phase velocity of $P_{1}$ -wave obtained by the theory of thermoporoelascity (THM) is faster than that by the theory of poroelasticity (HM); (2) the attenuation of $P_{1}$ -wave obtained by either the theory of THM or HM are consistent; (3) the dissemination characteristics of $P_{2}$ -wave are almost consistent; (4) the phase velocity of $T$ -wave is the slowest among the three compressional waves; and (5) The attenuation versus frequency characteristic of $T$ -wave is similar to that of $P_{2}$ -wave.     

Numerical Investigation of the Time Scales of Single Droplet Burning

The effect of gas phase velocity fluctuations on single droplet burning is investigated numerically. The main objective of this study is to understand the effect of gas phase turbulence on nitric oxide formation in single droplet flames. Since the interaction of gas phase velocity fluctuations with droplet burning is of sequential character, a separate investigation of droplet momentum coupling and droplet burning is performed. Momentum coupling controls droplet relaxation against changes of the gas phase velocity along the droplet trajectory and, thereby, determines to what extend gas phase velocity fluctuations translate into droplet slip velocity fluctuations. This coupling effect acts as a high pass filter with a cutoff frequency determined by the droplet Reynolds number and diameter. In the simulation of single droplet burning detailed models for chemical reaction, diffusive species transport and evaporation are used. A significant effect of slip velocity fluctuations on the mean values of NO formation rate is observed. The effect of slip velocity fluctuations on the mean NO formation rate is frequency dependent. The frequency response of the droplet flame is similar to that of a low pass filter. The droplet flame time scale characterizing the response to slip velocity fluctuations is found to correlate with chemical time scales. This time scale is not affected by droplet diameter.