Conformational Stability, Raman and Infrared Spectra, Vibrational Assignment, and Ab Initio Calculations of Allyltrifluorosilane

The Raman spectra (3500 to 30 cm^–1) of allyltrifluorosilane, CH₂CHCH₂SiF₃, in the liquid with quantitative depolarization ratios and solid states, and the infrared spectra (3500 to 30 cm^–1) of the gas and solid have been recorded. Additionally, the mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (–100° to –55°C) have been recorded. All of these data indicate there are two conformers, the more stable gauche rotamer and a very small amount of the cis conformer in the fluid states, but only the gauche form remains in the polycrystalline solid. The variable temperature studies of the infrared spectrum of the xenon solution indicate a relatively large enthalpy difference of 354±30 cm^–1 (4.23±0.36 kJ/mol) between the conformers. The fundamental frequencies for the asymmetric (54 cm^–1) and SiF₃ (48 cm^–1) torsions for the gauche conformer were observed in the far infrared spectrum, and from the SiF₃ torsional frequency the barrier to internal rotation is calculated to have a value of 525 cm^–1 (6.28 kJ/mol). A complete vibrational assignment is presented for the gauche conformer that is consistent with the predicted wavenumbers utilizing the force constants from ab initio MP2/6-31G* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational wavenumbers have been obtained from RHF/6-31G* and/or MP2/6-31G* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with corresponding results for some similar molecules.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

Spectra and Structure of Silicon-Containing Compounds. XXV. Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,and Ab Initio Calculations of Ethyl Chlorosilane-Si-d2

The infrared (3200 to 400 cm^–1) spectra of gaseous and solid and Raman (3200 to 20 cm^–1) spectra of liquid and solid ethyl chlorosilane-Si-d₂, CH₃CH₂SiD₂Cl, have been recorded. Both the gauche and trans conformers have been identified in the fluid phases, but only the gauche conformer remains in the solid phase. Variable temperature (–105 to –150°C) studies of the infrared spectra of CH₃CH₂SiH₂Cl dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 78±11 cm^–1 (0.93±0.13 kJ/mol), with the gauche conformer the more stable form. Utilizing the frequencies of the silicon-hydrogen stretches, from the chlorosilane-Si-d isotopomer, Si—H bond distances of 1.481 and 1.480 Å have been obtained for the gauche conformer and 1.481 Å for the trans conformer. Complete vibrational assignments are proposed for both isotopomers which are consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities and the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31(d), 6-311++G(d,p), and 6-311+G(2d,2p) basis sets with full electron correlation by the Moller–Plesset (MP) perturbation method to second order. Continuing the previously reported rotational constants from five different isotopomers and the ab initio predicted structural parameters, adjusted r ₀ parameters have been calculated, which are compared to the corresponding r _s parameters. The results are discussed and the theoretical values are compared to the experimental values when appropriate.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

Vibrational Spectra, Assignment, Conformational Stability and Ab Initio/DFT Calculations for 1-Nitropropane

The infrared spectra (4000–400 cm^{– 1}) of solid and the Raman spectra (3500–30 cm^{– 1}) of liquid and solid 1-nitropropane, CH₃CH₂CH₂NO₂, have been registered. Both the trans and gauche conformers have been identified in the fluid phase, while the trans form remains in the stable solid. Temperature dependence (190–230K) of the liquid 1-nitropropane Raman spectra has been carried out. From these data, the enthalpy difference was determined to be 870 ± 105 J-mol^–1, with the gauche conformer being the more stable rotamer. Ab initio and DFT calculations at different levels of approximation (HF, MP2, B3LYP, B3PW91) gave optimized geometries, harmonic force fields, and vibrational frequencies for the trans and gauche conformers. All the calculations (except the B3PW91/6-31G* level) predicted gauche as the low-energy conformer. Theoretical force constants are analyzed for formulating constraints in the molecular force field model of 1-nitropropane.     

Spectra and Structures of Silicon-Containing Compounds. XXIV.* Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,Barriers to Internal Rotation,and Ab Initio Calculations of Ethylsilane

The infrared (3200 to 400 cm^–1) and Raman (3200 to 20 cm^–1) spectra of gaseous and solid ethylsilane, CH₃CH₂SiH₃, have been recorded. Additionally, the Raman spectrum of the liquid has been obtained with quantitative depolarization values. The SiH₃ torsional mode has been observed as sum and difference bands with the silicon-hydrogen stretching vibration. Utilizing the torsional fundamental frequency of 132 cm^–1 the threefold periodic barrier of 590 cm^–1 (7.06 kJ/mol) has been obtained. Utilizing the frequencies of the silicon-hydrogen stretches, Si-H bond distances of 1.485 and 1.484 Å have been obtained for the bonds gauche and trans to the methyl group, respectively. Using previously reported rotational constants from seven different isotopomers, the r ₀ parameters have been calculated and are compared to the corresponding r _s parameters. A complete vibrational assignment is proposed that is consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities as well as the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31G(d), 6-311 + G(d,p), and 6-311+G(2d,2p) basis sets at levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. The results are discussed and the theoretical values are compared to the experimental values when appropriate.     

Conformational Studies of Methyl Vinyl Silane from Temperature-Dependent FT–IR Spectra of Xenon and Krypton Solutions

Variable-temperature (–55 to –155°C) studies of the infrared spectra (3500–400 cm^–1) of methyl vinyl silane, CH₂CHSiH₂CH₃, dissolved in liquid xenon and krypton have been recorded. Utilizing three sets of conformer doublets due to the cis and gauche rotamers, the enthalpy difference has been determined to be 133 ± 11 cm^–1 (1.59 ± 0.13 kJ/mol) with the gauche conformer the more stable form in the krypton solution. In the xenon solution, the enthalpy difference could not be determined because the infrared bands become so broad and the overlap was so extensive that meaningful areas could not be determined. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G(2d,2p) from which structural parameters and conformational stabilities have been determined. With the largest basis set, the cis conformer is predicted to be the more stable conformer, which is inconsistent with the experimental results. Utilizing previously reported microwave rotational constants for both conformers along with the ab initio predicted distances and angles, r ₀ parameters have been obtained for both the cis and gauche conformers. The spectroscopic and theoretical results are compared to the corresponding quantities for some similar molecules.     

Raman and Infrared Spectra, Ab Initio Calculations, Normal Coordinate Analysis, and Conformational Stability of 2-Methoxypropene

The Raman (3500–40 cm^–1) and infrared (3500–70 cm^–1) spectra of gaseous and solid 2-methoxypropene, CH₃O(CH₃)C=CH₂, and the isotopomers, CD₃O(CH₃)C=CH₂ and CH₃O(CD₃)C=CD₂ have been recorded. In addition, the Raman spectra of the liquids have been recorded with qualitative depolarization measurements. All of these data indicate that only one conformer is present in the fluid phases at ambient temperature and this form is the cis conformer, which remains in the solid. Assignments are provided for the fundamentals of all three isotopomers for the cis conformer with C_s symmetry. The far-infrared spectra of all three isotopic species have been recorded at a resolution of 0.1 cm^–1 in the gas and 1.0 cm^–1 in the solid. The parameters of the potential function governing the asymmetric torsion are determined to be V₃ = 1485 ± 9 cm^–1 and V₆ = –55 ± 4 cm^–1 for the d₀ compound, where only two terms were determined, since a second conformer was not evident. The barrier to internal rotation for the methyl group attached to the oxygen atom is 1370 ± 8 cm^–1 and the C—CH₃ barrier is 772 ± 5 cm^–1. Ab initio calculations with full electron correlation have been carried out by the perturbation method to second order to obtain the equilibrium structural parameters, harmonic force constants, fundamental frequencies, infrared intensities, Raman activities, depolarization values, and conformational stability. The predicted values have been compared to the experimental values where appropriate.     

Spectra and structure of silicon containing compounds

The Raman (50 to 3200 cm^–1) and infrared (50 to 3500 cm^–1) spectra of chlorodimethylmethoxysilane, Cl(CH₃)₂SiOCH₃, in the vapor and solid phases have been recorded. Raman spectra of the liquid including depolarization ratios have also been recorded. Optimized geometries and conformational stabilities have been obtained from ab initio calculations utilizing the RHF/3–21G* and RHF/6–31G* basis sets. The calculations from both of these basis sets indicated the gauche conformer to be significantly more stable than the trans conformer. Since the gauche has twice the multiplicity of the trans form it is unlikely that the trans conformer will be detected in the fluid phases at room temperature. This is supported by the fact that no infrared or Raman bands were found to vanish in the spectra of the crystalline solid. The vibrational frequencies have been calculated using appropriate scaling factors, and the vibrational spectra are interpreted in detail. The results have been compared with those obtained for some related molecules.Dedicated to Professor Dr. H. Kriegsmann on the occasion of his 70th birthdayFor part XX, see J Raman Spectrosc 26:in press (1995)Analytical R/D Department, Organic Products Division, Miles Inc., Bushy Park Plant. Charleston, SC 9411, USAChemistry Department, Mu'tah University, P.O.Box 7, Mu'tah-Karak, JordanDepartment of Chemistry, Moscow State University, Moscow, B-234, RussiaDepartment of Ceramic Engineering, Inha University, Nam-Ku, Incheon 160, KoreaDepartment of Chemistry, University of Oslo, P.O.Box 1033, 0315 Oslo, Norway     

Conformational Stability of Chloromethyl Silyl Chloride from Temperature-Dependent FT-IR Spectra of Krypton Solutions

The Raman spectra (3200–30 cm^–1) of liquid and solid, and infrared spectra of gaseous and solid chloromethyl silyl chloride, ClCH₂SiH₂Cl, have been recorded. Variable temperature (–105––150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference is 177 ± 35 cm^–1 (2.12 ± 0.42 kJ/mol), with the more stable form being the trans conformer, which is consistent with the prediction from ab initio calculations at both the Hartree–Fock level and with electron correlation by the perturbation method to second order. It is estimated that 56% of the sample is in the trans form at ambient temperature. A complete vibrational assignment is proposed for both the trans and gauche conformers based on infrared band contours, relative intensities, depolarization values, and group frequencies, which is supported by normal coordinate calculations utilizing the force constants from the ab initio MP2/6-31G(d) calculations. The optimized geometries have also been obtained from ab initio calculations utilizing several different basis sets with full electron correlation by the perturbation method up to MP2/6-311+G(2d,2p). The results are discussed and compared to some corresponding results for several related molecules.     

Conformational and Structural Studies of 1-Fluoropropane from Temperature Dependant FT-IR Spectra of Rare Gas Solutions and Ab Initio Calculations

Variable temperature (–55 to –150°C) studies of the infrared spectra (3500 to 400 cm^–1) of 1-fluoropropane, CH₃CH₂CH₂F, dissolved in liquid krypton and xenon have been recorded. Utilizing three conformer pairs in the krypton solution and four conformer pairs in the xenon solution, enthalpy differences of 104±6 cm^–1 (1.24±0.07 kJ/mol) and 99±5 cm^–1 (1.16±0.06 kJ/mol) were obtained from the krypton and xenon solutions, respectively, with the gauche form the more stable conformer. From these data it is estimated that 24% of the trans forms is present at ambient temperature. The conformational stabilities, harmonic force constants, fundamental frequencies, infrared intensities and Raman activities have been obtained from RHF/6-31G(d) and/or MP2/6-31G(d) ab initio calculations and these quantities have been compared to the experimental values when appropriate. The optimized geometries have also been obtained with several different ab initio basis sets up to MP2/6-311+G(2d,2p). The r₀ structural parameters have been obtained by combining the ab initio data with the previously reported rotational constants for both conformers. The results are compared to the corresponding results for some similar molecules.     

Infrared and Raman Spectra,Conformational Stability,Ab Initio Calculations,and Vibrational Assignments for Cyclopropyldifluorosilane

The infrared (3200–30 cm^–1) spectra of gaseous and solid Cyclopropyldifluorosilane, c-C₃H₅SiF₂H, and the Raman spectra (3200–20 cm^–1) of the liquid with quantitative depolarization values and the solid have been recorded. Both the syn (cis) and skew (gauche) conformers have been identified in the fluid phases, but only the syn conformer remains in the solid. Variable temperature (–55 to –100°C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 73 ± 10 cm^–1 (209 ± 29 cal mol^–1), with the syn conformer being the more stable rotamer, which is at variance with the predictions from ab initio calculations. A complete vibrational assignment is proposed for both conformers based on infared band contours, relative intensities, depolarization values, and group frequencies. The vibrational assignments are supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G* calculations. Utilizing the frequencies of the silicon–hydrogen sketch, the rm Si—H bond distances of 1.474 and 1.472 Å have been obtained for the syn and skew conformers, respectively. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing the 6-31G* and 6-311 +G** basis sets at levels of restricted Hartree-Fock (RHF) and/or Moller–Plesset (MP) to second order. The potential energy terms for the conformer interconversion have been obtained from the MP2/6-31G* calculation. The results are discussed and compared to those obtained for some similar molecules.     

Far-Infrared Spectra, Conformational Stability, Barriers to Internal Rotation, Ab Initio Calculations, r0 Structural Parameters, and Vibrational Assignment of Ethyl Methyl Ether

The far-infrared spectra (350–35 cm^–1) of gaseous ethyl methyl ether-d ₀ and ethyl methyl-d ₃-ether have been recorded at a resolution of 0.10 cm^–1. For the d ₀ species, the fundamental asymmetric torsion of the more stable trans conformer (two methyl moieties are trans to one another) has been observed at 115.40 cm^–1 with four upper state transitions falling to lower frequency, whereas, for the gauche form, it has been observed at 93.56 cm^–1 with two excited states falling to lower frequency. the corresponding series for the d ₃ species start from 106.00 and 87.10 cm^–1, respectively. From these data, the asymmetric torsional potential coefficients for the d ₀ species have been determined to be: V ₁ = 572 ± 30; V ₂ = 85 ± 8; V ₃ = 619 ± 30; V ₄ = 175 ± 18, and V ₆ = –28 ± 3 cm^–1. The trans to gauche and gauche to gauche barriers were calculated to be 958 cm^–1 (11.5 kJ/mol) and 631 cm^–1 (7.55 kJ/mol), respectively, with an energy difference of 550 ± 6 cm^–1 (6.58 ± 0.07 kJ/mol). Utilizing three conformer pairs, variable temperature studies (–105 to –150°C) of the infrared spectra of the d ₀ sample dissolved in liquid krypton gave an enthalpy difference of 547 ± 28 cm^–1 (6.54 ± 0.33 kJ/mol) with the trans conformer the more stable rotamer. It is estimated that there is only 4% of the gauche conformer present at ambient temperatures. The structural parameters, conformational stabilities, barriers to internal rotation, and fundamental vibrational frequencies, which have been determined experimentally, are compared to those obtained from ab initio gradient predictions from RHF/6-31G* and with full electron correlation at the MP2 level with three different basis sets. The adjusted r ₀ structural parameters have been obtained for the trans conformer from combined ab initio MP2/6-311+G** predictions and previously reported microwave rotational constants. The reported distances should be accurate to 0.003 Å and the angles to 0.5°. These results are compared to the corresponding quantities obtained for some similar molecules.     

Infrared and Raman spectra, conformational stability, ab initio calculations and vibrational assignment for 1,2-pentadiene (ethyl allene)

The infrared (3500-50 cm⁻¹) and Raman (3500-20 cm⁻¹) spectra of 1,2-pentadiene, H₂C=C=C(H)CH₂CH₃ (ethyl allene), have been recorded for both the gaseous and solid states. Additionally, the Raman spectrum of the liquid has been obtained with qualitative depolarization values. In the fluid phases both the cis and gauche conformers have been identified, with the gauche rotamer being the predominant form although it may not be the conformer of lowest energy. In the solid state only the cis conformer remains after repeated annealing of the crystal. The asymmetric torsion of the cis conformer is observed as a series of Q-branch transitions beginning at 103.4 cm⁻¹ and falling to lower frequency. An estimate of the potential function governing conformer interconversion is provided. A complete assignment of the normal modes for the cis conformer is given and several of the fundamentals are assigned for the gauche rotamer. Ab initio electronic structure calculations of energies, conformational geometries, vibrational frequencies, and potential energy functions have been made to complement and assist the interpretation of the infrared and Raman spectra. In particular, the transitions among torsional energy levels for both the symmetric (methyl) and asymmetric (ethyl) motions have been calculated. The results are compared to the corresponding quantities for some similar molecules.     

Infrared and Raman spectra, conformational stability, normal coordinate analysis, ab initio calculations, and vibrational assignment of 1-fluoro-1-methylsilacyclobutane

The infrared (3500–40 cm⁻¹) spectra of gaseous and solid 1-fluoro-1-methylsilacyclobutane, c-C₃H₆SiF(CH₃), have been recorded. Additionally, the Raman spectrum (3500–30 cm⁻¹) of the liquid has been recorded and quantitative depolarization values have been obtained. Both the axial and equatorial (with respect to the methyl group) conformers have been identified in the fluid phases. Variable temperature (−55–−100°C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 267±10 cm⁻¹ (3.19±0.12 kJ mol⁻¹), with the axial conformer being the more stable form and the only conformer remaining in the polycrystalline solid. A complete vibrational assignment is proposed for the axial conformer and many of the fundamentals for the equatorial conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing the 6-31G* and 6-311++G** basis sets at the levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. The results are discussed and compared to those obtained for some similar molecules.     

Conformational Stability of Propenoyl Bromide from Temperature-Dependent Infrared Spectra of Krypton Solutions,Ab Initio Calculations,and r 0 Structural Parameters of the Propenoyl Halides (F,Cl, Br)

Variable temperature (–100 to –150°C) studies of the infrared spectra (3500–400 cm^–1) of propenoyl bromide, CH₂=CHCBrO, dissolved in liquid krypton, have been carried out. Utilizing six different conformer pairs, an enthalpy difference of 204 ± 20 cm^–1 (2.44 ± 0.24 kJ/mol) was obtained, with the anti conformer (carbonyl bond trans to C=C bond) the more stable form. At ambient temperature, there is approximately 28 ± 2% of the syn conformer present. The anti conformer also remains in the infrared and Raman spectra of the polycrystalline solid. The optimal geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies, are reported for both conformers from MP2/6-31G(d) ab initio calculations. The potential function governing the conformational interchange has been obtained from the MP2/6-31G(d) ab initio calculations. The conformational stabilities were calculated from a variety of basis sets and at the highest level of calculations, MP2/6-311 + (2df,2pd), the anti conformer is predicted to be more stable by 178 cm^–1, which is in excellent agreement with the experimental results. The r ₀ adjusted structural parameters have been obtained for propenoyl fluoride and chloride from a combination of the previously reported microwave rotational constants and ab initio predicted parameters. Several of the parameters for the chloride are significantly different than those proposed from an electron diffraction investigation. The results of these spectroscopic, structural, and theoretical studies are discussed and compared to the corresponding results for some similar molecules.     

Conformational Stability from Variable-Temperature Infrared Spectra of Krypton Solutions, Ab Initio Calculations, and r o Structural Parameters of Chlorocyclopentane

The infrared spectra (3500–400 cm^–1) of krypton solutions of chlorocyclopentane, c-C₅H₉Cl, at variable temperatures (–101 to –150°C) have been recorded and the fundamental vibrations of the axial conformer and several of those for the equatorial form have been assigned. Utilizing two pairs of fundamentals for the two conformers in the krypton solution, an enthalpy difference of 145±15 cm^–1 (1.73±0.18 kJ-mol^–1) has been obtained with the axial conformer the more stable form. It is estimated that there is 67±2% of the axial conformer present at ambient temperature. Convincing spectroscopic evidence shows that a significant percentage of the chlorocyclopentane molecules are undergoing pseudorotation at ambient temperature. The conformational stabilities, harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation and these quantities have been compared to the experimental values when appropriate. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2 calculations as well as by density functional theory (DFT) by the B3LYP method with several different basis sets. The adjusted r ₀ structural parameters have been obtained for both conformers by combining the ab initio data with the previously reported microwave rotational constants. These new values of the structural parameters for both conformers are compared to those previously reported from electron diffraction and microwave studies. These results are compared to the corresponding quantities of some similar molecules.     

Vibrational spectra,conformational stability,barriers to internal rotation,r0 structural parameters and ab initio calculations of fluoromethyl methyl ether

The far-infrared spectrum of gaseous fluoromethyl methyl ether, FCH₂OCH₃, along with three of the deuterium isotopes, has been recorded at a resolution of 0.10 cm^–1 in the 350 to 50 cm^–1 region. The fundamental asymmetric torsional and methyl torsional modes are extensively mixed and have been observed at 182 and 132 cm^–1, respectively, for the stablegauche conformer with the lower frequency band having several excited states falling to lower frequency. An estimate is given for the potential function governing the asymmetric rotation. On the basis of a one-dimensional model the barrier to internal rotation of the methyl moiety is determined to be 527±9 cm^–1 (1.51±0.03 kcal/mol). A complete assignment of the vibrational fundamentals for all four isotopic species observed from the infrared (3500 to 50 cm^–1) spectra of the gas and solid and from the Raman (3200 to 10 cm^–1) spectra of the gas, liquid, and solid is proposed. No evidence could be found in any of the spectra for the high-energytrans conformer. All of these data are compared to the corresponding quantities obtained from ab initio Hartree-Fock gradient calculations employing the 3-21G and 6-31G* basis sets along with the 6-31G* basis set with electron correlation at the MP2 level. Additionally, completer ₀ geometries have been determined from the previously reported microwave data and carbon-hydrogen distances determined from infrared studies. The heavy-atom structural parameters (distances in Å, angles in degrees) arer(C₁-F) = 1.395 ± 0.005;r(C₁-O) = 1.368 ± 0.007;r(C₂-O) = 1.426 ±0.003; FC₁O = 111.33 ± 0.25; C₁OC₂ = 113.50 ± 0.18 and dih FC₁OC₂ = 69.12 ± 0.26. All of these results are discussed and compared with the corresponding quantities obtained for some similar molecules.     

Far-infrared spectrum,conformational stability,barriers to internal rotation,normal coordinate calculations,and vibrational assignment for chloroacetaldehyde

The far infrared spectrum [350 to 25 cm^–1] of gaseous chloroacetaldehyde, ClCH₂CHO, has been recorded at a resolution of 0.10 cm^–1. The first excited-state transition of the asymmetric torsion of the more stable near s-cis [chlorine atom s-cis to the aldehyde hydrogen atom] conformer has been observed at 26.9 cm^–1, with seven additional upper state transitions falling to higher frequency. Additionally, the fundamental torsional transition of the s-trans conformer has been observed at 58.9 cm^–1 with two excited states also falling to higher frequency. From these data, the asymmetric torsional potential coefficients have been determined to be:V ₁=414±11;V ₂ = 191±3;V ₃=–203±5;V ₄=44±1 andV ₆=–26±1 cm^–1. The s-cis to s-trans barrier is 500±5 cm^–1 (1.43±0.01 kcal mol^–1) with the s-cis conformer being more stable by 267±19 cm^–1 (0.76±0.05 kcal mol^–1) than the s-trans form. The Raman [4000 to 100 cm^–1] and infrared (4000 to 400 cm^–1] spectra of the gas have been recorded. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values obtained. Complete vibrational assignments are proposed for both conformers based on band contours, depolarization values, and group frequencies. The assignments are supported by ab initio Hartree-Fock gradient calculations employing the 3–21G^* basis set to obtain the frequencies and the potential energy distributions for the normal vibrations for both rotamers. Additional ab initio calculations at the MP4/6-31G^* level have been carried out to determine the structural parameters for both conformers. The results are discussed and compared with the corresponding quantities obtained for some similar molecules.This contribution taken in part from the thesis of C. L. Tolley which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree.     

Raman and infrared spectra, conformational stability, barriers to internal rotation, vibrational assignment, and ab initio calculations of 3-methyl-3-butenenitrile

The Raman (3500-30 cm⁻¹) spectra of liquid and solid and the infrared (3500-40 cm⁻¹) spectra of gaseous and solid 3-methyl-3-butenenitrile, CH₂C(CH₃)CH₂CN, have been recorded. Both cis and gauche conformers have been identified in the fluid phases but only the cis form remains in the solid. Variable temperature (−55 to −100 °C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 163±16 cm⁻¹ (1.20±0.19 kJ mol⁻¹), with the cis conformer the more stable rotamer. It is estimated that there is 48±2% of the gauche conformer present at  25°C. A complete vibrational assignment is proposed for the cis conformer based on infrared band contours, relative intensities, depolarization ratios and group frequencies. Several of the fundamentals for the gauche conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been obtained for both rotamers by ab initio calculations employing the 6-31G(d), 6-311G(d,p), 6-311+G(d,p) and 6-311+G(2d,2p) basis sets at the levels of restricted Hartree-Fock (HF) and/or Møller-Plesset perturbation theory to the second order (MP2). Only with the 6-311G(2d,2p) and 6-311G(2df,2pd) basis sets with or without diffuse functions is the cis conformer predicted to be more stable than the gauche form. The potential energy terms for the conformational interchange have been obtained at the MP2(full)/6-311+G(2d,2p) level, and compared to those obtained from the experimental data. The results are discussed and compared to the corresponding quantities obtained for some similar molecules.     

Spectra and structure of organophosphorus compounds—XXXVII. Infrared and Raman spectra,conformational stability,vibrational assignment and normal coordinate analysis of ethyldichlorophosphine-d0 and -d5

The infrared (3500 to 40 cm⁻¹) and Raman (3500 to 10 cm⁻¹) spectra have been recorded for the gaseous and solid phases of ethyldichlorophosphine, CH₃CH₂PCl₂, and CD₃CD₂PCl₂. Additionally, the Raman spectra of the liquids were recorded and qualitative depolarization values were obtained. In the spectrum of the gas the gauche conformer is predominant with about 65% abundance whereas in the spectrum of the liquid at ambient temperature the amount of gauche conformer is reduced compared to the gas phase and at −100°C the trans conformer predominates. The trans conformer is the more stable species in the solid. A variable temperature study was carried out on the Raman spectrum of the liquid and ΔH and ΔS values of 190 ± 30 cm⁻¹ (543 ± 87 cal/mol) and 2.86 ± 0.3 eu were determined, respectively, with the trans conformer being more stable. Similar variable temperature studies have been carried out on a number of conformer peaks in the infrared spectrum of the gas and a ΔH value of 53 ± 38 cm⁻¹ (152 ± 110 cal/mol) was obtained, again with the trans conformer being more stable. All the fundamental modes of both conformers have been assigned utilizing band contours, depolarization values, isotopic shift factors and group frequencies. A normal coordinate calculation has been carried out utilizing a modified valence force field to calculate the frequencies and potential energy distribution for both conformers. The barriers to methyl rotation of the trans and gauche conformers are 2.2 ± 0.1 and 2.3 ± 0.1 kcal/mol, respectively. These results are compared to similar quantities for some corresponding molecules.     

Raman and infrared spectra,conformational stability,barriers to internal rotation,r 0 structural parameters,ab initio calculations,and vibrational assignment for vinyl chloroformate

The Raman (3200 to 10 cm^–1) and infrared (3500 to 50 cm^–1) spectra of vinyl chloroformate, H₂C=CHOC(O)Cl, have been recorded for both the gas and solid. Additionally, the Raman spectrum of the liquid has been recorded, and depolarization ratios have been obtained. These data have been interpreted on the basis that the only stable conformation present at ambient temperature is thetrans-trans rotamer, where the firsttrans refers to the vinyl moiety relative to the O—CCl bond and the second to the C—Cl bond relative to the=C—O bond. Using harmonic rigid asymmetric top calculations, the infrared vapor phase contours for the C=O and the C=C stretch were predicted for thetrans-trans and for thecis-trans conformer, and were compared with experiment. For both fundamentals thetrans-trans hybrid reproduces the experimental contour, whereas thecis-trans contours fail to do so for both fundamentals. From far-infrared spectrum of the vapor obtained at 0.1 cm^–1 resolution, the C(O)Cl andO-vinyl torsional fundamentals have been observed at 132 and 61 cm^–1, respectively. Ther ₀ structural parameters have been obtained from a combination of ab initio calculated parameters with appropriate offset values and the fit of the microwave rotational constants for the two naturally occurring chlorine isotopes. The structure, barrier to internal rotation, and vibrational frequencies have been determined from ab initio Hartree-Fock gradient calculations, using the 3-21G^* and 6-31G^* basis sets. These results are compared to those obtained experimentally and to similar quantities for some related molecules.