Alternating copolymer of butadiene and propylene. IV. Studies on the catalysts for alternating copolymerization

The catalysts for alternating copolymerization of butadiene and propylene were investigated by means of ESR technique and potentiometric titration. It was found that several kinds of active species for the production of alternating copolymer, 1,2-polybutadiene, and trans-1,4-polybutadiene are formed, depending upon the catalyst composition of VO(acac)₂? Et₃Al? Et₂AlCl. ESR and potential titration studies suggest that the active species for alternating copolymerization is a divalent vanadium compound existing in an associated form.     

Kinetic study of the alternating copolymerization of butadiene and methyl methacrylate

A kinetic investigation of the alternating copolymerization of butadiene and methyl methacrylate with the use of a system of ethylaluminum dichloride and vanadyl chloride as a catalyst was undertaken. The relation between the polymer yield and the molar fraction of methyl methacrylate in the feed was examined by continuous variation of butadiene and methyl methacrylate, the concentrations of total monomer, ethylaluminum dichloride, and vanadyl chloride being kept constant. This continuous variation method revealed that the polymer yield attains its maximum value with a monomer feed containing less than the 0.5 molar fraction of methyl methacrylate. This value of the molar fraction of methyl methacrylate affording the maximum polymer yield decreased on increasing the total monomer concentration but was not changed on varying the concentration of ethylaluminum dichloride. The number of active species estimated from the relation between yield and molecular weight of the polymer was almost constant, regardless of the molar fraction of methyl methacrylate in the feed. Consequently, it can be said that the maximum polymer yield depends mainly on the propagation reaction, not on the initiation reaction or the termination reaction. Three types of the mechanism have been discussed for this alternating copolymerization: polymerization via alternating addition of butadiene and methyl methacrylate complexed with ethylaluminum dichloride by the Lewis-Mayo scheme; polymerization via the ternary intermediate of butadiene, methyl methacrylate, and ethylaluminum dichloride; polymerization via the complex formation of butadiene and methyl methacrylate complexed with ethylaluminum dichloride occurring only at the growing polymer radical. From the kinetic results obtained, it was shown that the first and third schemes are excluded, and polymerization by way of the ternary intermediate is compatible with the data.     

Homo- and copolymerization of butadiene and styrene with neodymium tricarboxylate catalysts

Homo- and copolymerizations of butadiene (BD) and styrene (St) with rare-earth metal catalysts, including the most active neodymium (Nd)-based catalysts, have been examined, and the cis-1,4 polymerization mechanism was investigated by the diad analysis of copolymers. Polymerization activity of BD was markedly affected not only by the ligands of the catalysts but also by the central rare-earth metals, whereas that of St was mainly affected by the ligands. In the series of Nd-based catalysts [Nd(OCOR)₃:R = CF₃, CCl₃, CHCl₂, CH₂Cl, CH₃], Nd(OCOCCl₃)₃ gave a maximum polymerization activity of BD, which decreased with increasing or decreasing the pKa value of the ligands. This tendency was different from that for Gd(OCOR)₃ catalysts, where the CF₃ derivative led to the highest polymerization activity of BD. For the polymerization of St and its copolymerization with BD, the maximum activities were attained at R = CCl₃ for both Nd- and Gd-based catalysts. The copolymerization of BD and St with Nd(OCOCCl₃)₃ catalyst was also carried out at various monomer feed ratios, to evaluate the monomer reactivity ratios as r_BD = 5.66 and r_St = 0.86. The cis-1,4 content in BD unit decreased with increasing St content in copolymers. From the diad analysis of copolymers, it was indicated that Nd(OCOCCl₃)₃ catalyst controls the cis-1,4 structure of the BD unit by a back-biting coordination of the penultimate BD unit. Furthermore, the long range coordination of polymer chain by the neodymium catalyst was suggested to assist the cis-1,4 polymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 241–247, 1998     

Ruthenium phosphine complexes as catalysts of alternating copolymerization of ethylene and carbon monoxide

The properties of the ruthenium (II) phosphine complexes [Ru(dppe)₂(OTs)₂] and [Ru{PhP(CH₂CH₂CH₂PPh₂)₂}(OTs)₂] as catalysts of alternating copolymerization of ethylene and carbon monoxide were studied. The catalytic activity of these complexes in the absence of cocatalysis is low, but it is substantially increased in the presence of trifluoroacetic acid or 1,4-benzoquinone. These compounds are the first ruthenium complexes which catalyze copolymerization of ethylene and CO. Translated fromAkademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1119–1121, June, 2000.     

Organometallic salts as phase transfer catalysts

Six organometallic compounds were tested to see if they could behave as phase transfer catalysts. All of the compounds appeared to catalyze the base hydrolysis of p-nitrophenylacetate in a 2 layer aqueous-organic system.     

Metal salen derivatives as catalysts for the alternating copolymerization of oxetanes and carbon dioxide to afford polycarbonates

Metal salen derivatives of chromium and aluminum, along with n-Bu4NX (X = Cl or N3) salts, have been shown to be effective catalysts for the selective coupling of CO2 and oxetane (trimethylene oxide) to provide the corresponding polycarbonate with only trace quantities of ether linkages. The formation of copolymer is suggested, based on circumstantial evidence, not to proceed via the intermediacy of trimethylene carbonate, which was observed as a minor product of the coupling reaction. For a reaction catalyzed by (salen)CrCl in the presence of n-Bu4NN3 as the cocatalyst, both matrix-assisted laser desorption ionization time-of-flight mass spectrometry and infrared spectroscopy revealed an azide end group in the copolymer.     

High-activity,single-site catalysts for the alternating copolymerization of CO2 and propylene oxide

Despite recent advances regarding catalysts for CO2/epoxide copolymerization, the development of high-activity catalysts for alternating polymerization of CO2 and commodity epoxides, such as propylene oxide, remains a challenge. A new class of unsymmetrically substituted beta-diiminate zinc complexes is reported that exhibits unprecedented activity for CO2/propylene oxide copolymerization. The polymers formed are of high molecular weight (Mn approximately 35 kg/mol) and have narrow polydispersities (PDI approximately 1.1), consistent with a living polymerization.     

Alternating copolymerization of isoprene and butadiene with acrylonitrile

Copolymerizations of acrylonitrile and isoprene or butadiene were carried out in the presence of a new catalytic system containing Cr(O-tert-Bu)₄ and AlEtCl₂. It was found that the copolymer compositions have a highly alternating structure, even with varying feed ratios of monomer. The nuclear magnetic resonance spectra of the copolymers obtained with this catalytic system were observed and are discussed in terms of the alternation.     

Organometallic gold(III) compounds as catalysts for the addition of water and methanol to terminal alkynes

Different inorganic and organometallic gold(III) and gold(I) complexes have been tested in the addition of water and methanol to terminal alkynes. Anionic and neutral organometallic gold(III) compounds can efficiently mediate these reactions in neutral media in refluxing methanol. The compounds are added in catalytic amounts (1.6-4.5 mol % with respect to the alkyne). Thus, compounds of the general formula Q[AuRCl(3)], Q[AuR(2)Cl(2)], [AuRCl(2)](2), and [AuR(2)Cl](2) (Q = BzPPh(3)(+), PPN: N(PPh(3))(2)(+) or N(Bu)(4)(+); R = C(6)F(5) or 2,4,6-(CH(3))(3)C(6)H(2)) seem to behave as Lewis acids in nucleophilic additions to triple bonds. Some intermediates could be detected in the stoichiometric reaction between [Au(C(6)F(5))(2)Cl](2) and phenylacetylene that was followed by variable temperature (1)H, (19)F[(1)H], COSY (19)F[(1)H]-(19)F[(1)H], and (2)H[(1)H] NMR experiments. Compound [Au(C(6)F(5))(2)Cl](2) is also able to catalyze the hydration of phenylacetylene at room temperature. A plausible mechanism for the hydration reaction has been proposed.     

Polar,non-coordinating ionic liquids as solvents for the alternating copolymerization of styrene and CO catalyzed by cationic palladium catalysts

The palladium-catalyzed copolymerization of styrene and CO in an ionic liquid solvent, 1-hexylpyridinium bis(trifluoromethanesulfonyl)imide, gave improved yields and increased molecular weights compared to polymerizations run in methanol.     

Trans-stereospecific polymerization of butadiene and random copolymerization with styrene using borohydrido neodymium/magnesium dialkyl catalysts

The combination of a neodymium borohydride, Nd(BH₄)₃(THF)₃ (1) or Cp^*Nd(BH₄)₂(THF)_x (2), with MgⁿBuEt (BEM), affords an efficient and highly selective (up to 96.7% 1,4-trans) catalyst for butadiene polymerization. In the presence of excesses of Mg co-catalyst, polymer chain transfer takes place between neodymium and magnesium, and significant amounts of 1,2-units are observed. When considered for butadiene-styrene statistical copolymerization, the catalytic system based on 2 showed a good ability to produce poly[(1,4-trans-butadiene)-co-styrene)], with strong impact of the Mg/Nd ratio on the yield and on the copolymer microstructure, including the percentage of inserted styrene (up to 16.9 mol%). Whatever the co-monomers concentration the polybutadiene backbone remained 1,4-trans. The precise microstructure of the polymers and copolymers was thoroughly analyzed by means of high resolution NMR spectroscopy (900 MHz) and MALDI-ToF spectrometry.     

Some aspects of anionic butadiene copolymerization

The relationship between ideal copolymerization behavior and the nature of reactive species in butyllithium (n-BuLi) initiated anionic copolymerization of styrene (St)- butadiene (Bd) in nonpolar solvent has been discussed. The monomer reactivity ratios (m.r.r.) for various reactive species were evaluated by kinetic study and statistical approach (using ¹³C NMR data) in St-Bd anionic copolymerization system with THF as polar additive. The Markovian mechanisms for different propagating reactions in this complex copolymerizing system have been postulated. Furthermore, “pseudo” zero order Markovian mechnism could be sophisticatedly established in the n-BuLi/tertiary amyloxy potassium (t-AmOK)/THF initiated St-Bd copolymerization system, provided that the apparent rate constants of both monomers are equal. Thus, by adjusting the ratio of K/Li and THF/Li, copolymers with composition almost identical to the ratio of initial monomer feed composition at different stages of conversion could be obtained.     

Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

Radical alternating copolymerization of vinyl ethers

New alternating equimolar copolymers of electrophilic trisubstituted ethylenes, methyl 3-phenyl-2-cyanopropenoate and 2-phenyl-1,1-dicyanoethene, with ethyl, n-butyl, i-butyl, t-butyl, 2-chloroethyl, and phenyl vinyl ethers were prepared by free radical initiation. Chemical compositions of the copolymers are 1 : 1 in broad ranges of monomer ratios. The copolymerization rate of both electrophilic monomers with the vinyl ethers increase in the series 2-chloroethyl > ethyl > phenyl > n-butyl > i-butyl > t-butyl. These variations in the reactivity of the vinyl ethers are discussed in terms of their preferred conformations in donor-acceptor complexes with electrophilic trisubstituted ethylenes. © 1993 John Wiley & Sons, Inc.     

Regio- and stereocontrol in the alternating copolymerization of olefins with carbon monoxide

Strictly alternating copolymers between olefins and carbon monoxide are synthesized using cationic palladium catalysts modified by phosphorus or nitrogen ligands. Basic chelate diphosphines as the ligand allow the regioregular copolymerization of aliphatic olefins thus affording, e.g. in the case of propene, poly(1-oxo-2-methyltrimethylene). Steric control of the copolymerization process towards the production of overwhelmingly isotactic copolymers is possible particularly when using atropisomeric ligands. In the case of styrene as the substrate and for all ligands employed the copolymerization process is regioregular. Prevailing syndiotactic structure is obtained with 1,10-phenanthroline or 2,2′-bipyridine as the ligand. Chelate thioether ligands allow the preparation of a completely atactic material. For 4-tert-butylstyrene an isotactic structure became accessible by using chiral bisoxazolidines. The prevailing structure of the copolymers of cyclopentene corresponds to a 1,3-enchainment of the olefin units most probably associated with a prevailing diisotactic structure     

Chain transfer studies of alternating copolymerization

Dimethylaniline (DMA) induces chain transfer in the zinc bromide-complexed donor–acceptor polymerizations of styrene–acrylonitrile to form alternating copolymers. The Mayo plots are linear, but the rates decrease with increase in DMA and degradative chain transfer occurs. Although conventional free-radical transfer agents have negligible effect on the rates or molecular weights, a twentyfold reduction of molecular weight is obtained with DMA. Spectroscopic data indicate the formation of an equimolar complex of DMA and ZnBr₂, but the lowering of molecular weight is not attributable to the reduction of the effective ZnBr₂, concentration. A possible mechanism involving a competition between [ZnBr₂(DMA)₂] and [ZnBr₂,DMA,AN] is suggested.     

Organotin compounds as transesterification catalysts

The relative catalytic activity of 18 organotin compounds in promoting the reaction MeCOOPr + MeOH → MeCOOMe + PrOH is reported and a mechanism suggested.