用变分过渡态理论研究CH3SiH3+H→CH3SiH2+H2反应动力学

用变分过渡态理论对CH3SiH3与H的抽提反应进行了理论研究;利用从头算计算了反应体系的构型、振动频率和能量等信息;计算了温度在298 ～1700K内反应的速率常数和穿透系数。结果表明,在室温下,变分对于此反应影响较大,隧道效应特别明显,计算得到的速率常数和实验值符合得很好。     

Theoretical studies of the radical reaction H2CSiH2 + H

Ab initio molecular orbital calculations on the transition states and barrier heights for the addition of atomic hydrogen to silaethylene are carried out. The activation energy for the addition to the silicon site is lower than that to the carbon site, while the exothermicity is smaller.     

Structures, energetics, and aromaticities of the tetrasilacyclobutadiene dianion and related compounds: (Si4H4)(2-), (Si4H4)(2-)·2Li+, [Si4(SiH3)4](2-)·2Li+, [Si4(SiH3)4](2-)·2Na+, and [Si4(SiH3)4](2-)·2K+

In light of the important recent synthesis of a stable tetrasilacyclobutadiene dianion compound by Sekiguchi and co-workers and the absence of theoretical studies, ab initio methods have been used to investigate this dianion and a number of related species. These theoretical methods predict multiple minima for each compound, and most minima contain folded and bicyclic silicon rings. For (Si(4)H(4))(2-), (Si(4)H(4))(2-)·2Li(+), [Si(4)(SiH(3))(4)](2-)·2Li(+), [Si(4)(SiH(3))(4)](2-)·2Na(+), and [Si(4)(SiH(3))(4)](2-)·2K(+), respectively, the energetically lowest-lying structures are designated A-3 (C(2v) symmetry), B-8 (C(1) symmetry), C-1 (C(2) symmetry), D-1 (C(2) symmetry), and E-1 (C(2h) symmetry). None of these structures satisfies both the ring planarity and the cyclic bond equalization criteria of aromaticity. However, all of the representative NICS values of these lowest-lying structures are negative, indicating some aromatic character. Especially, structures C-1 and D-1 of C(2) symmetry effectively satisfy the criteria of aromaticity due to the slightly trapezoidal silicon rings, which are nearly planar with nearly equal bond lengths. SiH(3) substitution for hydrogen in (Si(4)H(4))(2-)·2Li(+) significantly reduces the degree of aromaticity, as reflected in the substantially smaller NICS absolute values for [Si(4)(SiH(3))(4)](2-)·2Li(+) than those of (Si(4)H(4))(2-) and (Si(4)H(4))(2-)·2Li(+). The aromaticity is further weakened in [Si(4)(SiH(3))(4)](2-)·2Na(+) and [Si(4)(SiH(3))(4)](2-)·2K(+) by replacing lithium with the sodium and potassium cations.     

H原子和SiH2Cl2抽提反应的理论研究

对H+SiH2Cl2反应进行了详细的理论研究,理论证明了抽提氢的通道是唯一可行的反应通道。并在从头算给出的电子结构信息基础上,用变分过渡态理论(CVT)加小曲率隧道效应校正(SCT)等方法对该反应进行了直接的动力学研究,得到该反应的理论速率常数,并详细讨论了各动力学参数沿反应坐标的变化。在较宽的温度范围内,反应速率常数表现出非Arrhenius行为,用三参数公式似合了速-温关系式,为k(T)=(1.32×10^-22)T^3.67exp(-26/T)。理论计算的速率常数与实验数值符合得很好。     

Theoretical Studies on CH3SiH3+H→CH3SiH2+H2 Reaction with the Variational Transitional State Theory

The abstract reaction of CH3SiH3 with H has been studied by using the“direct dynamics”method of variational transition-state theory,which is based on the information on geometries,frequencies and energies calculated by ab initio along the minimum energy path.The rate constants and transmission coefficients were calculated for the temperature range 298～1700K.The result indicates that the variational effect on this reaction is great and the tunneling effect is very obvious at room temperature.The rate constants calculated match well with the experimental value.     

MRD CI calculations of excited states of the SiH3 radical,including potential curves for the inversion mode and the dissociation SiH3 → SiH2 + H

Using the MRD CI method and large basis sets the vertical spectrum of silyl radical (SiH₃) has been calculated. The lowest excited state is the 4s Rydberg state, 41000 cm⁻¹ (5.2 eV) above the ground state. Only one excited valence state (2²E) was encountered, all other states are of Rydberg type. From potential curves for the inversion mode (symmetric bending motion) it was inferred that all Rydberg states are planar, whereas the valence excited state is highly pyramidalized. The investigation of the dissociation reaction SiH₃ → SiH₂ + H leads to the conclusion that the first excited state is dissociative.     

Molecular Engineering of Liquid Crystal Polymers by Living Polymerization. XXIII. Synthesis and Characterization of AB Block Copolymers Based on ω-[(4-Cyano-4′ -Biphenyl)-oxy]alkyl Vinyl Ether, 1H, 1H, 2H, 2H-Perfluorodecyl Vinyl Ether,and 2-(4-Blphenyloxy)ethyl Vinyl Ether with 1H, 1H, 2H, 2H-Perfluorodecyl Vinyl Ether

Abstract

This paper describes the synthesis and characterization of AB block copolymers based on ω-[(4-cyano-4′-biphenyl)oxy]alkyl vinyl ether (6-n), with alkyl being ethyl (6-2), propyl (6-3), nonyl (6-9), and undecanyl (6-11), with 1H, 1H, 2H, 2H-perfluorodecyl vinyl ether (CF8), poly[(-6-n)-b-CF8]X/Y (where X/Y refers to the weight ratio of the two segments), and of 2-(4-biphenyloxy)ethyl vinyl ether (BEVE) with 1H,-1H, 2H, 2H-perfluorodecyl vinyl ether, poly[BEVE-b-CF8]X/Y. They were prepared by living cationic polymerization and exhibit a narrow molecular weight distribution. All block copolymers display a micro-phase-separated morphology when the A segment is in the liquid crystalline phase. Block copolymers based on 6-2, 6-3, and BEVE with CF8 also exhibit a microphase-separated morphology in the melt phase of A and B blocks.     

Theoretical study on the substitution reactions of fluorosilylenoid H2SiLiF with SiH3XH n−1 (X = F,Cl, Br,O, N; n = 1, 1, 1, 2, 3)

The substitution reactions of H₂SiLiF (A) with SiH₃XH _n?1 (X = F, Cl, Br, O, N; n = 1, 1, 1, 2, 3) have been studied using DFT and ab initio methods. The results indicate that the substitution reactions of A with SiH₃XH _n?1 proceed via two reaction paths, I and II. The following conclusions emerge from this work. (i) The substitutions of A with SiH₃XH _n?1 are nucleophilic reactions and occur in a concerted manner. Path I is more favorable than path II. The substitution barriers of A with SiH₃XH _n?1 for path I decrease with the increase of the atomic number of X for the same period systems, whereas the barriers increase with the increase of the atomic number of X for the same family systems. (ii) The substitution products are H₂SiFSiH₃ and LiXH _n?1. If the H atoms in SiH₃ of SiH₃XH _n–1 are substituted by different atoms or groups, silanes H₂SiFSiH₃ obtained via paths I and II would be enantiomers. (iii) All the substitution reactions of A with SiH₃XH _n?1 are exothermic.     

SYNTHESIS OF 3-ARYL-1(2H, 4H) ACRIDONES AND THEIR DERIVATIVES

ＳＹＮＴＨＥＳＩＳＯＦ３－ＡＲＹＬ－１（２Ｈ，４Ｈ）ＡＣＲＩＤＯＮＥＳＡＮＤＴＨＥＩＲＤＥＲＩＶＡＴＩＶＥＳ￥ＲｏｎｇＹＩＮ；ＧｕａｎｇＦａｎＨＡＮ；ＹｕＴｉａｎＬＩ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｄｉｃａｌＬａｂｏｒａｔｏｒｙ，ＪｉｌｉｎＭｅｄｉｅａ...     

H原子和(CH3)2SiH2抽提反应的理论研究

采用UMP2/6-31G(d)理论水平优化了H原子和(CH3)2SiH2抽提反应势能面上的所有驻点,并在此水平基础上进行了内禀反应坐标(IRC)的计算,得到该反应的反应途径(MEP)。应用变分过渡态理论及最小能量途径半经典绝热基态隧道效应校正(MEPSAG)、小曲率半经典绝热基态隧道效应校正(SCSAG)等方法对上述反应进行了动力学研究,期望从理论上提供一套温度范围较宽、精度较高的动力学数据,为阐明反应机理和解释实验结果提供理论依据。     

SiH3No2—SiH3ONO异构化的量子化学研究

用ＭＮＤＯ法研究了ＳｉＨ３ＮＯ２和其异构体ＳｉＨ３ＯＮＯ之间的转化，结果表明，Ｓｉ－Ｎ键的断裂和Ｓｉ－Ｏ键的生成有较小的能垒，反应为放热过程。．     

Critical temperatures,pressures, and densities for the mixtures CO2–C3H8, CO2–nC4H10, C2H6–C3H8, and C3H8–nC4H10

A simple method is developed to estimate mixture critical temperatures (T_c), pressures (P_c), and densities (ρ_c) as a function of overall composition (X) from near critical region experimental coexistence data. This three-step method is applied to four mixtures, CO₂–C₃H₈, CO₂–nC₄H₁₀, C₂H₆–C₃H₈, and C₃H₈–nC₄H₁₀. Isothermal liquid–vapor coexistence data, which includes temperature, vapor pressure, coexisting densities (ρ^ℓ and ρ^v), and coexisting compositions for the more volatile component (x₁^v and x₁^ℓ) are used. In the first step, the difference of the saturated liquid and vapor densities (ρ^ℓ−ρ^v) is fitted to an empirical function in ((P_c−P)/P_c) to obtain P_c. Then P/P_c and ((ρ^ℓ+ρ^v)/2ρ_c) are simultaneously fitted to functions of a polynomial in (X₁−(x₁^v+x₁^ℓ)/2) yielding estimates of ρ_c and X₁. Finally, the discrete estimated critical data points are fitted with an equation to provide a continuous representation of the critical lines. The method is successfully tested for the mixtures, CO₂–C₃H₈ and CO₂–nC₄H₁₀, for which there is a reasonable amount of isothermal data. The procedure is then applied to the mixtures, C₂H₆–C₃H₈ and C₃H₈–nC₄H₁₀, for which there are sparse data. For all four mixtures, the critical temperature line, T_c vs. X₁, matches literature values within ±0.5%. The critical pressure line, P_c vs. X₁, and critical density line, ρ_c vs. X₁, match literature values, in general, within ±2%.     

Crystal structure of K3SbS4·4 1/2 H2O

Summary The crystal structure of K₃SbS₄·4 1/2 H₂O, monoclinic, P2₁/c-C ₅ ^2h ,a=12.732(3),b=7.720(2),c=13.928(4) Å, =90.19(1)°,V=1369.0(5) ų,Z=4, has been determined from X-ray single crystal data and refined by least-squares methods toR=0.031 for 3 024 reflections. The structure is built up from KS_{4 – 5}(H₂O)_{3 – 5} polyhedra and SbS₄ tetrahedra (Sb-S=2.327 Å) which are three-dimensionally linked. The water molecules are bonded to two or three K⁺ ions and form exclusively O-H ... S-type hydrogen bonds. One of the five crystallographically different water molecule sites is due to space limitations only half occupied.

---

Die Kristallstruktur von K₃SbS₄·4 1/2 H₂O

Zusammenfassung Die Kristallstruktur von K₃SbS₄·4 1/2 H₂O, monoklin, P2₁/c-C ₅ ^2h ,a=12.732(3),b=7.720(2),c=13.928(4) Å, =90.19(1)°,V=1369.0(5) ų,Z=4, wurde mit Röntgen-Einkristalldaten bestimmt und für 3 024 Reflexe aufR=0.031 verfeinert. Die Kristallstruktur ist aus dreidimensional verknüpften KS_{4 – 5}(H₂O)_{3 – 5}-Polyedern und SbS₄-Tetraedern (Sb-S=2.327 Å) aufgebaut. Die Wassermoleküle sind an zwei bis drei Kaliumionen gebunden und bilden ausschließlich Wasserstoffbrücken des Typs O-H...S aus. Eine der fünf kristallographisch verschiedenen H₂O-Lagen ist aus Platzmangel nur zur Hälfte besetzt.

     

New 1D and 2D metal oxygen connectivities in Cu(II) succinato and glutarato coordination polymers: [Cu3(H2O)2(OH)2(C4H4O4)2] · 4H2O, [Cu4(H2O)2(OH)4(C4H4O4)2] · 5H2O and [Cu5(OH)6(C5H6O4)2] · 4H2O

Two Cu(II) hydroxo succinates [Cu₃(H₂O)₂(OH)₂(C₄H₄O₄)₂]?·?4H₂O (1) and [Cu₄(H₂O)₂(OH)₄(C₄H₄O₄)₂]?·?5H₂O (2) and one Cu(II) hydroxo glutarate [Cu₅(OH)₆(C₅H₆O₄)₂]?·?4H₂O (3) have been prepared and structurally characterized by single crystal X-ray diffraction methods. They feature 1D and 2D copper oxygen connectivity of elongated {CuO₆} octahedra in “4?+?1?+?1” and “4?+?2” coordination geometries. Within 1, linear trimers of three edge-sharing {CuO₆} octahedra are connected into copper oxygen chains, which are bridged by the anti conformational succinate anions to generate 2D layers with mono terminally coordinating gauche succinate anions on both sides. The layers are assembled into a 3D framework by interlayer hydrogen bonds with lattice H₂O molecules distributed in channels. Different from 1, the principal building units in 2 are linear tetramers of four edge-sharing {CuO₆} octahedra. The tetramers are condensed into copper oxygen chains and the succinate anions interlink them into a 3D framework with triangular channels filled by lattice H₂O molecules. The {CuO₆} octahedra in 3 are edge-shared to form unprecedented 2D inorganic layers with mono terminally coordinating glutarate anions on both sides. Interlayer hydrogen bonding interactions are responsible for supramolecular assembly of the layers into a 3D framework with lattice H₂O molecules in the channels. The inorganic layers in 3 can be described as hexagonal close packing of oxygen atoms with the Cu atoms in the octahedral cavities. The title compounds were further characterized by elemental analyses, IR spectra and thermal analyses.     

Structural, spectroscopic, electrochemical and computational studies of C,C′-diaryl-ortho-carboranes, 1-(4-XC6H4)-2-Ph-1,2-C2B10H10 (X = H, F, OMe, NMe2, NH2, OH and O−)

The influence of aryl ring substituents X (F, OMe, NMe₂, NH₂, OH and O⁻) on the physical and electronic structure of the ortho-carborane cage in a series of C,C′-diaryl-ortho-carboranes, 1-(4-XC₆H₄)-2-Ph-1,2-C₂B₁₀H₁₀ has been investigated by crystallographic, spectroscopic [nuclear magnetic resonance (NMR), UV–vis], electrochemical and computational methods. The cage C1–C2 bond lengths in this carborane series show small variations with the electron-donating strength of the substituent X, but there is no evidence of a fully evolved quinoid form within the aryl substituents in the ground state. In the ¹¹B and ¹³C NMR spectra, the ‘antipodal’ shift at B12, and the C1 shift correlates with the Hammett σ _p value of the substituent X. The UV–visible absorption spectra of the cluster compounds show marked differences when compared with the spectra of the analogous substituted benzenes. These spectroscopic differences are attributed to variation in contributions from the cage orbitals to the unoccupied/virtual orbitals involved in the transitions responsible for the observed absorption bands. Electrochemical studies (cyclic and square-wave voltammetry) carried out on the diarylcarborane series reveal that one-electron reduction takes place at the cage in every case with the voltage required for reduction of the cage influenced by the electron-donating strength of the substituent X, affording a series of carborane radicals with formal [2n + 3] electron counts. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Vibrational spectra in the ν(SiH) and ν(SiD) regions of chloro and bromodisilanes and ab initio geometry studies of C2H5Cl,Si2H5Cl and 1,1-Si2H4Cl2

Infrared measurements in the gas phase are reported for the ν(SiH) and ν(SiD) regions of Si₂H₅X, Si₂D₅X, 1,1-Si₂H₄X₂ and 1,1-Si₂D₄X₂ species where X = Cl, Br. Incomplete Raman data have also been obtained. All three possible isolated SiH stretching frequencies are observed in the spectra of the Si₂D₄X₂ samples, but only two from the Si₂D₅X ones. The missing ν^is(SiH) values are obtained by use of the frequency sum rule, and by harmonic local mode force field treatments of all the available ν(SiH) and ν(SiD) data, using a procedure previously tested on disilane.Ab initio calculations of the geometries of C₂H₅Cl, Si₂H₅Cl and 1,1-Si₂H₄Cl₂ using the 6-31G* basis set are reported. Trends in r_e(CH) or r_e(SiH) values reflect trends in ν^is(CH) or ν^is(SiH) ones. The alpha, trans and gauche effects of halogen are similar in CH and SiH compounds, although smaller in the latter. In both cases, ab initio calculations predict larger effects than are observed in the spectra, especially for the α effect of halogen.A kinetic isotope effect in the halogenation of disilane may occur. Reassignment of earlier spectra of disilyl iodide species is proposed.     

Synthesis and Crystal Structure of 2-Ethoxy-spiro[2H-1, 4,2-benzoxazaphosphorine-3（4H）, 1＇-Cycloheptane] 2-Oxide

1 INTRODUCTION α-Aminophosphonates are an important class of compounds since they are considered as structural analogues of the corresponding α-amino acids. Their utilities as enzyme inhibitors, antibiotics, pharma- cological agents and many other applications are well documented[1~5]. Moreover, cyclic α-amino- phosphonates, one important kind of α-aminopho- sphonates, have attracted chemists’ interests for a long time[6~11]. In order to search for potent and selec- tive herbicides a…     

Extraction,Separation and Spectrophotometric Determination of Bismuth(III) Using 1(4′-Bromophenyl) 4,4,6-Trimethyl (1H,4H)-Pyrimidine-2-Thiol

Abstract

The operating conditions for the spectrophotometric determination of bismuth(III) with 1-(4′-bromophenyl)-4,4,6-trimethyl-(1H,4H)-pyrimidine-2-thiol (4′bromo PTPT) as a ligand by a liquid-liquid extraction technique are presented. In acidic conditions bismuth(III) forms a yellow complex with the ligand which can be extracted in chloroform with an absorption maxima at 410 nm. The molar absorptivity is 1.5×10⁴ l mole^?1 cm^?1 and Sandell's sensitivity is 14.3 ng cm^?2. The difference in the absorbance between the chloroform blank and bismuth(III) sample increases linearly in the concentration range 2-14 ppm at 0.3 M hydrochloric acid. The proposed method is extremely sensitive, rapid, reproducible and has been satisfactorily applied to the determination of trace amounts of bismuth(III) in synthetic mixtures, alloys and pharmaceutical formulations and also provides binary separation of bismuth(III) from selenium, tellurium, lead, antimony, copper and gold. The overall process of extraction and determination takes about 15 to 20 min.     

Ab initio Study of H2O–HCl (1:1, 1:2, 2:1) Complexes

This paper reports on an ab initio (6-31G**) study of 1:1, 1:2, and 2:1 (H₂O) _n (HCl) _m complexes. Stable configurations of the 1:2 and 2:1 (H₂O) _n (HCl) _m complexes and their geometrical and energy characteristics were determined. The vibrational analysis of the complexes was carried out. The effect of hydrogen bonding due to S₁S₀ and T₀T₁ electronic excitations is considered.