流动注射化学发光法测定黄藤素

碱性条件下,铁氰化钾氧化鲁米诺产生化学发光,黄藤素对该体系的化学发光信号具有显著的增强作用。基于此,建立了一种直接测定黄藤素的流动注射化学发光分析新方法。该方法的线性范围为6.0×10-10－3.0×10^-8mol／L（r=0.9956）和3.0×10^-8－3.0×10^-6mol／L（r=0.9981）,检出限为2.5×10^-10mol／L（3σ）。对1.0×10^-9mol／L和1.0×10^-7mol／L的黄藤素连续平行测定11次,其相对标准偏差分别为3.5％和0.73％。该方法用于药物和体液中黄藤素的分析,回收率在96％-102％之间。     

氯酚红分光光度法测定盐酸吡格列酮

在pH9.40的Britton-Robinson广泛缓冲溶液中,氯酚红与盐酸吡格列酮反应,形成离子缔合物,其最大褪色波长位于570 nm处,最大增色波长位于434 nm处。盐酸吡格列酮的浓度分别在1.3×10^-6-1.1×10^-5mol/L和1.5×10^-6-1.2×10^-5mol/L范围内遵守比耳定律,表观摩尔吸光系数分别为4.29×10^4L.mol^-1.cm^-1和1.47×104L.mol^-1.cm^-1,检出限分别为3.50×10^-7mol/L和6.54×10^-7mol/L,回收率为100.8%-101.4%（血样）、99.3%-99.8%（混合样）、98.1%-98.6%（尿样）。方法已用于血样、尿样和混合样中盐酸吡格列酮测定。     

荧光分光光度法测定药物制剂中维生素K3

维生素K3(Vitamin K3,VK3)是一种油溶性化合物,不发荧光。在酸性条件下,VK3可被TiCl3还原为具有荧光的甲萘酚,据此建立了一种测定药物制剂中VK3含量的荧光分光光度法新方法。实验选定甲萘酚的激发波长和发射波长分别为330nm和444 nm。该法荧光强度与VK3的浓度在8.0×10-7~1.6×10-5mol/L范围内呈良好的线性关系,R=0.9987,检出限为8.45×10-9mol/L,回收率为98.6%~102.3%。方法用于市售VK3注射液的测定,结果令人满意。     

β-环糊精与土霉素的相互作用研究及分析应用

以荧光法研究了土霉素（OTC）与环糊精（β-CD）的包合作用,并利用β-CD对OTC荧光的增敏作用建立了一种高灵敏度测定OTC的新方法,土霉素在9.19×10^-8-1.66×10^-5mol/L范围内与荧光强度成正比,方法的检出限为7.4×10^-9mol/L,方法用于药物制剂中土霉素的测定,结果与标示量吻合。荧光光度法测得OTC与β-CD形成1∶1包合物,包合物形成常数为3.68×10^2L/mol。从土霉素和环糊精的分子结构出发,对包合物的形成机理进行了探讨。     

电镀废水中三价铬和六价铬含量的测定

建立了一种可分别同时测定电镀废水中三价铬和六价铬含量的紫外-可见分光光度法。在同一样品溶液中分别于540nm和350nm处同时测定Cr（Ⅲ）和Cr（Ⅵ）的吸光度,在控制酸度的条件下,由于两组分不相互干扰,通过线性方程分别可求出组分中的含量。Cr（Ⅲ）在8．85×10^-7～1．54×10^-5mol／L范围内服从比耳定律,回收率为99．6％,100．2％;Cr（Ⅵ）在9．23×10^-57-1．15×10^-5mol／L范围内服从比耳定律,回收率为97．0％-101．1％。该法与传统国标法相比,操作简便、快速、准确。     

布美他尼在玻碳电极上伏安行为的研究

用微分脉冲伏安（DPV）法研究了利尿剂类药物布美他尼在玻碳电极上的电化学行为。在pH2.87的B-R缓冲液中,布美他尼在＋0.896V（vs.SCE）电位处产生一个阳极氧化峰,其峰电流与布美他尼的浓度在6.0×10^-8—2.5×10^-5mol／L的范围内呈良好的线性关系,检出限（3σ／K）为2.4×10^-8mol／L。将该法应用于布美他尼实际药片及模拟尿样的测定,结果令人满意。初步探讨了布美他尼的电化学机理。     

十六烷基三甲基溴化铵修饰碳糊电极线性扫描伏安法测定尿液中尿酸

本文提出了以十六烷基三甲基溴化铵修饰碳糊电极（CTAB／CPE）直接测定尿酸（UA）的新方法,用线性扫描伏安法（LSV）研究尿酸的电化学行为。在0.1mol／L磷酸盐缓冲溶液（PBS,pH=7.4）中,尿酸在CTAB／CPE上于0.160V处产生一个灵敏的氧化峰,氧化峰电流Ip与尿酸浓度（CuA）在1.0×10^-5—1.0×10^-3mol／L范围内呈良好的线性关系,相关系数为0.9940,检出限为1.0×10^-6mol／L。该方法简单实用,可以直接用于人体尿液中尿酸的检测。     

山楂果和桑枝提取物中总黄酮含量的Fe（phen）3^2＋探针共振瑞利散射法测定

在pH值约为8.0的BR缓冲介质中,桑色素、槲皮素和芦丁等黄酮类物质能与Fe（phen）32＋反应形成离子缔合物,此时将引起共振瑞利散射（RRS）显著增强,最大RRS波长均位于310 nm。在一定范围内散射强度（ΔI）与黄酮类物质的浓度成正比,据此可以建立用Fe（phen）3^2＋测定某些黄酮类物质的新RRS法。对桑色素、槲皮素和芦丁的检出限（3σ/K）分别为1.25×10^-7mol/L（37.74μg/L）,1.80×10^-7mol/L（54.42μg/L）,2.72×10^-7mol/L（167.30μg/L）。研究了反应的适宜条件和影响因素,考察了共存物质的影响。结果表明,方法有较好的选择性。分别以芦丁和桑色素为对照品测定了中药材山楂果和桑枝中的总黄酮含量,对反应机理进行了初步探讨。     

盐酸倍他司汀对鲁米诺-高碘酸钾体系后发光作用机理的探讨及其快速测定

实验发现盐酸倍他司汀对鲁米诺-高碘酸钾发光体系具有后化学发光作用,并对其作用机理进行了探讨。结合流动注射技术,优化了反应条件,并建立了测定盐酸倍他司汀的新方法。该方法简便、快速、准确,线性范围为2.0×10^-7－4.0×10^-4mol／L（r=0.9975）,检出限为1.0×10^-7mol／L;对4.0×10^-5mol／L的盐酸倍他司汀进行了11次平行测定,相对标准偏差为2.9％。方法成功地用于盐酸倍他司汀片中盐酸倍他司汀的测定。     

酶催化动力学光度法测定H2O2

H2O2能够氧化偶氮染料刚果红使之褪色,而模拟酶—血红蛋白对其具有催化作用。据此建立了一种以刚果红为指示剂的H2O2-刚果红-血红蛋白酶催化反应体系测定痕量H2O2的新方法。确定了反应的最佳条件,体系的酸度为pH10.7的NH3-NH4Cl缓冲溶液,最大吸收波长为497 nm。该法的线性范围为8.0×10^-8-8.0×10^-5mol/L,检出限为1.97×10^-9mol/L,表观摩尔吸光系数为4.6×10^4L.mol-1.cm^-1。该方法可用于雨水及消毒水中H2O2的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.