Modification of glycidyl methacrylate based cryogels by cellulose nanocrystals and determination of dye adsorption performance

Cellulose - Cellulose nanocrystal (CNC) modified poly(2-hydroxy ethyl methacrylate- glycidyl methacrylate) [poly(HEMA-GMA)] cryogels were prepared by base-catalyzed CNC addition. Resultant cryogels...     

Drying of a cellulose II gel: effect of physical modification and redispersibility in water

The agglomeration of cellulosic materials upon drying, often called hornification, causes a reduction of water retention, among other undesired effects. It is one of the main issues in industrial cellulose processing, especially with regard to nanocelluloses. As a consequence, high transportation and storage costs arise since nanocelluloses need to remain in aqueous suspensions unless trade-offs in reactivity, redispersibility and surface properties are accepted. In this study, different drying strategies for TENCEL^® gel, a nanostructured gel derived from the Lyocell process consisting of spherical particles, are compared and evaluated. First, freeze-drying with consideration of the influence of freezing temperature and the use of tert-butanol as cryo-protectant, and second, simple oven-drying at 60 °C. Surprisingly, oven-dried xerogels showed higher water retention values and also better colloidal stability than the cryogels. This is in stark contrast to cellulose nanofibrils for which freeze-drying has been shown to be significantly superior to oven drying in terms of redispersibility. For the TENCEL^® gel, oven-drying was thus selected and the influence of additives on the redispersibility of the cellulose II gel was studied by means of the common water retention value, particle size, colloidal stability, appearance of the redispersed gel and viscosity. The addition of the polysaccharides carboxymethyl cellulose or xanthan showed the most promising results with regard to redispersibility. Also sucrose and ammonium bicarbonate provided higher colloidal stabilities than that of the untreated TENCEL^® gel. The redispersibility of the cellulose II xerogels could thus be significantly improved by simple and cost-efficient mixing with additives prior to drying.     

Preparation of agarose/chitosan composite supermacroporous monolithic cryogels for affinity purification of glycoproteins

Supermacroporous agarose/chitosan composite monolithic (AC CM) cryogels were prepared for affinity purification of the major egg white glycoproteins, ovalbumin (OVA), and ovotransferrin (OVT). The supermacroporous AC CM cryogels were produced by cryocopolymerization of agarose/chitosan blend solutions using glutaraldehyde as the cross-linker. The 3-aminophenlyboronic acid ligand was immobilized by covalent binding to epoxy-group-coupled supermacroporous AC CM cryogels. The microstructure morphologies of these cryogels were analyzed by scanning electron microscopy. The supermacroporous AC CM cryogels contained a continuous interpenetrating polymer network matrix with interconnected pores of 10-100 μm in size. The composite cryogels offered high mechanical stability and had specific recognition for glycoproteins. The maximum binding capacity of OVA adsorption from aqueous solutions was 55.6 mg/g. The matrix could be reused 11 times without significant loss in OVA adsorption capacity. The recovery yields of OVA and OVT from egg white were estimated to be 89 and 93%, respectively.     

Cryogenic Designing of Biocompatible Blends of Polyvinyl alcohol and Starch with Macroporous Architecture

The present paper discusses synthesis, characterization, and blood compatibility studies of macroporous cryogels of PVA and starch. Biocompatible spongy porous hydrogels of polyvinyl alcohol–starch have been synthesized by repeated freezing–thawing methods and characterized by Infra red (FTIR) and environmental scanning electron microscopy (ESEM) techniques, respectively, to gain insights for structural and morphological features. The FTIR analysis of prepared cryogels indicated that starch was introduced into the network of cryogel possibly via formation of hydrogen bonds between the PVA and starch clusters. The “cryogels” were evaluated for their water uptake potentials and influence of various factors such as chemical architecture of the spongy hydrogels, pH and temperature of the swelling bath were investigated on the degree of water sorption by the cryogels. The hydrogels were also swollen in salt solutions and various simulated biological fluids. The biocompatibility of the prepared cryogels was judged by in vitro methods of blood–clot formation viz. percent haemolysis and protein (BSA) adsorption. The cryogels were also studied for their pores morphology and percent porosity and the effect of chemical composition on the extent of porosity was also investigated.     

Biocompatible cryogels of thermosensitive polyglycidol derivatives with ultra-rapid swelling properties

Novel thermosensitive macroporous cryogels, based on various hydrophobically modified high molar mass (HMM) polyglycidol precursors, were synthesized using the UV-irradiation technique. The method involved the preparation of a semi-dilute aqueous solution of thermosensitive poly(glycidol-co-ethyl glycidyl carbamate) (PGL-Et), subsequent freezing at a moderately negative temperature (−20 °C) and irradiation with UV light. All PGL-Et cryogels had a spongy-like structure of smooth polymer walls surrounding interconnected macroscopic pores. Consequently, the cryogels exhibited temperature triggered, reversible, ultra-rapid volume phase transition (VPT) from a swollen to deswollen state within 20–25 s. The VPT temperature of the PGL-Et cryogels was strongly dependent on the degree of modification of the PGL precursors and it decreased proportionally with increased ethyl glycidyl carbamate content. The PGL-Et cryogels were used as a scaffold for skin cell (fibroblast) adhesion. Adhesion and proliferation tests indicated that the gels were good supports for cell cultivation.     

Composite cryogel with immobilized concanavalin A for affinity chromatography of glycoproteins

Composite cryogels containing porous adsorbent particles were prepared under cryogelation conditions. The composites with immobilized concanavalin A (Con A) were used for capturing glycoproteins. Adsorbent particles were introduced into the structure in order to improve the capacity and to facilitate the handling of the particles. The monolithic composite cryogels were produced from suspensions of polyvinyl alcohol particles and porous adsorbent particles and cross‐linked under acidic conditions at sub‐zero temperature. The cryogels were epoxy activated and Con A was immobilized as an affinity ligand. Binding and elution of horseradish peroxidase (HRP) was studied in batch experiment and in a chromatographic setup. Increasing adsorbent concentration in composite cryogels will increase ligand density, which therefore enhances the amount of bound HRP from 0.98 till 2.9 (milligram enzyme per milliliter of gel) in the chromatographic system. The material was evaluated in 10 cycles for binding and elution of HRP.     

Histidine-epoxy-activated sepharose beads embedded poly (2-hydroxyethyl methacrylate) cryogels for pseudobiospecific adsorption of human immunoglobulin G

The use of highly purified immunoglobulin became among the most powerful adopted strategies in therapeutic trials nowadays. Their role as immunomodulatory and anti-inflammatory agents has widened their scope of use. A novel continuous supermacroporous monolithic cryogels embedded with histidine-epoxy-activated-sepharose beads were synthetized as a new monolithic adsorbents for the separation of immunoglobulin G from human serum. The histidine-epoxy-activated-sepharose beads were embedded into the 2-hydroxyethyl methacrylate (HEMA) cryogels present in frozen aqueous solution inside a plastic syringe. The microstructure morphology of the cryogels was characterized by swelling measurement and scanning electron microscopy. The adsorption of human IgG on the histidine-epoxy-activated-sepharose beads pHEMA cryogels appeared to follow the Langmuir–Freundlich adsorption isotherm model. The maximum IgG adsorption was observed at 4°C and pH 7.4 and was found to be 26.95 mg/g of cryogel which is close to that obtained experimentally (24.49 mg/g). The cryogels were used for several adsorption-desorption cycles without any negligible decrease in their adsorption capacity.     

Redispersibility of Acrylate Polymer Powder and Stability of Its Reconstituted Latex

The acrylate redispersible polymer powder (RPP) was produced from acrylate latex via spray drying, which was synthesized by latex polymerization with the configuration of soft core and hard shell. The powder's redispersibility and stability of its reconstituted latex were achieved through incorporating monomer methacrylic acid (MAA), which has functional carboxyl group and can provide an ionization effect in alkaline range. The influence of pH value and MAA amount on the redispersibility and stability were studied. The stabilization mechanism for reconstituted latex was also investigated. The acrylate RPP has good redispersibility at MAA of 4–5% and pH values between 9.0 and 10.0. The reconstituted latex is stable at these conditions due to high zeta potential and strong electrostatic repulsion force.     

Effect of 1,4‐dioxane on synthesis of macroporous poly(N‐isopropylacrylamide) hydrogels

Thermosensitive Poly(N‐isopropylacrylamide) (PNIPA) hydrogels were synthesized by a free radical solution polymerization in three different ways. Normal hydrogels were prepared at room temperature and normal cryogels were prepared at subzero temperature. A cation surfactant dodecyl dimethyl benzyl ammonium bromide (DDBAB) was used during preparation of novel cryogels in freezing state. The response rates of normal hydrogels were very slow, whereas the rates of both normal and novel cryogels were very fast because of the macroporous structure of the cryogels. Mixed solvents which were composed of pure water and 1,4‐dioxane at various concentrations were used instead of pure water during the polymerization. The effects of the mixed solvent on morphology, swelling ratio, and deswelling/reswelling kinetics of the three kinds of hydrogels were investigated. For normal hydrogels and normal cryogels, there was no remarkable difference no matter the mixed solvent or pure water was used. However, the properties of the resulted novel cryogels were much different with the concentration of dioxane. Finally, the resulted hydrogels were used for concentrating emulsified paraffin. The different separation performance was attributed to the different structure of gel matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6594–6603, 2008     

Redox-responsive degradable PEG cryogels as potential cell scaffolds in tissue engineering

A Michael addition strategy involving the reaction between a maleimide double bond and amine groups is investigated for the synthesis of cryogels at subzero temperature. Low-molecular-weight PEG-based building blocks with amine end groups and disulfide-containing building blocks with maleimide end groups are combined to synthesize redox-responsive PEG cryogels. The cryogels exhibit an interconnected macroporous morphology, a high compressive modulus and gelation yields of around 95%. While the cryogels are stable under physiological conditions, complete dissolution of the cryogels into water-soluble products is obtained in the presence of a reducing agent (glutathione) in the medium. Cell seeding experiments and toxicologic analysis demonstrate their potential as scaffolds in tissue engineering.     

Production of foamed cryogels by chemical gas generation in an aqueous solution of poly(vinyl alcohol)

Foamed cryogels were produced using the gas liberated in a redox reaction in an aqueous solution of poly(vinyl alcohol). The kinetics of the gas-generating reaction was studied. The mechanical and thermal characteristics of the foamed cryogels obtained were determined.     

DNA adsorption via Co(II) immobilized cryogels

The separation and purification of important biomolecule deoxyribonucleic acid (DNA) molecules are extremely important. The adsorption technique among these methods is highly preferred as the adsorbent cryogels are pretty much used due to large pores and the associated flow channels. In this study, the adsorption of DNA via Co(II) immobilized poly(2-hydroxyethyl methacrylate-glycidyl methacrylate) [poly(HEMA-GMA)] cryogels was performed under varying conditions of pH, interaction time, initial DNA concentration, temperature, and ionic strength. For the characterization of cryogels; swelling test, Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), surface area (BET), elemental and ICP-OES analysis were performed. L-lysine amino acid was chosen as Co(II)-chelating agent and the adsorption capacity of cryogels was determined as 33.81 mg DNA/g cryogel. Adsorption of pea DNA was studied under the optimum adsorption conditions and DNA adsorption capacity of cryogels was found as 10.14 mg DNA/g cryogel. The adsorption process was examined via Langmuir and Freundlich isotherm models and the Langmuir adsorption model was determined to be more appropriate for the DNA adsorption onto cryogels.     

Glycosaminoglycan-Based Cryogels as Scaffolds for Cell Cultivation and Tissue Regeneration

Cryogels are a class of macroporous, interconnective hydrogels polymerized at sub-zero temperatures forming mechanically robust, elastic networks. In this review, latest advances of cryogels containing mainly glycosaminoglycans (GAGs) or composites of GAGs and other natural or synthetic polymers are presented. Cryogels produced in this way correspond to the native extracellular matrix (ECM) in terms of both composition and molecular structure. Due to their specific structural feature and in addition to an excellent biocompatibility, GAG-based cryogels have several advantages over traditional GAG-hydrogels. This includes macroporous, interconnective pore structure, robust, elastic, and shape-memory-like mechanical behavior, as well as injectability for many GAG-based cryogels. After addressing the cryogelation process, the fabrication of GAG-based cryogels and known principles of GAG monomer crosslinking are discussed. Finally, an overview of specific GAG-based cryogels in biomedicine, mainly as polymeric scaffold material in tissue regeneration and tissue engineering-related controlled release of bioactive molecules and cells, is provided.     

Highly Elastic Super-Macroporous Cryogels Fabricated by Thermally Induced Crosslinking of 2-Hydroxyethylcellulose with Citric Acid in Solid State

Biopolymer materials have been considered a “green” alternative to petroleum-based polymeric materials. Biopolymers cannot completely replace synthetic polymers, but their application should be extended as much as possible, exploiting the benefits of their low toxicity and biodegradability. This contribution describes a novel strategy for the synthesis of super-macroporous 2-hydroxyethylcellulose (HEC) cryogels. The method involves cryogenic treatment of an aqueous solution of HEC and citric acid (CA), freeze drying, and thermally induced crosslinking of HEC macrochains by CA in a solid state. The effect of reaction temperature (70–180 °C) and CA concentration (5–20 mass % to HEC) on the reaction efficacy and physico-mechanical properties of materials was investigated. Highly elastic cryogels were fabricated, with crosslinking carried out at ≥100 °C. The storage modulus of the newly obtained HEC cryogels was ca. 20 times higher than the modulus of pure HEC cryogels prepared by photochemical crosslinking. HEC cryogels possess an open porous structure, as confirmed by scanning electron microscopy (SEM), and uptake a relatively large amount of water. The swelling degree varied between 17 and 40, depending on the experimental conditions. The degradability of HEC cryogels was demonstrated by acid hydrolysis experiments.     

Specific features of the polyelectrolyte behavior of weakly charged cryogels of polyacrylamide and poly(N-isopropylacrylamide)

Specific features of the polyelectrolyte behavior of weakly charged common gels and cryogels of copolymers of polyacrylamide and poly(N-isopropylacrylamide) with sodium acrylamido-2-methyl-1-propyl sulfonate are investigated. The cryogels are synthesized in frozen solutions at ?15°C. It is shown that the polyelectrolyte swelling is significantly weaker in the case of cryogels than that in the case of gels synthesized in solutions. For thermosensitive gels with isopropylacrylamide groups, collapse occurs during heating. Charging of a common gel leads to a noticeable (18°C) increase in the transition temperature. For a cryogel, this growth is 3°C. During the interaction with cetylpyridinium chloride, the gel contraction is much more pronounced for common weakly charged gels. At the same time, walls of pores of a collapsed cryogel contain a smaller amount of the solvent. Isotherms of the adsorption of a cationic surfactant by anionic common gels and cryogels differ insignificantly. Model gels synthesized in concentrated acrylamide solutions exhibit very weak polyelectrolyte swelling, similar to that of cryogels. The behavior of cryogels is explained by a very high local concentration of crosslinks due to a strong entanglement of polymer chains.     

1H NMR Self-Diffusion Study of Morphology and Structure of Polyvinyl Alcohol Cryogels

The multicomponent self-diffusion of the polyvinyl alcohol (PVA) cryogels prepared by a freezing-thawing treatment of aqueous and water-DMSO solutions of PVA has been studied with the NMR FT-PGSE method. The temperature dependencies of the self-diffusion coefficients, Ds, for the PVA chains have a maximum at 45 degrees C due to the syneresis of cryogels. They are quite different from the monotonous increase of Ds for the aqueous solutions of PVA. Evaluated apparent activation energies, Ea, of the self-diffusion for the PVA chains in the PVA solutions and cryogels in D2O are practically the same and equal 22-24 kJ/mol below the crucial point. The proton spin-lattice relaxation times, T1, of the PVA chain also coincide with one another for solutions and cryogels. This means that molecular packing in cryogels depends mainly on the dimensions of the ice and polymer microcrystallites formed by freezing the solution. Above the crucial point polymer compartments become firmer, and the chain mobility somewhat reduces. The strength of cryogels also increases along with growing the DMSO contents and decreases by the BSA addition. For estimation of the cryogel morphology, effects of the restricted diffusion of both the water and PVA in a q-space have been taken into account. By the introduction of DMSO to cryogels the solvent filled pores become smaller, and channels become much shorter. The diameter of the PVA filaments is similar to those for all the cryogels, but the length of filaments with D2O is twice that for cryogels with a mixed solvent. Entrapment of BSA in the cryogel matrix by preparation leads to the increase of an average diameter of the water filled pores and destroys molecular packing the cryogel. Copyright 1999 Academic Press.     

Protein chromatography by molecular imprinted cryogels

Abstract

Molecularly imprinted cryogels for protein recognition have received much attention in recent years with the development of supermacroporous polymer systems. Molecularly imprinted cryogels, which offer great advantages for the selective and effective purification and separation of biomacromolecules from their sources, have become an important candidate for affinity matrix. Cryogels with their macroporous structure give rise to use them in different applications, such as tissue engineering, protein recognition and separation fields and environmental issues. This review highlights the principles of molecular imprinting technology, the preparation and properties of cryogels, the recent developments and applications of molecularly imprinted cryogels especially in protein chromatography.     

Reduction of silver ions to silver with polyaniline/poly(vinyl alcohol) cryogels and aerogels

The macroporous conducting polymer cryogels were prepared by the oxidation of aniline hydrochloride in the frozen aqueous solutions of poly(vinyl alcohol) at ? 24 °C. Corresponding polyaniline aerogels supported with poly(vinyl alcohol) have been obtained after thawing of cryogels followed by freeze-drying. Silver was deposited on the composites using the ability of polyaniline to reduce silver ions after the immersion in silver nitrate solutions. Swollen cryogels were coated only on the surface with macroscopic silver particles due to the closed-pore structure in cryogels and limited penetration of silver ions into macropores. The diffusion of silver ions to freeze-dried aerogels was better and further improved by vacuum treatment. Silver microcubes were produced in the pores, the weight fraction of silver in dry composites being typically several per cent, a maximum 13 wt%. The conductivity of the aerogels compressed to pellets depended on the processing and the highest value was 0.27 S cm^?1. The aerogels containing silver were characterized in detail with Raman spectroscopy.     

Preparation of supermacroporous cryogels with improved mechanical strength for efficient purification of lysozyme from chicken egg white

A novel, facile, and robust strategy was proposed to increase the pore size and mechanical strength of cryogels. By mixing the monomers of acrylamide and 2‐hydroxyethyl methacrylate as the precursor, a monolithic copolymer cryogel with large interconnected pores and thick pore walls was prepared. Hydrogen bonding between the two monomers contributed to the entanglement and aggregation of the copolymers, thickening the pore walls and resulting in larger pore sizes. Analysis via mercury porosimetry demonstrated that the interconnected pore diameter of the copolymer cryogel ranged from 10‐350 µm, which was far larger than that of the cryogels from one monomer (10‐50 µm). Additionally, the thicker pore walls of the copolymer cryogel improved its mechanical strength. Affinity cryogels were prepared through covalent immobilization using Tris(hydroxymethyl)aminomethane as a coupling agent, and the affinity binding of lysozymes on Tris‐cryogel was evaluated by the Langmuir isothermal adsorption with the maximum adsorption capacity of 360 mg/g. Compared with that of the Tris‐cryogels produced from one monomer, the copolymer Tris‐cryogel exhibited higher adsorption capacity and lysozyme purity, when the chicken egg white solution flowed solely driven by gravity. This work provides a new avenue for designing and developing supermacroporous cryogels for bioseparation.     

Study of cryostructurization of polymer systems VII. Structure formation under freezing of poly(vinyl alcohol) aqueous solutions

Rheological properties of the cryogels produced by freezing of concentrated aqueous solutions of poly(vinyl alcohol) have been studied. These properties were shown to depend on the polymer concentration in the initial solution, on PVA molecular weight, cryostructurization duration and temperature. Electron microscopy demonstrates the heterogeneous porous structure of these cryogels and the dependence of the observed pattern on the conditions of formation of the studied objects.