Electrochemical formation and properties of two-component films of transition metal complexes and C60 or C70

The electrochemically active polymers have been formed during electro-reduction carried out in solution containing fullerenes, C₆₀ or C₇₀, and transition metal complexes of Pd(II), Pt(II), Rh(III), and Ir(I). In these films, fullerene moieties are covalently bounded to transition metal atoms (Pd and Pt) or their complexes (Rh and Ir) to form a polymeric network. All films exhibit electrochemical activity at negative potentials due to the fullerene cages reduction process. For all studied metal complexes, yields of formation of films containing C₇₀ are higher than yields of electrodeposition of their C₆₀ analogs. C₇₀ /M films also exhibit higher porosity in comparison to C₆₀/M layers. The differences in film morphology and efficiency of polymer formation are responsible for differences in electrochemical responses of these films in acetonitrile containing supporting electrolyte only. C₇₀/M films shows more reversible voltammeric behavior in negative potential range. They also show higher potential range of electrochemical stability. Processes of film formation and electrochemical properties of polymers depend on the transition metal ions or atoms bonding fullerene cages into polymeric network. The highest efficiency of polymerization was observed for fullerene/Pd and fullerene/Rh films. In the case of fullerene/Pd films, the charge transfer processes related to the fullerene moieties reduction in negative potential range exhibit the best reversibility among all of the studied systems. Capacitance performances of C₆₀/Pd and C₇₀/Pd films deposited on the porous Au/quartz electrode were also compared. Capacitance properties of both films are significantly affected by the conditions of electropolymerization. Only a fraction of the film having a direct contact with solution contributes to pseudocapacitance. Capacitance properties of these films also depend on the size of cations of supporting electrolyte. The C₇₀/Pd film exhibits much better capacitance performance comparison to C₆₀/Pd polymer.     

Influence of the electrolyte composition of the subphase on the structure of 2D films of fullerene C60

The morphology of 2D films of fullerene C₆₀ on interfaces has been studied by Brewster angle microscopy and atomic force microscopy. Fullerene C₆₀ tends to aggregate, forming supramolecular structures with a surface area per C₆₀ molecule from 21.6 to 2900 Ų. As the area per C₆₀ molecule decreases, monomolecular clusters gradually transform into multiplayer structures. The introduction of an electrolyte into the system prevents the formation of fullerene globules and favors the formation of more homogeneous films.     

DSC investigation of the polystyrene films filled with fullerene

Polystyrene composite films with different content of C₆₀?+?C₇₀ fullerene mix have been obtained from o-xylene solutions. The mass fraction of fullerene was varied from 0.01 to 0.1 mass%. The glass transition temperatures and specific heat capacities in range of 293?C423?K have been determined for the films by DSC method. The plasticization of the polymer is observed in thermal properties of the films under influence of small fullerene additions. The values of T _g and C _P decrease and thermal coefficient of heat capacity b increase as fullerene content increases up to 0.02 mass%. The effect of interaction between polymer and fullerene molecules on thermal properties becomes evident at higher fullerene content in range from 0.02 to 0.1 mass%. At this the values of T _g and C _P increase and b coefficient decrease with increasing content of fullerene. Concentration dependence of C _P and b values is less steep for polymer composite films in elastic state at temperatures above T _g. Molecular interactions in the composites are discussed in view of our-self and literature data.     

The structure of fullerene films and their metallocene doping

Hexagonal close-packed (HCP) C₆₀ and C₇₀ films have been prepared by the Langmuir method and examined by electron microscopy and electron-diffraction analysis. It has been shown that the vacuum deposition of a C₆₀+C₇₀ mixture results in the formation of a film with small sized grains and a distorted C₆₀-HCP structure. The simultaneous deposition of C₆₀ and ferrocene results in the formation of a film with a changed morphology and an electron-diffraction pattern that contains a variable amount of ferrocene depending on the experimental conditions. The electron-diffraction pattern corresponds to the presence of the known molecular complex C₆₀[(C₅H₅)₂Fe]₂. The analogous simultaneous deposition of fullerene C₆₀ and cobaltocene results in the formation of a C₆₀ film stable in air and water, which contains carbon and cobalt (from the data of X-ray fluorescence, electron microscopy and microdiffraction). It has a different morphology and different diffraction patterns than pure C₆₀ films and, depending on the cobaltocene content (relative to that of fullerene), appears to be a fullerite film doped with various amounts of cobaltocenium fullende, which is an ionic compound.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1379–1383, August, 1994.The work was financially supported by the Russian Foundation for Basic Research (Projects 93-03-4676 and 93-03-18368).     

Conversion of isopropyl alcohol to acetone in fullerite cavities

Fullerite with cavities containing dichlorobenzene (DCB) and isopropyl alcohol (IPA) molecules was prepared by the addition of IPA to a solution of fullerene C₆₀ in DCB. On heating in vacuo fullerite evolves IPA, and the temperature increase to 200—350 °C results in the evolution of acetone. No products of DCB conversion were observed. Possible products of the interaction of 60 with two IPA molecules were calculated by the quantum chemical method. New data on the fullerite structure were obtained by transmission electron microscopy X-ray powder diffractometry, mass spectrometry, IR spectroscopy, and other methods. One of the possible mechanisms of the reaction IPA → acetone was considered.     

Fullerene C6 0 Aggregates in Polymethyl Methacrylate Films

The structure of aggregates of fullerene C_{6 0} introduced into films of radical polymethyl methacrylate in the stage of solution preparation was studied by wide-angle X-ray diffraction.     

Three-Dimensional Cubic and Dice-Like Microstructures of Higher Fullerene C78 with Enhanced Photoelectrochemical and Photoluminescence Properties

The single-crystal micro/nanostructures of fullerene species, namely C₆₀ and C₇₀, have been previously studied, but studies on the morphology and properties of higher fullerenes have rarely been reported due to the limited amount of samples and their ellipsoidal isomeric structures. Herein, we report the formation of three-dimensional (3D) micro-cubes and micro-dice of a higher fullerene (C₇₈) via a facile liquid–liquid interfacial precipitation (LLIP) method. The micro-cubes were prepared by regulating the concentration of C₇₈ in trimethylbenzene (TMB) and the volume ratio of TMB and isopropanol. Interestingly, the micro-cubes are transformed into micro-dice with an open-hole on each crystal face by simply shaking the solution. X-ray diffraction and Fourier-transform infrared spectroscopic studies revealed a simple cubic unit cell with a lattice constant of 10.6 Å and intercalated TMB molecules in both crystals. The C₇₈ cubic and dice-like microstructures exhibited enhanced photoelectrochemical and photoluminescence properties compared with pristine C₇₈ powder, indicating their potential applications as photodetectors and photoelectric devices.     

Synthesis of a [60]fullerene‐functionalized poly(vinyl chloride) derivative by stereospecific chemical modification of PVC

The covalent attachment of [60]fullerene (C₆₀) to two poly(vinyl chloride) (PVC) samples with different isotactic content is achieved by direct reaction in o‐dichlorobenzene (o‐DCB) solution in the presence of AIBN. The extent of fullerenation is controlled by varying the C₆₀ feed ratio. The pendant C₆₀‐chemically modified PVC polymers are soluble in tetrahydrofuran (THF) and have been characterized by UV–vis, NMR, FTIR, DSC, TGA, cyclic voltammetry, and SEM. The quantitative microstructural analysis after covalent attachment of the bulky C₆₀ moiety to the PVC has been followed by ¹³C NMR spectroscopy. From the results it can be concluded that the modification of PVC by graft reaction through free radical reaction proceeds by a stereoselective mechanism. This conclusion has been confirmed on the basis of the increase of the glass‐transition temperature (T_g) and the thermal stability of the C₆₀‐chemical modified PVC samples. The fullerenated PVCs obtained show good electron acceptor properties, as evidenced by electrochemical investigations. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5408–5419, 2007     

Methyl methacrylate polymerization in the presence of C60 (C70) and molecular characteristics of fullerene-containing poly(methyl methacrylate)

Kinetics was studied of bulk polymerization of methyl methacrylate initiated by dicyclohexyl peroxydicarbonate in the presence of tri-n-butylborane and fullerene C₆₀ (or C₇₀) at variable ratio initiator: fullerene. The deceleration of the polymerization in the first stage of the reaction (below 10% conversion) was established by dilatometric method that depended on the fullerene concentration and the mode of its addition to the monomer. It was shown that at similar ratios initiator: fullerene the C₆₀ inhibited the polymerization process considerably stronger than C₇₀. The gel-permeation chromatography revealed the widening of the molecular weight distribution of the poly(methyl methacrylates) containing C₆₀ or C₇₀ compared to its analog synthesized under the same conditions without fullerene. It was established that in the fullerene-containing poly(methyl methacrylates) all the framework nanospecies are linked by covalent bonds and are mostly accumulated in the low-molecular fractions. The effect of the covalently bound fullerene on the molecular characteristics of polymers were investigated by translational isothermal diffusion, high-speed sedimentation, and viscometry     

Fluorescence Quenching Study of Zinc Bisporphyrins by Fulleropyrrolidines and Their N-Oxides

Novel phenylene-bridged zinc bisporphyrins （1-4）, fulleropyrrolidines （C60-m, C60-h） and their N-oxides （C60-mo, C60-ho） were synthesized. The fluorescence quenching processes of bisporphyrins in toluene solution by fulleropyrrolidines and their N-oxides were investigated by steady-state fluorescence spectra. The fluorescence quenching constants proved that the fluorescence quenching ability was decreased as reduction of the pyrrolidine functional groups of fullerene surface： C60-h〉C60-m〉C60, and the fluorescence quenching ability was increased about 1.3-7.4 times by utilizing fulleropyrrolidine N-oxides （C60-mo, C60-ho） compared to fulleropyrrolidine compounds （C60-m, C60-h）. The results revealed photoinduced electron transfer （PET） efficiency between bispor-phyrin and fullerene derivatives could be tunable by change of functional groups on fullerene surface.     

Investigation of fullerene C60 effect on properties of polymethylmethacrylate exposed to ionizing radiation

Effect of fullerene C₆₀ was investigated on thermal, mechanical and optical properties of polymethylmethacrylate (PMMA) under ionizing radiation. It was stated that fullerene C₆₀ behaves as an effective antirad with respect to PMMA. Fullerene C₆₀ addition raises temperature of destruction for polymer subjected to electron radiation by 20-25 °C, lowers the rate from 4 to 4.5 times and increases the activation barrier for radiated PMMA destruction reaction. Fullerene C₆₀ addition promotes improvement of strength properties of PMMA: for films containing C₆₀ addition and else subjected to electron radiation treatment a decrease in rupture strength is 10-15%, for samples containing no fullerene it equals ∼25%. Interaction of free radicals with fullerene at radiation treatment influences optical characteristics of PMMA films.     

Quantum Chemical Insight of the Dimetallic Sulfide Endohedral Fullerene Sc2S@C70: Does It Possess the Conventional D5h Cage?

Like C₆₀, C₇₀ is one of the most representative fullerenes in fullerene science. Even though there are 8149 C₇₀ isomers, only two of them have been found before: the conventional D_5h and an isolated pentagon rule (IPR)‐violating C_2v(7854). Through the use of quantum chemical methods, we report a new unconventional C₇₀ isomer, C₂(7892), which survives in the form of dimetallic sulfide endohedral fullerene Sc₂S@C₇₀. Compared with the IPR‐obeying C₇₀ and the C_2v(7854) fullerene with three pairs of pentagon adjacencies, the C₂(7892) cage violates the isolated pentagon rule and has two pairs of pentagon adjacencies. In Sc₂S@C₂(7892)‐C₇₀, two scandium atoms coordinate with two pentalene motifs, respectively, presenting two equivalent Sc? S bonds. The strong coordination interaction, along with the electron transfer from the Sc₂S cluster to the fullerene cage, results in the stabilization of the non‐IPR endohedral fullerene. The electronic structure of Sc₂S@C₇₀ can be formally described as [Sc₂S]⁴⁺@[C₇₀]^4?; however, a substantial overlap between the metallic orbitals and cage orbitals has also been found. Electrochemical properties and electronic absorption, infrared, and ¹³C NMR spectra of Sc₂S@C₇₀ have been calculated theoretically.     

Effects of Precursors and Plasma Parameters on Fullerene Synthesis in RF Thermal Plasma Reactor

Synthesis of fullerenes from graphite powders of different grade was studied in a radiofrequency (RF) plasma reactor. Dependence of fullerene yield on the properties and feed rate of precursors and on the helium content of plasma gas was studied in details. The fullerene yield was influenced by the mean size and the thermal conductivity of graphite particles on the one hand, and the helium content of the gas phase on the other. Soot containing fullerene mixture of 5.9% was produced in best conditions found in this work. The main component of the fullerene mixture was C₆₀. In addition, it contained about 30% of C₇₀ (corresponding to a C₆₀/C₇₀ mass ratio of 2.64). Higher fullerenes such as C₈₄ were also detected by mass spectroscopy (MS) and high performance liquid chromatography (HPLC).     

Photophysical Properties and Photoinduced Electron Transfer between[60]Fullerene—containing Cyclic Sulphoxide [C60—C60H8SO]and Tetrathiafulvalene（TTF） by Laser Flash Photolysis

Photoinduced electron transfer(PET) processes between C60-C6H8SO and Tetrathiafulvalene(TTF) have been studied by nanosecond laser photolysis.Quantrm yiekds(φet) and rate constants of electron transfer(ket) from TTF to excited triplet state of[60] fullerene-containing cyclic sulphoxide in benzonitrile(BN) have been evaluated by observing the transient absorption bands in the NIR region.With the decay of excited triplet state of [60]fullerene-containing cyclic suplhoxide,the rise of radical anion of [60]fullerene-containing cyclic sulphoxinde is observed.     

Small Cage Uranofullerenes: 27 Years after Their First Observation

The tetravalently stabilized fullerene cage of C₂₈ is historically the most elusive small fullerene cage observed by employing the laser vaporization synthesis methodology. Its first observation reported by Smalley et al. in 1992 suggests that C₂₈ is potentially the smallest and most stable fullerene ever observed. By using the Krätschmer?Huffman arc discharge synthesis method, we have recently succeeded in synthesizing a series of uranium‐endohedral fullerenes which differ from those reported by Smalley and co‐workers. Intrigued by this interesting mismatch, we tuned our experimental conditions to favor the formation and detection of these missing species. Experiments done using solvents of varying polarity allowed the observation of several empty and uranofullerenes. Extractions with pyridine and o‐DCB allowed for observation of small U@C_2n (2n=28, 60, 66, 68, 70) by high resolution Fourier‐Transform Ion Cyclotron Resonance Mass Spectrometry (FT‐ICR MS). This is the first time that U@C₂₈ is observed in soot produced by the Krätschmer‐Huffman arc‐discharge methodology. Carbon cage selection and spin density distribution on the endohedral metallofullerenes (EMFs) U@C₆₀, U@C₇₀, and U@C₇₂ were studied by means of density functional theory (DFT) calculations. A plausible pathway for the formation of U@D_3h‐C₇₄ from U@D_5h‐C₇₀ through two C₂ insertions and one Stone‐Wales rearrangement is proposed.     

Thiacalix[4]arene-porphyrin conjugates with high selectivity towards fullerene C70

Molecular tweezers based on calix[4]arene- or thiacalix[4]arene-porphyrin conjugates have been prepared starting from tetraformyl calixarenes and aminoporphyrin moieties. As proven by NMR and UV/vis titration experiments, these compounds form 1:1 complexes with C₆₀ and C₇₀ fullerenes in solution while possessing a high selectivity towards fullerene C₇₀.     

Electrochemical behavior of fullerene C60 and substituted fullerenes immobilized on an electrode surface

The effect of substituents with different donor capabilities, which are inserted into a molecule of fullerene C₆₀, on the kinetics and thermodynamics of redox conversions of fullerenes that are immobilized on an electrode, is studied for the first time. To this end, redox conversions that occur with rubbed-on films of fullerene and fulleropyrrolidines are studied using cyclic voltammetry in 0.5 M KCl/H₂O and a 0.1 M (C₄H₉)₄NBF₄/AN solution in acetonitrile. A hypothesis that the kinetics of redox conversions occurring with films of individual fullerenes is defined largely by changes in the structure of initial films in the process of their cathodic doping is used. The effect of the substituents is explained in the framework of this hypothesis by a transition from a dense crystalline structure of nonsubstituted fullerene C₆₀ to an amorphous structure of substituted fullerenes. It is demonstrated that the formal potentials corresponding to redox conversions of fullerenes in a solid cationic lipid matrix are defined by the energy of interaction of anions, which are products of reduction of fullerenes, with cations of the matrix. As a result of this interaction, the formal potentials of the process of cathodic doping shift to less negative values. It is established that the insertion of a donor substituent and increase in its donor capability amplify the energy of interaction of the fullerene anions with the lipid cations.     

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host–guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R- PAC-2 , S- PAC-2 (with Br substituents) and R- PAC-3 , S- PAC-3 (with CH₃ substituents) enantiomers. PAC-2 , rather than PAC-3 , achieves fullerene encapsulation and selective binding of C₇₀ over C₆₀ in fullerene carbon soot. More significantly, the occurrence of chiral induction between R- PAC-2 , S- PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C₇₀ selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.     

Solubility of fullerenes in n-alkanoic acids C2–C9

The solubility of fullerene C₆₀ and a fullerene mixture [C₆₀ (75%), C₇₀ (24%), C_76–80 (1%)] in linear alkanoic acids (C₂–C₉) was determined at 20°C. The solubilities of C₆₀ and a fullerene mixture in carboxylic acids were examined in relation to the number of carbon atoms in the carboxylic acid.