Polyaniline-coated magnetite nanoparticles incorporated in alginate beads for the extraction and enrichment of polycyclic aromatic hydrocarbons in water samples

A magnetic solid-phase extraction sorbent consisting of polyaniline-coated magnetite nanoparticles entrapped in alginate beads (PANI/alginate/Fe₃O₄) was successfully synthesised and applied for the extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) in water samples. The magnetite nanoparticles helped to provide an easy and rapid isolation of the sorbent from the sample solution using an external magnet. The alginate beads helped to increase the surface area for polyaniline coating. The polyaniline-coated alginate/magnetite composite helped to increase the extraction efficiency due to the π–π interactions between the polyaniline and the PAHs. Various parameters that affected the extraction efficiencies were optimised including the polymerisation time, the amount of sorbent, sample pH, extraction time, ionic strength, and desorption conditions. Under the optimal conditions, a linear response was achieved in the concentration range of 0.040–50.0 µg L^?1, and the limit of detection was 0.010 µg L^?1. This simple, convenient, cost-effective, and environmentally friendly method was successfully applied for the extraction and enrichment of PAHs in water samples. The recoveries ranged from 86.0% to 97.8% with a relative standard deviation <10 %.     

Efficient separation of nitrite from aqueous solutions by grafting metalloporphyrin on Fe3O4 nanoparticles

A new sorbent comprising 3-aminopropyltriethoxy-silane-coated magnetic nanoparticles functionalized with organic moieties containing the cobalt(III) porphyrin complex Co (TCPP) [TCPP: 4,4′,4″,4″′-(21H,23H-porphine-5,10,15,20-tetrayl)tetrakis (benzoic acid)], was prepared, for nitrite removal from drinking water. Fe₃O₄ nanoparticles were synthesized by co-precipitation of Fe²⁺ and Fe³⁺, then surface of the Fe₃O₄ nanoparticles was modified with APTES and Co (TCPP). The sorbent was characterized using FTIR, TGA, XRD, SEM and TEM analysis. The batch experiments showed that the proposed sorbent can effectively be used to remove nitrite from water. Various parameters such as pH of the solution, contact time, sorbent dosage, concentration of desorbing reagent, and influence of other interfering anions have been investigated. Under optimal conditions for a nitrite concentration of 10 mg L^?1 (i.e., contact time 15 min, pH 5.5 and nanosorbents dosage 100 mg), the percentage of the extracted nitrite ions was 92.0. Nitrite sorbing material was regenerated with 10 mM NaOH up to 97.0 %. The regeneration studies also showed that nanosorbents are regenerable and can be used for a couple of times.     

Construction of molecularly imprinted nanoparticles by employing ultrasound waves for selective determination of doxepin from human plasma samples: Modeling and optimization

In this work, molecularly imprinted nanoparticles (MINPs) were applied as selective adsorbent for ultrasound‐assisted micro‐solid‐phase extraction (UAMSPE) of doxepin (DP) from human plasma samples, which was then cleaned up, pre‐concentrated and subjected to HPLC. The MINPs were synthesized based on a non‐covalent approach by precipitation polymerization utilizing methacrylic acid and styrene as functional monomers, DP as template, ethylene glycol dimethacrylate as cross‐linker and 2,2‐azobisisobutyronitrile (AIBN) as initiator. The obtained MINPs were characterized by Fourier transform‐infrared and field emission scanning electron microscopy. Factors influencing the efficiency of UAMSPE such as sonication time, volume of eluent solvent and amount of sorbent were investigated using a central composite design and the optimal points were identified as 4 min of sonication time, 380 μL of eluent solvent and 30 mg of sorbent. Under optimized conditions, the proposed method has linear responses in the range of 0.2–2000 ng mL^–1, with a satisfactory limit of detection of 0.04 ng mL^–1 and limit of quantification of 0.11 ng mL^–1.     

Functionalized silica nanoparticles for trapping Pb2+ ions via diazo‐azomethine scaffolds

Diazo‐azomethine coated silica sorbent for the adsorption of Pb²⁺ ions has been fabricated. The sorbent was obtained by one‐pot synthesis of silica nanoparticles in the presence of diazo‐azomethine molecules possessing silatranyl side chains for grafting via covalent bond formation. The functionalized silica nanoparticles exhibited characteristic physicochemical properties of diazo‐azomethine scaffolds as determined using Fourier transform infrared spectroscopy, scanning and transmission electron microscopies and thermogravimetric analysis. Various adsorption parameters such as pH, weight of adsorbent, time taken for equilibration and recovery of lead ions were optimized using a batch method. The sorbent showed high adsorption capacity for lead ions of 460.4 mg g^?1 at pH = 4. The effect of various competing ions on the adsorption of lead ions was studied and interference was removed by using a masking agent. The sorbent can be regenerated and reused, and is compatible for the adsorption of Pb²⁺ ions from green leafy vegetables. Copyright © 2016 John Wiley & Sons, Ltd.     

Recovery and Preconcentration of Phenols from Aqueous Solutions with a Magnetic Sorbent Based on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles and Hyper-Cross-Linked Polystyrene

A procedure was suggested for recovering and concentrating phenols (phenol, 4-nitrophenol, 2-chlorophenol, and pentachlorophenol) from aqueous solution using a newly synthesized sorbent: magnetite nanoparticles modified with hyper-cross-linked polystyrene. The sorbent particle size, limiting sorption, specific surface area, and saturation magnetization were determined. A novel concentrating cartridge that ensures sorption under dynamic conditions using the magnetic sorbent was developed, and its performance was evaluated. The dynamic sorption allows quantitative recovery of phenols with a concentration factor of 530–1360.     

Porous microsphere of magnesium oxide as an effective sorbent for removal of volatile iodine from off-gas stream

Porous microspheres of magnesium oxide were synthesized by calcination of precursor obtained via hydrothermal method. A sample of microsphere was characterized by transmission electron microscopy, scanning electron microscopy–energy dispersion spectroscopy, X-ray diffraction, thermogravimetric analysis, N₂ adsorption–desorption isotherms, and BET surface area. The average pore size and surface area of the microsphere were found to be 9.0 nm and 83.1 m² g^?1, respectively. The performance of sorbent was investigated in a continuous adsorption system. Iodine adsorption on sorbent was studied by varying temperature of adsorption column, sorbent calcination temperature and initial concentration of iodine. The capacity of sorbent increased by ~25 % when calcination temperature was raised from 350 to 500 °C. The maximum iodine adsorption capacity of sorbent was found to be 196 mg g^?1 using Langmuir isotherm. These results indicate the microspherical form of MgO to be effective sorbent to capture iodine vapor from off-gas stream.     

Magnetic molecularly imprinted composite for the selective solid‐phase extraction of p‐aminosalicylic acid followed by high‐performance liquid chromatography with ultraviolet detection

A new method for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples has been developed using magnetic molecularly imprinted polymer nanoparticles before determination by high‐performance liquid chromatography. The Fe₃O₄ nanoparticles were first prepared through the chemical coprecipitation of Fe²⁺ and Fe³⁺ and then coated with a vinyl shell. Subsequently, a layer of molecularly imprinted polymers was grafted onto the vinyl‐modified magnetic nanoparticles by precipitation polymerization. FTIR spectroscopy, scanning electron microscopy, vibrating sample magnetometry, and thermogravimetric analysis were applied to characterize the sorbent properties. Moreover, the predominant parameters affecting the magnetic solid phase extraction such as sample pH, sorption and elution times, the amount of sorbent, and composition and volume of eluent were investigated thoroughly. The maximum sorption capacity of the imprinted polymer toward p‐aminosalicylic acid was 70.9 mg/g, which is 4.5 times higher than that of the magnetic nonimprinted polymer. The magnetic molecularly imprinted polymer nanoparticles were applied for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples and satisfactory results were achieved. The results illustrate that magnetic molecularly imprinted polymer nanoparticles have a great potential in the extraction of p‐aminosalicylic acid from environmental and biological matrices.     

n-Octylated Magnetic Nanoparticle-Based Microextraction for the Determination of Organophosphorus Pesticides in Water

A sensitive and simple procedure based on the dispersive solid phase extraction with hydrophobic n-octyl-modified magnetic iron oxide nanoparticles as the sorbent was developed for the determination of ethoprophos, fenchlorphos, parathion methyl, chlorpyrifos, prothiofos, and azinphos methyl in environmental water samples. Dispersive liquid–liquid microextraction was coupled with dispersive solid-phase microextraction to enhance the dispersibility of the selected sorbent and extraction efficiency. The organophosphorus pesticides were detected using gas chromatography with a flame photometric detector. Under optimized conditions, this method achieved low method detection limit (0.02–0.10 microgram per liter), wide linearity (0.5–800 microgram per liter), high enrichment factors (122–143), good correlation coefficients (r = 0.9975–0.9997), and good repeatability (0.2–7.1 percent). This method was also successfully applied to analyze drinking water and surface water with good extraction efficiency (≥82 percent) and high degree of precision (≤5 percent). The results also indicated that the dispersibility of hydrophobic magnetic nanoparticles was enhanced with liquid–liquid microextraction without chemical modification of the magnetic iron oxide nanoparticles.     

Magnetic solid‐phase extraction based on a polydopamine‐coated Fe3O4 nanoparticles absorbent for the determination of bisphenol A,tetrabromobisphenol A, 2,4,6‐tribromophenol,and (S)‐1,1’‐bi‐2‐naphthol in environmental waters by HPLC

Polydopamine‐coated Fe₃O₄ magnetic nanoparticles synthesized through a facile solvothermal reaction and the self‐polymerization of dopamine have been employed as a magnetic solid‐phase extraction sorbent to enrich four phenolic compounds, bisphenol A, tetrabromobisphenol A, (S)‐1,1′‐bi‐2‐naphthol and 2,4,6‐tribromophenol, from environmental waters followed by high‐performance liquid chromatographic detection. Various parameters of the extraction were optimized, including the pH of the sample matrix, the amount of polydopamine‐coated Fe₃O₄ sorbent, the adsorption time, the enrichment factor of analytes, the elution solvent, and the reusability of the nanoparticles sorbent. The recoveries of these phenols in spiked water samples were 62.0–112.0% with relative standard deviations of 0.8–7.7%, indicating the good reliability of the magnetic solid‐phase extraction with high‐performance liquid chromatography method. In addition, the extraction characteristics of the magnetic polydopamine‐coated Fe₃O₄ nanoparticles were elucidated comprehensively. It is found that there are hydrophobic, π–π stacking and hydrogen bonding interactions between phenols and more dispersible polydopamine‐coated Fe₃O₄ in water, among which hydrophobic interaction dominates the magnetic solid‐phase extraction performance.     

Magnetic solid‐phase extraction method for extraction of some pesticides in vegetable and fruit juices

A new version of magnetic solid‐phase extraction performed in a narrow‐bore tube has been proposed for the extraction and preconcentration of different pesticides from various vegetable and fruit juices followed by gas chromatography. A few milligrams of C₈@SiO₂@Fe₃O₄ nanoparticles are added into an aqueous sample solution placed in a narrow‐bore tube. The sorbent particles move down through the tube under gravity and are collected at the end of the tube by applying an external magnetic field. The end of the tube is narrower and it is connected to a stopcock. After a predetermined time, the stopcock is opened and the solution is passed through the bed of the sorbent maintained by the magnet. Then the adsorbed analytes are desorbed using an elution solvent. To achieve high enrichment factors, a dispersive liquid–liquid microextraction method is carried out. The nanoparticles were characterized by scanning electron microscopy, X‐ray diffraction, and FTIR spectroscopy. Under the optimum extraction conditions, limits of detection and quantification were in the ranges of 0.1–0.3 and 0.3–0.9 μg/L, respectively. High enrichment factors (1166–1605) and good extraction recoveries (58–80%) were obtained.     

Development of air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent‐mediated Fe3O4@Cu–Fe–LDH for the determination of tramadol in biological samples

A simple method, air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent was developed for the preconcentration of tramadol in biological samples prior to gas chromatography–flame ionization detection. A new type of carrier liquid, supramolecular solvent based on a mixture of 1‐dodecanol and tetrahydrofuran was combined with layered double hydroxide coated on a magnetic nanoparticle (Fe₃O₄@SiO₂@Cu–Fe–LDH). The supramolecular solvent was injected into the solution containing Fe₃O₄@SiO₂@Cu–Fe–LDH in order to provide high stability and dispersion of the sorbent without any stabilizer agent. Air assisted was applied to enhance the dispersion of the sorbent and solvent. A number of analytical techniques such as Fourier transform‐infrared spectrometry, field emission scanning electron microscope, energy‐dispersive X‐ray spectroscopy and X‐ray diffraction measurements were applied to assess the surface chemical characteristics of Fe₃O₄@SiO₂@Cu–Fe–LDH nanoparticles. The effects of important parameters on the extraction recovery were also investigated. Under optimized conditions, the limits of detection and quantification were obtained in the range of 0.9–2.4 and 2.7–7.5 μg L^?1 with preconcentration factors in the range of 450–472 in biological samples. This method was used for the determination of tramadol in biological samples (plasma, urine and saliva samples) with good recoveries.     

Development of solid-phase extraction method for the determination of aromatic sensitisers in paper mill effluent

In this paper, a procedure for the determination of 11 aromatic hydrocarbon-type sensitisers and their related compounds from water samples, used in the manufacture of thermal paper, is presented. The compounds were extracted using a solid-phase extraction (SPE) cartridge with an octadecyl (C18) or a phenyl-bonded silica (PH) sorbent and then determined by gas chromatography–mass spectrometry (GC–MS). Factors affecting the performance of the extraction steps were thoroughly evaluated, and their effects on the yield of the sample preparation were discussed. Under optimised experimental conditions, SPE cartridges were conditioned with 10?mL hexane followed subsequently by 10?mL methanol, loaded with water sample at 2?mL?min^?1, and eluted with 10?mL hexane at 1.5?mL?min^?1. The limits of detection and quantification, calculated for signal-to-noise ratios of 3 and 10, were in the range of 1–5?µg?L^–1 and 2.5–10?µg?L^–1, respectively. Recovery yields of the present method using river water were in the range of 88%–112% with a C18 sorbent and 86%–116% with a PH sorbent. The repeatability, expressed as a relative standard deviation, was in the range of 2.8%–11% with a C18 sorbent and 0.7%–9.7% with a PH sorbent (n?=?4). Analysis of paper mill effluents revealed the presence of aromatic hydrocarbon-type sensitisers with maximum concentrations of up to 5.2?µg?L^?1.     

Magnetic titanium oxide nanoparticles for hemimicelle extraction and HPLC determination of organophosphorus pesticides in environmental water

We report on a method for the extraction of organophosphorus pesticides (OPPs) from water samples using mixed hemimicelles and magnetic titanium dioxide nanoparticles (Fe₃O₄@TiO₂) modified by cetyltrimethylammonium. Fe₃O₄@TiO₂ nanoparticles were synthesized by a hydrothermal process and then characterized by scanning electron microscopy and Fourier transform IR spectrometry. The effects of the quantity of surfactant, extraction time, desorption solvent, pH value, extraction volume and reuse of the sorbent were optimized with respect to the extraction of OPPs including chlorpyrifos, dimethoate, and trichlorfon. The extraction method was applied to analyze OPPs in environmental water using HPLC along with UV detection. The method has a wide linear range (100–15,000 ng L^?1), good linearity (r?>?0.999), and low detection limits (26–30 ng L^?1). The enrichment factor is ~1,000. The recoveries (at spiked levels of 100, 1,000 and 10,000 ng L^?1) are in the range of 88.5–96.7 %, and the relative standard deviations range from 2.4 % to 8.7 %.

Extraction of phenolic compounds from water samples by dispersive micro‐solid‐phase extraction

In this article, the use of magnetically separable sorbent polyaniline/silica‐coated nickel nanoparticles is evaluated under a dispersive micro‐solid‐phase extraction approach for the extraction of phenolic compounds from water samples. The sorbent was prepared by in situ chemical polymerization of aniline on the surface of silica‐modified nickel nanoparticles and was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, X‐ray powder diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectrometry, and vibrating sample magnetometry. Effective variables such as amount of sorbent (milligrams), pH and ionic strength of sample solution, volume of eluent solvent (microliters), vortex, and ultrasonic times (minutes) were investigated by fractional factorial design. The significant variables optimized by a Box–Behnken design were combined by a desirability function. Under the optimized conditions, the calibration graphs of analytes were linear in a concentration range of 0.02–100 μg/mL, and with correlation coefficients more than 0.999. The limits of detection and quantification were in the ranges of 10–23 and 33–77 μg/L, respectively. This procedure was successfully employed in the determination of target analytes in spiked water samples; the relative mean recoveries ranged from 96 to 105%.     

Sorption of thallium(III) ions from aqueous solutions using titanium dioxide nanoparticles

Titanium dioxide nanoparticles (NPs) were employed for the sorption of Tl(III) ions from aqueous solution. The process was studied in detail by varying the sorption time, pH, Tl(III) concentration, temperature, and amount of sorbent. The sorption was found to be fast and to reach equilibrium within 2 min, to be less efficient at low pH values, and to increase with pH and temperature. The sorption fits the Langmuir equation and follows a pseudo second order model. The mean energy of the sorption is approximately 15 kJ mol^?1 as calculated from the Dubinin–Radushkevich isotherm. The thermodynamic parameters for the sorption were also determined, and the ΔH ⁰ and ΔG ⁰ values indicate endothermic behavior.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy–MWCNT nanocomposite and its application for extraction of ultra-trace amounts of PAHs from various samples

In the present study, multi-walled carbon nanotube oxide was immobilized on the pyrrole magnetic nanoparticles. Application of the synthesized material was investigated for the magnetic solid-phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs), from the environmental samples. Determinations of the analytes were performed with gas chromatography–mass spectrometry. The structure and morphology of Fe₃O₄@PPy–MWCNT were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer. Performance of MSPE is mainly affected by extraction time, sorbent amount, sample solution volume, and eluent type and volume. In this study, the best possible performance of MSPE has been achieved using a combination of central composite design and Bayesian regularized artificial neural network technique. Under the optimum extraction conditions, linear range between 0.5 and 250 µg L^?1 (R ² > 0.994), preconcentration factors from 232 to 403 and limits of detection ranging from 0.1 to 0.3 µg L^?1 were obtained. Relative standard deviations for intra-day and inter-day precision were 3.3–5.1% and 3.7–5.6%, respectively. In addition, feasibility of the method was demonstrated by extraction and determination of PAHs from some real samples containing tap water, hookah water as well as soil samples, and relative recovery in the range of 85.4–106.8% was obtained. This MSPE method provides several advantages, such as high extraction efficiency, minimum sorbent for extraction of the analytes from high sample volumes, convenient extraction procedure, and short analysis times.     

Molecularly imprinted polymeric shell coated monodisperse‐porous silica microspheres as a stationary phase for microfluidic boronate affinity chromatography

Molecular imprinting of cis‐diol functionalized agents via boronate affinity interaction has been usually performed using nanoparticles as a support which cannot be utilized as a stationary phase in continuous microcolumn applications. In this study, monodisperse‐porous, spherical silica particles in the micron‐size range, with bimodal pore diameter distribution were selected as a new support for the synthesis of a molecularly imprinted boronate affinity sorbent, using a cis‐diol functionalized agent as the template. A specific surface area of 158 m²/g was achieved with the imprinted sorbent by using monodisperse‐porous silica microspheres containing both mesoporous and macroporous compartments as the support. High porosity originating from the macroporous compartment and sufficiently high particle size provided good column permeability to the imprinted sorbent in microcolumn applications. The mesoporous compartment provided a large surface area for the parking of imprinted molecules while the macroporous compartment facilitated the intraparticular diffusion of imprinted target within the microsphere interior. A microfluidic boronate affinity system was first constructed by using molecularly imprinted polymeric shell coated monodisperse‐porous silica microspheres as a stationary phase. The synthetic route for the imprinting process, the reversible adsorption/ desorption behavior of selected target and the selectivity of imprinted sorbent in both batch and microfluidic boronate affinity chromatography systems are reported.     

Determination of Pyrethroid Pesticides in Environmental Waters Based on Magnetic Titanium Dioxide Nanoparticles Extraction Followed by HPLC Analysis

A simple and fast method based on magnetic separation for extraction of pyrethroid pesticides including beta-cyfluthrin, cyhalothrin and cyphenothrin from environmental water samples has been established. Magnetic titanium dioxide was used as sorbent, which was synthesized by coating TiO₂ on Fe₃O₄ in liquid-state co-precipitation method. The sorbent has been characterized by scanning electron microscopy and Fourier-transform infrared spectrometry, and the magnetic properties were investigated with physical property measurement system. Various parameters affecting the extraction efficiency were evaluated to achieve optimal condition and decrease ambiguous interactions. The analytes desorbed from the sorbent were detected by high performance liquid chromatography. Under the optimal condition, the linearity of the method is in the range of 25–2,500 ng L^?1. The detection limits and quantification limits of pyrethroid pesticides are in the range of 2.8–6.1 ng L^?1 and 9.3–20.3 ng L^?1, respectively. The relative standard deviations of intra- and inter-day tests ranging from 2.5 to 7.2 % and from 3.6 to 9.1 % were obtained. In all three spiked levels (25, 250 and 2,500 ng L^?1), the recoveries of pyrethroid pesticides were in the range of 84.5–94.1 %. The proposed method was successfully applied to determine pyrethroids in three water samples. Cyphenothrin was found in one river water near farmlands, and its concentration was 52 ng L^?1.     

Magnetic solid-phase extraction using Schiff base ligand supported on magnetic nanoparticles as sorbent combined with dispersive liquid-liquid microextraction for the extraction of phenols from water samples

ABSTRACT

In this work, the magnetic sorbent was developed by covalent binding of a Schiff base ligand, N,N’-bis(3-salicyliden aminopropyl)amine (salpr), on the surface of silica coated magnetic nanoparticles (Salpr@SCMNPs). The core-shell nanoparticle was applied for the magnetic solid-phase extraction (MSPE) combined with dispersive liquid-liquid microextraction (DLLME) of phenolic compounds from water samples prior to gas chromatography-flame ionisation detector (GC?FID). Characterisation of the Salpr@SCMNPs was performed with different physicochemical methods such as Fourier transform infrared (FT-IR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). Variables affecting the performance of both extraction steps such as pH of the water sample, the sorbent amount, the desorption conditions, the extraction time; and extraction solvent were studied. Under the optimised conditions, the analytical performances were determined with a linear range of 0.01–100 ng mL^?1 and a limit of detection at 0.003–0.02 ng mL^?1 for all of the analytes studied. The intra-day (n = 5) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 6.9–8.9% and 7.3–10.1%, respectively. The proposed method was executed for the analysis of real water samples, whereby recoveries in the range of 92.9–99.0% and RSD% lower than 6.1% were attained.     

Recovery and determination of palladium from its alloys using iminodiacetic polyurethane/carbon nanofibers sorbent

New sorbent was synthesized by coupling iminodiacetic polyurethane foam with carbon nanofibers to increase its surface area and sorption capacity. FTIR, UV/Vis, Raman spectroscopy, elemental analysis, and scanning electron microscopy were used to characterize the IDAPUF/CNFs sorbent. By using these techniques, it was found that the sorbent contains 0.58, 0.62, and 2.23 mmol g^?1 of amino, carboxylic, and phenolic groups, respectively. The maximum sorption (99–100%) of palladium(II) ions onto IDAPUF/CNFs was achieved within 10–15 min at pH 5.0. A perfect isotherm curve with a zero intercept (0.0003) and good correlation (R² = 1) was obtained. The capacity of the IDAPUF/CNFs sorbent preloaded onto a glass column was calculated to be 0.58 mmol g^?1. The values of LOD, LOQ, and RSD% (n = 6) are 0.004 ng mL^?1, 0.013 ng mL^?1, and 1.17%, respectively. The accuracy of the procedure was verified by the recovery of Pd(II) ions (100%) from some palladium alloys and road dust samples (RSD% = 0.36).