Equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures at temperatures from (278.15 to 323.15) K

The equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures was measured at elevated temperatures from (278.15 to 323.15) K using a steady-state method. With increasing temperatures, the solubility increases in aqueous solvent mixtures. The results of these results were regressed by a modified Apelblat equation. The dissolution entropy and enthalpy determined using the method of the least-squares and the change of Gibbs free energy calculated with the values of Δ_diffS^o and Δ_diffH^o at T = 278.15 K.     

Thermodynamic features associated with intercalation of some n-alkylmonoamines into barium phosphate

Elemental analysis for the synthesized crystalline lamellar compound conforms to the formula Ba(H₂PO₄)₂ and the X-ray diffraction patterns is in agreement with the lamellar structure for this compound. The precursor host was intercalated with a series of n-alkylmonoamines of the general formula H₃C(CH₂)_n-NH₂ (n = 1 to 4) in aqueous solution. The lamellar host was calorimetrically titrated with an aqueous amine solution at T = (298.15 ± 0.02) K and the enthalpy, Gibbs free energy and entropy were calculated. The enthalpic values increased, although not uniformly, with the number of carbon atoms is the amine chain, to give (−13.96 ± 0.12, −14.00 ± 0.48, −15.75 ± 0.23, −16.05 ± 0.11) kJ · mol⁻¹, from n = 1 to 4. The exothermic enthalpy, the negative Gibbs free energy and positive entropic values are in agreement with the favourable energetic process of intercalation for this system.     

Hydrogen-bond transition from the vibration mode of ordinary water to the (H,Na)I hydration states: Molecular interactions and solution viscosity

With the aid of differential phonon spectrometrics (DPS) and surface stress detection, we show that HI and NaI solvation transforms different fractions of the HO stretching phonons from the mode of ordinary water centred at ∼3200 to the mode of hydration shell at ∼3500 cm⁻¹. Observations suggest that an addition of the H ↔ H anti-hydrogen-bond to the Zundel notion, [H(H₂O)₂]⁺, would be necessary as the HO bond due H₃O⁺ has a 4.0 eV energy, and the H ↔ H fragilization disrupts the solution network and the surface stress. The I⁻ and Na⁺ ions form each a charge centre that aligns, stretches, and polarize the O:HO bond, resulting in shortening the HO bond and its phonon blue shift in the hydration shell or at the solute-solvent interface. The solute capabilities of bond-number-fraction transition follow: f_H = 0, f_Na ∝ C, and f_I ∝ 1 − exp(−C/C₀) toward saturation, with C being the solute molar concentration and C₀ the decay constant. The f_H = 0 evidences the non-polarizability of the H⁺ because of the H ↔ H formation. The linear f_Na(C) suggests the invariance of the Na⁺ hydration shell size because of the fully-screened cationic potential by the H₂O dipoles in the hydration shell but the nonlinear f_I(C) fingerprints the I⁻ ↔ I⁻ interactions at higher concentrations. Concentration trend consistency between Jones–Dole’s viscosity and the f_NaI(C) coefficient may evidence the same polarization origin of the solution viscosity and surface stress.     

Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)

The vapour pressures of liquid (3-diethylaminopropylamine (3-DEPA) + n-heptane) mixtures were measured by a static method between T = (303.15 and 343.15) K at 10 K intervals. The molar excess enthalpies H^E at T = 303.15 K were measured for the systems {3-DEPA + C_nH_2n+2 (n = 6, 7, 12)}. The molar excess Gibbs free energies G^E were obtained with Barker’s method and fitted to the Redlich–Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G^E and H^E, by using group contribution UNIFAC (Gmehling version) model, were evaluated.     

A novel design of a temperature-controlled FT-ICR cell for low-temperature black-body infrared radiative dissociation (BIRD) studies of hydrated ions

A novel design for a temperature-controlled ICR cell is described for use in black-body infrared radiative dissociation (BIRD) studies of weakly bound systems like water clusters. Due to several improved design features, it provides a very uniform black-body radiation environment, and at the same time maintains efficient pumping for a low collision rate on the order of 10^?2 s^?1. At the lowest temperatures reached, nominally 89 K cell plate temperature, water evaporation effectively ceases, while intracluster reactions in V⁺(H₂O)_n with a small activation energy are still observed. BIRD rate constants for Ag⁺(H₂O)_n, n = 4–6, are shown in the temperature range T = 160–320 K. For n = 6, a linear Arrhenius plot with R² = 0.9943 is obtained without any calibration, confirming the suitability of the cell for quantitative BIRD studies.     

Thermodynamics of the ternary systems: (water + glycine,l-alanine and l-serine + di-ammonium hydrogen citrate) from volumetric,compressibility, and (vapour + liquid) equilibria measurements

The apparent molar volumes and isentropic compressibility of glycine, l-alanine and l-serine in water and in aqueous solutions of (0.500 and 1.00) mol · kg^?1 di-ammonium hydrogen citrate {(NH₄)₂HCit} and those of (NH₄)₂HCit in water have been obtained over the (288.15 to 313.15) K temperature range at 5 K intervals at atmospheric pressure from measurements of density and ultrasonic velocity. The apparent molar volume and isentropic compressibility values at infinite dilution of the investigated amino acids have been obtained and their variations with temperature and their transfer properties from water to aqueous solutions of (NH₄)₂HCit have also been obtained. The results have been interpreted in terms of the hydration of the amino acids. In the second part of this work, water activity measurements by the isopiestic method have been carried out on the aqueous solutions of {glycine + (NH₄)₂HCit}, {alanine + (NH₄)₂HCit}, and {serine + (NH₄)₂HCit} at T = 298.15 K at atmospheric pressure. From these measurements, values of vapour pressure, osmotic coefficient, activity coefficient and Gibbs free energy were obtained. The effect of the type of amino acids on the (vapour + liquid) equilibrium of the systems investigated has been studied. The experimental water activities have been correlated successfully with the segment-based local composition Wilson model. Furthermore, the thermodynamic behaviour of the ternary solutions investigated has been studied by using the semi-ideal hydration model and the linear concentration relations have been tested by comparing with the isopiestic measurements for the studied systems at T = 298.15 K.     

Temperature and salt addition effects on the solubility behaviour of some phenolic compounds in water

Solubility-temperature dependence data for six phenolic compounds (PhC), contained in olive mill wastewater (OMWW), in water and in some chloride salts (KCl, NaCl, and LiCl) aqueous solutions have been presented and solution standard molar enthalpies (Δ_solH^∘) were determined using Van’t Hoff plots. The temperature was varied from 293.15 K to 318.15 K. Solubility data were estimated using a thermostated reactor and HPLC analysis. It has been observed that solubility, in pure water and in aqueous chloride solutions, increases with increasing temperature. The salting-out LiCl > NaCl > KCl order obtained at 298.15 K is confirmed. Results were interpreted in terms of the salt hydration shells and the ability of the solute to form hydrogen-bond with water. The standard molar Gibbs free energies of transfer of PhC (Δ_trG^∘) from pure water to aqueous solutions of the chloride salts have been calculated from the solubility data. In order to estimate the contribution of enthalpic and entropic terms, standard molar enthalpies (Δ_trH^∘) and entropies (Δ_trS^∘) of transfer have also been calculated. The decrease in solubility is correlated to the positive Δ_trG^∘ value which is mainly of enthalpic origin.     

Thermodynamics of the hydrolysis reactions of adenosine 3′,5′-(cyclic)phosphate(aq) and phosphoenolpyruvate(aq); the standard molar formation properties of 3′,5′-(cyclic)phosphate(aq) and phosphoenolpyruvate(aq)

Molar calorimetric enthalpy changes Δ_rH_m(cal) have been measured for the biochemical reactions {cAMP(aq) + H₂O(l)=AMP(aq)} and {PEP(aq) + H₂O(l)=pyruvate(aq) + phosphate(aq)}. The reactions were catalyzed, respectively, by phosphodiesterase 3^′,5^′-cyclic nucleotide and by alkaline phosphatase. The results were analyzed by using a chemical equilibrium model to obtain values of standard molar enthalpies of reaction Δ_rH_m^∘ for the respective reference reactions {cAMP⁻(aq) + H₂O(l)=HAMP⁻(aq)} and {PEP³⁻(aq) + H₂O(l)=pyruvate⁻(aq) + HPO²⁻₄(aq)}. Literature values of the apparent equilibrium constants K^′ for the reactions {ATP(aq)=cAMP(aq) + pyrophosphate(aq)}, {ATP(aq) + pyruvate(aq)=ADP(aq) + PEP(aq)}, and {ATP(aq) + pyruvate(aq) + phosphate(aq)=AMP(aq) + PEP(aq) + pyrophosphate(aq)} were also analyzed by using the chemical equilibrium model. These calculations yielded values of the equilibrium constants K and standard molar Gibbs free energy changes Δ_rG_m^∘ for ionic reference reactions that correspond to the overall biochemical reactions. Combination of the standard molar reaction property values (K, Δ_rH_m^∘, and Δ_rG_m^∘) with the standard molar formation properties of the AMP, ADP, ATP, pyrophosphate, and pyruvate species led to values of the standard molar enthalpy Δ_fH_m^∘ and Gibbs free energy of formation Δ_fG_m^∘ and the standard partial molar entropy S_m^∘ of the cAMP and PEP species. The thermochemical network appears to be reasonably well reinforced and thus lends some confidence to the accuracy of the calculated property values of the variety of species involved in the several reactions considered herein.     

Comment on the possible role of the reaction H+H2O→H2+OH in the radiolysis of water at high temperatures

In a recent paper (Radiation Physics and Chemistry, 2005, vol. 74, pp. 210) it was suggested that the anomalous increase of molecular hydrogen radiolysis yields observed in high-temperature water is explained by a high activation energy for the reaction H+H₂O→H₂+OH. In this comment we present thermodynamic arguments to demonstrate that this reaction cannot be as fast as suggested. A best estimate for the rate constant is 2.2×10³ M⁻¹ s⁻¹ at 300 °C. Central to this argument is an estimate of the OH radical hydration free energy vs. temperature, ΔG_hyd(OH)=0.0278t−18.4 kJ/mole (t in °C, equidensity standard states), which is based on analogy with the hydration free energy of water and of hydrogen peroxide.     

Experimental measurement and thermodynamic modelling of phase equilibria of semi-clathrate hydrates of (CO2 + tetra-n-butyl-ammonium bromide) aqueous solution

Comprehensive studies on semi-clathrate hydrates phase equilibria are still required to better understand characteristics of this type of clathrates. In this communication, new experimental data on the dissociation conditions of semi-clathrate hydrates of {carbon dioxide + tetra-n-butyl-ammonium bromide (TBAB)} aqueous solution are first reported in a wide range of TBAB concentrations and at different pressures and temperatures. A thermodynamic model is then proposed to predict the dissociation conditions of the semi-clathrate hydrates for the latter system. The (hydrate + TBAB) aqueous solution (H + L_w) phase equilibrium prediction is considered based on Gibbs free energy minimization approach. A modified van der Waals–Platteeuw solid solution theory developed based on the (H + L_w) equilibrium information is employed to predict the dissociation conditions of semi-clathrate hydrates of carbon dioxide + TBAB. The properties of the aqueous solution are estimated using the AMSA-NRTL electrolyte model (considering the association and hydration of ions). The Peng–Robinson equation of state is used for estimating the gas/vapour phase properties. Results show that the proposed model satisfactorily predicts the experimental values with an average absolute relative deviation of approximately 13%.     

(Liquid + liquid) equilibrium of aqueous biphasic systems composed of 1-benzyl or 1-hexyl-3-methylimidazolium chloride ionic liquids and inorganic salts

(Liquid + liquid) equilibria for {1-benzyl-3-methylimidazolium chloride ([BzMIM]Cl) or 1-hexyl-3-methylimidazolium chloride ([HMIM]Cl) + inorganic salts (potassium phosphate K₃PO₄, potassium carbonate K₂CO₃, or dipotassium hydrogen phosphate K₂HPO₄) + H₂O} aqueous biphasic systems (ABSs) are presented at T = 298.15 K. An empirical equation was used to correlate the binodal data. The experimental tie lines were appropriately correlated by the Othmer–Tobias and Brancroft empirical equations. The influence of the selected inorganic salts in the phase segregation was investigated by means the calculated effective excluded volume (EEV) and Setschenow-type equation. The salting-out ability of salts was also evaluated in terms of the Gibbs energy of hydration of salt (ΔG_hyd) and assessed with EEV values.     

Voltammetric study on the mechanism of ion transfer caused by weak acids in the bilayer lipid membrane

The mechanism has been investigated by cyclic voltammetry for the ion transfer from one aqueous phase (W1) to another (W2) across a bilayer lipid membrane (BLM) in the presence of a typical uncoupler, carbonylcyanide p-trifluoromethoxyphenylhydrazone (FCCP). Voltammograms for the ion transfer were in steady-state and showed rotated sigmoidal and symmetrical shape about the origin (0 V, 0 A). The magnitude of the ion transfer current at a given applied potential increased linearly with the concentration of FCCP in W2 up to 10⁻⁶ M and then became saturated. The ion transfer current also showed a bell-type dependence on pH centered around pH ≅ pK_a + 1, K_a being the dissociation constant of FCCP in aqueous phase. These properties have been well explained by our proposed model that the ion transfer current is attributable to the transfers of H⁺ and Na⁺ distributed in BLM. The hydrophilic counter ions, H⁺ and Na⁺, compensate the negative charge of the dissociated FCCP in BLM. The current intensity is predominantly governed by the concentration and the ion mobility of the counter cations.     

Sodium salt effect on aqueous solutions containing Tween 20 and Triton X-102

The effect of six different high charge density sodium inorganic salts, such as Na₂CO₃, Na₂SO₄, Na₂S₂O₃, Na₂SO₃, Na₂HPO₄ and NaCH₃COO, in aqueous solutions of two anionic surfactants Tween 20 and Triton X-102 was investigated at T = 298.15 K and atmospheric pressure. The results were qualitatively analyzed in the light of the Hofmeister series. Also, a quantitative thermodynamic analysis in terms of molar Gibbs free energy of hydration (Δ_hydG) was carried out. The Merchuck equation was used to correlate the solubility curves and the tie line data were modelled by applying the Othmer–Tobias and Bancroft equations.     

On the phase behaviour of polyethoxylated sorbitan (Tween) surfactants in the presence of potassium inorganic salts

The salting out potential of potassium-based inorganic salts was assessed in aqueous solutions of two non-ionic surfactants from the Tween family. New solubility data of the systems {surfactant (Tween 20/Tween 80) + inorganic salt (K₃PO₄/K₂CO₃/K₂HPO₄/K₂S₂O₃/K₂SO₃) + H₂O} were experimentally ascertained at T = 298.15 K and these data were correlated by means of several three and four parameters empirical equations. Tie-line data were determined for the aqueous ternary systems and Ohtmer-Tobias and Bancroft equations have been proposed to correlate these data. The phase segregation effect of the proposed salts was investigated and compared with the sequence indicated by the Hofmeister series and the molar Gibbs energy of hydration (Δ_hydG) data.     

Thermodynamic study of the mixed system (CsCl + CaCl2 + H2O) by EMF Measurements at T = 298.15 K

This work reports the results of a thermodynamic investigation of the ternary mixed-electrolyte system (CsCl + CaCl₂ + H₂O). The activity coefficients of this mixed aqueous electrolyte system have been studied with the electromotive force measurement (EMF) of the cell: Cs ion-selective electrode (ISE)|CsCl(m_A), CaCl₂(m_B), H₂O|Ag/AgCl at T = 298.15 K and over total ionic strengths from (0.01 to 1.50) mol · kg^?1 for different ionic strength fractions y_B of CaCl₂ with y_B = (0, 0.2, 0.4, 0.6, and 0.8). The cesium ion-selective electrode (Cs-ISE) and the Ag/AgCl electrode used in this work were made in our laboratory and had a good Nernst response. The experimental results obey the Harned rule, and the Pitzer model can be used to describe this ternary system satisfactorily. The osmotic coefficients, excess Gibbs free energies and activities of water of the mixtures were also calculated.     

Thermodynamic properties of multicomponent electrolyte solutions in mixed solvents {HCl + NaCl-tert-C4H9OH + H2O} at (278.15 to 318.15) K

The thermodynamic properties of (HCl (m_A) + NaCl (m_B)-tert-C₄H₉OH + H₂O) system were studied by means of e.m.f. measurements in the cell without liquid junction at constant total ionic strength I=1.00 mol · kg⁻¹ from 278.15 K to 318.15 K. The standard electrode potential of Ag–AgCl and activity coefficient of HCl in the mixed solvents have been determined. The results show that the activity coefficient of HCl in HCl–NaCl solution still obeys Harned’s Rule and the logarithm of HCl activity coefficient, lgγ_A, is a linear function reciprocal of temperature at constant composition of the mixture. The standard transfer Gibbs free energy of HCl was calculated.     

Gas phase dissociation of H2SO4: A computational study

The decomposition of gaseous sulfuric acid has been investigated computationally. In particular the role of the hydrated gaseous coordination adducts of SO₃(g) and H₂SO₄(g) in the (dissociation + decomposition) process has been evaluated. A first principles study of the gaseous coordination complexes SO₃(H₂O)_n (n = 1 to 3) and H₂SO₄(H₂O)_m (m = 1 to 2) has been carried out deriving equilibrium ground state structures, vibrational frequencies and energetic stabilities by the Moller–Plesset perturbation approximation. These results have been used to derive the enthalpy of formation at 0 K and the Gibbs energy functions of these molecules. A new thermodynamic modeling of the decomposition of H₂SO₄(g) has been therefore performed considering the effect of temperature, pressure and initial composition of the gas (hydration conditions).     

Thermodynamic properties of soddyite from solubility and calorimetry measurements

The release of uranium from geologic nuclear waste repositories under oxidizing conditions can only be modeled if the thermodynamic properties of the secondary uranyl minerals that form in the repository setting are known. Toward this end, we synthesized soddyite ((UO₂)₂(SiO₄)(H₂O)₂), and performed solubility measurements from both undersaturation and supersaturation. The solubility measurements rigorously constrain the value of the solubility product of synthetic soddyite, and consequently its standard-state Gibbs free energy of formation. The log solubility product (lg K_sp) with its error (1σ) is (6.43 + 0.20/−0.37), and the standard-state Gibbs free energy of formation is (−3652.2 ± 4.2 (2σ)) kJ mol⁻¹. High-temperature drop solution calorimetry was conducted, yielding a calculated standard-state enthalpy of formation of soddyite of (−4045.4 ± 4.9 (2σ)) kJ · mol⁻¹. The standard-state Gibbs free energy and enthalpy of formation yield a calculated standard-state entropy of formation of soddyite of (−1318.7 ± 21.7 (2σ)) J · mol⁻¹ · K⁻¹. The measurements and associated thermodynamic calculations not only describe the T = 298 K stability and solubility of soddyite, but they also can be used in predictions of repository performance through extrapolation of these properties to repository temperatures.     

(Vapour + liquid) equilibria and excess molar enthalpies for mixtures with strong complex formation. Trichloromethane or 1-bromo-1-chloro-2,2,2-trifluoroethane (halothane) with tetrahydropyran or piperidine

Isothermal (vapour  +  liquid) equilibria were measured for (trichloromethane  +  tetrahydropyran or piperidine) at T =  333.15 K and {1-bromo-1-chloro-2,2,2-trifluoroethane (halothane)  +  tetrahydropyran or piperidine} atT =  323.15 K with a circulation still. The results were verified by effective statistical procedures and used to calculate activity coefficients and excess molar Gibbs free energiesG_m^E . Excess molar enthalpiesH_m^E for these mixtures were determined at T =  298.15 K by means of an isothermal CSC microcalorimeter equipped with recently reconstructed flow mixing cells. Reliable performance of the calorimetric setup was proved by the good agreement of H_m^Efor (hexane  +  cyclohexane), (2-propanone  +  water), and (methanol  +  water), with the best literature results. The trichloromethane- or halothane-containing mixtures exhibit strong negative deviations from Raoult’s law and are highly exothermic, thus indicating that complex formation via hydrogen bonding is a governing nonideality effect. A close similarity in the behaviour of corresponding mixtures with trichloromethane and halothane is observed, but for halothane-containing mixtures,G_m^E and H_m^Eare consistently more negative, confirming that halothane is a more powerful proton donor than chloroform.