共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
研究了具有高比表面积稻壳基多孔炭(简称RHC)对人体内代谢产物肌酐(简称CR)的吸附, 将采用氢氧化钠活化稻壳制备的四种多孔炭和二种商业活性炭对肌酐的吸附进行了对比, 同时考察了盐酸、硝酸和双氧水对多孔炭进行表面处理及其经过高温处理(800 ℃)后对肌酐的吸附. 结果表明稻壳基多孔炭对肌酐的吸附超过商业炭,经过表面处理后多孔炭的吸附能力增强, 无氧化性盐酸处理后的多孔炭对肌酐的吸附量最大, 氧化性最强的硝酸处理后的多孔炭对肌酐的吸附量最小, 双氧水居中, 高温处理后的多孔炭吸附能力有所降低. 实验证实了多孔炭对CR的吸附符合Freundlich方程. 相似文献
3.
4.
以纳米碳酸钙为模板,水稻秸秆为碳前驱体,采用共热解法制备了负载氯的分级多孔生物质炭。在模拟烟气条件下,利用固定床实验台架研究了生物质碳材料对烟气中的单质汞(Hg0)的脱除性能。采用扫描电镜(SEM)、透射电镜(TEM)、N2吸附-脱附(BET)、程序升温脱附(Hg-TPD)以及X射线光电子能谱(XPS)等方法对材料进行表征。结果表明,盐酸浸渍不仅可去除模板产物生成多孔结构,并且有效地将氯负载到材料表面。负载氯的分级多孔炭B1C1-Cl2的比表面积和总孔容分别达到398.1 m2/g和0.4923 cm3/g。在120℃,空速(GHSV)为225000 h-1时,脱汞效率可达95%。多孔结构有利于气体扩散,高比表面积为材料提供了更多的反应位点,微孔-介孔内表面上的C-Cl共价键为脱汞的主要化学吸附活性位点。 相似文献
5.
多阶有序多孔炭材料综合了多种多孔炭材料的结构优点,在催化、吸附、储能、电化学等方面具有潜在的重要应用。多阶有序多孔炭材料的合成方法很多,到目前为止,模板法是控制孔结构和调节尺寸的最有效方法。在模板法中,软模板法因为其工艺简单、省时、成本低、环境污染小等优势,近些年来广泛被人们采用。用软模板法合成的多阶有序多孔炭包括:大孔-介孔炭,介孔-微孔炭,介孔-介孔炭,大孔-介孔-微孔炭等。本文对多阶有序多孔炭的软模板法合成与结构控制进行了综述。总结了软模板法在实现上述材料孔结构控制中的影响因素。 相似文献
6.
以冷冻干燥获得的多孔胡萝卜为炭源,经过600℃氮气氛围下炭化和KOH活化,获得了多孔结构的炭材料。采用红外光谱、X-射线粉末衍射、扫描电镜、透射电镜、循环伏安、恒流充放电和交流阻抗对多孔炭进行了微结构和电容性能研究。结果表明:通过活化处理,多孔炭的比表面积从7m2·g-1大幅提高到147m2·g-1。而且,活化后的多孔炭产生了414F·g-1的最大比电容,且电流增至4A·g-1时的电容保持率为74.5%。而未活化的多孔炭最大电容为253F·g-1,电容保持率仅为45.1%。此外,活化后的多孔炭还具有优异的电化学稳定性。在5A·g-1电流下循环8000圈后,其电容保持率高达94%。活化后的多孔炭在电容性能方面的极大改善与其比表面积的大幅提高及介孔的增多有密切关系。 相似文献
7.
以冷冻干燥获得的多孔胡萝卜为炭源,经过600℃氮气氛围下炭化和KOH活化,获得了多孔结构的炭材料。采用红外光谱、X-射线粉末衍射、扫描电镜、透射电镜、循环伏安、恒流充放电和交流阻抗对多孔炭进行了微结构和电容性能研究。结果表明:通过活化处理,多孔炭的比表面积从7 m2·g-1大幅提高到147 m2·g-1。而且,活化后的多孔炭产生了414 F·g-1的最大比电容,且电流增至4 A·g-1时的电容保持率为74.5%。而未活化的多孔炭最大电容为253 F·g-1,电容保持率仅为45.1%。此外,活化后的多孔炭还具有优异的电化学稳定性。在5 A·g-1电流下循环8 000圈后,其电容保持率高达94%。活化后的多孔炭在电容性能方面的极大改善与其比表面积的大幅提高及介孔的增多有密切关系。 相似文献
8.
9.
利用稻壳热解炭为原料制备镧负载多孔炭复合电极材料(La/PCs),先将稻壳热解炭分离出炭前驱体,再采用原位活化/负载的方法制备一系列镧负载多孔炭复合电极材料,分别考察了煅烧温度和浸渍比对其吸附性能和电化学性能的影响.采用X射线衍射(XRD)、 X射线光电子能谱(XPS)、扫描电子显微镜/X射线能谱仪(SEM-EDS)和Brunauer-Emmett-Teller比表面积(BET)法研究了该系列镧负载多孔炭复合电极材料的金属结构与价态、元素组成及表面形貌,并分析了孔结构与电容值之间可能存在的关系.结果表明,在6 mol/L KOH电解液中, La/PC_900/10材料的电容值为269.45 F/g.在电流密度为0.5 A/g时,由其组装的对称超级电容器具有23.45 W·h/kg的能量密度,此时的功率密度为0.70 kW/kg,并且循环5000次后的电容保持率为86.41%.La/PC_900/10良好的电容性能显示了其作为碳基电极应用于高性能超级电容器的潜力.研究结果为稻壳热解炭的利用和镧在新能源材料领域的应用提供了一条可行路径. 相似文献
10.
11.
开发并利用清洁的、可再生的能源是解决环境污染问题和能源短缺的有效方法.碳化含碳量较高的多孔有机材料制备的多孔碳,具有较高的比表面积,良好的物化稳定性,优良的机械性能等优点,在清洁能源的存储、分离、能量的存储与转化领域有广泛的应用.常见的由多孔有机材料制备多孔碳的方法主要是非活化碳化法和活化碳化法.不同的制备方法得到的多孔碳形貌,孔结构各不形同.多孔碳材料自身的结构性质可以影响其应用.合理的设计并调控多孔碳的“孔”,发挥孔尺寸的“筛分效应”可以有效地对气体进行存储和分离.在锂电等能量转化领域,“限域效应”是影响锂电性能的重要因素.多孔碳材料中较小的孔可以限域活性成分,而较大的孔可以快速传输,两种孔的协同效应可以使锂电性能大大提升.本综述系统地归纳了一步碳化多孔有机材料制备多孔碳的方法及其优势,详细地介绍了其在气体吸附、存储、分离以及电化学等领域的应用.最后,结合多孔碳材料的研究现状,提出由多孔有机材料制备多孔碳材料所面临的挑战,同时也展望了多孔碳材料的应用前景. 相似文献
12.
以空心介孔硅球为模板,酚醛树脂乙醇溶液为碳源制得了分级多孔碳(HPCs).以酸化处理后的HPCs为载体、对甲苯磺酸(p-TSA)为掺杂剂、三氯化铁(FeCl3)为氧化剂,通过原位化学氧化聚合法制备了聚吡咯-分级多孔碳(PPy-HPCs)纳米复合材料.采用场发射扫描电镜(FESEM)、透射电镜(TEM)、傅里叶红外光谱仪(FT IR)、恒流充放电、循环伏安以及交流阻抗等测试技术对复合材料进行了形貌结构和电化学性能的研究.结果表明:聚吡咯成功地包覆在HPCs的表面,随着聚吡咯含量的增加,复合材料的比容量呈现先增大后减小的趋势.当聚吡咯的质量含量为34.9%时,复合材料在电流密度为0.1 A/g时达到最大比容量(316 F/g),在1 A/g的电流密度下循环1 000次后,比容量保持率为95.8%,聚吡咯的引入有效地提高了HPCs电极材料的电化学性能. 相似文献
13.
Man Jiang Jingli Zhang Lingbao Xing Jin Zhou Hongyou Cui Weijiang Si Shuping Zhuo 《中国化学》2016,34(11):1093-1102
Porous carbons (PC) were prepared from a waste biomass named chestnut shell via a two‐step method involving carbonization and KOH activation. The morphology, pore structure and surface chemical properties were investigated by scanning electron microscopy (SEM), N2 sorption, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The carbons have been evaluated as the electrode materials for supercapacitors by a two‐electrode system in 6 mol/L KOH electrolyte. Benefiting from the porous texture, high surface area and high oxygen content, the PCs derived from chestnut shell have exhibited high specific capacitance of 198.2 (PC‐1), 217.2 (PC‐2) and 238.2 F·g?1 (PC‐3) at a current density of 0.1 A·g?1, good rate capability of 55.7%, 56.6% and 54.9% in a range of 0.1–20 A·g?1 and high energy density of 5.6, 6.1 and 6.7 Wh·kg?1, respectively. This is believed to be due to electric double layer capacitance induced by the abundant micropores and extra pseudo‐capacitance generated by oxygen‐containing groups. At a power density of 9000 Wh·kg?1, the energy density is 3.1, 3.5 and 3.7 Wh·kg?1 for PC‐1, PC‐2 and PC‐3, respectively, demonstrating the potential of the carbons derived from chestnut shells in energy storage devices. 相似文献
14.
Metal‐Nitrogen‐doped Porous Carbons Derived from Metal‐Containing Ionic Liquids for Oxygen Reduction Reaction 下载免费PDF全文
Cancan Wang Dr. Jiangna Guo Dr. Dan Xu Juewen Zhang Muzi Chen Prof. Feng Yan 《化学:亚洲杂志》2018,13(8):1029-1037
This study describes a self‐doping and additive‐free strategy for the synthesis of metal‐nitrogen‐doped porous carbon materials (CMs) via carbonizing well‐tailored precursors, metal‐containing ionic liquids (M‐ILs). The organic skeleton in M‐ILs serves as both carbon and nitrogen sources, while metal ions acts as porogen and metallic dopants. A high nitrogen content, appropriate content of metallic species and hierarchical porosity synergistically endow the resultant CMs (MIBA‐M‐T) as effective electrocatalysts for the oxygen reduction reaction (ORR). MIBA‐Fe‐900 with a high specific surface area of 1567 m2 g?1 exhibits an activity similar to that of Pt/C catalyst, a higher tolerance to methanol than Pt/C, and long‐term durability. This work supplies a simple and convenient route for the preparation of metal‐containing carbon electrocatalysts. 相似文献
15.
In this paper we study a method for the determination of the micropore volume distribution function of activated carbons. This method is based on the Integral Adsorption Equation concept (IAE). The micropore volume distribution function is assumed to be a Gaussian of which the parameters are unknown. These parameters are determined using adsorption isotherms of carbon dioxide on a given activated carbon (F30/470 CHEMVIRON CARBON) at 278, 288, 298, 303, 308, 318 and 328 K and for pressures up to 100 kPa. Several local adsorption models are used (Langmuir, Volmer, Fowler-Guggenheim, Hill-de Boer). The influence of the choice of the local model on the pore volume distribution function is discussed. The physical validity of this function and the performances of the different models are presented. It appears that the effect of the temperature on the adsorption isotherms is difficult to model over a wide range of relative pressure. The Hill-de Boer and the Langmuir local models are the most efficient (average errors respectively equal to 3.53% and 2.80% in the studied range of temperature and pressure). They provide the most meaningful parameters for the pore volume distribution function. 相似文献
16.
通过简单的一步碳化方法, 以含氮的多孔有机骨架JUC-Z2为碳前驱物制备出氮掺杂多孔碳材料. 与原始JUC-Z2材料相比, 制备的多孔碳材料显示出明显提高的气体吸附量和增强的吸附焓. 其中JUC-Z2-900的CO2吸附量高达113 cm3·g-1, H2吸附量也达到246 cm3·g-1, 超过了大部分报道的多孔材料. 尤其是JUC-Z2-900的CH4吸附量在273 K, 1 bar下高达60 cm3·g-1, 据我们所知, 这一值为目前报道材料的最高值. 除此之外, 样品还显示出选择性吸附CO2的能力, 273 K下, JUC-Z2-900的CO2/N2的选择性高达10, CO2/H2的选择性也高达66. 另外, 样品具有很高的热稳定性, 有望应用在碳捕获和清洁能源储存等领域. 相似文献
17.
汉麻杆基活性炭表面织构与储氢性能的研究 总被引:2,自引:0,他引:2
以天然汉麻杆为原料,采用KOH化学活化的方法改变活化时间制备出了高比表面积活性炭,并且对其表面进行硝酸氧化处理,研究活性炭表面化学状态对其吸附性能的影响。采用77 K低温氮气吸附和FTIR对样品进行了表征,并在77 K、100 kPa的条件下测定样品的氢气吸附等温线。结果表明,所有样品具有较高的比表面积(2 435.93~3 240.95 m2·g-1)和总孔容(1.3~1.98 cm3·g-1),且随活化时间的延长而增加,3.5 h达到最大值,之后由于骨架坍塌有所减小。所有样品的孔径分布较为一致呈多峰型分布,主要以小于2 nm的微孔为主,同时含有少量的中孔和大孔。活化3.5 h样品的吸氢量最大,达到3.28wt%。研究发现,吸氢量受比表面积和孔容等参数影响较大,77 K下不仅小于2 nm的微孔对活性炭吸氢行为贡献较大,中孔也有十分重要的影响。样品经硝酸氧化处理后,BET比表面积和总孔容均在一定程度上减小,而氢气吸附量也有所降低。 相似文献
18.
19.
Study of Water Adsorption on Activated Carbons with Different Degrees of Surface Oxidation 总被引:1,自引:0,他引:1
A carbon of wood origin was oxidized with different oxidizing agents (nitric acid, hydrogen peroxide, and ammonium persulfate). The microstructural properties of the starting material and the oxidized samples were characterized using sorption of nitrogen. The surface acidity was determined using Boehm titration and potentiometric titration. The changes in the surface chemistry were also studied by diffuse reflectance FTIR. Water adsorption isotherms were measured at three different temperatures close to ambient (relative pressure from 0.001 to 0.3). From the isotherms the heats of adsorption were calculated using a virial equation. The results indicated that the isosteric heats of water adsorption are affected by the surface heterogeneity only at low surface coverage. In all cases the limiting heat of adsorption was equal to the heat of water condensation (45 kJ/mol). 相似文献
20.
A series of porous carbon materials was synthesized via high temperature pyrolysis from well-defined and thermally stable precursors, namely porous organic frameworks(POFs), in inert atmosphere. The porous carbon materials showed enhanced gas adsorption capacities together with increased heat of adsorption and stronger affinity between the frameworks and the gases as compared to the precursor materials. To exemplify, sample C-POF-TBBP-1000 with a high BET surface area of 1290 m2/g can adsorb 2.8 mmol/g CH4(273 K, 101.325 kPa), 5.4 mmol/g CO2(273 K, 101.325 kPa) and 2.2% H2(mass fraction, 77 K, 101.325 kPa), thereby surpassing most other porous adsorbent materials reported till date. The study highlights the potential of porous carbons derived from novel porous organic framework structures for gas adsorption applications. 相似文献