Inkjet printing of Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2</Subscript> thin films on Ni-5%W flexible substrates

The successful inkjet printing of a cerium gadolinium oxide (Ce_0.8Gd_0.2O₂) precursor solution on highly textured Ni-5%W is reported. A stable ink was synthesised from metal acetates and propionic acid with rheological properties suitable for inkjet printing and also the development of solid–liquid interface comparable with thin film formation by dip coating. Two different drop-on-demand print heads were used for deposition: a 16-nozzle piezoelectric cartridge and a single electromagnetic nozzle. Two different rastering patterns with different droplet sizes and spacing were compared. Thermogravimetry and X-ray diffractometry were used to study the thermal decomposition of the metal oxide precursors and to determine the shortest possible heat treatment of the deposited layers, potentially suitable for continuous large scale production. The results from X-ray diffraction show that the single phase Ce_0.8Gd_0.2O₂ was obtained in all cases, but only piezoelectric inkjet printing with optimised drop overlapping produces a highly textured buffer layer. Optical micrographs and atomic force microscopy also indicate the good quality of deposited films after heat treatment.     

The electrochemical behavior of the LaSrCuO<Subscript>4 − δ</Subscript>/Ce<Subscript>0.9</Subscript>Gd<Subscript>0.1</Subscript>O<Subscript>2 − δ</Subscript> interface

The electrochemical behavior of the LaSrCuO_{4 − δ}/Ce_0.9Gd_0.1O_{2 − δ} interface is studied by impedance spectroscopy and cyclic voltammetry methods. By analyzing the dependence of the impedance frequency spectra on the oxygen partial pressure, the rate-determining stages of oxygen exchange are determined in the temperature interval of 500–900°C. For temperatures above 700°C, the adsorption of oxygen molecules and their dissociation to oxygen atoms are shown to make a substantial contribution to the polarization resistance of the overall electrode process, besides the charge-transfer resistance.     

Sintering behavior and ionic conductivity of Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>1.9</Subscript> with a small amount of MnO<Subscript>2</Subscript> doping

A 20% GdO_1.5 doped ceria solid solution with a small amount of MnO₂ doping (≤5% molar ratio) was prepared via the mixed oxide method from high-purity commercial powders with grain size around 0.2–0.5 μm. X-ray diffraction analysis indicated that all the samples exhibited the fluorite structure, and no new phase was found. The data from dilatometeric measurements and scanning electron microscopy observations revealed that 1% Mn doping reduced the sintering temperature by over 150 °C, and enhanced the densification and grain growth. Mn doping has little effect on grain interior conductivity, but a marked deterioration in grain boundary behavior is observed. This leads to a lower total conductivity in comparison with the undoped Ce_0.8Gd_0.2O_2–δ. Therefore, for solid oxide fuel cells (SOFCs) with Mn-containing compounds as electrodes, optimization of electrode fabrication conditions is needed to prevent the formation of a lower conductivity layer at the electrode/electrolyte interface since Mn will diffuse from the electrode side to the electrolyte during fabrication and operation of SOFCs. Electronic Publication     

Yttria stabilized zirconia solid electrolyte surface modification with ZrO<Subscript>2</Subscript>, Y<Subscript>2</Subscript>O<Subscript>3</Subscript>, and ZrO<Subscript>2</Subscript> + 9 mol % Y<Subscript>2</Subscript>O<Subscript>3</Subscript> films

The surface of ceramic electrolyte ZrO₂ + 9 mol % Y₂O₃, hereinafter referred to as YSZ (abbreviated yttria stabilized zirconia), was modified with 0.1 to 0.2 μm oxide films of ZrO₂, Y₂O₃, and YSZ (same composition as substrate) by dip coating in alcohol solutions of the relevant salts and further annealing. The results of scanning electronic microscopy and X-ray diffraction evidence epitaxial film growth. By means of impedance spectroscopy at the temperatures of 500 to 600°C, the effect of YZS electrolyte surface modification with ZrO₂, Y₂O₃, and YSZ films to the polarization resistance of silver electrode was studied.     

Conductivity and thermal expansion of the Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>1.9</Subscript> solid electrolyte in the oxidizing and reducing atmospheres

Highly compact (99%) solid electrolyte Ce_0.8Gd_0.2O_1.9 with submicron (0.3 μm) grains is synthesized. The dilatometric (20–850°C) and conductivity (180–350°C) measurements are performed on the electrolyte in air and as a function of the partial oxygen pressure \(p_{O_2 } \) (0.21?1×10^?25 atm) at 600, 700, and 800°C. An inflection is found in the temperature dependences of the thermal coefficient of linear expansion and conductivity (impedance measurements) at ～230°C, which is the evidence for a phase transition. The activation energies for conduction in the grain bulk and boundaries differ only slightly, indicating that the grain boundaries’ resistance is caused not by the precipitation of the second phase at the boundaries, but most probably by the presence of intergranular nanopores. The dilatometric measurements confirm a significant increase in the linear dimensions of Ce_0.8Gd_0.2O_1.9 in the reducing atmospheres with a parallel increase in its electron conductivity. The electron conductivity and specific elongation increase proportionally to \(p_{O_2 }^{ - 1/4} \) at all temperatures. The \(p_{O_2 } \) values, at which the transport numbers of ions t _i = 0.5, are determined. They are 10^?22.5, 10^?20, and 10^?18 atm at 600, 700, and 800°C, respectively.     

Preparation and radioluminescent characteristics of Li<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaF<Subscript>2</Subscript> glasses doped with Ce(III) and Gd(III)

A method has been developed for the preparation of homogeneous moisture-resistant glasses with the composition Li₂O-B₂O₃-P₂O₅-CaF₂ : Ce³⁺-Gd³⁺. Energy transfer from Gd³⁺ to Ce³⁺ was noted in a study of the radioluminescence spectra of these samples using ²⁴¹Am as the excitation source (60 keV). The decay time of the Ce³⁺ radioluminescence in the glasses obtained was 20-25 ns.     

Dependence of the Physicochemical and Catalytic Properties of Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> Oxide on the Means of Synthesis

The effect the means of synthesis have on the texture, phase composition, redox properties, and catalytic activity of binary oxide systems with the composition Ce_0.5Zr_0.5O₂ are studied. The obtained samples are characterized via BET, SEM, DTA, XRD, and Raman spectroscopy. A comparative analysis is performed of the physicochemical properties of biomorphic systems Ce_0.5Zr_0.5O₂ obtained using wood sawdust and cellulose as templates and the properties of binary oxides of the same composition obtained by template-free means. The catalytic properties of the obtained oxide systems Ce_0.5Zr_0.5O₂ are studied in the reaction of carbon black oxidation. It is shown that the texture of the oxide depends on the means of synthesis. When biotemplates are used, fragile porous systems form from thin binary oxide plates containing micro-, meso-, and macropores. Oxide obtained via coprecipitation consists of dense agglomerates with pores around 30 Å in size. In supercritical water, nanoparticles of metal oxide form that are loosely agglomerated. The intermediate spaces between them act as pores more than 100 Å in size. A system of single-phase pseudocubic modification is obtained using a cellulose template. The crystal lattices of all the obtained systems contain a great many defects. It is shown that the system prepared via synthesis in supercritical water has the best oxygen-exchange properties. A comparative analysis is performed of the effect the physicochemical properties of the samples have on their activity in the catalytic oxidation of carbon black.     

Structure and surface properties of ZrO<Subscript>2</Subscript>, CeO<Subscript>2</Subscript>, and Zr<Subscript>0.5</Subscript>Ce<Subscript>0.5</Subscript>O<Subscript>2</Subscript> prepared by a microemulsion method according to X-ray diffraction,TPR, and EPR data

It was established by X-ray diffraction, TPR, and EPR that microemulsion (m.e.) synthesis yields the binary oxides ZrO₂(m.e.) and CeO₂(m.e.) and the mixed oxide Zr_0.5Ce_0.5O₂(m.e.) in the form of a tetragonal, cubic, and pseudocubic phase, respectively, having crystallite sizes of 5–6 nm. The bond energy of surface oxygen in the (m.e.) samples is lower than in their analogues prepared by pyrolysis. Hydrogen oxidation on the oxides under study occurs at higher temperatures than CO oxidation. ZrO₂(m.e.) and CeO₂(m.e.) are active in O₂⁻ formation during NO + O₂ adsorption, while CeO₂ is active during CO + O₂ adsorption, too. However, its amount here is one-half to one-third its amount in the pyrolysis-prepared samples, signifying a reduced number of active sites, which are Zr⁴⁺ and Ce⁴⁺ coordinatively unsaturated cations and Me⁴⁺-O²⁻ pairs. O₂⁻ radical anions are stabilized in the coordination sphere of Zr⁴⁺ coordinatively unsaturated cations via ionic bonding, and in the sphere of Ce⁴⁺ cations, via covalent bonding. Ionic bonds are stronger than ionic-covalent bonds and do not depend on the ZrO₂ phase composition. Zr_0.5Ce_0.5O₂ is inactive in these reactions because of the strong interaction of Zr and Ce cations. It is suggested that Ce^{(4 + β)+} coordinatively unsaturated cations exist on its surface, and their acid strength is lower than that of Zr⁴⁺ and Ce⁴⁺ cations in ZrO₂ and CeO₂, according to the order ZrO₂ > CeO₂ ≥ Zr_0.5Ce_0.5O₂. Neither TPR nor adsorption of probe molecules revealed Zr cations on the surface of the mixed oxide.     

La<Subscript>0.1</Subscript>Ca<Subscript>0.9</Subscript>MnO<Subscript>3</Subscript>/Co<Subscript>3</Subscript>O<Subscript>4</Subscript> for oxygen reduction and evolution reactions (ORER) in alkaline electrolyte

Non-precious metal bifunctional catalysts are of great interest for metal–air batteries, electrolysis, and regenerative fuel cell systems due to their performance and cost benefits compared to the Pt group metals (PGM). In this work, metal oxides of La_0.1Ca_0.9MnO₃ and nano Co₃O₄₇ catalyst as bifunctional catalysts were used in oxygen reduction and evolution reactions (ORER). The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption isotherms. The electrocatalytic activity of the perovskite-type La_0.1Ca_0.9MnO₃ and Co₃O₄ catalysts both as single and mixtures of both were assessed in alkaline solutions at room temperature. Electrocatalyst activity, stability, and electrode kinetics were studied using cyclic voltammetry (CV) and rotating disk electrode (RDE). This study shows that the bifunctional performance of the mixed La_0.1Ca_0.9MnO₃ and nano Co₃O₄ was superior in comparison to either La_0.1Ca_0.9MnO₃ or nano Co₃O₄ alone for ORER_. The improved activity is due to the synergistic effect between the La_0.1Ca_0.9MnO₃ and nano Co₃O₄ structural and surface properties. This work illustrates that hybridization between these two metal oxides results in the excellent bifunctional oxygen redox activity, stability, and cyclability, leading to a cost-effective application in energy conversion and storage, albeit to the cost of higher catalyst loadings.     

Low temperature thermodynamic properties of Gd<Subscript>2</Subscript>SrCo<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Thermodynamic properties of a layered perovskite oxide Gd₂SrCo₂O₇ have been studied. Powder X-ray diffraction, electric resistivity, magnetic susceptibility and heat capacity measurements were carried out. The crystal structure was determined as I4/mmm. The temperature dependence of the magnetic susceptibility was fitted to the Curie-Weiss behavior with antiferromagnetic interaction. Spin state of Co³⁺ ion was derived to be intermediate spin state configuration (t_2g⁵e_g¹). The spin ordering was observed as a broad anomaly in the heat capacity curve with a peak at 2 K. The measured entropy was 35.47 J K^-1mol^-1, which was 65% of expected value. Thus the spin ordering should not be completed at the lowest temperature 0.2 K covered in the present experiments and/or some short range ordering remains at higher temperatures.     

Synthesis of IR phosphors based on germanatoborate Gd<Subscript>14</Subscript>Ge<Subscript>2</Subscript>B<Subscript>6</Subscript>O<Subscript>34</Subscript>

Processes of the formation of germanatoborates Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ have been studied using different methods of synthesis (solid-state interaction, direct and inverse co-precipitation, self-propagating high-temperature synthesis (SHS)). It has been established that the synthesis of germanatoborates Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ using the inverse precipitation and SHS methods occurs with the formation of an intermediate apatite-like phase, which upon heating to above 1100°С is reconstructed into the Ln₁₄B₆Ge₂O₃₄ (Ln = Gd, Nd) structure. The germanatoborates synthesized crystallize in the trigonal system (space group P3₁). The lattice parameters of Gd_13.02Nd_0.98B₆Ge₂O₃₄ are a = 9.746(4) Å and c = 25.795(13) Å. The thermal stability of the Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ germanatoborates has been studied. The obtained materials of composition Gd_13.02Nd_0.98B₆Ge₂O₃₄ show luminescence properties and can be employed as infrared phosphors.     

Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

Phase equilibria in the Ce<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Ce₂O₃-K₂O-P₂O₅ ternary system has been investigated by thermoanalytical methods (DTA, DSC), powder X-ray diffraction, XPS and IR spectroscopy. The existence of three double potassium-cerium(III) phosphates has been confirmed and a new binary phosphate K₄Ce₂P₄O₁₅ has been found. Phase diagram and isothermal section at room temperature of the system Ce₂O₃-K₂O-P₂O₅ have been presented.     

Mid-temperature solid oxide fuel cells with thin film ZrO<Subscript>2</Subscript>: Y<Subscript>2</Subscript>O<Subscript>3</Subscript> electrolyte

Data on the mid-temperature solid-oxide fuel cells (SOFC) with thin-film ZrO₂-Y₂O₃ (YSZ) electrolyte are shown. Such a fuel cell comprises a carrying Ni-YSZ anode, a YSZ electrolyte 3–5 μm thick formed by vacuum ion-plasma methods, and a LaSrMnO₃ cathode. It is shown that the use of a combined method of YSZ electrolyte deposition, which involves the magnetron deposition of a 0.5–1.5-μm thick sublayer and its pulse electron-beam processing allows a dense nanostructured electrolyte film to be formed and the SOFC working temperature to be lowered down as the result of a decrease in both the solid electrolyte Ohmic resistance and the Faradaic resistance to charge transfer. SOFC are studied by the methods of voltammentry and impedance spectroscopy. The maximum power density of the SOFC under study is 250 and 600 mW/cm⁻² at temperatures of 650 and 800°C, respectively.     

Physicochemical Properties of Li<Subscript>6</Subscript>V<Subscript>5</Subscript>O<Subscript>15</Subscript> as the Cathode Material for Lithium-Ion Batteries

Lithium-vanadium oxide with the formal composition Li₆V₅O₁₅, uniform microsctructure, and the particle size of 100 nm is synthesized by a solution method. The synthesized compound is characterized by the methods of X-ray diffraction analysis, Raman spectroscopy, and synchronous thermal analysis. The total electric conductivity is measured by the method of impedance spectroscopy and its electronic component is estimated by dc method. In the temperature range of 200–400°C, Li₆V₅O₁₅ represents a mixed electronic- ionic conductor with predomination of the ionic component and is thermally stable up to 550°С. Preliminary tests of a laboratory model of electrochemical cell Li|LiPF₆|Li₆V₅O₁₅ are carried out.     

Master sintering curve for Gd-doped CeO<Subscript>2</Subscript> solid electrolytes

The sintering behavior of gadolinia-doped ceria powders was studied by the master sintering curve (MSC). Dilatometric analyses of powders produced by a soft chemical method were performed to provide the experimental data set for the construction of the MSC. The assumed model provided good fittings of the MSC and the activation energy for the sintering of Ce_1−x Gd _x O_3−δ, with x = 0, 0.05, 0.1, and 0.2 were found to be in the 218–325 KJ/mol range, depending on the dopant content. The results supported that both the nanometric size of the particles and the difference in ionic radii between Gd³⁺ and Ce⁴⁺ affects the sintering of Gd-doped CeO₂.     

Effect of pretreatment conditions on the catalytic activity of coprecipitated Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> catalyst in soot oxidation

The temperature of soot oxidation and efficiency of Ce_0.5Zr_0.5O₂ catalyst depends on its morphology, which determines the area of intergranular contact between the solid substrate and the catalyst. The temperature-programmed reduction in hydrogen to 1000°C and oxidation at 500°C (redox cycles) cause the mobility of oxygen in oxide to be enhanced and decrease the temperature of soot combustion. Oxidation of soot in the air flow on the Ce_0.5Zr_0.5O₂ catalyst result in its activation. Reuse of the catalyst decreases the temperature of soot oxidation.     

Electrophoretic Deposition of Thin-Film Coatings of Solid Electrolyte Based on Microsize BaCeO<Subscript>3</Subscript> Powders

Results are presented of an electrophoretic deposition of thin-film coatings based on doped barium cerate BaCeO₃ on a cathode substrate La₂NiO₄ (LNO), which are of interest for the technology of medium-temperature solid-oxide fuel cells. Suspensions for electrophoretic deposition in a mixed dispersion medium isopropanol/acetylacetone = 70/30 vol %, prepared from microsized powders BaCe_0.8Sm_0.2O_3–δ (BCSO) and BaCe_0.89Gd_0.1Cu_0.01O_3–δ (BCGCuO) synthesized by the citrate-nitrate method, demonstrated a high positive ζ-potential (+25 mV) suitable for deposition. A combination of the ultrasonic treatment and centrifugation made it possible to diminish the hydrodynamic diameter of BCSO and BCGCuO particles to 880 and 294 nm, respectively. It was shown that the BCGCuO film deposited onto an LNO cathode substrate has a higher density as compared with the BCSO film, which is due to the properties of the suspensions obtained. Upon a cyclic electrophoretic deposition in six stages, the total mass and thickness of the BCGCuO coating were 3.2 mg cm^–2 and 5 μm, which is sufficient for a unit solid-oxide cell to be formed. According to SEM data, the BCGCuO film is dense and has fully formed grains with sizes of 1 to 7 μm. Methods are discussed for eliminating the loss of Ba in sintering of a thin film based on BaCeO₃.     

Electrophysical properties of Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2 − δ</Subscript> + <Emphasis Type="Italic">x</Emphasis> mol % Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid composite electrolytes

The influence of aluminum and cobalt oxides on the microstructure and the mechanical, electrical, and optical properties of the Ce_0.8Gd_0.2O_2−δ solid electrolyte was studied. Using nanosized Al₂O₃ in the synthesis allowed it to be uniformly distributed in the composite electrolyte and improved the microhardness of the resulting ceramics. The introduction of cobalt oxide made it possible to lower the synthesis temperature during the preparation of gasproof ceramics and hindered, to a certain extent, the formation of the GdAlO₃ phase during synthesis. Using the standard set of investigation methods allowed us to find solutions to several problems in using this electrolyte for solid-oxide fuel cells (SOFCs).     

Formation of Bilayer Thin-Film Electrolyte on Cathode Substrate by Electrophoretic Deposition

Potentialities of the method of bilayer thin-film electrolyte electrophoretic deposition onto cathodic substrate are analyzed. Ce_0.8Sm_0.2O_1.9–δ (SDC) nanopowder and BaCe_0.89Gd_0.1Cu_0.01O_3–δ BCGCuO) micropowder are prepared by the methods of laser evaporation–condensation and pyrolysis, respectively. The effect of ultrasonic treatment on the SDC and BCGCuO particle distribution in suspensions and their electrokinetic properties are studied. The using of the ultrasonic treatment combined with centrifugation allowed obtaining an aggregative-stable suspension of the BaCe_0.89Gd_0.1Cu_0.01O_3–δ micron particles in the isopropanol–acetylacetone mixed medium (70/30 v/v) that is characterized by high zeta potential. Ce_0.8Sm_0.2O_1.9–δ and BaCe_0.89Gd_0.1Cu_0.01O_3–δ thin films are obtained at the La₂NiO_{4 +δ} cathode substrate using electrophoretic deposition; microstructure and electric properties of the prepared thin-film structures are studied. The conductivity and electric properties of the bilayer electrolyte were found to be determined by the Ce_0.8Sm_0.2O_1.9–δ film properties. Despite the sintering high temperature, the grain structure of the BaCe_0.89Gd_0.1Cu_0.01O_3–δ film is underdeveloped; this is determined by the micron powder properties.