Some analytical applications of aromatic sulfonyl haloamines: Determination of thiocyanate and cyanide ions in metal complexes and salts and thiosemicarbazide in metal complexes with bromamine-T

A simple, rapid, and accurate method for the determination of thiocyanate and cyanide ions in metal complexes and salts, and thiosemicarbazide (TSC) in Zn, Cd, Hg, Ni, Pt, and Pd metal complexes with excess of bromamine-T has been developed. The oxidation involves eight- and two-electron changes, respectively, with NCS^? and CN^? ions and a 12-electron stoichiometry per TSC molecule, in 0.1–0.2 N NaOH medium. The proposed method could be employed for computing the number of thiocyanate, cyanide, and TSC ligands in the respective complexes. The aromatic sulfonyl haloamine, bromamine-T, has been prepared and characterized by uv, ir, and FT NMR ¹H and ¹³C spectral data and its mass spectrum.     

Some analytical applications of aromatic sulfonyl haloamines: Determination of thiosemicarbazide alone and in its metal complexes with bromamine-B and dichloramine-B

Simple, rapid, and reproducible back titration methods for the determination of thiosemicarbazide (TSC) in free state and in Zn, Cd, Hg, Ni, Pt, and Pd metal complexes with bromamine-B (BAB) and dichloramine-B (DCB) have been developed. The oxidation reaction involves a 12-electron change per TSC molecule in 0.2–1.0 M NaOH and water-acetic acid media with BAB and DCB, respectively. The proposed analytical procedures for the assay of TSC are also useful for computing the number of TSC ligands present in the respective metal complexes. The two aromatic sulfonyl haloamines used, BAB and DCB, were prepared and then characterized by ¹³C FT-NMR spectral data.     

Some analytical applications of aromatic sulfonyl haloamines: Determination of thiocyanate and cyanide ions in metal complexes and salts with bromamine-B and dichloramine-B

Simple, rapid, and reproducible methods for the determination of thiocyanate and cyanide ions in metal salts and complexes with bromamine-B (BAB) and dichloramine-B (DCB) have been developed. The oxidation involves eight and two electron changes, respectively, with NCS^? and CN^? ions in 0.05–0.20 N NaOH medium in the case of BAB and in partially aqueous medium with DCB. The proposed methods could be employed for computing the number of thiocyanate and cyanide ligands present in the respective metal complexes.     

Assay of d-cycloserine by chloramine-B,bromamine-T,and bromamine-B

The reaction between d-cycloserine (DCS) and aromatic N-haloamines proceeds quantitatively over a wide range of experimental conditions. Simple titrimetric procedures for the assay of DCS are described. Oxidation of DCS involves an eight-electron change and the oxidation products are identified. The methods can be used for the assay of the antibiotic in medicinal preparations as well as for calculating the number of ligand molecules present in metal complexes of DCS.     

Highly selective hydrogenation of halonitroaromatics to aromatic haloamines by ligand modified Ni-based catalysts

Ligand modification of Ni-based catalysts by coordination of dicyandiamide to Ni metal leads to enhanced selectivity for the selective hydrogenation of halonitroaromatics.The selectivity of above 99.9%to aromatic haloamines can be achieved at the conversion of 100%.The results of H₂-TPD and FT-IR experiments show that Ni^-H⁺ species possessing the properties of Lewis acid site on the surface of Raney Ni could be responsible for the hydrodehalogenation.When Raney Ni was treated by dicyandiamide,Ni^-H⁺ species interacted with N atom from the dicyandiamide.This interaction was stable even at reaction temperature,which reduced the possibility to form the intermediate state of Ar-Cl...H⁺Ni^-.And then C-Cl bond could not be polarized and activated.The hvdrodechlorination process was suppressed effectively.     

Oxidation of aromatic and aliphatic triisopropylsilanylsulfanyls to sulfonyl chlorides: preparation of sulfonamides

A series of aromatic and aliphatic triisopropylsilanylsulfanyls were prepared and oxidized to the sulfonyl chlorides with KNO₃/SO₂Cl₂. The sulfonyl chlorides were characterized via their conversion to sulfonamides.     

Preparation of sulfonyl aromatic polyamides and copolyamides by means of di- or triphenyl phosphite

High molecular-weight aromatic polyamides were obtained by the direct polycondensation reaction of 4,4′-sulfonyldibenzoic acid (SDA) with various aromatic diamines, by means of di- (DPP) or triphenyl phosphite (TPP) in N-methyl-2-pyrrolidone (NMP)-pyridine solution containing metal salts such as LiCl and CaCl₂. The factors affecting the phosphorylation reaction were investigated, in particular for the reaction of SDA and 4,4′-oxydianiline (ODA). For the polymerization by means of TPP, the optimum conditions are: molar ratio of TPP to diacid, higher than 2.3; concentration of metal salts, 8 wt % LiCl or 6 wt % CaCl₂; reaction temperature, 100°C; and monomer concentration, 0.4 mol/L. For the polymerization by means of DPP, the optimum conditions are: molar ratio of DPP to diacid, higher than 3.8; concentration of metal salts of 8 wt % LiCl or 10 wt % CaCl₂; reaction temperature, 110°C; and monomer concentration, 0.4 mol/L. Copolyamides were also prepared from the reaction of ODA with the mixed diacids of SDA and other dicarboxylic acids such as terephthalic acid, isophthalic acid, and 2,6-naphthalene dicarboxylic acid by using TPP and DPP as the condensing agents.     

Kinetics and mechanism of oxidation of aspirin by bromamine-T,N-bromosuccinimide,and N-bromophthalimide

The kinetics of the oxidation of aspirin (ASP) by bromamine-T (BAT), N-bromosuccinimide (NBS), and N-bromophthalimide (NBP) has been studied in aqueous perchloric acid at 303 K. The oxidation reaction follows identical kinetics with first-order in [oxidant], fractional-order in [ASP], and inverse fractional-order in [H⁺]. Under identical experimental conditions the extent of oxidation with different oxidizing agents is in the order: NBS>BAT>NBP. The rate decreased with decreasing dielectric constant of the medium. The variation of ionic strength and the addition of the reaction products and halide ions had no significant effect on the reaction rate. The solvent isotope effect was studied using D₂O. Kinetic parameters were evaluated by studying the reaction at different temperatures. The reaction products were identified by GC–MS. The proposed reaction mechanism and the derived rate law are consistent with the observed kinetic data. Formation and decomposition constants for ASP-oxidant complexes have been evaluated. Decarboxylation, bromination, and loss of acetic acid gave 2,4,6-tribromophenol. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 407–414, 1998     

Supersaturated designs: set-ups,data interpretation,and analytical applications

For screening purposes, two-level screening designs, such as fractional factorial (FF) and Plackett–Burman (PB) designs, are usually applied. These designs enable examination of, at most, N−1 factors in N experiments. However, when many factors need to be examined, the number of experiments still becomes unfeasibly large. Occasionally, in order to reduce time and costs, a given number of factors can be examined in fewer experiments than with the above screening designs, by using supersaturated designs. These designs examine more than N _SS−1 factors in N _SS experiments. In this review, different set-ups to construct supersaturated designs are explained and discussed, followed by several possible data interpretations of supersaturated design results. Finally, some analytical applications of supersaturated designs are given.     

Kinetics and mechanism of chlorination of p-aminobenzoic acid by chloramine-B

The chlorination of p-aminobenzoic acid (PABA) by chloramine-B (CAB) in HCl medium at 303 K indicates simultaneous catalysis by H⁺ and Cl^–. The reaction is first order in [CAB] and [HCl], but fractional order in [PABA]. The observed solvent isotope effect is 1.52. A suitable mechanism is proposed.

---

- (PABA) -B (CAB) HCl 303 H⁺ Cl^–. [PABA]. 1,52. .

     

Conjugated steroids: analytical approaches and applications

An introduction to conjugated steroids and the justification for their analysis is provided covering both environmental and biological samples. Determining conjugated steroids or indeed any organic chemical which is conjugated upon excretion from the body has relevance in diagnostic monitoring, forensic screening and environmental analysis (from the endocrine disrupter perspective). The various analytical approaches and the accompanying issues are application-dependent. There are numerous options at each stage of analysis, from extraction, hydrolysis, derivatisation, and detection, and advances can be confined to the specific application for which it was developed. Emphasis is placed on the choice of separation and how gas or liquid chromatography necessitates different preparative stages to enable conjugated steroid determination. Possible future directions and research for conjugated steroid analysis are discussed.     

Some aspects of analytical instrumentation: models, techniques, instruments

Summary The paper gives a review of investigations aimed at the development of instruments and techniques for analytical chemistry performed by the Institute for Analytical Instrumentation of the USSR Academy of Sciences. Advances in mass spectrometry of non-volatile labile compounds, determination of amino acid sequence in peptides, multidimensional Mössbauer spectroscopy, EPR recording optical techniques, microcolumn chromatography, field flow fractionation (FFF), and flow injection analysis (FIA) are considered.

---

Einige Aspekte des analytischen Gerätebaus: Modelle, Verfahren, Instrumente