A highly sensitive spectrophotometric determination of palladium with chromal blue g and cetyltrimethylammonium chloride

A new spectrophotometric method for the determination of palladium with chromal blue G (Color Index 43835) and cetyltrimethylammonium chloride is described. The sensitivity of the color reaction between palladium and chromal blue G is greatly increased in the presence of cetyltrimethylammonium chloride. The palladium complex has maximal absorbance at pH 3.2–3.8 and at 670 nm. Beer's law is obeyed over the range 0.08–1.4 p.p.m. palladium; the molar absorptivity is 1.01 · 10⁵ l mol^-1 cm^-1 at 670 nm and the sensitivity is 1·10^-3 μg Pd cm^-2. The mole ratio of palladium and chromal blue G in the complex in the presence of cetyltrimethylammonium chloride is 1:3. Only scandium interferes when sodium fluoride is used as masking agent.     

Copper(II)-cetyltrimethylammonium chloride-chromal blue G ternary complex and its application to the spectrophotometric determination of copper(II)

A sensitive spectrophotometric method for the determination of copper(II) based on a ternary complex with chromal blue G, a triphenylmethane reagent in the presence of cetyltrimethylammonium chloride, is described. The sensitivity of color reaction between copper and chromal blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride, a cationic surfactant. The color development of the ternary complex can be utilized in the highly sensitive spectrophotometric determination of copper. The molar absorptivity of the binary complex between copper and chromal blue G ε_630nm = 9.56 × 10³liters · mol⁻¹ · cm⁻¹ is enchanced on ternary complex formation to ε_{542 nm} = 4.78 × 10⁴liters · mol⁻¹ · cm⁻¹. The ternary complex gave a maximal absorbance at 542 nm in the pH range 9.8–11. Beer's law is obeyed up to at least 1.2 ppm of copper. The maximal absorbance of the ternary complex was found to develop within 5 min and then it remains constant for several hours. The formation constant of the ternary complex is calculated to be 8.6 × 10¹⁰ under these conditions.     

Spectrophotometric determination of chloride in non-polar media by the mercury(II) thiocyanate reaction

A simple, rapid and accurate method for the spectrophotometric determination of chloride in non-polar media is described. The method is based on the well-known reaction of mercury(II) thiocyanate with chloride to release thiocyanate, which then reacts with iron(III). The optimum concentrations of reagents for the determination of chloride in 2,2,4-trimethylpentane (iso-octane) and cyclohexane are reported. The molar absorptivity of the complex at 505 nm is 5120 ± 200 dm³ mol^?1 cm^?1 for iso-octane and 5340 ± 340 dm³ mol^?1 cm^?1 for cyclohexane. Beer's Law is obeyed in the range 2 × 10^?7–2 × 10^?5 mol dm^?3 (0.01–1 mg l^?1) chloride.     

A highly sensitive spectrophotometric determination of gallium with Pontachrome Azure Blue B and cetyltrimethylammonium chloride

A new spectrophotometric method for the determination of gallium with Pontachrome Azure Blue B and cetyltrimethylammonium chloride is described. The sensitivity of the colour reaction between gallium and Pontachrome Azure Blue B is greatly increased in the presence of cetyltrimethylammonium chloride. The gallium complex has maximal absorbance at 680 nm and pH 6.0-6.6. Beer's law is obeyed over the range 0.08-0.6 ppm of gallium; the molar absorptivity is 1.39 x 10(5) 1.mole(-1). cm(-1) and sensitivity 4.9 x 10(-4) mu/cm(2). The mole ratio of the complex, the formation constant and effect of interfering ions are described.     

Spectrophotometric determination of aluminium and gallium with pyrogallol red and cetyltrimethylammonium ions

Spectrophotometric methods are described for the determination of microgram amounts of aluminium and gallium based on the formation of a ternary complex between the metal, pyrogallol red, and cetyltrimethylammonium bromide. The complexes have absorbance maxima at 610 and 615 nm, respectively, with molar absorptivities of 4.8 × 10⁴(Al)and 1.0 × 10⁵ liter mol^?1 cm^?1 (Ga). Numerous metals interfere. Gallium can be separated by extraction of gallium from 7 M hydrochloric acid with di-isopropyl ether. However, aluminium can be separated by extraction of interfering ions with cupferron.     

Spectrophotometric determination of vanadium using variamine blue and its application to synthetic, environmental and biological samples

A simple, rapid and accurate spectrophotometric method is described for the determination of trace amounts of vanadium using variamine blue (VB) as a chromogenic reagent. The method is based on the oxidation of variamine blue to form a violetcolored species on reaction with vanadium(V), having an absorption maximum at 570 nm. Beer’s law is obeyed in the range of 0.1–2.0 μg ml^?1. The molar absorptivity and Sandell’s sensitivity were found to be 1.65 × 10⁴ l mol^?1 cm^?1 and 0.003 μg cm^?2, respectively. Optimum reaction conditions were evaluated in order to delimit the linear range. The effect of interfering ions on the determination is described. The proposed method has been successfully applied to the determination of vanadium in steel, pharmaceutical, environmental, and biological samples.     

Spectrophotometric study of reactions of scandium,ytrium and lanthanum ions with some triphenylmethane dyes in the presence of cationic surfactants

Optimum conditions for the formation of ternary complexes of scandium, ytrium and lanthanum ions with chrome azurol S, eriochrome cyanine R and pyrocatechol violet in the presence of cetyltrimethylammonium, cetypyridinium and tetradecyldimethylbenzyl-ammonium (zephiramine) ions are described. The spectrophotometric determination of scandium with chrome azurol S and zephiramine exhibits the greatest sensitivity (? = 1.50 × 10⁵ l mol^?1 cm^?1 at 610 nm). In the spectrophotometric determination of scandium with eriochrome cyanine R and cetylpyridinium ion (? = 9.2 × 10⁴ at 600 nm), the interference caused by yttrium is the least. In the best method for yttrium (with pyrocatechol violet and zephiramine), the molar absorptivity is 3.3 × 10⁴ at 660 nm. Lanthanum does not form ternary complexes of analytical interest in these systems. Some aspects of the formation of ternary complexes with cationic surfactants are discussed.     

Spectrophotometric and solvent extraction study of o-hydroxybenzaldehyde isonicotinoyl hydrazone complexes with gallium and indium

Complex formation of o-hydroxybenzaldehyde isonicotinoyl hydrazone with Ga^III, In^III and Tl^III has been studied. The thallium complex is unstable. The composition and the instability constants of gallium and indium complexes were determined. Molar absorptivity of gallium complex at 390 nm is 3.40 × 10⁴ and that of indium at 380 nm is 3.20 × 10⁴ l mole^?1 cm^?1. Both complexes were found to be rapidly and quantitatively transfered into 1-pentanol. The corresponding aluminum complex is not extracted. Possible analytical application for separation and spectrophotometric determination of these elements is also examined.     

A highly sensitive spectrophotometric determination of beryllium with chromal blue G and cetyltrimethylammonium chloride

Chromal blue G in the presence of cetyltrimethylammonium chloride is proposed for the spectrophotometric determination of microgram amounts of beryllium. The sensitivity of color reaction between beryllium and chromai blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride (_626nm = 93,000). Beer's law is obeyed over the range 0.012–0.12 ppm of beryllium. Full color development occurs in 20 min at pH 5.5 and at 626 nm. The mole ratio of beryllium and chromai blue G in the complex is estimated to be 1:2. The proposed method is very sensitive and selective for determination of beryllium when EDTA is used as a masking agent.     

Determination of manganese(VII) as 3,3′-Dianisole-4,4′-bis(3,5-diphenyltetrazolium chloride) complex and its application

A simple, rapid, selective and sensitive spectrophotometric method is described for the determination of trace amounts of manganese using Blue tetrazolium chloride as a chromogenic reagent. The method is based on the formation of ion-associate complex between manganese(VII) and the cation of ditetrazolium salt, having an absorption maximum at 255 nm. Beer’s law is obeyed in the range of 0.1–1.6 μg mL^?1. The molar absorptivity and Sandell’s sensitivity were found to be 4.97 × 10⁴ L mol^?1 cm^?1 and 1.11 × 10^?3 μg cm^?2, respectively. Limit of deterction is 6.86 ng mL^?1 Mn(VII) and limit of quantitation is 22.8 ng mL^?1 Mn(VII). Optimum reaction conditions were evaluated. The effect of interfering ions on the determination is described. The extraction, distribution and association constants, and the recovery factor have been calculated.     

Extraction,Spectrophotometric, and Atomic Absorption Spectrophotometric Determination of Selenium With N-Phenylbenzohydroxamic Acid

Abstract

Solvent extraction spectrophotometric and atomic absorption spectrophotometric methods for the determination of selenium(IV) in microgram quantities are described. The selenium(IV) forms yellow colored complex with N-phenylbenzohydroxamic acid (PBHA) extractable into chloroform from 7 M HClO₄. Se-PBHA complex has maximum absorbance at 345 nm with a molar absorptivity 1.5 × 10⁵ 1 mol^?1 cm^?1 and Sandell's sensitivity 0.000526 μg /cm². Effect of molarity, reagent concentration, diverse ions on the extraction of selenium complex were studied. The selenium is determined in presence of tellurium.     

Extraction and spectrophotometric determination of trace amounts of tin(II) with diphenylglyoxal bis(2-hydroxybenzoylhydrazone)

Diphenylglyoxal bis(2-hydroxybenzoylhydrazone) has been used as a sensitive reagent for the spectrophotometric determination of tin. This reagent forms an orange-yellow complex with stannous ion at pH 3.5–7.0 (λ_max = 455 nm, ? = 2.25 × 10⁴ liter mol^?1/cm^?1 while no reaction is observed with quadrivalent tin. The colored complex extracted into isobutyl methyl ketone has been used for the spectrophotometric determination of trace amounts of tin(II). The molar absorption in the organic solvent is 3.54 × 10⁴ liter mol^?1 cm^?1 and the compound shows its maximum absorbance at 455 nm. The interferences of foreign ions have been determined.     

Extraction of gold(III) from low-grade ores with amidines followed by its spectrophotometric determination with methylene blue

A procedure is described in which gold(III) is quantitatively extracted with an amidine into chloroform over the acidity range pH 3.0–11.0 M HCl, followed by its selective spectrophotometric determination by interaction of the extract with methylene blue in the pH range 3.0–9.0. The molar absorptivity of the coloured complex formed by extraction with ten different amidines and methylene blue reaction lie in the range 1.1 × 10⁴?6.5 × 10⁴ 1 mol^?1 cm^?1 at λ_max (650 nm) in chloroform. The simplest compound, N, N′-diphenylbenzamidine, was chosen for detailed study. The limit of detection is 5 μg Au l^?1. The method is free from interferences from the metals that are generally associated with gold. The method is simple, reproducible and applicable to the accurate recovery of gold from low-grade ores containing the metal at levels of > 1.5 μg g^?1.     

Spectrophotometric determination of platinum with substituted pyrimidine-2-thiol

The yellow complex of Pt(IV) with 1-pyridyl-4,4,6-trimethyl-1H,4H-pyrimidine-2-thiol (PyTPT) which has maximum absorbance at 430 nm, is studied for the spectrophotometric determination of the metal. Molar absorptivity is 5000 liters mol^?1 cm^?1 and Sandell's sensitivity is 0.039 μg/cm². The determination of Pt(IV) (2.8–8.4 ppm) in the presence of diverse ions is described.     

Indirect spectrophotometric determination of chromium(VI)

A new simple and sensitive spectrophotometric method for the determination of chromium(VI) is established. It relies upon the oxidation of iron(II) with the titled ion, in acidic medium, to form iron(III) which is complexed with tiron to form a stable blue color with maximum absorption at 650 nm. Adherence to Beer's law is observed in the range 10–100 μg of chromium(VI) per 25 ml, with a molar absorptivity of 5.6 × 10³ liters mol^?1 cm^?1, sensitivity index of 0.0093 μg cm^?1, relative error of ?5.0 to +0.3%, and relative standard deviation of 0.3–4.0%, depending on the concentration level. Furthermore, the reaction needs neither temperature control nor an extraction step.     

Extraction and Spectrophotometric Determination of Zirconium(IV)

Abstract

A sensitive and selective method for the extraction and spectrophotometric determination of Zr(IV) with N-p-chlorophenyl-3,4-,5-trimethoxycinnamohydroxamic acid (PTCHA) has been developed. The binary complex of Zr(IV)-PTCHA is extracted from 2–6 M HCl into chloroform, having a maximum absorbance at 385 nm; molar absorptivity 2.1 × 10⁴ 1 mol^?1 cm^?1. A ternary complex with xylenol orange (Zr-PTCHA-XO) have been studied in chloroform-ethanol media, which absorbs at 540 nm; molar absorptivity 4.3 × 10⁴ 1 mol^?1 cm^?1. The present method is applied for the analysis of zirconium in standard samples.     

Liquid-Liquid Extraction,Photometric and Atomic Absorption Spectrophotometric Determination of Mercury

Abstract

A selective and sensitive spectrophotometric and atomic absorption spectrophotometric method is developed for the determination of traces of mercury with N-phenylcinnamohydroxamic acid (PCHA) in the environment. Mercury is extracted into a chloroform solution of PCHA at pH 8.5-10.0 and determined by AAS. The mercury hydroxamate binary complex is yellow in colour having a maximum absorbance at 390 nm and molar absorptivity 4.3 × 10³ 1 mol^?1 cm^?1, sandell sensitivity 0.0466 μg/cm². The ternary system using 1-(2-pyridylazo)-2-naphthol has molar absorptivity 8.82 × 10³ 1 mol^?1 cm^?1 at 550nm, sandell sensitivity 0.0228 μ/cm². Beer's law is obeyed in the concentration range of 2.37-38.0 ppm and 0.80-19.5 ppm of mercury for binary and ternary system, respectively. The extraction of Hg-PCHA binary system is studied with a liquid cation exchanger, bis-(2-ethyl hexyl) phosphoric acid (HDEHP) and found to have better selectivity than Hg-PCHA-PAN system. The molar absorptivity of the Hg-PCHA-HDEHP system is 8.82 × 10³ 1 mol^?1 cm^?1 at 390 nm and Beer's law is obeyed in the concentration range of 0.47-20 ppm of mercury.

The present method is applied to the determination of mercury in eye drops, aurvedic drugs and environmental samples.     

Spectrophotometric Determination of Palladium(II) with n-Hydroxy-N,N-Diphenylbenzamidine and 1 -(2-Pyridylazo)-2-Naphthol

A spectrophotometric method to determine palladium(II) at trace levels is based on the extraction of palladium(II) as a binary complex with N-hydroxy-N,N′-diphenylbenzamidine (HDPBA) in chloroform at pH 5.0 ± 0.2. The complex shows maximum absorbance at 400 nm with molar absorptivity 6.4 × 10³ L mol^?1 cm^?1. The sensitivity of the Pd(II)-HDPBA complex was enhanced by the addition of l-(2-pyridylazo)-2-naphthol (PAN). The green coloured complex shows maximum absorbance at 620 nm with molar absorptivity 1.58 × 10⁴ L mol^?1 cm^?1. Sandell's sensitivity and the detection limit of the method are 0.0067 μg cm^?2and 0.1 μg Pd(II) mL^?1, respectively. Most common metal ions associated with palladium metal do not interfere. The effects of various analytical parameters on the extraction of the metal are discussed.     

Spectrophotometric determination of aluminum with bromopyrogallol red in the presence of surfactants

Spectrophotometric methods are described for the determination of microgram amounts of aluminum based on the formation of a ternary complex between the metal, bromopyrogallol red, and cetyltrimethylammonium bromide or nonylphenol tetradecaethylene glycol ether. The complexes have absorbance maxima at 627 and 612 nm, respectively, with molar absorptivities of 5.0 × 10⁴ and 2.2 × 10⁴ liter mol^?1 cm^?1. Numerous metals interfere. Aluminum can be easily separated by extraction of interfering ions with cupferron.     

Analytical applications of 3-(2′-thiazolylazo)-2,6-diaminopyridine: Spectrophotometric determination of palladium

3-(2′-Thiazolylazo)-2,6-diaminopyridine reacts with palladium(II) in strongly perchloric acid media, to produce a blue 1:1 complex (λ_max = 665 nm, ? = 1.37 × 10⁴ liters · mol^?1 · cm^?1), which allows the spectrophotometric determination of 0.6 to 4.5 ppm of palladium. The method is applied to the determination of palladium in small samples of hydrogenation catalysts.