Rapid estimation of sulfide in rumen and blood with a sulfide-specific ion electrode

Free sulfide in rumen preserved with a sulfide antioxidation reducing buffer (SAOB) is determined directly and rapidly with a sulfide ion electrode using a standard addition technique. Acid-labile sulfide in blood preserved in alkaline cadmium acetate is determined by electrode measurement after acid liberation in a Johnson-Nishita apparatus and absorption in 50% SAOB. The sulfide antioxidant reducing buffer SAOB is not recommended for preservation of blood samples because of its desulfuration effect on S-proteins and S-amino acids present in blood.     

Impedance and photoadmittance of a passive iron electrode in alkaline sodium sulfide solutions

The intensity-modulated photocurrents (photoadmittance) and the electrochemical impedance of an anodically oxidized iron electrode are studied in alkaline solutions containing the sulfide ion. The photooxidation of S^2- proceeds via a stage of their adsorption. The concentration of S^2- adsorbed on the surface decreases at a potential shift in the positive direction     

Mechanism of electroreduction of cobalt(II) in thiocyanate solutions at mercury electrodes

The process of electroreduction of cobalt(II) in thiocyanate solutions at mercury electrodes has been investigated by cyclic voltammetric, chronoamperometric and polarographic methods. The influences of pH, the concentrations of Co(II) and SCN^?, and the reduction products of SCN^?, CN^? and S^2? on the reduction waves are described. The polarographic pre-wave is an autocatalytic in nature. A mechanism involving an initial reduction of Co(II)—SCN^? at a mercury electrode followed by the chemical reduction of thiocyanate ion with the electroreduced metallic cobalt, and taking into account cyanide, sulfide, and hydroxide ions, the latter being produced by the hydrolysis of cyanide ion, is presented. Cobalt sulfide adsorbed at the electrode surface stimulates further reduction of Co(II)—CN^? and —SCN^? complexes, and depresses the interfering influence of Co(OH)₂, which is reductively desorbed from the electrode surface with giving rise to an additional peak near ?1.08 V vs. SCE.     

Amperometric determination of sulfide ion by glassy carbon electrode modified with multiwall carbon nanotubes and copper (II) phenanthroline complex

Electrocatalytic oxidation of sulfide ion on a glassy carbon electrode (GCE) modified with multiwall carbon nanotubes (MWCNTs) and a copper (II) complex was investigated. The Cu(II) complex was used due to the reversibility of the Cu(II)/Cu(III) redox couple. The MWCNTs are evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on Cu(II) complex adsorbed on MWCNTs immobilized on the surface of GCE. The modified GCE was applied to the selective amperometric detection of sulfide at a potential of 0.47 V (vs. Ag/AgCl) at pH 8.0. The calibration graph was linear in the concentration range of 5 µM–400 µM; while the limit of detection was 1.2 µM, the sensitivity was 34 nA µM^?1. The interference effects of SO₃ ^2?, SO₄ ^2?, S₂O₃ ^2?, S₄O₆ ^2?, Cysteine, and Cystein were negligible at the concentration ratios more than 40 times. The modified electrode is more stable with time and more easily restorable than unmodified electrode surface. Also, modified electrode permits detection of sulfide ion by its oxidation at lower anodic potentials.      

Lead(II) Sulfide. Synthesis in Lead(II) Tetraoxophosphate(V) Gelatin-immobilized Matrix Implantates and Sorption Activity Toward Silver(I) Ions

Processes that occur in lead(II) tetraoxophosphate(V) gelatin-immobilized matrix systems on their contact with aqueous solutions containing the sulfide anion S₂ ^- were studied. As a result of this contact, lead(II) sulfide is formed. The sorption activity of the resulting metal sulfide gelatin-immobilized matrix systems with respect to Ag(I) ions is associated with substitution of Pb(II) by Ag(I) ions.     

A field electrode method for the determination of sulfide

This paper reports the development of a field electrode method for the determination of total sulfide in water. The method involves the use of preweighed sodium sulfide crystals in the standardization process. Sodium sulfide crystals were weighed and sealed in air-tight plastic volumetric flasks. Standards were prepared in the field by adding a sulfide antioxidant buffer to the flasks containing the sulfide crystals and diluting it to mark with deionized deaerated water. Standards of lower concentration were prepared by serial dilutions of first standards.The results of the reproducibility determination revealed that sulfide concentrations as low as 6 ppb could be measured with a reproducibility of better than ±10%.Water samples were collected from a series of lakes in Fort Bend County, Texas (near Houston) and analyzed for sulfide content. The sulfide ion concentrations of these samples were determined directly in the field by use of an Orion Model 407A/F specific meter equipped with a silver/sulfide ion selective electrode in conjunction with a double junction reference electrode.     

Detection of As(III) via oxidation to As(V) using platinum nanoparticle modified glassy carbon electrodes: arsenic detection without interference from copper

The electrochemical detection of As(III) was investigated on a platinum nanoparticle modified glassy carbon electrode in 1 M aqueous HClO4. Platinum nanoparticle modified glassy carbon electrodes were prepared by potential cycling in 0.1 M aqueous KCl containing 1 mM K2PtCl6. In each potential cycle, the potential was held at + 0.5 V for 0.01 s and at -0.7 V for 10 s. 25 cycles were optimally used to prepare the electrodes. The resulting electrode surfaces were characterized with AFM. The response to arsenic(III) on the modified electrode was examined using cyclic voltammetry and linear sweep voltammetry. By using the As(III) oxidation peak for the analytical determination, there is no interference from Cu(II) if present in contrast to the other metal surfaces (especially gold) typically used for the detection of arsenic; Cu(II) precludes the use of the As(0) to As(III) peak for quantitative anodic stripping voltammetry measurements due to the formation of Cu3As2 and an overlapping interference peak from the stripping of Cu(0). After optimization, a LOD of 2.1 +/- 0.05 ppb was obtained using the direct oxidation of As(III) to As(V), while the World Health Organization's guideline value of arsenic for drinking water is 10 ppb, suggesting the method may have practical utility.     

Highly Sensitive Electrochemical Sensor for Nitric Oxide Using the Self‐Assembled Monolayer of 1,8,15,22‐Tetraaminophthalocyanatocobalt(II) on Glassy Carbon Electrode

Glassy carbon (GC) electrode modified with a self‐assembled monolayer (SAM) of 1,8,15,22‐tetraaminophthalocyanatocobalt(II) (4α‐Co^IITAPc) was used for the selective and highly sensitive determination of nitric oxide (NO). The SAM of 4α‐Co^IITAPc was formed on GC electrode by spontaneous adsorption from DMF containing 1 mM 4α‐Co^IITAPc. The SAM showed two pairs of well‐defined redox peaks corresponding to Co^III/Co^II and Co^IIIPc^?1/Co^IIIPc^?2 in 0.2 M phosphate buffer (PB) solution (pH 2.5). The SAM modified electrode showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO) by enhancing its oxidation current with 310 mV less positive potential shift when compared to bare GC electrode. In amperometric measurements, the current response for NO oxidation was linearly increased in the concentration range of 3×10^?9 to 30×10^?9 M with a detection limit of 1.4×10^?10 M (S/N=3). The proposed method showed a better recovery for NO in human blood serum samples.     

An Easy Process to Prepare a Copper(I)/Copper Sulfide Electrode and Its Behavior in Alkalimetric Titrations

Abstract

A copper sulfate (Cu₂S) film is formed on the surface of a copper wire by immersion in melted (>55°C) sodium thiosulfate, Na₂S₂O₃·5H₂O. This Cu₂S/Cu electrode is sensitive to sulfide ions and can be used in potentiometric titration of Na₂S solutions with copper(II) cations. Besides, as a novelty, it gives a good response to H⁺ cations at a wide pH range, even in alkaline medium, as checked in potentiometric titration of acetic and phosphoric acids. An analysis of a number of potentiometric measurements leads to interpretation of the electrode response in acidic/basic medium.     

Square wave anodic stripping voltammetric determination of lead(II) using a glassy carbon electrode modified with a lead ionophore and multiwalled carbon nanotubes

We report on a glassy carbon electrode (GCE) modified with a lead ionophore and multiwalled carbon nanotubes. It can be applied to square wave anodic stripping voltammetric determination of Pb(II) ion after preconcentration of Pb(II) at ?1.0?V (vs. SCE) for 300?s in pH?4.5 acetate buffer containing 400?μg?L^?1 of Bi(III). The ionophore-MWCNTs film on the GCE possesses strong and highly selective affinity for Pb(II) as confirmed by quartz crystal microbalance experiments. Under the optimum conditions, a linear response was observed for Pb(II) ion in the range from 0.3 to 50?μg?L^?1. The limit of detection (at S/N?=?3) is 0.1?μg?L^?1. The method was applied to the determination of Pb(II) in water samples with acceptable recovery.

The new Micro‐set for Adsorptive Stripping Voltammetric Simultaneous Determination of Nickel and Cobalt Traces in Aqueous Media

This article the first reports on a fabrication and application of an electrochemical three electrode micro‐set containing: in situ plated lead film on carbon fiber working microelectrode, Ag/AgCl reference electrode and a platinum wire counter electrode placed in one casing for simultaneous Ni(II) and Co(II) traces determination by square wave adsorptive stripping voltammetry (SW AdSV). Ni(II) and Co(II) in forms of their complexes with nioxime were accumulated on the lead film plated on a carbon fibers microelectrode during standard procedure of measurement. Thanks to the fact that measurements were performed in micro‐vessel of a volume of 200 μl small amounts of reagents were used to prepare samples for measurements. In addition, because of the use of microelectrode, sample solutions were not mixed during accumulation step of measurements. This fact creates the possibility of conducting fields analysis. The experimental parameters (composition of the supporting electrolyte, potential and time of accumulation) and possible interference effects were investigated. The linear calibration graphs for Ni(II) and Co(II) were in the range from 2×10^?9 to 1×10^?7 mol L^?1 and from 2×10^?10 to 1×10^?8 mol L^?1 for Ni(II) and Co(II), respectively. The correctness of the proposed method was checked by determining Ni(II) and Co(II) in the certified reference material (SPS‐SW1) with satisfactory results.     

Quartz crystal microbalance measurements of kinetic parameters of anodic dissolution of gold in thiocarbamide electrolytes in the presence of sulfide ions

As shown by quartz-crystal microbalance measurements, in the potential range from 0.0 to 0.55 V (NHE), sulfide ions adsorbed on the gold electrode surface accelerate the electrode reaction of anodic dissolution of gold in acidic thiocarbamide solutions. The microbalance determination of kinetic parameters at a constant electrode surface coverage with sulfide ions includes a special procedure developed for the determination of the gold dissolution rate. The conditions (the potential range and the potential scan rate) of independence of the dissolution rate from the diffusion limitations associated with the ligand delivery is determined. Under these conditions, the polarization curve is shown to be linear on semilogarithmic coordinates and correspond to the Tafel equation. In this potential range, the transfer coefficient α and the reaction order with respect to the ligand p are determined at a constant electrode surface coverage θ with adsorbed sulfide ions. It is shown that with the transition from the surface coverage with sulfide ions θ = 0.1 to θ = 0.8, the transfer coefficient α changes from 0.25 to 0.55, the exchange current (i ₀) changes from 10^?5 to 5 × 10^?5 A/cm², and the effective reaction order p with respect to the ligand changes from 0.2 to 1.3. The mentioned changes are associated not only with the acceleration of gold dissolution in the presence of chemisorbed sulfide ions but also with the changeover in the mechanism of this process. Quartz-crystal microbalance data on the gold dissolution rate qualitatively agree with the results of voltammetric measurements of a renewable gold electrode. A possible version of explanation of the catalytic effect of sulfide ion adsorption on the gold dissolution is put forward.     

Automated portable analyzer for lead(II) based on sequential flow injection and nanostructured electrochemical sensors

A fully automated portable analyzer for toxic metal ion detection based on a combination of a nanostructured electrochemical sensor and a sequential flow injection system has been developed in this work. The sensor was fabricated from a carbon paste electrode modified with acetamide phosphonic acid self-assembled monolayer on mesoporous silica (Ac-Phos SAMMS) which was embedded in a very small wall-jet (flow-onto) electrochemical cell. The electrode is solid-state and mercury-free. Samples and reagents were injected into the system and flowed through the electrochemical cell by a user programmable sequential flow technique which required minimal volume of samples and reagents and allowed the automation of the analyzer operation. The portable analyzer was evaluated for lead (Pb) detection due to the excellent binding affinity between Pb and the functional groups of Ac-Phos SAMMS as well as the great concern for Pb toxicity. Linear calibration curve was obtained in a low concentration range (1-25 ppb of Pb(II)). The reproducibility was excellent; the percent relative standard deviation was 2.5 for seven consecutive measurements of 10 ppb of Pb(II) solution. Excess concentrations of Ca, Ni, Co, Zn, and Mn ions in the solutions did not interfere with detection of Pb, due to the specificity and the large number of the functional groups on the electrode surface. The electrode was reliable for at least 90 measurements over 5 days. This work is an important milestone in the development of the next-generation metal ion analyzers that are portable, fully automated, and remotely controllable.     

Determination of sulfur contents of SO3, S2O3 and S based on the electrocatalytic interaction with homogeneous mediator tris(2,2'-bipyridyl)Ru(II)

A sensitive voltammetric method has been developed for the determination of total or single species of sulfur anions containing sulfide, sulfite and thiosulfate. The method is based on the catalytic effect of tris(2,2'-bipyridyl)Ruthenium(II) (Ru(bpy)₂^+ 2) as a homogeneous mediator on the oxidation of those anions at the surface of a glassy carbon electrode. A reversible redox couple of Ru(II)/Ru(III) were observed as a solute in aqueous solution. Cyclic voltammetry study showed that the catalytic current of the system depends on the concentration of the anions. Optimum pH values for voltammetric determination of sulfite, thiosulfate and sulfide has been found to be 5.6, 10.0 and 10.0, respectively. Under the optimized conditions the calibration curves have been obtained linear in the concentration ranges of 0.8–500.0, 0.4–1000.0 and 0.5–5000.0 µmol L^− 1 of SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The detection limits have been calculated to be 0.40, 0.17 and 0.33 µmol L^− 1 for SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The diffusion coefficients of sulfite and thiosulfate have been estimated using chronoamperometry. The chronoamperometric method also has been used to determine the catalytic rate constant for catalytic reaction of the Ru(bpy)₂^+ 2 with sulfite and thiosulfate. Finally the proposed method has been used for the determination of total sulfur contents in real samples of water and wastewater. Moreover the sulfite content in sugar and sulfur dioxide in air has been determined with satisfactory results.     

Ion chromatographic determination of sulfide and cyanide in real matrices by using pulsed amperometric detection on a silver electrode

The determination of free sulfide and cyanide by pulsed amperometric detection (PAD) at a silver-working electrode was improved through a deep de-oxygenation (at least 10 min) of both standard and real solutions containing the two analytes and adopting a two-potential waveform able to eliminate Ag working electrode fouling. The waveform stepped around the oxidation of Ag in the presence of 0.1-0.4 M hydroxyl ion, from -0.1 to 0.1 V versus saturated calomel electrode (SCE). The eluent composition (0.4 M NaOH plus 7.5 mM oxalate solution) allowed a very good column efficiency and selectivity. The presence of a polysulfide species was hypothesized in sulfide solutions that had not been de-oxygenated and aged. The polysulfide eluted just before sulfide and was confirmed by a chemical test with SO3(2-) producing the elimination of the polysulfide peak. Detection limits, according to the Hubaux-Vos method, were 1.0 and 2.0 microg/l for S2- and CN , respectively. We demonstrated good performance of the optimized method by repeatedly injecting standard solutions and by analyzing different real matrices. The method exhibited very good accuracy and repeatability (10 microg/l and a 500 microl injection loop, had a repeatability better than 3% for sulfide and 100 microg/l had a repeatability better than 1% for cyanide). The two-potential waveform ensured long-term stability of the electrode surface that required no manual polishing procedure for at least 1 month (20 analysis per day).     

Synthesis,characterization and electrochemical behavior of a new diimine-dioxime compound and its application in developing Hg(II)-selective membrane electrode

In this work, a new diimine-dioxime compound (N,N′-bis[1-biphenyl-2-hydroxyimino-2-(4-chloroanilino)-1-ethylidene]-1,4-phenylenediamine) was synthesized and characterized by a combination of elemental analyses, FT-IR, ¹H- and ¹³C-NMR spectra. The extraction ability of the new compound has been examined in chloroform by using several transition metal picrates such as Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cd(II) and Hg(II). It has been observed that diimine-dioxime compound shows a high affinity to Hg(II) ion. The electrochemical measurements of the compound were performed by cyclic voltammetry in acetonitrile solution at room temperature, and two irreversible oxidation waves were observed. A Hg(II)-selective electrode based on the diimine-dioxime compound has been developed. The electrode showed linear responses with Nernstian slopes of 33 ± 1 mV per decade over a wide concentration range (1.0 × 10^?2–8.0 × 10^?6 M). The limit of detection was 2.4 × 10^?6 M. The electrode has a response time about 10–15 s and it did not show a considerable divergence in its potential response over a period of 1 month. The proposed electrode revealed selectivity towards Hg(II) ion in the presence of various cations. The electrode could be used over a wide pH range of 4.0–9.0. The electrode can be successfully used as an indicator electrode for potentiometric titration of Hg(II) with EDTA.     

Inkjet Printed Multi‐walled Carbon Nanotube Sensor for the Detection of Lead in Drinking Water

Electroanalytical methods can be used for the reliable detection of the toxic heavy metal lead in drinking water samples. Inkjet printed electrodes have potential for the rapid and affordable assessment of drinking water. Researchers have shown the electrochemical sensing applicability of inkjet printed electrodes. In this work, Pb²⁺ was detected using an inkjet printed multi‐walled carbon nanotube (IJP‐MW‐CNT) electrode with silver tracks printed underneath. The silver tracks provide the sensor with the conductivity needed for sensitive measurements. MW‐CNT were dispersed in water using bile salts as a surfactant to prepare the ink. The IJP‐MW‐CNT electrode was used as the working electrode with a platinum wire and Ag/AgCl as auxiliary and reference electrode, respectively. The electrodes performance was optimized in 0.1 M acetate buffer (pH=4.3) and had two linear ranges of 5 to 20 ppb (R²=0.99) with a sensitivity of 38 nA/ppb and 20 to 50 ppb (R²=0.98) with a sensitivity of 15 nA/ppb and a limit of detection (LOD) of 1.0 ppb for Pb²⁺. The analytical applicability of electrode was determined by constructing a calibration curve in an unaltered drinking water sample (i. e.) Cincinnati tap water with two linear ranges of 15 to 40 ppb (R²=0.99) with a sensitivity of 1.5 nA/ppb and 40 to 70 ppb (R²=0.99) with a sensitivity of 3.5 nA/ppb and a LOD of 1.0 ppb for Pb²⁺. Effects of copper and cadmium as potential interferents are reported.     

Catalytic adsorptive stripping voltammetric determination of copper(II) on a carbon paste electrode

A catalytic adsorptive stripping voltammetric method for the determination of copper(II) on a carbon paste electrode (PCE) in an alizarin red S (ARS)-K₂S₂O₈ system is proposed. In this method, copper(II) is effectively enriched by both the formation and adsorption of a copper(II)-ARS complex on the PCE, and is determined by catalytic stripping voltammetry. The catalytic enhancement of the cathodic stripping current of the Cu(II) in the complex results from a redox cycle consisting of electrochemical reduction of Cu(II) ion in the complex and subsequent chemical oxidation of the Cu(II) reduction product by persulfate, which reduces the contamination of the working electrode from Cu deposition and also improves analytical sensitivity. In Britton-Robinson buffer (pH 4.56±0.1) containing 3.6×10⁻⁵ mol L⁻¹ ARS and 1.6×10⁻³ mol L⁻¹ K₂S₂O₈, with 180 s of accumulation at −0.2 V, the second-order derivative peak current of the catalytic stripping wave was proportional to the copper(II) concentration in the range of 8.0×10⁻¹⁰ to ∼3.0×10⁻⁸ mol L⁻¹. The detection limit was 1.6×10⁻¹⁰ mol L⁻¹. The proposed method was evaluated by analyzing copper in water and soil.     

H2S气敏电极的研制、性能及其初步应用

本文报告了用全固态Ag₂S电极做指示电极和全固态氟离子电极做参比电极所研制的H₂S气敏电极的结构、性能及其在印染污水分析中的初步应用。电极的线性范围5×10^-8-1×10^-2MS^2-,响应快,重现性较好。除浓度较高的CN^-、I^-和CNS^-有干扰外,其他常见阴离子无干扰。对印染污水用电极悬空测定(加入稀释法),试液不需任何处理,也不沾污电极。方法简便、快速,能满足控制分析要求。     

Microliter Volume Determination of Cosmetic Mercury with a Partially Crosslinked Poly(4‐vinylpyridine) Modified Screen‐Printed Three‐Electrode Portable Assembly

We successfully demonstrated microliter (μL) volume determination of Mercury (Hg) using an in‐built screen‐printed three electrodes containing partially crosslinked poly(4‐vinlylpyridine) (designated as pcPVP) modified carbon‐working, carbon‐counter, and Ag⁺‐quasireference electrodes (SPE/pcPVP) in a pH 4 acetate buffer solution with 2 M KCl by using the square wave anodic stripping voltammetric (SWASV) technique. Instrumental and solution phase conditions were systematically optimized. Experiments were carried out by simply placing a 500 μL‐droplet of Hg containing real sample mixed with the base electrolyte on the SPE/pcPVP surface. The SPE/Ag⁺ quasi‐reference system shifted the Hg‐SWASV detection potential ca. 250 mV positive, but the quantitative current values were appreciably similar to that of a standard Ag/AgCl reference electrode. Under optimal condition, the calibration graph is linear in the window of 100–1000 ppb of the Hg droplet system with a detection limit of 69.5 ppb (S/N=3). Finally real sample assays were demonstrated for prohibited cosmetic Hg containing skin‐lightening agents in parallel with ICP‐OES measurements.