Determination of cadmium in tobacco smoke and zinc in tap water by solvent extraction flame atomic absorption spectrometry

Procedures are described for the determination of cadmium in tobacco smoke and zinc in tap water by flame atomic absorption spectrometry after chelation with benzyl 2-pyridyl ketone 2-pyridylhydrazone and extraction with isobutyl methyl ketone. Calibration graphs in the organic layer were linear up to 1.3 g/ml, with sensitivities of 80 ng/ml (Zn) and 71ng/ml (Cd), and limits of detection of 49 ng/ml for zinc and 38 ng/ml for cadmium. RSD values were 2.9% at 0.42 g/ml (Cd) and 4.7% at 0.17 g/ml (Zn).     

Determination of cadmium and zinc in waters by flame atomic absorption spectrometry after cloud-point extraction

Phase separation of nonionic surfactants in aqueous solutions was used to extract cadmium and zinc. After complexation with 6-(4-nitrophenyl)-2,4-diphenyl-3,5-diazabicyclo[3.1.0]hexene-2 (pH 1), cadmium and zinc were quantitatively transferred into the phase rich with the nonionic surfactant octylphenoxypolyethoxyethanol. After the addition of tetrahydrofuran and HCl to the extract, the elements were determined by flame atomic absorption spectrometry.     

Determination of cadmium and zinc in water samples by flame atomic absorption spectrometry after cloud-point extraction

The phase-separation phenomenon of nonionic surfactants occurring in an aqueous solution was used for the extraction of Cd and Zn from water samples. After complexation with 6-(4-nitrophenyl)-2,4-diphenyl-3,5-diaza-bicyclo[3.1.0]hex-2-ene (NDDBH) in hydrochloric acid medium (pH 1), the analytes were quantitatively extracted after centrifugation into the phase rich in the nonionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). Tetrahydrofuran acidified with 0.1 M HCl was added to the surfactant-rich phase prior to its analysis by flame atomic absorption spectrometry. The adopted concentrations for NDDBH, Triton X-114 and hydrochloric acid were all optimized. Detection limits (3σ) of 0.33 and 0.85 ng/mL along with enrichment factors of 157 and 118 for Cd and Zn, respectively, were achieved. The proposed method was applied to the determination of Cd and Zn in acidic solutions of certified reference materials. A comparison with certified values was performed for an evaluation of the accuracy, resulting in a good agreement according to the t-test at a 95% confidence level. The high efficiency of the cloud-point extraction to carry out the determination of the studied analytes in complex matrices was, therefore, demonstrated. The text was submitted by the authors in English.     

Effect of solvent extraction on the atomic-absorption spectrophotometric determination of traces of copper with zinc dibenzyldithiocarbamate

Summary The utility of various organic solvents, such as acetates and ketones, for the CuDBC chelate extraction and subsequent atomic absorption spectrophotometric determination is studied. Methyl propionate was found to be the most sensitive solvent. Data for the different substances are presented.

---

Einfluß der Lösungsmittelextraktion auf die AAS-Bestimmung von Kupferspuren mit Zinkdibenzyldithiocarbamat

Zusammenfassung Die Verwendbarkeit verschiedener Lösungsmittel (Acetate und Ketone) für die Extraktion des CuDBC-Komplexes und anschließende atomabsorptions-spektralphotometrische Bestimmung wurde systematisch untersucht. Werte für die verschiedenen Substanzen werden angegeben. Die größte Empfindlichkeit kann mit Methylpropionat erzielt werden.

We wish to thank President Dr. Yawara Yoshitoshi and Prof. Dr. Nobuo Sakurai of Hamamatsu University School of Medicine, for their hospitality and encouragement.     

Atomic absorption spectrophotometric determination of microgram quantities of copper in tea after solvent extraction

An atomic absorption spectrophotometric method is described for determining trace amounts of copper in tea. The method is based on the solvent extraction of the metal as tetraiodocuprate (I), from 2 M HCl solutions of tea samples which contain 12% (w/v) KI, into methylisobutyl ketone. The organic extracts, containing the ion-association complex of copper are atomized into an air-acetylene flame. The limit of detection is 1.14 micrograms g-1 Cu.     

Determination of cadmium, copper, lead and zinc in water samples by flame atomic absorption spectrometry after cloud point extraction

Cloud point extraction (CPE) has been used for the simultaneous pre-concentration of cadmium, copper, lead and zinc after the formation of a complex with 1-(2-thiazolylazo)-2-naphthol (TAN), and later analysis by flame atomic absorption spectrometry (FAAS) using octylphenoxypolyethoxyethanol (Triton X-114) as surfactant. The chemical variables affecting the separation phase and the viscosity affecting the detection process were optimized. At pH 8.6, pre-concentration of only 50 ml of sample in the presence of 0.05% Triton X-114 and 2×10⁻⁵ mol l⁻¹ TAN permitted the detection of 0.099, 0.27, 1.1 and 0.095 ng ml⁻¹ cadmium, copper, lead and zinc, respectively. The enhancement factors were 57.7, 64.3, 55.6 and 63.7 for cadmium, copper, lead and zinc, respectively. The proposed method has been applied to the determination of cadmium, copper, lead and zinc in water samples and a standard reference material (SRM).     

Determination of cadmium(II) ion by atomic absorption spectrometry after cloud point extraction

In this work, cloud point extraction (CPE) technique was developed for the separation and pre-concentration of Cd(II). CPE was used with lipophilic hexadentate (N₄O₂) Schiff base ligand, L_22pysa (1, C₂₄H₂₆N₄O₂). The methodology is based upon the formation of a Cd(II)/L complex soluble in a micellar phase the non-ionic surfactant Triton X-114. This complex is then extracted into the surfactant-rich phase above its cloud point temperature. Several important variables that affect the CPE were investigated and optimized. Under the optimum experimental conditions, the calibration graph was linear over the range 1?C100?ng?mL^?1 with a correlation coefficient of 0.9997. The detection limit obtained under optimum conditions was 0.44?ng?mL^?l. The proposed method was successfully applied to the determination of Cd(II) in rice and various water samples.     

The solvent extraction of zinc with dithizone

The extraction of 10^-5M zinc ion from aqueous solution into an organic solvent 1.8 . 10–3m in dithizone has been investigated. The effects of pH, other ions in the aqueous phase including ions which complex with zinc, and various organic solvents have been investigated. Ions which complex with zinc (citrate, oxalate, nitrilotriacetate, ethylenediaminetetracetate) change the position and/or shape of the extraction curve. Changes in the organic solvent alter the position of the curve, this alteration being qualitatively related to the solubility of dithizone in the organic solvent. Spectra for dithizone and for zinc dithixonate in several organic solvents have also been determined.     

Determination of zinc in water samples by flame atomic absorption spectrometry after homogeneous liquid-liquid extraction

In this study, a new and simple homogeneous liquid-liquid extraction (HLLE) method based on a pH-independent phase-separation process was developed using a ternary solvent system [water-tetrabutylammonium ion (TBA ⁺)-chloroform] for the preconcentration of Zn²⁺ ions. A Schiff’s base ligand was used as the chelating agent prior to Zn²⁺ ions extraction. Flame atomic absorption spectrophotometry using acetylene-air flame was used for the quantification of analyte after preconcentration. The phase separation occurred due to ion-pair formation of TBA and perchlorate ion. The sedimented phase was then separated using a 100 μL micro-syringe and diluted to 1.0 mL with ethanol. The sample was introduced into the flame by conventional aspiration. After the optimization of complexation and extraction conditions such as pH 9.0, [ligand] = 1.0 × 10⁻⁵ M, [TBA⁺] = 2.0 × 10⁻² M, 100.0 μL of [CHCl₃] and [CLO₄⁻] = 2.0 × 10⁻² M, a preconcentration factor of 100 was achieved for only 10 mL of the sample. The relative standard deviation was 2.3% (n = 10). The limit of detection was sufficiently low and at ppb level. The proposed method was applied to the extraction and determination of Zn²⁺ in natural water samples with satisfactory results.     

Determination of cadmium in water samples by graphite furnace atomic absorption spectrometry after cloud point extraction

The formation of a complex with 2-(5-brom-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP) and cloud point extraction have been applied to the preconcentration of cadmium followed by its determination by graphite furnace atomic absorption spectrometry (GFAAS) using octylphenoxypolyethoxyethanol (TritonX-114) as surfactant. The chemical variables affecting the separation were optimized. At pH 7.0, preconcentration of only 10 mL of sample in the presence of 0.05% TritonX-114 and 2.5 × 10⁻⁶ M 5-Br-PADAP enabled the detection of 0.04 μg/L cadmium. The enrichment factor was 21 for cadmium. The regression equation was A = 0.0439C(μg/L) + 7.2 × 10⁻³. The correlation coefficient was 0.9995. The precision for 10 replicate determinations at 10 μg/L Cd was 2.7% relative standard deviation (RSD). The proposed method has been applied to the determination of cadmium in water samples. The text was submitted by the authors in English.     

Ultratrace determination of cadmium by cold vapor atomic absorption spectrometry after preconcentration with a simplified cloud point extraction methodology

A simplified micelle-mediated extraction methodology for the preconcentration of ultratrace levels of cadmium as a prior step to its determination by cold vapor atomic absorption spectrometry (CV-AAS) has been developed. The methodology is based on the cloud point extraction (CPE) of cadmium at pH 8 by using the non-ionic surfactant polyethyleneglycolmono-p-nonylphenylether (PONPE 7.5) without adding any chelating agent. Cadmium cold vapor was generated from 2 ml of the extracted surfactant-rich phase by means of sodium tetrahydroborate (3%, w/v) as a reducing agent and hydrochloric acid (0.2 mol l⁻¹) as a carrier solution. Several important variables that affect the cloud point extraction and cold vapor cadmium generation efficiency were investigated and optimized. The preconcentration of only 50 ml of solution in the presence of 0.06% (v/v) PONPE 7.5 gives an enhancement factor of 62. The calibration graph using the preconcentration system was linear in the range of 4-100 ng l⁻¹ with a correlation coefficient of 0.9992. Detection limit (3 s) obtained in the optimal conditions was 0.56 ng l⁻¹. The relative standard deviation (R.S.D.) for six replicate determinations at 20 ng l⁻¹ Cd level was 3.2%. The proposed method was successfully applied to the ultratrace determination of cadmium in water samples.     

原子吸收和原子荧光光谱分析

本文是《分析试验室》期刊定期评述中关于原子吸收光谱(AAS)及原子荧光光谱(AFS)分析的第11篇综述文章. 文中对2004年12月～2007年4月期间我国在AAS/AFS领域所取得的主要进展进行评述. 内容包括概述、仪器装置与数据处理、火焰原子吸收光谱法、电热原子吸收光谱法、化学蒸气发生技术以及原子荧光光谱法等. 收集文献670篇.     

流动注射在线萃取-火焰原子吸收法测定食用盐中的锌

基于锌与 1 (2 吡啶偶氮 ) 2 萘酚 (简称PAN)形成的配合物可被氯仿萃取 ,从高盐基体样品中分离富集锌 ,利用自行设计的分相器 ,实验确定了最佳的流动注射在线萃取 火焰原子吸收光度法测定锌的流路系统和化学反应条件。在选定的工作条件下 ,其RSD和检出限分别为 4 3 % (c=0 6 μg/mL ,n =1 1 )和0 0 3 μg/mL ,测定速度为 2 5样 /h。用于实际样品的测定 ,加标回收率为 97%～1 0 6 %。     

Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry

An automated sequential injection (SI) on-line solvent extraction-back extraction separation/preconcentration procedure is described. Demonstrated for the assay of cadmium by electrothermal atomic absorption spectrometry (ETAAS), the analyte is initially complexed with ammonium pyrrolidinedithiocarbamate (APDC) in citrate buffer and the chelate is extracted into isobutyl methyl ketone (IBMK), which is separated from the aqueous phase by means of a newly designed dual-conical gravitational phase separator. A metered amount of the organic eluate is aspirated and stored in the PTFE holding coil (HC) of the SI-system. Afterwards, it is dispensed and mixed with an aqueous back extractant of dilute nitric acid containing Hg(II) ions as stripping agent, thereby facilitating a rapid metal-exchange reaction with the APDC ligand and transfer of the Cd into the aqueous phase. The aqueous phase is separated in a second dual-conical gravitational phase separator, and 30 μl of it is entrapped and metered in a sample loop (SL) and subsequently introduced via air segmentation into the graphite tube for analyte quantification. The ETAAS determination is performed in parallel with the separation/preconcentration process of the ensuing sample. An enrichment factor of 21.4, a detection limit of 2.7 ng l⁻¹, along with a sampling frequency of 13 h⁻¹ were obtained at a sample flow rate of 6.0 ml min⁻¹. The precision (R.S.D.) at the 0.4 μg l⁻¹ level was 1.8% as compared to 3.2% when quantifying the organic extractant directly. The applicability of the procedure is demonstrated for the determination of trace levels of cadmium in three certified reference materials.     

Atomic absorption spectroscopic determination of arsenic in antimony compounds using solvent extraction and arsine generation

Summary An arsine generation-atomic absorption spectroscopic method for the determination of 0.04–4000 p. p. m. of arsenic in antimony compounds is described. The interference from antimony and other elements is eliminated by solvent extraction with benzene. The sample is dissolved in concentrated hydrochloric acid and reduced with titanium(III) chloride. Arsenic(III) is extracted into benzene from 10–12N hydrochloric acid at which concentration no antimony (III) is extracted; arsenic(III) is then back-extracted into water. Arsine is generated with potassium iodide, tin(II) chloride and zinc powder from 2.4N hydrochloric acid solution, and introduced to a nitrogen-hydrogen flame. The method has been tested with various antimony samples.

---

Zusammenfassung Für die Bestimmung von 0,04–4000 ppm Arsen in Antimonverbindungen wurde ein Verfahren zur Arsinbildung und Atomarabsorption entwickelt. Die Störung durch Antimon und andere Elemente wurde durch Extraktion mit Benzol beseitigt. Die Probe wird in konz. Salzsäure gelöst und mit Titan(III)chlorid reduziert. Arsen(III) wird aus 10–12N Salzsäure mit Benzol extrahiert, ohne daß Antimon(III) mitextrahiert wird; As(III) wird dann in Wasser rückextrahiert. Mit Kaliumjodid, Zinn(II)chlorid und Zinkpulver wird aus 2,4N salzsaurer Lösung Arsin entwickelt und in eine Stickstoff-Wasserstoff-Flamme geleitet. Das Verfahren wurde mit verschiedenen Antimonproben getestet.

     

Determination of traces of iron in indium phosphide by electrothermal atomic absorption spectrometry combined with solvent extraction

An electrothermal atomic absorption (ETAAS) method for the determination of traces of iron (0.1-1.0 microgram g-1) in Fe-doped indium phosphide (InP) has been developed. In order to overcome the indium matrix-effect and to achieve a useful detection limit, a preliminary solvent-extraction of Fe(III) with acetylacetone (HAA) is necessary. After sample dissolution with hydrochloric acid (1 + 1) the digest is evaporated to dryness, Fe(II) is oxidized to Fe(III) with nitric acid, the residue is dissolved in 0.01 mol L-1 HCl and the iron is extracted at pH 2.0 with 0.5 mol L-1 HAA in toluene. The organic phase is injected into the graphite furnace and the iron is directly evaluated by external organic standard calibration. The limit of detection (3SB) resulting from further in-situ preconcentration is 0.03 microgram g-1. When the method was applied to the analysis of real samples containing 0.2-0.7 microgram g-1 Fe, the RSD was in the range 8-21%. Results were compared with those independently obtained on the decomposed sample solution with inductively coupled atomic emission spectrometry (ICP-AES). The detection limit of the ICP-AES method, that needs matrix-matched standards, is 0.20 microgram g-1.     

Atomic absorption spectrometry — pregnant again after 45 years

Because atomic absorption spectrometry (AAS) seems to be so simple at first glance, its forthcoming end and replacement by more exciting techniques has been forecasted more than once over the past 45 years. However, AAS has received strong impetus again and again, e.g. by the introduction of the graphite furnace technique, and of flow injection, to mention but a few. Although more and more researchers, and even more instrument manufacturers are turning their back on AAS these days, this author believes that AAS is about to give birth to new offspring in the very near future. The most important ones are solid sampling and speciation analysis on the application side, a much deeper exploitation of the potential of flow injection analysis, the use of diode lasers as radiation sources, and the introduction of continuum-source AAS on the instrumental side. The latter could replace conventional line-source AAS in the foreseeable future because of its obvious advantages in essentially all analytical aspects.     

Separation and determination of cadmium and zinc as their thenoyltrifluoroacetone complexes with dibenzo-18-crown-6 by means of synergistic extraction and atomic absorption spectrometry

 A new method for the separation and determination of trace amounts of cadmium and zinc in water as their thenoyltrifluoroacetone (TTA) complexes with dibenzo-18-crown-6 (DB18C6) in o-dichlorobenzene has been established by means of synergistic extraction and back-extraction combined with atomic absorption spectrometry. The effect of various factors (synergism with TTA and DB18C6, shaking time, composition of the extracted species, and mutual separation etc.) on the extraction and back-extraction of cadmium and zinc has been in- vestigated. When the mixtures were extracted for 4 min at pH 4.9, only zinc was extracted quantitatively, whereas cadmium remained in the aqueous phase. After the phases were separated, cadmium was again extracted quantitatively at pH 7.5. Then, the two phases were each shaken with 0.05–0.1 mol/l HCl in order to back-extract cadmium and zinc from the organic phases; the ions were determined individually by atomic absorption spectrometry. In the process cadmium and zinc TTA chelates in o-dichlorobenzene form stable adducts with DB18C6 (Cd(TTA)₂ ⋅ nDB18C6 and Zn(TTA)₂ ⋅ nDB18C6, n=0∼2). The stability constants (βn) of the adducts determined by means of the curve fitting method were log β₁=4.62 and log β₂=6.74 for cadmium, and log β₁=3.48 and log β₂=5.18 for zinc. Received: 8 September 1995/Revised: 22 January 1996/Accepted: 24 January 1996