Heat capacities, order-disorder transitions, and thermodynamic properties of rare-earth orthoferrites and rare-earth iron garnets

Rare-earth orthoferrites, RFeO₃, and rare-earth iron garnets (RIGs) R₃Fe₅O₁₂ (R=rare-earth elements) were prepared by citrate-nitrate gel combustion method and characterized by X-ray diffraction method. Isobaric molar heat capacities of these oxides were determined by using differential scanning calorimetry from 130 to 860 K. Order-disorder transition temperatures were determined from the heat capacity measurements. The Néel temperatures (T_N) due to antiferromagentic to paramagnetic transitions in orthoferrites and the Curie temperatures (T_C) due to ferrimagnetic to paramagnetic transitions in garnets were determined from the heat capacity data. Both T_N and T_C systematically decrease with increasing atomic number of R across the series. Lattice, electronic and magnetic contributions to the total heat capacity were calculated. Debye temperatures as a function of absolute temperature were calculated for these compounds. Thermodynamic functions like , , H^o, G^o, , , , , and have been generated for the compounds RFeO₃(s) and R₃Fe₅O₁₂(s) based on the experimental data obtained in this study and the available data in the literature.     

Systems R-Fe-O (R=Ho, Er): Thermodynamic properties of ternary oxides using differential scanning calorimetry and solid-state electrochemical cells

The thermodynamic properties of three different types of ternary oxides RFeO₃(s), R₃Fe₅O₁₂(s) and RFe₂O₄(s) (where R=Ho and Er) have been determined by calorimetric and solid-state galvanic cell methods. Heat capacities of RFeO₃(s) and R₃Fe₅O₁₂(s) have been determined by differential scanning calorimetry from 130 to 860 K. Heat capacity measurements from 130 to 860 K revealed λ-type anomalies for RFeO₃(s) and R₃Fe₅O₁₂(s) compounds which are assigned due to magnetic order-disorder transitions. The oxygen chemical potentials corresponding to the three-phase equilibria involving these ternary oxides have been determined by using solid-state electrochemical cells. The standard molar Gibbs energies of formation of RFeO₃(s), R₃Fe₅O₁₂(s) and RFe₂O₄(s) have been computed from the oxygen potential data. Based on the thermodynamic information, oxygen potential diagrams have been computed for the systems R-Fe-O (R=Ho and Er) at two different temperatures: T=1250 and 1450 K. Thermodynamic functions like , , H^o, G^o, , , , , and have been generated for the compounds RFeO₃(s) and R₃Fe₅O₁₂(s) based on the experimental data obtained in this study and the available data in the literature.     

Investigation of Separation and Identification Possibilities of Some Metal-Dithizonate Complexes by Sequential TLC-IR System

The separation and identification possibilities of a number of metal–dithizonate complexes were investigated by means of a TLC-IR sequential system. Dithizonate complexes of some metal cations were pre-pared in a predetermined optimum pH or pH range. Optimum separation conditions of these complexes and the reproducibility of their R _f values were investigated on a series of precoated or laboratory-made TLC plates. R _f values were determined by using the one-dimensional ascending technique. The precision of the procedures was determined for replicates in terms of standard deviation. Detection limits were also determined for each metal complex. The IR spectra were scanned and interpreted for precise identification after preconcentration with the wick-stick procedure for complexes giving overlapped R _f values. The complexes were able to be identified with the aid of IR absorption bands. It has been determined that these IR absorption bands will also be able to be used as reference spectral bands in possible quantitative studies. It has been concluded that an effective and successful qualitative analysis will be executable for incompletely separated complex compounds using an IR spectrophotometer as a TLC detector.     

Magnetic properties of ammonia intercalates of some IV B and V B transition metal disulfides

Intercalates 3RVS₂NH₃ and 3RTaS₂NH₃, isostructural with 3RTiS₂NH₃, are described for the first time. Magnetic properties of 3RTiS₂NH₃, 3RVS₂NH₃, and 2HTaS₂NH₃ respectively are interpreted in terms of a charge transfer (in agreement with an ionic model) from the intercalant to the lowest conduction band which consists mainly ofe_g, a_1g anda′₁ transition metald states.     

Reactivity and characterisation of various rank turkish bituminous coal chars

A set of seven bituminous coal chars has been characterised by IR spectroscopy (FTIR), thermogravimetry (TG) and elemental analysis. FTIR study provided suitable information to establish differences between coal samples according to their chemical compositions. The reactivity of these samples was also studied and correlated with the coal parameters of mean vitrinite reflectance, fuel ratio and H/C ratio. The data suggest that reactivity as determined can be correlated with the mean vitrinite reflectance, fuel ratio and H/C ratio (0.90). The order of reactivity of samples were; Amasra (S1) (R _m= 0.65)>Azdavay (S4) (R _m=0.99)»Armutcuk (S2) (R _m=0.81)»Acenta (S3) (R _m=0.92)>Ac2l2k (S6) (R _m=1.11) Cay (S5) (R _m=1.03)>Sogutozu (S7) (R _m=2.14).     

Use of Suzuki cross-coupling as a route to 2-phenoxy-6-iminopyridines and chiral 2-phenoxy-6-(methanamino)pyridines

The anisyl boronic acids, 2-OMe-3-R²-5-R¹-C₆H₂B(OH)₂ (R¹=R²=H (a); R¹=H, R²=Ph (b); R¹=Me, R²=H (c); R¹=Cl, R²=H (d); R¹=t-Bu, R²=H (e)), have been employed in Suzuki cross-coupling reactions with either 2-bromo-6-formylpyridine (I) or 2-bromo-6-acetylpyridine (II) generating, following a facile deprotection step, the 2-phenoxy-6-carbonylpyridines, 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-(CHO)C₅H₃N (R¹=R²=H (1a); R¹=Me, R²=H (1c); R¹=Cl, R²=H (1d); R¹=t-Bu, R²=H (1e)) and 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-(CMeO)C₅H₃N (R¹=R²=H (2a); R¹=H, R²=Ph (2b)). Condensation reactions of 1 and 2 with 2,6-diisopropylaniline proceed smoothly to give the 2-phenoxy-6-iminopyridines, 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-{CHN(2,6-i-Pr₂C₆H₃)}C₅H₃N (R¹=R²=H (3a); R¹=Me, R²=H (3c); R¹=Cl, R²=H (3d); R¹=t-Bu, R²=H (3e)) and 2-(2′-OH-3′-R²-5′-R²-C₆H₂)-6-{CMeN(2,6-i-Pr₂C₆H₃)}C₅H₃N (R¹=H, R²=Ph (4a), R¹=H, R²=Ph (4b)). Reduction of the imino unit (and concomitant C-C bond formation) in 3 can be achieved by treatment with trimethylaluminium or methyllithium which, following hydrolysis, furnishes the racemic chiral 2-phenoxy-6-(methanamino)pyridines, 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-{CHMe-NH(2,6-i-Pr₂C₆H₃)}C₅H₃N (R¹=R²=H (5a); R¹=Me, R²=H (5c); R¹=Cl, R²=H (5d); R¹=t-Bu, R²=H (5e)). This work represents a straightforward and rapid synthetic route to libraries of sterically and electronically variable phenoxy-substituted imino- and methanamino-pyridines, which are expected to act as useful ligands or proligands for late and early transition metal-mediated alkene polymerisation catalysis.     

Synthesis of Cu(II) and Mn(III) Complexes Involving Derivatives of Pyridine

Two complexes with derivatives of pyridine as ligands were synthesized and characterized. From the reaction of 2-pyridinecarboxaldehyde oxime with Cu(OAc)₂ · H₂O afforded the complex C₂₀H₃₀N₆O₁₂Cu₃ (I), and the use of 3-hydroxy-2-pyridinecarboxylic acid with anhydrous MnCl₂ · 4H₂O led to the formation of another complex C₁₂H₁₄N₂OCl₂Mn (II). They were characterized by X-ray diffraction (CIF files CCDC nos. 568718 (I) and 1568880 (II)), NMR, IR and elemental analysis. For I: terigonal, space group R\(\bar 3\)/H, a = 42.548(3), c = 10.2774(9) Å, V = 16113(2) ų, Z = 18, ρ_calcd = 1.367 Mg/m³, the final R factor was R₁ = 0.0945, 6662 for reflections were observed with I > 2σ(I), wR = 0.162 for all data. For II: triclinic, Pī, a = 5.6174(9), b = 7.7259(13), c = 9.7160(16) Å, α = 70.444(3)°, β = 88.009(3)°, γ = 89.818(3)°, V = 397.09(11) ų, Z = 1, ρ_calcd = 1.840 Mg/m³, the final R factor was R₁ = 0.0281, 4280 for reflections were observed with I > 2σ(I), wR = 0.0775 for all data.     

Differentiation of isomeric allylic alkenyl methyl ethers by Raman spectroscopy

The Raman spectra of several pairs of alkenyl methyl ethers of general structure R¹R²CCR⁵C(R³R⁴)OCH₃ and R¹R²C(OCH₃)C(R⁵)CR³R⁴ (R¹, R², R³, R⁴, R⁵ = H or C_nH_2n+1, n = 1-3) are reported and discussed, with a view to establishing whether Raman spectroscopy offers a viable means of distinguishing between these isomeric unsaturated species. Key bands associated with the ν(sp₂CH) and ν(CC) stretching modes are found to be particularly useful in this connection: R¹R²CCHCH₂OCH₃ and R¹R²C(OCH₃)CHCH₂ ethers (R¹, R² = CH₃, C₂H₅) are easily distinguished on this basis. Differentiation of their lower homologues, R¹CHCHCH₂OCH₃ and R¹CH(OCH₃)CHCH₂ (R¹ = CH₃, C₂H₅, C₃H₇), by similar means is also quite straightforward, even in cases where cis and trans isomers are possible. Pairs of isomeric ethers, such as CH₃CHC(CH₃)CH₂OCH₃ and CH₃CH(OCH₃)C(CH₃)CH₂, in which the structural differences are more subtle, may also be distinguished with care. Deductions based on bands ascribed to the stretching vibrations are usually confirmed by consideration of the signals associated with the corresponding δ(sp₂CH) deformation vibrations. Even C₂H₅CHCHCH(C₃H₇)OCH₃ and C₃H₇CHCHCH(C₂H₅)OCH₃ are found to have distinctive Raman spectra, but differentiation of these closely related isomers requires additional consideration of the low wavenumber region.     

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands: Synthesis, characterization and ethylene polymerization

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands, bis((3,5-di-tert-butyl-C₆H₂-2-O)R₁CN (2-R₂-C₆H₄))ZrCl₂ {R₁ = Me, R₂ = H (2a); R₁ = Et, R₂ = H (2b); R₁ = Ph, R₂ = H (2c); R₁ = 2-Me-Ph, R₂ = H (2d); R₁ = 2-F-Ph, R₂ = H (2e); R₁ = 2-Cl-Ph, R₂ = H (2f); R₁ = 2-Br-Ph, R₂ = H (2g); R₁ = Ph, R₂ = Me (2h); R₁ = Ph, R₂ = F (2i)}, have been prepared, characterized and tested as catalyst precursors for ethylene polymerization. Crystal structure analysis reveals that complex 2c has a six coordinate center in a distorted octahedral geometry with trans-O, cis-N, cis-Cl arrangement which possesses approximate C₂ symmetry. When activated with methylaluminoxane (MAO), complexes 2a-2i exhibited high ethylene polymerization activities of 10⁶-10⁸ g PE (mol M h)⁻¹. Compared with the bis(phenoxyimine) zirconium analogues bis((3,5-di-tert-butyl-C₆H₂-2-O)CHNC₆H₅)ZrCl₂ (3), the introduction of substituent on the carbon atom of the imine double bond enhanced the catalytic activity and molecular weight of prepared polyethylene. Especially, when the H atom at the carbon atom of the imine double bond was replaced by 2-fluoro-phenyl with strong electronic-withdrawing property, complex 2e displayed the highest catalytic activity, and the polyethylene obtained possessed the highest molecular weight and melt point.     

Synthesis, characterization, and applications in Heck and Suzuki coupling reactions of amphiphilic cyclopalladated ferrocenylimines

A series of novel amphiphilic ferrocenylimines and their cyclopalladated complexes of general formula [Fe(η⁵-C₅H₅)(η⁵-C₅H₄CR₁NR₂)] (R₁=H, R₂=C₁₂H₂₅-n4a, R₁=H, R₂=C₁₆H₃₃-n4b, R₁=CH₃, R₂=C₁₂H₂₅-n4c, R₁=CH₃, R₂=C₁₆H₃₃-n4d), [PdCl{[(η⁵-C₅H₅)]Fe[(η⁵-C₅H₃)CR₁NR₂]}]₂ (5a-d), [PdCl{[(η⁵-C₅H₅)]Fe[(η⁵-C₅H₃)-CR₁NR₂]}(PPh₃)] (6a-d), were prepared and characterized by ¹H NMR, ¹³C NMR, ³¹P NMR, IR, HRMS, and elemental analysis. The crystal structures of 5c,d were determined by X-ray crystallography. These amphiphilic cyclopalladated complexes are thermally stable and insensitive to oxygen and moisture. The redox properties of 4a-d, 5a-d, 6a-d were also investigated using cyclic voltammetric technique. Compounds 5a-d, 6a-d displayed good activity in the Heck reaction of a variety of aryl halides with ethyl acrylate or styrene and the Suzuki-Miyaura cross-coupling reaction of aryl bromides with phenylboronic acid in bulk solution. They are also suitable for formation of Langmuir-Blodgett (LB) films.     

Trimethylaluminium-induced diastereoselective methylation onto ethyl 2-oxocyclopentane-1-carboxylate and isomerization between the dimethylaluminium-alkoxide products

Methylation of α-disubstituted cyclopentanone 1 with Me₃Al in CH₂Cl₂ at 0 °C for 30 min gave diastereoselectively a mixture of (1R*,2S*)-2 and (1R*,2R*)-2 in a 96:4 ratio and 83% total yield. When the same methylation was carried out at 0 °C for 1 h and then at room temperature for 120 h, a diastereomeric mixture of (1R*,2S*)-2 and (1R*,2R*)-2 was obtained in a 12:88 ratio and in 88% total yield. The stereochemistry of the two diastereomers was determined by the results of acetalization of their diol derivatives 3 and 5. Isomerization between the Me₂Al-alkoxides of (1R*,2S*)-2 and (1R*,2R*)-2 and its possible mechanism were investigated by HPLC analysis of the methylation reaction process at 0 °C for 1 h and then at room temperature for 56 h and also by their mutual epimerization reactions.     

Thin layer chromatographic studies of anils II. Separation,identification and determination

Thin layer chromatographic behaviour of ten anils was studied on silica gel adsorbent mixed with starch binder with ten solvent systems. Simultaneous separation, identification and determination of ternary mixtures of isomers was stressed. TheR _F increasing order was found to be dependent on the solvent and independent of the degree of saturation of the chamber. The correlations ofR _F with _max and (C=O) of isomers were established and used in their identification. Six anils were separated in methanol—benzene (11).     

Structure elucidation and X-ray crystallographic study of 3-(naphth-1-ylmethyl)indole

Synthesis and structure determination of 3-(naphth-1-ylmethyl)indole are reported. The molecular and crystal structures together with the molecular formula were determined by spectral and single crystal X-ray studies. X-ray crystallography revealed the presence of two conformers arising from the flipping of the naphthalene unit. The crystal of the compound belongs to the triclinic crystal system and space group \(P\bar 1\). Crystal data are as follows: a = 10.302(5) Å, b = 12.522(4) Å, c = 13.383(4) Å, α = 111.9(1)°, β = 116.86(6)°, γ = 71.65(5)°; V = 1726.429 ų; Z = 4. The final R and Rw are R = 0.0744 (on observed F′s); R = 0.0924 (all F data), R _w = 0.1757 (observed F ²) and R _w = 0.1834 (all F ² data).     

Thermoelectric and structural properties of a new Chevrel phase: Ti0.3Mo5RuSe8

The new Chevrel phase Ti_0.3Mo₅RuSe₈ has been synthesized and characterized by quantitative microprobe analysis, powder X-ray diffraction, and high-temperature thermoelectric properties measurements. The thermoelectric properties of this compound are compared to the previously reported data for other related Chevrel phases. We report also the results of Rietveld analysis of powder X-ray diffraction data for Ti_0.3Mo₅RuSe₈. This compound adopts the rhombohedral Chevrel phase structure (space group , Z=3) with hexagonal lattice constants a=9.75430(25) Å and c=10.79064(40) Å. The low level of incorporation and low scattering power of Ti precluded the identification of the Ti positions, and Rietveld refinement was carried out only for the Mo₅RuSe₈ framework of Ti_0.3Mo₅RuSe₈ (R_p=10.5%, R_wp=14.6%). Rietveld analysis was also used to refine the structure of the unfilled phase Mo₅RuSe₈ (, Z=3, a=9.63994(8) Å, c=10.97191(11) Å, R_p=8.0%, R_wp=10.5%). Comparisons between the two structures are made.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

Trichloro- and methyldichlorogermyl monochelates and dibromo- and dichlorogermyl bischelates derived from N,N-disubstituted amides of 2-hydroxycarboxylic acids

The reactions of GeCl₄, GeBr₄, and MeGeCl₃ with O-trimethylsilyl derivatives of N,N-disubstituted amides of 2-hydroxycarboxylic acids afforded pentacoordinate and hexacoordinate neutral (O,O)-mono- and (O,O)-bischelates. The reactions of glycolic acid derivatives with GeX₄ produced bischelates X₂Ge[OCH₂C(O)NR²R³]₂ 7a,c,d (X = Cl, R² = R³ = Me (a), (CH₂)₅ (c), (CH₂CH₂)₂O (d)) and 8a (X = Br). By contrast, the reactions of lactic and mandelic acid derivatives with GeCl₄ and MeGeCl₃ gave monochelates Cl₃Ge[OCH(R¹)C(O)NR²R³] (S)-9a–c (R¹ = Me) and Cl₂MeGe[OCH(R¹)C(O)NR²R³] 10a (R¹ = H), (S)-11a,b (R¹ = Me), and (S)-12a (R¹ = Ph) (R²R³ = (CH₂)₄ (b)), respectively. According to the X-ray diffraction data, the Ge atom in bischelates 7c,d and 8a has a coordination number 6, and its coordination polyhedron can be described as a slightly distorted octahedron. In monochelates (S)-9a-c, 10a, (S)-11a,b, and (S)-12a, the Ge atom has a coordination number 5, and its coordination polyhedron can be described as a trigonal bipyramid with two halogen atoms or one halogen atom and one ethereal oxygen atom in equatorial positions and the halogen atom and the amide oxygen atom in the axial positions. The bonds in the axial positions are somewhat longer than the corresponding bonds in tetracoordinate Ge compounds.     

Practical and highly stereoselective method for the preparation of several chiral arylsulfinamides and arylsulfinates based on the spontaneous crystallization of diastereomerically pure N-benzyl-N-(1-phenylethyl)-arylsulfinamides

A novel and simple process for the preparation of enantiomerically pure (S_S)-benzenesulfinamide (S_S)-3a, (S_S)-p-toluenesulfinamide (S_S)-3b, (S_S)-p-chloro-benzenesulfinamide (S_S)-3c and (S_S)-p-fluorobenzenesulfinamide (S_S)-3d has been developed. The treatment of arylsulfinyl chlorides with (R)-N-benzyl-1-phenylethanamine in the presence of excess triethylamine gave diastereomeric mixtures of N-benzyl-N-(1-phenylethyl)-arylsulfinamides 1, which underwent spontaneous crystallization to furnish diastereomerically pure (R,S_S)-N-benzyl-N-(1-phenylethyl)-arylsulfinamides (R,S_S)-1a-1d in 28%, 29%, 27% and 31% yields, respectively. The diastereomerically pure compounds (R,S_S)-1 were then converted into four enantiopure (R_S)-methyl arylsulfinates (R_S)-2, and finally into four enantiopure (S_S)-arylsulfinamides (S_S)-3 in good yields.     

Crystal structures and spectroscopic properties of a new zinc phosphite cluster and an unexpected chainlike zinc phosphate obtained by hydrothermal reactions

A new zinc phosphite cluster, Zn₂(4,4′-dmbpy)₂(H₂PO₃)₄1, and a new chainlike zinc phosphate, Zn₂(5,5′-dmbpy)₂(HPO₄)(H₂PO₄)₂2, have been synthesized under hydrothermal conditions (4,4′-dmbpy=4,4′-dimethyl-2,2′-dipyridy, 5,5′-dmbpy=5,5′-dimethyl-2,2′-dipyridy). Compound 1 is a molecular zinc phosphite constructed from ZnO₃N₂ trigonal bipyramids, H₂PO₃ pseudo-pyramids and 4,4′-dmbpy ligands. Compound 2 possesses a 1D chainlike framework constructed from ZnO₃N₂ trigonal bipyramids, HPO₄ tetrahedra, H₂PO₄ tetrahedra and 5,5′-dmbpy ligands. Both compounds 1 and 2 exhibit intensive photoluminescence originated from the intraligand π-π* transitions. Crystal data: 1, monoclinic, P2₁/n, , , , β=110.857(3)°, , Z=2, R1=0.0297, wR₁=0.0801; 2, triclinic, P-1, , , , α=64.995(9)°, β=65.952(9)°, γ=65.296(8)°, , Z=2, R₁=0.0418, wR₁=0.1010.     

Mechanistic analysis and thermochemical kinetic simulation of the products from pyrolysis of poly(α-methylstyrene), especially the unrecognized role of phenyl shift

Mechanisms for pyrolysis of poly(α-methylstyrene) must rationalize high selectivity for monomer formation, negligible formation of volatile oligomers, and notably slow decrease in molecular weight compared with the rate of weight loss, i.e., unzipping dominates both back-biting and transfer. Backbone homolysis should form both a tert-benzylic radical R_tb and a prim radical R_p, with formation of the latter potentially supplemented in chain propagation steps emanating from the former. Hence product-forming pathways characteristic of each are expected to compete. Simulations of initial product distributions based on assigned rate constants for chain propagation steps indicate that R_tb is indeed predicted to efficiently unzip with minimal transfer or back-biting. However, R_p is predicted to give comparable amounts of transfer and back-biting with minimal unzipping, behavior inconsistent with experimental data. The proposed escape from this impasse is a previously unrecognized pathway, 1,2-phenyl shift in R_p to form a tert radical. If it undergoes β-scission, the net result is an inter-conversion of R_p to R_tb. Quantitative simulations suggest that this sequence is indeed highly competitive with other reactions of R_p and thus efficiently subverts the otherwise expected propagation of chains emanating from R_p.