Electron-stimulated sputtering of thin amorphous solid water films on Pt(111)

The electron-stimulated sputtering of thin amorphous solid water films deposited on Pt(111) is investigated. The sputtering appears to be dominated by two processes: (1) electron-stimulated desorption of water molecules and (2) electron-stimulated reactions leading to the production of molecular hydrogen and molecular oxygen. The electron-stimulated desorption of water increases monotonically with increasing film thickness. In contrast, the total sputtering--which includes all electron-stimulated reaction channels--is maximized for films of intermediate thickness. The sputtering yield versus thickness indicates that erosion of the film occurs due to reactions at both the water/vacuum interface and the Pt/water interface. Experiments with layered films of D2O and H2O demonstrate significant loss of hydrogen due to reactions at the Pt/water interface. The electron-stimulated sputtering is independent of temperature below approximately 80 K and increases rapidly at higher temperatures.     

Electron-stimulated production of molecular oxygen in amorphous solid water on Pt111: precursor transport through the hydrogen bonding network

The low-energy, electron-stimulated production of molecular oxygen from thin amorphous solid water (ASW) films adsorbed on Pt(111) is investigated. For ASW coverages less than approximately 60 ML, the O(2) electron-stimulated desorption (ESD) yield depends on coverage in a manner that is very similar to the H(2) ESD yield. In particular, both the O(2) and H(2) ESD yields have a pronounced maximum at approximately 20 ML due to reactions at the Pt/water interface. The O(2) yield is dose dependent and several precursors (OH, H(2)O(2), and HO(2)) are involved in the O(2) production. Layered films of H(2) (16)O and H(2) (18)O are used to profile the spatial distribution of the electron-stimulated reactions leading to oxygen within the water films. Independent of the ASW film thickness, the final reactions leading to O(2) occur at or near the ASW/vacuum interface. However, for ASW coverages less than approximately 40 ML, the results indicate that dissociation of water molecules at the ASW/Pt interface contributes to the O(2) production at the ASW/vacuum interface presumably via the generation of OH radicals near the Pt substrate. The OH (or possibly OH(-)) segregates to the vacuum interface where it contributes to the reactions at that interface. The electron-stimulated migration of precursors to the vacuum interface occurs via transport through the hydrogen bond network of the ASW without motion of the oxygen atoms. A simple kinetic model of the nonthermal reactions leading to O(2), which was previously used to account for reactions in thick ASW films, is modified to account for the electron-stimulated migration of precursors.     

Electron-stimulated production of molecular oxygen in amorphous solid water

The low-energy, electron-stimulated production of molecular oxygen from pure amorphous solid water (ASW) films and ASW films codosed with H(2)O(2) is investigated. Layered films of H(2)(16)O and H(2)(18)O are used to investigate the reaction mechanisms for O(2) production and the spatial profile of the reactions within the films. The O(2) yield is dose-dependent, indicating that precursors are involved in the O(2) production. For temperatures below approximately 80 K, the O(2) yield at steady state is relatively low and nearly independent of temperature. At higher temperatures, the yield increases rapidly. The O(2) yield is enhanced from H(2)O(2)-dosed water films, but the experiments show that H(2)O(2) is not the final precursor in the reactions leading to O(2). Instead, a stable precursor for O(2) is produced through a multistep reaction sequence probably involving the reactions of OH radicals to produce H(2)O(2) and then HO(2). The O(2) is produced in a nonthermal reaction from the HO(2). For relatively thick films, the reactions leading to O(2) occur at or near the ASW/vacuum interface. However, the electronic excitations that initiate the reactions occur over a larger range in the film. A kinetic model that qualitatively accounts for all of the observations is presented.     

Layer-by-layer growth of thin amorphous solid water films on Pt(111) and Pd(111)

The growth of amorphous solid water (ASW) films on Pt(111) is investigated using rare gas (e.g., Kr) physisorption. Temperature programmed desorption of Kr is sensitive to the structure of thin water films and can be used to assess the growth modes of these films. At all temperatures that are experimentally accessible (20-155 K), the first layer of water wets Pt(111). Over a wide temperature range (20-120 K), ASW films wet the substrate and grow approximately layer by layer for at least the first three layers. In contrast to the ASW films, crystalline ice films do not wet the water monolayer on Pt(111). Virtually identical results were obtained for ASW films on epitaxial Pd(111) films grown on Pt(111). The desorption rates of thin ASW and crystalline ice films suggest that the relative free energies of the films are responsible for the different growth modes. However, at low temperatures, surface relaxation or "transient mobility" is primarily responsible for the relative smoothness of the films. A simple model of the surface relaxation semiquantitatively accounts for the observations.     

Electron-stimulated reactions in thin D2O films on Pt(111) mediated by electron trapping

We have measured the electron-stimulated desorption (ESD) of D(2), O(2), and D(2)O, the electron-stimulated dissociation of D(2)O at the D(2)O/Pt interface, and the total electron-stimulated sputtering in thin D(2)O films adsorbed on Pt(111) as a function of the D(2)O coverage (i.e., film thickness). Qualitatively different behavior is observed above and below a threshold coverage of approximately 2 monolayers (ML). For coverages less than approximately 2 ML electron irradiation results in D(2)O ESD and some D(2) ESD, but no detectible reactions at the water/Pt interface and no O(2) ESD. For larger coverages, electron-stimulated reactions at the water/Pt interface occur, O(2) is produced and the total electron-stimulated sputtering of the film increases. An important step in the electron-stimulated reactions is the reaction between water ions (generated by the incident electrons) and electrons trapped in the water films to form dissociative neutral molecules. However, the electron trapping depends sensitively on the water coverage: For coverages less than approximately 2 ML, the electron trapping probability is low and the electrons trap preferentially at the water/vacuum interface. For larger coverages, the electron trapping increases and the electrons are trapped in the bulk of the film. We propose that the coverage dependence of the trapped electrons is responsible for the observed coverage dependence of the electron-stimulated reactions.     

Noncontact atomic force microscopy studies of ultrathin films of amorphous solid water deposited on Au(111)

Noncontact atomic force microscopy was used to study the morphological changes of an ultrathin amorphous solid water (ASW) film as a function of deposition temperature, annealing temperature, and annealing time. ASW deposited at 80 or 108 K on Au(111) formed truncated hemispherical clusters of increasing size during annealing at 134 K; these clusters were inferred to be crystalline. The number of nuclei present at the outer surface of the film after deposition was greater for higher deposition temperature. For lower cluster densities, depletion of the ASW film around the clusters was observed when the clusters became larger and dendritic growth was observed when the apparent cluster footprint radius exceeded 100 nm.     

The structure and crystallization of thin water films on Pt(111)

When water is adsorbed on Pt(111) above 135 K several different ice structures crystallize, depending on the thickness of the ice layer. At low coverage water forms extended islands of ice with a (square root(37) x square root(37))R25(o) unit cell, which compresses as the monolayer saturates to form a (square root(39) x square root(39))R16(o) structure. The square root(39) low-energy electron diffraction (LEED) pattern becomes more intense as the second layer grows, remaining bright for films up of 10-15 layers and then fading and disappearing for films more than ca. 40 layers thick. The ice multilayer consists of an ordered square root(39) wetting layer, on which ice grows as a crystalline film which progressively loses its registry to the wetting layer. Ice films more than ca. 50 layers thick develop a hexagonal LEED pattern, the entire film and wetting layer reorienting to form an incommensurate bulk ice. These changes are reflected in the vibrational spectra which show changes in line shape and intensity associated with the different ice structures. Thin amorphous solid water films crystallize to form the same phases observed during growth, implying that these structures are thermodynamically stable and not kinetic phases formed during growth. The change from a square root(39) registry to incommensurate bulk ice at ca. 50 layers is associated with a change in crystallization kinetics from nucleation at the Pt(111) interface in thin films to nucleation of incommensurate bulk ice in amorphous solid water films more than 50 layers thick.     

Spectroscopy of the conformational disorder in molecular films: tetracosane and squalane on Pt(111)

The spectroscopic investigation of the molecular vibrations of adsorbed branched and unbranched alkane molecules using helium atom scattering (HAS) provides evidence for the thermal formation of gauche defects in tetracosane (C24H50) monolayers above 200 K. HAS results for the vibration of tetracosane molecules perpendicular to the Pt(111) surface reveal a strong frequency decrease and peak broadening above the transition temperature which can be related to a reduction of the force holding the molecules to the surface. This reduction of the force is interpreted as being due to the thermal formation of gauche defects within the tetracosane molecules.     

Interaction of SO3 with c-ZrO2(111) films on Pt(111)

Single-crystalline sulfated c-ZrO2(111) films of the cubic (c) type have been prepared by reactive deposition of Zr onto Pt(111) in an O2 atmosphere and subsequent exposition to a SO3 atmosphere. The morphology, atomic structure, and composition have been examined by scanning tunneling microscopy, low-energy electron diffraction (LEED), Auger electron spectroscopy, and density functional theory (DFT) calculations. The clean c-ZrO2(111) films display a (2x2) surface structure. During SO3 exposure at room temperature, a clear (radical3xradical3)R30 degrees structure develops. At about 700 K, the SO3-induced (radical3xradical3)R30 degrees structure disappears and the bright (2x2) LEED pattern of the clean ZrO2 films reappears. The energies of plausible c-ZrO2(111)/SO3 structures have been examined by DFT. The (radical3xradical3)R30 degrees structure found in the experiments turned out to be the most stable one for temperatures below 700 K. At temperatures around 700 K, a disordered low coverage structure may exist, which can not be observed by conventional LEED. A comparison of cubic zirconia surfaces with the alternative tetragonal system yields similar results for the SO3 adsorption in the DFT calculations and shows that c-ZrO2 surfaces are good models for the industrial used tetragonal ZrO2 supports.     

Morphological change during crystallization of thin amorphous solid water films on Ru(0001)

The isothermal crystallization process of thin amorphous solid water (ASW) films on Ru(0001) has been investigated in real time by simultaneously employing helium atom scattering, infrared reflection absorption spectroscopy, and isothermal temperature-programmed desorption. The measurements reveal that the crystallization mechanism consists of random nucleation events in the bulk of the ASW films, followed by homogeneous growth. Morphological changes of the solid water film during crystallization expose the water monolayer just above the substrate to the vacuum during the crystallization process.     

Infrared spectroscopy of oxygen adsorbed on hydrogen covered Pt(111)

Using infrared reflection absorption spectroscopy we have investigated how preadsorbed hydrogen affects the adsorption of O(2) on the Pt(111) surface at temperatures below the onset of the water formation reaction. On the fully hydrogen covered surface, Theta(H)=1, O(2) physisorbs at temperatures below 45 K, the weakly dipole active internal stretch vibration is observed at 1548 cm(-1). Unlike on the clean Pt(111) surface, this adsorption state does not act as a precursor for O(2) chemisorption. The physisorbed molecules simply desorb above 45 K and no chemisorbed O(2) state is populated directly from the gas phase in the temperature range 45-90 K. When the surface is approximately half covered, Theta(H) approximately 0.4, with preadsorbed hydrogen, O(2) chemisorbs on the clean Pt(111) surface regions in the characteristic peroxolike and superoxolike states with vibration frequencies around 700 cm(-1) and 870 cm(-1). These values correspond to dense O(2) islands which develop already at low O(2) coverages. At this hydrogen coverage, we find that the initial sticking probability of chemisorbed O(2) is drastically reduced at 90 K and the general uptake also proceeds slowly when compared with observations for the clean surface. We suggest that this is due to a change in the behavior of the physisorbed O(2) precursor.     

Kinetic study of hydrogen sulfide decomposition on Pt(111) surface

In this work, kinetic of H₂S conversion to H₂ molecule on the surface of Pt(111) is studied using kinetic Monte Carlo simulation. The results of simulation were fitted to the experimental temperature-programed desorption spectra. The good agreement between the empirical and the simulated data confirms the proposed mechanism and kinetic data (activated energies and pre-exponential factors). The influence of variables such as temperature and concentrations of H₂S and H₂ on the overall results of hydrogen production is studied. The condition is proposed in which the best yield of reaction at minimum temperature is obtained. Results show that platinum is a perfect catalyst for converting H₂S to H₂ and it has a perfect performance (98%) after 5 μs at low temperature of 227°C.     

A photoemission study of Pd ultrathin films on Pt (111)

The origin of surface core-level shift (SCLS) of Pd thin films on Pt (111) substrate is investigated. At submonolayer coverage of Pd thin films, the splitting of Pd 3d core-level peaks indicate the contribution of both initial and final states of photoionization processes while no change on valence band (VB) spectra is found. When the coverage of Pd reaches to single monolayer, the final-state relaxation effect on the Pd 3d vanishes and only the initial-state effect, a negative SCLS, is present. Also, the VB spectrum at Pd monolayer films shows a clear band narrowing, that is, the origin of the negative SCLS at monolayer coverage. As the Pd coverage is increased to more than monolayer thickness, the Pd 3d peaks start to show the surface layer contribution from second and third layers and the VB spectra show even narrower bandwidth, possibly due to the formation of surface states and strained effect of Pd adlayers on top of the first pseudomorphic layer.     

Nuclear spin conversion of molecular hydrogen on amorphous solid water in the presence of O2 traces

Nuclear spin conversion (NSC) of ortho- to para-H(2) and para- to ortho-D(2) has been investigated on an amorphous solid water (ASW) surface at 10 K, in the presence of co-adsorbed O(2). The dynamics of the nuclear spin conversion could be revealed by combination of resonance enhanced multiphoton ionization spectroscopy (REMPI) with temperature programmed desorption (TPD) experiments. The conversion rates are consistent with a diffusion of molecular hydrogen inducing a nuclear spin conversion enhanced in the vicinity of molecular oxygen. The conversion times were found to increase with decreasing O(2) and H(2) coverage. Finally, on oxygen free ASW surface, the extremely long conversion characteristic times measured showed that such surface is not an efficient catalyst for NSC, in contradiction with hypothesis commonly made for interstellar medium.     

NO Chemisorption on Pt(111), Rh/Pt(111), and Pd/Pt(111)

The chemisorption of NO on clean Pt(111), Rh/Pt(111) alloy, and Pd/Pt(111) alloy surfaces has been studied by first principles density functional theory (DFT) computations. It was found that the surface compositions of the surface alloys have very different effects on the adsorption of NO on Rh/Pt(111) versus that on Pd/Pt(111). This is due to the different bond strength between the two metals in each alloy system. A complex d-band center weighting model developed by authors in a previous study for SO2 adsorption is demonstrated to be necessary for quantifying NO adsorption on Pd/Pt(111). A strong linear relationship between the weighted positions of the d states of the surfaces and the molecular NO adsorption energies shows the closer the weighted d-band center is shifted to the Fermi energy level, the stronger the adsorption of NO will be. The consequences of this study for the optimized design of three-way automotive catalysts, (TWC) are also discussed.     

Co-adsorption of water and hydrogen on Ni(111)

We have studied the surface coverage dependence of the co-adsorption of D and D(2)O on the Ni(111) surface under UHV conditions. We use detailed temperature-programmed desorption studies and high resolution electron energy loss spectroscopy to show how pre-covering the surface with various amounts of D affects adsorption and desorption of D(2)O. Our results show that the effects of co-adsorption are strongly dependent on D-coverage. In the deuterium pre-coverage range of 0-0.3 ML, adsorption of deuterium leaves a fraction of the available surface area bare for D(2)O adsorption, which shows no significant changes compared to adsorption on the bare surface. Our data indicate phase segregation of hydrogen and water into islands. At low post-coverages, D(2)O forms a two-phase system on the remaining bare surface that shows zero-order desorption kinetics. This two phase system likely consists of a 2-D solid phase of extended islands of hexamer rings and a 2-D water gas phase. Increasing the water post-dose leads at first to 'freezing' of the 2-D gas and is followed by formation of ordered, multilayered water islands in-between the deuterium islands. For deuterium pre-coverages between 0.3 and 0.5 ML, our data may be interpreted that the water hexamer ring structure, (D(2)O)(6), required for the formation of an ordered multilayer, does not form anymore. Instead, more disordered linear and branched chains of water molecules grow in-between the extended, hydrophobic deuterium islands. These deuterium islands have a D-atom density in agreement with a (2x2)-2D structure. The disordered water structures adsorbed in-between form nucleation sites for growth of 3-D water structures. Loss of regular lateral hydrogen bonding and weakened interaction with the substrate reduces the binding energy of water significantly in this regime and results in lowering of the desorption temperature. At deuterium pre-coverages greater than 0.5 ML, the saturated (2x2)-2D structure mixes with (1x1)-1D patches. The mixed structures are also hydrophobic. On such surfaces, submonolayer doses of water lead to formation of 3-D water structures well before wetting the entire hydrogen-covered surface.     

Ultrafast electron-induced desorption of water from nanometer amorphous solid water films

Laser-induced desorption of water molecules from nanometer amorphous solid water films supported on a single-crystal platinum substrate is reported. A femtosecond laser pulse creates hot substrate electrons, which are injected into the water layer, resulting in significant desorption at the water-vacuum interface. The dependence of the desorption yield on film thickness and results for isotopic spacer and capping layers reveal that the desorbing water originates from relatively deep down into the water layer, i.e., from several nanometers below the surface. This is proposed to be the result of cooperative electronic effects resulting from the high electron densities in the thin water film, which cause a transient destabilization of the water H-bonded network. Motion of excited water molecules through the layer is enabled by mixing within the layer on ultrafast timescales during the desorption process.     

Electron dynamics at polyacene/Au(111) interfaces

Two-photon photoemission (2PPE) spectroscopy is used to examine the excited electronic structure and dynamics at polyacene/Au(111) interfaces. Image resonances are observed in all cases (benzene, naphthalene, anthrathene, tetracene, and pentacene), as evidenced by the free-electron like dispersions in the surface plane and the dependences of these resonances on the adsorption of nonane overlayers. The binding energies and lifetimes of these resonances are similar for the five interfaces. Adsorption of nonane on top of these films pushes the electron density in the image resonance away from the metal surface, resulting in a decrease in the binding energy (-0.3 eV) and an increase in the lifetime (from <20 to approximately 110 fs). The insensitivity of the image resonances to the size of polyacene molecules and the absence of photoinduced electron transfer from the metal substrate to molecular states both suggest that the unoccupied molecular orbitals are not strongly coupled to the delocalized metal states or image potential resonances.     

Molecular dynamics of hydrogen dissociation on an oxygen covered Pt(111) surface

The dissociation of hydrogen on a Pt(111) surface covered with a p(2 x 2) oxygen phase was investigated using quasiclassical, six-dimensional molecular dynamics. The potential energy surface (PES) used in these simulations was obtained by an iterative novelty sampling algorithm. Compared to molecular beam experiments performed under similar conditions, the simulations give an accurate prediction of the reaction probability via a direct dissociation pathway. When compared to previously reported reaction probability curves for the clean Pt(111) surface, we find that the presence of an oxygen overlayer inhibits the direct pathway to hydrogen dissociation. This inhibition is a function of incident energy and cannot be described by a simple site blocking model. An indirect pathway to dissociation, which was observed in experiments, is not properly captured by the PES. Spatially resolved "reaction maps" indicate that the preferred site for hydrogen dissociation on an oxygen covered Pt surface is the top site of the Pt atom farthest from the adsorbed oxygen atom.