Solid-Liquid Equilibria in the Quaternary Systems KCl–MgCl<Subscript>2</Subscript>–SrCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O and NaCl–KCl–SrCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O at 348 K

Solid-liquid equilibria in the quaternary systems KCl–MgCl₂–SrCl₂–H₂O and NaCl–KCl–SrCl₂–H₂O at 348 K were measured by the isothermal solution saturation method. The composition of the equilibrium solid phase, solubilities of salts, and densities of saturated solution in the two systems were determined. Phase diagrams, water content diagrams and solution density diagrams of quaternary systems were plotted according to experimental data. The phase diagram of the quaternary system NaCl–KCl–SrCl₂–H₂O has one invariant point, three univariant curves as the boundary of NaCl, KCl and SrCl₂ · 2H₂O. This phase diagrams were simple co-saturation type without complex salt and solid solution. For the quaternary system KCl–MgCl₂–SrCl₂–H₂O, one complex salt KCl · MgCl₂ · 6H₂O (Car) had been found in this system, consisted of five univariant curves, two invariant points and four crystallization regions of MgCl₂ · 6H₂O (Bis), KCl, SrCl₂ · 2H₂O and KCl · MgCl₂ · 6H₂O. And the densities transformation rules were simply discussed. Simultaneously, the solubilities and densities data in invariant point of the quaternary system NaCl–KCl–SrCl₂–H₂O had been compared with the experimental data of previous researchers.     

Structure and thermal properties of the fritted glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–MgO–Na<Subscript>2</Subscript>O–K<Subscript>2</Subscript>O–ZnO system

In this work, the structure and thermal properties of aluminosilicate fritted glazes in SiO₂–Al₂O₃–CaO–MgO–Na₂O–K₂O–ZnO system with (4.0 mol%) and without addition of ZnO were examined by GIXRD, FTIR, MAS-NMR and thermal methods (DTA, DIL). It has been found that the all experimental glazes are amorphous material (transparent glazes). On the base of spectroscopic investigations, it was found that zinc ions exist in the network glazes in the octahedral coordination—Zn²⁺ ions play a network modifier role in structure of glazes. An analysis of the data obtained from thermal tests showed that addition of ZnO into chemical composition results in decrease in glass transition temperature value (T _g) for all glazes (DTA, DIL). The coefficient of thermal expansion (α) is decreased as the whole measurement range for one series of fritted glazes.     

Structural characterisation and thermo-physical properties of glasses in the Li<Subscript>2</Subscript>O–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–K<Subscript>2</Subscript>O system

This article aims to shed some light on the structure and thermo-physical properties of lithium disilicate glasses in the system Li₂O–SiO₂–Al₂O₃–K₂O. A glass with nominal composition 23Li₂O–77SiO₂ (mol%) (labelled as L₂₃S₇₇) and glasses containing Al₂O₃ and K₂O with SiO₂/Li₂O molar ratios (3.13–4.88) were produced by conventional melt-quenching technique in bulk and frit forms. The glass-ceramics (GCs) were obtained from nucleation and crystallisation of monolithic bulk glasses as well as via sintering and crystallisation of glass powder compacts. The structure of glasses as investigated by magic angle spinning-nuclear magnetic resonance (MAS-NMR) depict the role of Al₂O₃ as glass network former with four-fold coordination, i.e., Al(IV) species while silicon exists predominantly as a mixture of Q ³ and Q ⁴ (Si) structural units. The qualitative as well as quantitative crystalline phase evolution in glasses was followed by differential thermal analysis (DTA), X-ray diffraction (XRD) adjoined with Rietveld-reference intensity ratio (R.I.R.) method, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The possible correlation amongst structural features of glasses, phase composition and thermo-physical properties of GCs has been discussed.     

Thermoelectric power and electrochemical studies on CdI<Subscript>2</Subscript>–Ag<Subscript>2</Subscript>O–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

A quaternary super-ion-conducting system, 20CdI₂ − 80[xAg₂O − y(0.7V₂O₅ − 0.3B₂O₃)] where 1 ≤ x/y ≤ 3, has been prepared by melt quenching technique. The electrical conductivity measured was the order of 10⁻⁴  S/cm at room temperature. The values of silver-ion transport number obtained by electromotive force technique are nearly unity. The thermoelectric power and electrochemical studies were done on the CdI₂–Ag₂O–V₂O₅–B₂O₃ system. The discharge and polarization characteristics were examined for different cathodes to evaluate the utility of these cells as power sources for low energy applications.     

Transformations of CO<Subscript>2</Subscript> in Two-Phase Systems C<Subscript>8</Subscript>F<Subscript>18</Subscript>–H<Subscript>2</Subscript>O and C<Subscript>6</Subscript>F<Subscript>6</Subscript>–H<Subscript>2</Subscript>O

The transformation of carbon dioxide in aqueous emulsions of perfluorons in the presence of oxygen in the air results in the formation of a mixture of oxalic acid and a minor set of organic compounds C₄–C₈. The maximum CO₂ consumption occurs in the emulsion with the C₈F₁₈: H₂O vol/vol ratio of 1: 0.42 at pH 2.4; the H₂C₂O₄ yield is 11 mol %.     

Multicomponent systems LiCl–LiBr–Li<Subscript>2</Subscript>SO<Subscript>4</Subscript> and LiCl–LiBr–Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>–Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>

Phase equilibria in the LiCl–LiBr–Li₂SO₄ ternary system and the LiCl–LiBr–Li₂SO₄–Li₂MoO₄ quaternary system were studied by differential thermal analysis. The compositions and temperatures of minima in the ternary and quaternary systems were determined to be (31.2 mol % LiCl, 46.8 mol % LiBr, 22.0 mol % Li₂SO₄, 460°C) and (25.2 mol % LiCl, 30.2 mol % LiBr, 14.6 mol % Li₂SO₄, 30.0 mol % Li₂MoO₄, 411°C), respectively.     

Phase and extraction equilibria in H<Subscript>2</Subscript>O–sulfonol–HCl (H<Subscript>2</Subscript>SO<Subscript>4</Subscript>) and H<Subscript>2</Subscript>O–sodium dodecyl sulfate–HCl (H<Subscript>2</Subscript>SO<Subscript>4</Subscript>) systems

Solubility isotherms of water–sulfonol–hydrochloric (or sulfuric) acid and water–sodium dodecyl sulfate–hydrochloric acid systems at 75°C and a water–sodium dodecyl sulfate–sulfuric acid system at 50°C are constructed. Regions of two-phase liquid equilibrium suitable for use in extraction are found. Concentration parameters for extraction are determined. The interfacial distribution of a series of metal ions with and without such additional complexing reagents as diantipyrylmethane and diantipyrylheptane is studied.     

Ternary Systems LiBr–LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KBr–KVO<Subscript>3</Subscript>–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The binary system KVO₃–K₂CrO₄ and two ternary systems, LiBr–LiVO₃–Li₂CrO₄ and KBr–KVO₃–K₂CrO₄, were studied. In the ternary systems, the compositions and melting points of eutectic alloys were determined by differential thermal analysis: (49.0 mol % LiBr, 5.0 mol % LiVO₃, 46.0 mol % Li₂CrO₄, 400°C) and (17.0 mol % KBr, 78.0 mol % KVO₃, 5.0 mol % K₂CrO₄, 458°C), respectively.     

Thermal characterisation of raw aluminosilicate glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–K<Subscript>2</Subscript>O–Na<Subscript>2</Subscript>O–ZnO system with variable content of ZnO

Thermal properties of raw aluminosilicate ceramic glazes in the multicomponent system of SiO₂–Al₂O₃–CaO–K₂O–Na₂O–ZnO modified by ZnO addition were studied by differential thermal analysis (DTA), dilatometry (DIL), hot-stage microscopy (HSM), X-ray diffraction and fourier transform infrared spectroscopy (FTIR). Using the method of differential thermal analysis, the ways in which zinc oxides affect the temperature of transition (T _g), crystallisation (T _c) were determined. An analysis of the DTA data obtained during thermal tests showed that an increase in ZnO content results in decreasing the T _g value. Also, the influence of ZnO on characteristic temperatures and viscosity of glazes was checked. The introduction of zinc oxide (ZnO) into the glaze composition contributes to the decrease in viscosity of such glazes. An increasing ZnO content in the glazes also causes the reduction in softening (T _s), half-sphere (T _half-sphere) and fusion (T _fusion) temperatures. The mid-infrared spectroscopy showed that the thermal properties of glazes in SiO₂–Al₂O₃–CaO–K₂O–Na₂O–ZnO system modified by addition of ZnO can be associated with the depolymerising influence of zinc ions on the structure of the tested glazes.     

Ionic mobility and electrophysical properties of solid solutions in PbF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> and PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> systems

Ionic mobility and electrical conductivity of solid solutions with fluorite structure, obtained with solid-state approach in PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems, are studied by 19F NMR and electrochemical impedance spectroscopy methods. The 19F NMR spectra parameters, types of ion motions in the fluoride sublattice, and the ionic conductivity magnitude are shown to be determined by the temperature and fluoride concentration in the solid solutions. The solid solution specific conductivity in the PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems at 420–450 K is as high as ~10^–2 S/cm, which allows accounting the solid solutions as a base for preparation of functional materials.     

Phase formation in the system Zn(VO<Subscript>3</Subscript>)<Subscript>2</Subscript>–HCl–VOCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O

The phase and chemical compositions of precipitates formed in the system Zn(VO₃)₂–HCl–VOCl₂–H₂O at pH 1?3, molar ratio V⁴⁺: V⁵⁺ = 0.1?9, and 80°C were studied. It was shown that, within the range 0.4 ≤ V⁴⁺: V⁵⁺ ≤ 9, zinc vanadate with vanadium in a mixed oxidation state forms with the general formula Zn_xV⁴⁺ _yV⁵⁺ _2-yO₅ ? nH₂O (0.005 ≤ x ≤ 0.1, 0.05 ≤ y ≤ 0.3, n = 0.5?1.2). Vanadate Zn_xV₂O₅ ? nH₂O with the maximum tetravalent vanadium content (y = 0.30) was produced within the ratio range V⁴⁺: V⁵⁺ = 1.5?9.0. Investigation of the kinetics of the formation of Zn_xV₂O₅ ? nH₂O at pH 3 determined that tetravalent vanadium ions VO2+ activate the formation of zinc vanadate, and its precipitation is described by a second-order reaction. It was demonstrated that, under hydrothermal conditions at pH 3 and 180°C, zinc decavanadate in the presence of VOCl₂ can be used as a precursor for producing V₃O₇ ? H₂O nanorods 50–100 nm in diameter.     

Phase diagram of the NaCl–MgCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O system at 25–75°C and its application for MgCl<Subscript>2</Subscript> · 6H<Subscript>2</Subscript>O purification

The co-saturation line for the solid phases NaCl_(s) and MgCl₂ · 6H₂O_(s) in aqueous solution has been measured by a phase equilibrium at various temperatures. It was found that the Y _b (Y _b = w(NaCl)/(w(NaCl) + w(MgCl₂))) value of the co-saturation line increase with increasing temperature. A new recrystallization approach has been suggested for the purification of MgCl₂ · 6H₂O_(s) containing quite amount of impurity NaCl, i.e., dissolving the crude sample at low temperatures, followed by evaporating and phase separating at high temperatures. Applying the proposed approach a crude MgCl₂ · 6H₂O_(s) sample can be purified to the level of Y _b = 0.17% by only one crystallization process.     

Synthesis and X-ray diffraction study of Li(H<Subscript>3</Subscript>O)[UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)] · H<Subscript>2</Subscript>O

Single crystals of Li(H₃O)[UO₂(C₂O₄)₂(H₂O)] · H₂O (I) have been synthesized and studied by X-ray diffraction. Compound I crystallizes in the monoclinic crystal system with the unit cell parameters: a = 7.1682(10) Å, b = 29.639(6) Å, c = 6.6770(12) Å, β= 112.3(7)°, space group P 2₁/c, Z = 4, R = 4.36%. Structure I contains discrete mononuclear groups [UO₂(C₂O₄)₂(H₂O)]^2? ascribed to the crystal-chemical group AB ₂ ⁰¹ M¹ (A = UO₂ ²⁺, B⁰¹ =C₂O ₄ ^2? , M¹ = H₂O), which are “cross-linked” by the lithium ions into infinite layers {Li(UO₂)(C₂O₄)₂(H₂O)₂}^? perpendicular to [010]. The hydroxonium ions are located between adjacent uranium-containing layers. A hydrogen bond system involving water molecules, oxalate ions, and hydroxonium combines the anionic layers into a three-dimensional framework.     

Physicochemical Analysis of the System Zr(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>–Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>–H<Subscript>2</Subscript>SO<Subscript>4</Subscript>–H<Subscript>2</Subscript>O at 25°С

The solubility in the quaternary water–salt system Zr(SO₄)₂ · 4Н₂О–Na₂SO₄–H₂SO₄–H₂O at 25°C was studied. It was found that, in the system, there is crystallization of not only Na₂SO₄ and Zr(SO₄)₄ · 4H₂O, but also sodium sulfate zirconates Na₂Zr(SO₄)₂(OH)₂ · 0.3H₂O, Na₄Zr(SO₄)₄ · 3H₂O, and Na₂Zr(SO₄)₂ · 3H₂O and two new compounds, S₁ and S₂, which are presumably Na₂ZrO(SO₄)₂ · 2H₂O and Na₂Zr₂O₂(SO₄)₃ · 6H₂O.     

Synthesis of nanopowders and physicochemical properties of ceramic matrices of the LaPO<Subscript>4</Subscript>–YPO<Subscript>4</Subscript>–(H<Subscript>2</Subscript>O) and LaPO<Subscript>4</Subscript>–HoPO<Subscript>4</Subscript>–(H<Subscript>2</Subscript>O) systems

Sol-gel method was used to synthesize nanosize powders in the LaPO₄–YPO₄–(H₂O) and LaPO₄–HoPO₄–(H₂O) systems. Dense ceramic samples with high microhardness (up to 25 GPa) were formed from these powders by sintering at temperatures of up to 1600°C. The isomorphic capacity of the monoclinic LaPO₄ matrix for the second component (yttrium or holmium) simulating radioactive nuclides of the actinide-rare-earth fraction was found to be high. The composites are stable in aqueous solutions, which is indicated by the low concentration of lanthanum and yttrium ions during leaching test (~10^–7 g L^–1). The results obtained in the study can be used to develop new high-efficiency ceramic matrices for solidification of the actinide-rare-earth fraction of liquid wastes formed in processing of the spent nuclear fuel.     

Glass Formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>–(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>SO–H<Subscript>2</Subscript>O System

The glass formation in the Al₂(SO₄)₃–(CH₃)₂SO–H₂O system was found for the first time. The competitive ability of ligands, dimethyl sulfoxide and water (which are strong donors), for entering the first coordination sphere of aluminum is considered. The possibility of mixed coordination of (CH₃)₂SO (via sulfur and oxygen atoms) in the first coordination sphere of aluminum with retention of the glass-forming ability of the sample was suggested on the basis of IR spectral study.     

Synthesis and crystal structures of [K(H<Subscript>2</Subscript>O)(Piv)]<Subscript>∞</Subscript> and [K<Subscript>2</Subscript>(Phen)(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>(Piv)<Subscript>2</Subscript>]<Subscript>∞</Subscript>

A method for the synthesis of potassium pivalates (trimethylacetates) from potassium tert-butoxide and pivalic acid was proposed. The complexes of the formulas [K(H₂O)(Piv)]_∞(I) and [K₂(Phen)(H₂O)₂(Piv)₂]_∞ (II) (Piv denotes the pivalate anion and Phen denotes 1,10-phenanthroline) were obtained and characterized by elemental analysis and IR and ¹H NMR spectroscopy. The crystal structures of complexes I and II were determined using X-ray diffraction. Crystal structure I has a layered motif with two nonequivalent K atoms (C.N.s 5 + 2 and 6). The coordination of phenanthroline in II gives rise to a ribbon motif, the structure containing three nonequivalent K atoms (C.N.s 6, 6 + 1, and 8).     

Preparation and characterization of SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Na<Subscript>2</Subscript>O glass coated cBN abrasive particles via sol–gel route

SiO₂–Al₂O₃–Na₂O glass coated cubic boron nitride (cBN) abrasive particles were prepared by sol–gel technique. The results indicated that SiO₂–Al₂O₃–Na₂O glass was excellent material for oxidation protection of cBN abrasive grains because coefficient of thermal expansion of this glass closely matched that of cBN materials. The single particle compressive strength and impact toughness of this glass coated cBN abrasive particles were significantly increased. For the application of glass coated cBN abrasives to vitrified grinding wheels, it was evident that the glass coating provided high bonding strength between cBN abrasive grains and vitrified bond system.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.