Synthesis of complex sulfide phases BaSm<Subscript>2</Subscript>S<Subscript>4</Subscript>-Tm<Subscript>2</Subscript>S<Subscript>3</Subscript> and studies of their electrolytic properties

The possibility of synthesizing complex sulfide phases in the BaSm₂S₄-Tm₂S₃ system has been studied. Tm₂S₃ solid solutions were obtained with BaSm₂S₄ (CaFe₂O₄ structural type). The samples were identified by X-ray diffraction analysis and electron microscopy. The range of the solid solutions was determined. The total conductance was studied, and the conductance activation energy was calculated for samples with different dopant contents. The electrolytic properties of basic ternary sulfide and complex sulfide phases in the BaSm₂S₄-x mol % Tm₂S₃ system were investigated. A possible mechanism of defect formation was proposed.     

Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Electrochemical properties of solid electrolytes based on BaSm<Subscript>2</Subscript>S<Subscript>4</Subscript>

Solid solutions based on BaSm₂S_{4 ? x} mol % BaS (Sm₂S₃) are obtained. Oxide intermediates were homogenized using chemical and mechanical mixing methods. The solid solution region is determined. Complex conductivity is studied and conductivity activation energy is calculated for samples with different history. Electrolytic properties of phases based on barium thiosamarate are studied. Vacancy mechanism of defect formation is suggested.     

Synthesis of complex sulfide phases on the CaYb<Subscript>2</Subscript>S<Subscript>4</Subscript>-Y<Subscript>2</Subscript>S<Subscript>3</Subscript> quasibinary section and investigation of their structural and electrolytic properties

The possibility of synthesizing sulfide-conducting solid electrolytes in the CaYb₂S₄-Y₂S₃ quasibinary system is tested for the first time. The system is characterized by the X-ray diffraction analysis and the electron microscopy. The total conductivity of specimens is found by the conductometric method. The ionic and electronic transport numbers are determined based on the modified versions of the emf method and the Hebb-Wagner polarization method. The possible mechanism of defect formation is discussed.     

MnS-Pr<Subscript>2</Subscript>S<Subscript>3</Subscript> phase diagram

The MnS-Pr₂S₃ phase diagram is of the eutectic type with incomplete solubility based on the starting sulfides (MnS and Pr₂S₃). The extent of the MnS-based solid solution at 1470 K is 1 mol % Pr₂S₃. γ-Pr₂S₃ at 1470 K dissolves 23 mol % MnS, α-Pr₂S₃ at 1170 K dissolves 6 mol % MnS. The eutectic composition (30 mol % Pr₂S₃ at 1550 K) coincides with the value calculated from the Schroeder equation for the liquidus branch descending from MnS. A value of 64 kJ/mol was calculated for the heat of melting of Pr₂S₃ using the Schroeder equation.     

Growth and properties of MnIn<Subscript>2</Subscript>S<Subscript>4</Subscript> single crystals

Homogeneous MnIn₂S₄ single crystals ∼14 mm in diameter and ∼40 mm long were grown by directional solidification of melt. For these MnIn₂S₄ single crystals, the composition was determined by electron probe microanalysis, structure by X-ray diffraction, and melting temperature by differential thermal analysis. Transmission spectra were studied in these single crystals, in the region of the intrinsic absorption edge within 10–300 K. The transmission spectra were used to determine the bandgap width, and it was plotted as a function of temperature. The thermal expansion of MnIn₂S₄ single crystals was studied dilatometrically in the range 80–700 K, and the thermal expansion coefficient was determined.     

Phase diagrams of the systems Sc<Subscript>2</Subscript>S<Subscript>3</Subscript>-Ln<Subscript>2</Subscript>S<Subscript>3</Subscript> for Ln = La,Nd, or Gd

Phase diagrams have been designed for the systems Sc₂S₃-Ln₂S₃ where Ln = La, Nd, or Gd. In these systems, complex sulfides crystallize in orthorhombic space group Pnma. The sulfides melt congruently and have the following parameters; for LaScS₃, a = 0.718 nm, b = 0.654 nm, c = 0.960 nm, 2000 K, 3200 MPa; for NdScS₃, a = 0.712 nm, b = 0.646 nm, c = 0.952 nm, 1960 K, 3500 MPa; and for GdScS₃, a = 0.704 nm, b = 0.640 nm, c = 0.946 nm, 1900 K, 3400 MPa. The extents of the solid solutions based on the existing phases increase as the effective ion radii of Ln³⁺ approaches that of Sc³⁺. At 1670 K, the LnScS₃ homogeneity region is 48–52 mol % Nd₂S₃ and 46–54 mol % Gd₂S₃. Sc₂S₃ dissolves 3 mol % Nd₂S₃ and 6 mol % Gd₂S₃. γ-Nd₂S₃ dissolves 2 mol % Sc₂S₃, and γ-Gd₂S₃ dissolves 4 mol % Sc₂S₃. The subsystems Sc₂S₃-LnScS₃ and LnScS₃-Ln₂S₃ are of the eutectic type. The eutectic coordinates are, respectively, 27 mol % La₂S₃, 1880 K; 75 mol % La₂S₃, 1800 K; 30 mol % Nd₂S₃, 1850 K; 74 mol % Nd₂S₃, 1770 K; 33 mol % Gd₂S₃, 1800 K; and 74 mol % Gd₂S₃, 1730 K.     

The 3Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>-EuLaGa<Subscript>3</Subscript>S<Subscript>7</Subscript> system

The La₂S₃-Ga₂S₃-EuS system has been investigated along the 3Ga₂S₃-EuLaGa₃S₇ join by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis). is a quasi-binary eutectic-type section of the ternary system. Solubility on the base of both components has been revealed in the system. Solubility at room temperature is 3 mol % EuLaGa₃S₇ on the Ga₂S₃ side 1.5 mol % Ga₂S₃ and on the base of the EuLaGa₃S₇ compound. The coordinates of the eutectic point are 80 mol% EuLaGa₃S₇ and 1020 K.     

Phase equilibria in the BaS-Cu<Subscript>2</Subscript>S-Gd<Subscript>2</Subscript>S<Subscript>3</Subscript> system

Phase equilibria in the BaS-Cu₂S-Gd₂S₃ system have been studied along the 800 K isothermal section and the CuGdS₂-BaS, Cu₂S-BaGdCuS₃, BaGdCuS₃-Gd₂S₃, and BaGdCuS₃-BaGd₂S₄ polythermal sections. Complex sulfide BaGdCuS₃ is formed in the title system; it has an orthorhombic KZrCuSe₃-type structure (space group Cmcm) with the unit cell parameters equal to a = 0.40529(2) nm, b = 1.34831(6) nm, c = 1.02940(5) nm. This sulfide melts congruently at 1685 K. BaGdCuS₃ is in equilibrium with sulfides Cu₂S, BaS, Gd₂S₃, CuGdS₂, BaGd₂S₄, BaCu₄S₃, and BaCu₂S₂ and with compositions in the C₀ solid-solution region of the Cu₂S-Gd₂S₃ system. Eutectics are formed between compounds CuGdS₂ and BaGdCuS₃ at 7.0 mol % BaS and T = 1325 K, between BaGdCuS₃ and BaS at 64.0 mol % BaS and T = 1625 K, between Cu₂S and BaGdCuS₃ at 8.0 mol % BaGdCuS₃ and T = 1125 K, between Gd₂S₃ and BaGdCuS₃ at 64.0 mol % Gd₂S₃ and 1495 K, and between BaGdCuS₃ and BaGd₂S₄ at 35 mol % BaGd₂S₄ and T = 1660 K.     

Crystal structure of Tl<Subscript>5</Subscript>{[Nb<Subscript>2</Subscript>S<Subscript>4</Subscript>Br<Subscript>8</Subscript>]Br}

By the high-temperature reaction of Nb₂S₄Br₄ and TlBr a thallium salt of the anionic cluster complex [Nb₂S₄Br₈]^4? is obtained. Its crystal structure is determined by X-ray structural analysis. The complex is also characterized by Raman spectroscopy and electrospray-mass-spectrometry.     

Phase equilibria in the La<Subscript>2</Subscript>S<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>S<Subscript>3</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> ternary system

Phase equilibria in the La₂S₃-Bi₂S₃-La₂O₃ ternary system were studied by differential thermal, X-ray powder diffraction, and microstructure analyses. Phase diagrams of five vertical sections and a liquidus surface projection were plotted for the La₂S₃-Bi₂S₃-La₂O₃ system. The regions of primary crystallization of phases and coordinates of non- and monovariant equilibria were determined for the system.     

Sm<Subscript>2</Subscript>S<Subscript>3</Subscript>-Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

The Sm₂S₃-Sm₂O₃ phase diagram was studied by physicochemical methods of analysis from 800 K up to melting. Two oxysulfides are formed in the system: Sm₁₀S₁₄O with tetragonal crystal structure (space group I41/acd; unit cell parameters: a = 1.4860 nm, c = 1.9740 nm; microhardness: H = 4700 MPa; solid decomposition temperature: 1500 K) and Sm₂O₂S with hexagonal structure (space group P-3m1; a = 0.3893 nm, c = 0.6717 nm; H = 4500 MPa; congruent melting temperature: 2370 K). Within the extent of the Sm₂O₂S-based solid solution (61–70 mol % Sm₂O₃) at 1070 K, a singular point appears at the compound composition on property-composition curves. The eutectic coordinates: 23 mol % Sm₂O₃ and 1850 K; 80 mol % Sm₂O₃ and 2290 K.     

Electrochemical Methods for Studying Transport Properties and the Type of Ionic Conduction in Solid Electrolytes Based on CaPr<Subscript>2</Subscript>S<Subscript>4</Subscript> and Ca(Ba)Sm<Subscript>2</Subscript>S<Subscript>4</Subscript>

The theoretical feasibility of sulfide ion transport in phases based on MeLn₂S₄ (Me = Ca, Ba; Ln = Sm, Pr) is considered. Regions of solid solutions on the basis of ternary compounds are determined. A systematic investigation of phases is performed with the application of a variety of electrochemical methods, specifically, the conductimetry, emf in chemical concentration cells with and without transport, and Tubandt methods.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 707–713.Original Russian Text Copyright © 2005 by Ushakova, Kalinina, Fominykh, Yurlov, Murin.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Osmium thioselenochloride Os<Subscript>2</Subscript>S<Subscript>6</Subscript>Se<Subscript>2</Subscript>Cl<Subscript>8</Subscript>: Synthesis,cluster isolation,and structure

The quaternary thioselenochloride complex Os₂S₆Se₂Cl₈ (I) was obtained by a reaction of OsO₄ with a solution of Se in S₂Cl₂ at 100°C and identified by combination of X-ray diffraction (polycrystalline approach) and cluster framework isolation. A reaction of complex I with melted 4-cyanopyridine (4-CNPy) at 165°C gave the complex Os₂S₂Cl₄(4-CNPy)₄, which confirms the integrity of the binuclear cluster frame-work [Cl₂OsS₂OsCl₂] in complex I.     

Synthesis and Physicochemical Properties of a Lanthanum-Containing Analog of the Mineral Berthierite FeSb<Subscript>2</Subscript>S<Subscript>4</Subscript>

Phase equilibria in the FeSb₂S₄–FeLa₂S₄ system were studied by physicochemical analysis methods (differential thermal, X-ray powder diffraction, and microstructural analyses and microhardness and density measurements), and the phase diagram of the system was constructed. The formation of quaternary sulfide FeLaSbS₄ melting congruently at 1230 K, an analog of the mineral berthierite FeSb₂S₄, was detected. The X-ray powder diffraction analysis showed that FeLaSbS₄ belongs to the berthierite structural type and crystallizes in the orthorhombic system with the unit cell parameters a = 11.424 Å, b = 14.160 Å, c = 3.782 Å, Z = 4, and space group Pbam.     

Crystallographic analysis of sulfides related to bismuthinite Bi<Subscript>2</Subscript>S<Subscript>3</Subscript>

The crystallographic analysis of Bi₂S₃, CuPbBi₅S₉, CuPbBi₃S₆, and CuPbBiS₃ compounds, representing a series with a successive replacement of a part of Bi atoms by Pb+Cu, shows that they are characterized by a stable combination of a pseudotetragonal cation framework with a pseudohexagonal anion one, which is common for all structures, within orthorhombic unit cells with n sizes of 11.2 Å, 4 Å, and 11.5 Å. The Bi₂S₃ cation framework is retained for the heavy Bi+Pb, and additional light Cu fill the available vacant sites without changing its geometry but varying the crystallographic symmetry within the orthorhombic crystal symmetry and unit cells of n standard blocks (11.2×4×11.5 ų).     

Mechanism of photoinduced nanodimensional expansion/contraction in glassy thin layers of As<Subscript>2</Subscript>S<Subscript>3</Subscript>

The mechanism of photoinduced expansion/contraction in glassy As₂S₃ has a photochemical nature. Photostructural transformation is connected with rearrangement of As₄S₄ molecules and similar non-stoichiometric compounds, As₄S_4+x. These molecules are believed to exist in clusters which correspond to the second glass-forming region of As–S systems, including the As₅₆S₄₄ eutectic. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 1, pp. 59–63, January–February, 2009.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

First heteroleptic Mo<Subscript>3</Subscript>S<Subscript>7</Subscript> clusters containing non-innocent phenanthroline ligands

Reaction of the thiobromide [Mo₃S₇Br₆]²⁻ cluster anion with 5,6-dimethyl-1,10-phenanthroline (Me₂Phen) in solution leads to the substitution of two bromide ligands and the subsequent formation of a new mixed-ligand neutral complex [Mo₃S₇Br₄(Me₂Phen)] (I). Reaction of [Mo₃S₇Br₆]²⁻ with 5,6-dimethyl-1,10-phenanthroline in CH₂Cl₂ followed by treatment of I with Na(Dtc) · 3H₂O (Dtc = diethyldithiocarbamate) results in the new mixed-ligand cluster complex [Mo₃S₇(Dtc)₂(Me₂Phen)]²⁺ (IIa). Slow evaporation of the CHCl₃ solution of the complex in the presence of PF₆⁻ gives crystals of {[Mo₃S₇(Dtc)₂(Me₂Phen)]Br}PF₆ · 3CHCl₃ (II) characterized by X-ray structural analysis. Close contacts S...S result in the formation of cationic dimers {[Mo₃S₇(Dtc)₂(Me₂Phen)]₂}⁴⁺ which form infinite chains through additional S_ax...Br contacts. All compounds were characterized by IR, elemental analysis and ESI-MS. Synthesized complexes represent the first examples of heteroleptic Mo₃S₇ clusters containing phenanthroline ligands.     

Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> nanocomposite layers synthesized using the layer-by-layer technique

Possibility of layer-by-layer synthesis by colloidal layering of Sb₂S₃-SiO₂ nanocomposite layers from colloid solutions of {[H _x Sb₂S₅] ^m ?}mNa⁺ and SiO₂ was studied. The composition of the layers synthesized was examined by Raman spectroscopy, transmission spectroscopy in the UV and visible spectral ranges, energy-dispersion micro analysis, and scanning electron microscopy.