Electrochemical study of glassy carbon electrodes modified with zirconium phosphate and some azine-type redox dyes

Glassy carbon (GC) electrodes were modified with a layer of zirconium phosphate (ZrP), using either direct chemical synthesis onto the surface or a ZrP gel droplet evaporation procedure. The azine-type dyes nile blue A (NB) and toluidine blue O (TB) were immobilized onto the ZrP-modified GC electrodes either by adsorption onto just the formed layer of ZrP or by inclusion into the ZrP matrix during its chemical synthesis. The electrochemical behavior of the GC·ZrP·dye composite electrodes was studied. For GC·ZrP-modified electrodes prepared by chemical synthesis on the surface, coverage by NB or TB of one or a few monolayers was found, with E _m values for these redox couples slightly shifting by ca. 0.05 V to the negative direction. For the GC·ZrP electrodes prepared by gel droplet evaporation, the E _m values for NB and TB appear initially shifted by ca. 0.2 V to the positive direction; however, both cathodic and anodic peaks return to their usual positions on the potential scale during soaking these electrodes in a buffer solution. Electronic Publication     

Electrocatalysis of redox reactions by metal nanoparticles on graphite electrodes

A selection of graphitic materials of both scientific as well as commercial importance has been modified by deposition of various metals at very low coverages under overpotential or underpotential conditions. Nanoparticles were found with some metals. The changes in the electrocatalytic activity of the supporting electrode by the metal modification were studied using electrochemical impedance measurements of a fast redox system. The carbon/solution interface was characterized with surface Raman spectroscopy, electrochemical impedance measurements, and cyclic voltammetry. Electronic Publication     

Evaluation of performance and stability of biocatalytic redox films constructed with different copper oxygenases and osmium-based redox polymers

We are interested in investigating the applications of biocatalytic mediated reduction of oxygen by oxygenases in films on electrode surfaces, as such reactions can form the basis for biosensors or biocatalytic fuel cell development. Here we present approaches aimed at improving the stability and signal output of such films. These include selection of oxygen reducing biocatalysts which are active under physiological conditions and development of redox mediators which offer the opportunity to tailor the mediator to each enzyme. It was found that for each enzyme Melanocarpus albomyces laccase (MaL), Trametes hirsutus laccase (ThL) or bilirubin oxidase (MvBOD) it was the biocatalytic films mediated by Os(2,2′-bipyridine)₂Cl·PVI that not only generated the highest current densities compared to Os(4,4′-dimethyl-2,2′-bipyridine)₂Cl·PVI and Os(4,4′-dichloro-2,2′-bipyridine)₂Cl·PVI, but also proved to be the most stable over 48 h. Under physiological conditions electrodes constructed from MvBOD generated the highest initial current densities for each of the osmium redox polymers, however these films proved to be the least stable over 48 h. Stability could be improved using surface pre-treatment.     

Redox reaction characteristics of ferritin-immobilized onto poly(l-lysine)-modified indium oxide electrodes

Ferritin-immobilized poly(l-lysine)-modified electrodes showed well-defined redox waves representing ferritin. Cathodic and anodic peak currents obtained from cyclic voltammograms were proportional to potential sweep rates. From charge flow values during oxidation or reduction reactions calculated by peak areas in cyclic voltammograms, and the surface coverage of ferritin, reacted iron atoms per ferritin molecule were calculated. Obtained numbers of reacted iron atoms were significantly smaller than expected values from iron atoms at ferrihydrite core surfaces of ferritin, which would be caused by the rate-determining ion flow through ion channels of ferritin to compensate for charges in the ferritin cavity. Anodic and cathodic peak potentials in cyclic voltammograms were significantly dependent on cationic species in the solution, though voltammetric shapes and peak currents were independent of cations. From the obtained results that structural changes in ferritin were not detected by fluorescent spectra, it is thought that the cationic dependence on ferritin redox peak potentials is caused by ferritin cores.     

Determination of nitrite using sensors based on nickel phthalocyanine polymer modified electrodes

An amperometric nitrite sensor based on a polymeric nikel tetraaminothphalocyanine (p-NiTAPc) film coated glassy carbon (GC) electrode was developed. The mechanism of catalysis on the surface of the electrode was discussed. The sensor exhibited fast respond towards nitrite with a detection limit of 1×10⁻⁷ M and a linear concentration range of 5×10⁻⁷ to 8×10⁻³ M. The possible interference from several common ions was tested. The proposed method was successfully applied in the detection of nitrite in real samples.     

Organoclay-enzyme film electrodes

This paper aims at showing the interest of organoclays (clay minerals containing organic groups covalently attached to the inorganic particles) as suitable host matrices likely to immobilize enzymes onto electrode surfaces for biosensing applications. The organoclays used in this work were natural Cameroonian smectites grafted with either aminopropyl (AP) or trimethylpropylammonium (TMPA) groups. The first ones were exploited for their ability to anchor biomolecules by covalent bonding while the second category exhibited favorable electrostatic interactions with negatively charged enzymes due to ion exchange properties that were pointed out here by means of multisweep cyclic voltammetry. AP-clay materials were applied to the immobilization of glucose oxidase (GOD) and TMPA-clays for polyphenol oxidase (PPO) anchoring. When deposited onto the surface of platinum or glassy carbon electrodes as enzyme/organoclay films, these systems were evaluated as biosensing electrochemical devices for detection of glucose and catechol chosen as model analytes. The advantageous features of these organoclays were discussed by comparison to the performance of related film electrodes made of non-functionalized clays. It appeared that organoclays provide a favorable environment to enzymes activity, as highlighted from the biosensors characteristics and determination of Michaelis-Menten constants.     

Electron-transfer reduction of selected alcohols with alkalide K, K(15-crown-5)2 via organometallic intermediates

The course of the reaction of alkalide K⁻, K⁺(15-crown-5)₂1 with selected alcohols depends on the kind of alcohol and the mode of substrate delivery. In the case of methanol, potassium methoxide formed initially undergoes destruction at the excess of 1. It results in potassium oxide and methylpotassium. The latter opens the crown ether ring giving potassium tetraethylene glycoxide vinyl ether and methane. A similar course of the process is observed for propanol. Potassium glycidoxide is the main product formed in the reaction of 1 with glycidol. Its oxirane ring is opened at the excess of 1. Organopotassium alkoxides, i.e., potassium potassiomethoxide and dipotassium potassiopropane-1,2-dioxide are intermediate products of this reaction. They react then with the crown ether. Potassium methoxide, potassium enolate of acetaldehyde, dipotassium propane-1,2-dioxide and potassium tetraethylene glycoxide vinyl ether are the final products of this process.     

血红素蛋白质-琼脂糖膜修饰电极的表征和电催化特性

利用琼脂糖(agarose)水凝胶将肌红蛋白(Mb)、血红蛋白(Hb)、辣根过氧化物酶(HRP)和过氧化氢酶(Cat)4种血红素蛋白质固定在裂解石墨电极表面,形成稳定的血红素蛋白质-agarose膜修饰电极.用紫外-可见和红外光谱及原子力显微法对血红素蛋白质-琼脂糖膜修饰电极进行了表征.紫外-可见和红外光谱显示,在琼脂糖凝胶中,血红素蛋白质保持原始构象.溶液的pH(3.0～10.0)可逆地改变血红素蛋白质的构象,从而影响其光谱性质.原子力显微图象表明血红素蛋白质与agarose水凝胶之间存在较强的作用.研究了血红素蛋白质催化还原O2、H2O2的机理.稳定的血红素蛋白质-agarose修饰电极能运用于H2O2的定量测定.     

壳聚糖修饰电极上的铁氰根离子对抗坏血酸的电催化氧化作用

在玻碳电极表面滴涂一层壳聚糖膜 ,壳聚糖分子中 -NH2 在酸性溶液中发生质子化 ,靠静电引力作用吸附富集荷负电的电子介体Fe(CN) 63 -,使其固定在电极表面 ,研究了此Fe(CN) 63 - 壳聚糖 GC修饰电极对抗坏血酸的催化氧化作用。抗坏血酸的浓度在 3.0× 1 0 -6～ 5 .0× 1 0 -3 mol L范围内呈很好的线性关系 ,相关系数为 0 .998,检测限达 1 .0× 1 0 -6mol L。该法已用于测定蔬菜中抗坏血酸的含量。     

Electroanalytical Exploitation of Nitroso Phenyl Modified Carbon‐Thiol Interactions: Application to the Low Voltage Determination of Thiols

The electrochemical generation of nitrosophenyl groups covalently attached to graphite powder (nitrosophenylcarbon) from carbon powder chemically modified with nitrophenyl groups and their subsequent reaction with thiols (glutathione, cysteine and homocysteine) has been investigated as a method by which the later can be quantified. The modified carbon powder was immobilized onto a basal plane pyrolytic graphite electrode and characterized by cyclic voltammetry by scanning between 1.0 V and ?1.0 V vs. SCE in phosphate buffer (pH 7). Square wave voltammetry (SWV) was used for the determination of thiols and the SWV parameters were optimized. The nitrosophenylcarbon is electrogenerated from nitrophenylcarbon and can chemically oxidize thiols to disulfides. Subsequent reduction of nitrosophenylcarbon to phenylhydroxylaminecarbon during the square wave voltammetric process leads to a decrease in the reductive current. This can be correlated to the concentration of thiol present within the medium. The cyclic voltammetric responses of basal plane pyrolytic graphite electrode, edge plane pyrolytic graphite electrode, glassy carbon electrode and boron‐doped diamond electrode in the direct oxidation of thiols were also investigated and all were found to have a significantly higher overpotential compared to the described method using nitrosophenylcarbon.     

复合聚合物修饰的粉末微电极及其对亚硝酸根还原的催化

本论文简述用Nafion_Os(bpy) 3 2 + /PVP复合膜修饰的乙炔黑粉末微电极 ,以亚硝酸根还原为模型反应 ,实现从复合修饰及扩大电极比表面两方面改善电极性能的思路 .结果表明 ,它同时显示Nafion_Os(bpy) 3 2 + /PVP修饰电极对NO2 -及NO+ 双重富集并再生活性粒子NO+ 、防止中继体流失、加速膜中中继体传输、改变反应途径等复合修饰电极的多种功能以及粉末微电极的高比表面、高液相传质速度以及薄层效应的特性 .与平面修饰电极及裸粉末微电极相比 ,它明显提高了酸性溶液中亚硝酸根还原的可逆性、呈数量级地提高稳态极限电流密度以及NO2 -的检测指标 .     

Reactions of solute species at an electrode modified with titanocene functionalized polypyrrole film: ferrocene and titanocene dichloride

We have studied for the first time the ability of a conducting polymer film, p(Tc3Py), representing a polypyrrole matrix with covalently attached titanocene dichloride (TcCl₂) centers, to serve as an intermediator for the electron charge transport between the electrode and the reaction sites of solute reactants. The standard potential of the first of these electroactive species, ferrocene (Fc), is in the range where the polymer matrix is in its slightly oxidized state so that solute Fc species give a reversible response at the surface of this modified electrode. Another solute reactant, TcCl₂, was studied in solutions in which it demonstrates a (quasi)reversible behavior at bare electrode surfaces, THF+TBAPF₆ and AN+TEACl. The standard redox potential of this species belongs to the range of the electroactivity of immobilized TcCl₂ centers (where the matrix is in its non-conducting state) so that the electron charge has to be transported via stepwise redox reactions between neighboring centers inside the film. The combination, solute reactant+film, results in a greater CV current compared to the response of the film in background solution or of the solute species at the bare electrode surface. This current for THF solution even exceeds the sum of separate currents for the film and the reactant. This finding is attributed to a catalytic effect of solute species as redox intermediators for the transformation of immobilized electroactive centers leading to a greater degree of the film reduction. The presence of solute TcCl₂ species results in a much greater stability of immobilized centers (compared to the corresponding reactant-free solution), both in the course of CV with the passage of the range of their response and in experiments with the film holding at the potential within this range. This holding leads to an almost constant current related to the reaction of solute species at the film/solution interface. Our estimate shows that immobilized centers undergo above 10,000 reversible transformations (without an observed tendency to the degradation) to ensure the passage of this current. The conclusion has been drawn that immobilized TcCl₂ centers are able to serve as sufficiently stable redox intermediators for the electron charge transport across the film, a prerequisite for the catalytic applications of such films.Abbreviations AN acetonitrile - THF tetrahydrofuran - Cp cyclopentadienyl, C₅H₅ - Cp cyclopentadienyl radical, C₅H₄ - Fc ferrocene, Cp₂Fe - TcCl₂ titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂ or its radical CpCpTiCl₂ - PPy polypyrrole - Tc3Py titanocene-propyl-pyrrole, Cl₂TiCpCp(CH₂)₃NC₄H₄ - p(Tc3Py) polymer obtained from Tc3Py - TBAPF₆ tetrabuthylammonium hexafluorophosphate - TEACl tetraethylammonium chlorideDedicated to Zbigniew Galus on the occasion of his 70th birthday.     

Construction of Protein Probe with a His-tag and an Electron-transfer Peptide for a Target Protein Sensing

A protein probe with an electron-transfer peptide and a His-tag was designed to electrochemically sense a target protein. We selected tyrosine-rich (Y₄C) and tryptophan-rich (W₄C) peptides for use as electron-transfer agents. The peak for oxidation was based on the oxidations of the phenolic hydroxy groups in Y₄C and on the indole rings in W₄C. Asialofetuin (ASF) with galactose residues was the protein probe, and a galactose recognition protein, soybean agglutinin (SBA), was the target protein. A protein probe composed of an amino acid and carbohydrate residue was expected to be biocompatible. When voltammetric measurements were performed using a glassy carbon electrode, the oxidation peaks of H₆Y₄C and ASF-H₆Y₄C appeared at the same potential. The peak current of ASF-H₆Y₄C was 4-fold that of H₆Y₄C because of the stronger adsorption of ASF-H₆Y₄C onto the electrode. The electrode response of ASF-H₆Y₄C with SBA was half that of ASF-H₆Y₄C alone. By contrast, the peak current of ASF-Y₄CH₆ was higher than that of ASF-H₆Y₄C, which was the result of a greater degree of contact between the Y₄C moieties and an electrode. On the other hand, the voltammetric behaviors of ASF with W₄C and a His-tag were similar to those with Y₄C and a His-tag. The sensitivity of SBA using ASF-Y₄CH₆ was at the 10⁻¹³ M level. To confirm the function of the sensing system, measurements were performed in human serum with SBA and ASF-Y₄CH₆. When SBA was added, the serum had a concentration that ranged between 5.0×10⁻¹³ and 4.0×10⁻¹² M, and the amount of SBA that could be recovered ranged from 97 to 101%. Consequently, this system could be applied to the detection of SBA in serum.     

Voltammetric Sensing of Soybean Agglutinin Using an Electrode Modified with Electron-transfer,Carbohydrate-mimetic/Cross-linker-peptide-collagen Film

We constructed an electrochemical sensor based on an electrode modified with electron-transfer, carbohydrate-mimetic peptides on collagen film. The peptide consisted of Ac-Y₄C combined with soybean agglutinin (SBA). To evaluate the binding between SBA and the peptide, we prepared Ac-Y₄CA_n (3-6) containing oligoalanine as a cross-linker. When SBA and Y₄C on the electrode were incubated, the peak was decreased by the SBA uptake of the peptide. The change in the peak current using Ac-Y₄CA₆ was the greatest of the four peptides. The calibration curve was linear and ranged from 4.0×10⁻¹⁴ to 1.2×10⁻¹² M with a detection limit of 1.3×10⁻¹⁴ M.     

Studies on differential sensing of dopamine at the surface of chemically sensitized ormosil-modified electrodes

We report herein the preparation of few chemically sensitized organically modified sol–gel glass (ormosil) films and sensing of dopamine at the surface of the modified electrodes derived from these films. The chemical sensitization in ormosil-modified electrodes is introduced by incorporating: (a) potassium ferricyanide and (b) either Nafion, or dibenzo-18-crown-6 or in situ generated Prussian blue from potassium ferricyanide. Electrochemical sensing of dopamine on the surfaces of these modified electrodes have been investigated and found that: (i) the presence of dibenzo-18-crown-6 facilitate the magnitude of dopamine sensing, (ii) conversion of potassium ferricyanide into Prussian blue also enhances the magnitude of dopamine sensing as compared to that of control and Nafion sensitized modified electrodes, (iii) both dibenzo-18-crown-6 and Nafion sensitized ormosil-modified electrodes are found selective to dopamine in the presence of ascorbic acid present under physiological concentration range. These finding again directed our attention to investigate the sensing of dopamine: (a) on dibenzo-18-crown-6 incorporated within Prussian blue sensitized modified electrode and (b) in the presence of varying concentrations of dibenzo-18-crown-6 in the Prussian blue modified electrodes. The investigations made on these lines again suggested the following: (1) increase in dibenzo-18-crown-6 concentrations in the modified electrode increases the magnitude of dopamine sensing upto an optimum concentration of macrocycle; (2) the detection limit of dopamine sensing goes down to 30 nM as compared to that of dibenzo-18-crown-6 incorporated with potassium ferricyanide which was found to the order of 100 nM. Investigations of the interference of ascorbic acid revealed that the presence of dibenzo-18-crown-6 introduces selectivity in dopamine sensing in the presence such common interfering analyte like ascorbic acid.     

抗坏血酸在普鲁士蓝修饰的丝网印刷电极上的电催化氧化

制备了普鲁士蓝修饰的丝网印刷电极,研究了该修饰电极对抗坏血酸的催化氧化作用。在pH5.0的0.2mol/L磷酸盐缓冲溶液中,修饰电极对抗坏血酸显示出快速的电化学响应,较高的稳定性、重现性和催化活性,测定的线性范围为5.0×10-6～8.0×10-3mol/L,相关系数为0.998,检出限为3.0×10-6mol/L(3σ)。已对实际样品进行了测定。     

Evaluation of redox mediators for amperometric biosensors: Ru-complex modified carbon-paste/enzyme electrodes

The properties of reagentless amperometric biosensors are mainly governed by the interaction of the used redox enzyme and the redox mediators used to facilitate the electron-transfer reaction. Both the used redox mediators and the redox enzymes differ concerning their hydrophilicity and their properties within the matrix of a carbon-paste electrode. Since there is no general procedure which is applicable for any enzyme in combination with any redox mediator, optimisation is necessary for each possible combination. Three approaches for the development of biosensors were investigated using carbon-paste electrodes enriched with redox mediator as a base in all sensor architectures. A class of redox mediators with the common formula Ru(LL)(2)(X)(2) (where LL are 1,10-phenantroline or 2,2'-bipyridine type ligands, and X is an acido ligand) was investigated. In the first approach, enzymes were integrated into the carbon paste; in the second, the enzymes were adsorbed on the surface of the mediator-containing carbon-paste electrode and held in place by a Nafion film; and in the third approach, enzymes were entrapped in polymer films, which were electrochemically deposited onto the electrode's surface. The properties of the obtained biosensors strongly depend on the sensor architecture and the specific features of the used enzyme. Thus, our investigation using three different sensor architectures can provide valuable information about the possible interaction between a specific enzyme and a redox mediators with specific properties.     

Electrocatalytic oxidation of NADH at carbon paste electrodes modified with meldola blue adsorbed on zirconium phosphate: effect of Ca2+ and polyethyleneimine

The basic electrochemistry of carbon paste electrodes modified with Meldola Blue adsorbed on zirconium phosphate (MB-ZP-CPEs) and their ability to oxidize NADH have been investigated. Three types of carbon powder (graphite and glassy carbon-type Sigradur K and G) were used to obtain MB-ZP-CPEs. On comparing cyclic voltammograms recorded at MB-ZP-CPEs, similarly prepared from the three different carbon powders, those made with Sigradur K exhibited the lowest background current, and the best MB electrochemistry, seen as the highest peak intensities and smallest peak separation. Using MB-ZP-CPEs based on Sigradur K a study on NADH oxidation was done focusing on the effect of the Ca²⁺ concentration in the contacting solution and on the addition of polyethyleneimine (PEI) into the paste. It can be stated that MB-ZP-CPEs based on Sigradur K and containing 1.23% (w/w) PEI exhibited the best behavior for NADH oxidation, measured by the highest electrocatalytic rate constant (8.2×10³ M^–1 s^–1).     

Silver nanoparticle assemblies supported on glassy-carbon electrodes for the electro-analytical detection of hydrogen peroxide

Electrochemical detection of hydrogen peroxide using an edge-plane pyrolytic-graphite electrode (EPPG), a glassy carbon (GC) electrode, and a silver nanoparticle-modified GC electrode is reported. It is shown, in phosphate buffer (0.05 mol L^–1, pH 7.4), that hydrogen peroxide cannot be detected directly on either the EPPG or GC electrodes. However, reduction can be facilitated by modification of the glassy-carbon surface with nanosized silver assemblies. The optimum conditions for modification of the GC electrode with silver nanoparticles were found to be deposition for 1 min at –0.5 V vs. Ag from 5 mmol L^–1 AgNO₃/0.1 mol L^–1 TBAP/MeCN, followed by stripping for 2 min at +0.5 V vs. Ag in the same solution. A wave, due to the reduction of hydrogen peroxide on the silver nanoparticles is observed at –0.68 V vs. SCE. The limit of detection for this modified nanosilver electrode was 2.0×10^–6 mol L^–1 for hydrogen peroxide in phosphate buffer (0.05 mol L^–1, pH 7.4) with a sensitivity which is five times higher than that observed at a silver macro-electrode. Also observed is a shoulder on the voltammetric wave corresponding to the reduction of oxygen, which is produced by silver-catalysed chemical decomposition of hydrogen peroxide to water and oxygen then oxygen reduction at the surface of the glassy-carbon electrode.     

Self-assembled monolayers on electrode surfaces: a probe for redox kinetics

The formation and characterization of self-assembled monolayers of organosulfur compounds like alkanethiols and dialkyl (di)sulfides on metal surfaces such as gold are areas of current research interest. The presence of an aromatic ring in a thiol molecule can enhance the binding between Au and the thiol, resulting in the formation of compact and impervious self-assembled monolayers. The formation of a monolayer of 2-mercaptobenzothiazole (MBT), containing an aromatic group with a fused thiazole ring but no long alkyl chain, is achieved on a gold electrode surface. Voltammetric investigations of ferro/ferricyanide and ferrous/ferric redox systems carried out on this Au|MBT electrode are reported. Further, the possibility of using such an Au|MBT electrode to distinguish between inner and outer sphere electron transfer reactions is indicated. Received: 2 January 1998 / Accepted: 14 May 1998