半导体激光放大器的电路模型及噪声特性分析

给出了半导体激光（ＬＤ）放大器的电路模型，使得对半导体激光放大器的特性可以用通用电路分析软件进行分析。用该模型对谐振型光放大器光功率输出特性与失谐关系进行了模拟分析，模型的分析结果与已报道的理论和实验基本一致；用该模型还对谐振光放大器的噪声进行了分析。     

A model for noise processes in semiconductor laser amplifiers, part 1: the travelling-wave semiconductor laser amplifier

A new model for the noise processes in a travelling-wave semiconductor laser amplifier is presented. This model is based on applying perturbation techniques to the basic travelling-wave rate equations to deduce the noise rate equations. These equations are then used to calculate the power spectral densities of the intensity, electron density and phase noises introduced into a single signal mode propagating through the amplifier. The model can be applied to any gain profile within the amplifier, ranging from unsaturated to completely saturated. Furthermore, in contrast to most other semiconductor laser amplifier models, this model does not require the homogenization of the photon field over the length of the device.     

Model for noise processes in semiconductor laser amplifiers:

A model for the noise processes in a Fabry-Perot semiconductor laser amplifier is presented. This model is based on the application of perturbation techniques to the travelling-wave rate equations for the amplifier. The model includes the effects of end-facet reflections and the backwards-travelling wave into the amplifier. The noise power spectral densities for the intensity, electron density and phase noise are derived. The model can be applied to an arbitrary gain profile and does not require homogenization of the photon field over the length of the device.     

阶跃掺杂Er∶Al2O3光波导放大器增益特性数值模拟

构建了纵向阶跃非均匀掺杂的掺铒Al2O3光波导放大器理论模型,利用有限元法、速率方程和传输方程,数值模拟了放大器的净增益特性.计算结果表明：阶跃掺杂掺铒Al2O3光波导放大器提高了抽运效率,净增益和信号光输出功率比优化后的均匀掺杂光波导放大器分别提高了9.2%和90.5%,长度却缩短了16.9%.     

On the validity of the independent hot-spot model

The results of the independent hot-spot (IHS) model are compared to those of the underlying stochastic amplifier in the regime where the coupling of the amplifier is close to its critical value. The considered case is that of a 1D linear amplifier with at most one hot spot per interaction length. It is shown that the validity of the critical coupling given by the IHS model depends on the correlation function of the pump field and should be discussed in each particular case. The discrepancy between the IHS model and the underlying amplifier is shown to be due to the random fluctuations of the hot-spot field around its dominant, deterministic, component.     

Numerical analysis of stimulated inelastic scatterings in ytterbium-doped double-clad fiber amplifier with multi-ns-duration and multi-hundred-kW peak-power output

We investigate the stimulated Brillouin scattering (SBS) and the stimulated Raman scattering (SRS) in an ytterbium-doped double-clad fiber amplifier that outputs optical pulses with multi-ns-duration and multi-hundred-kW peak-power. The ytterbium-doped double-clad fiber amplifier is simulated by a model which is composed of a set of propagation-rate equations. The simulated results show that SBS and SRS will deform the output signal pulse in both the time domain and the spectral domain, and degrade the performance of the ytterbium-doped double-clad fiber amplifier seriously. It is shown in our simulation that the troublesome SBS can be effectively suppressed by broadening the signal linewidth to a critical value of 0.07 nm in our calculation, and the effect of SRS can be suppressed using a large-mode-area fiber with proper length. The model and the simulated results are very useful for designing an ultra-high-power ytterbium-doped double-clad fiber amplifier.     

Design of broadband hybrid fiber amplifier based on particle swarm optimization algorithm北大核心CSCD

基于铒/镱共掺光纤放大器（erbium-ytterbium doped fiber amplifier, EYDFA）的理论模型和受激拉曼散射效应的分析理论,利用EYDFA和拉曼光纤放大器（Raman fiber amplifier, RFA）的增益谱互补特性,研究并设计了EYDFA与二阶多泵浦RFA相结合的混合放大器结构。为了得到高增益和低平坦度的混合放大器,引入了粒子群算法优化泵浦光波长和功率。仿真结果表明:在不使用增益均衡器的条件下,所设计的混合光纤放大器在输出端得到了近似相等的输出光功率,在90 nm的带宽范围内平均增益为38.78 dB,增益平坦度为1.1 dB,为混合放大器的设计和优化提供了参考。     

The influence of nonfundamental pump modes in erbium-doped fiber amplifiers

This work analyzes how the characteristics of an erbium-doped fiber amplifier (EDFA) depends on the mode distribution of 800-nm pump light. The analysis is performed by using a large-signal model of an optimally pumped erbium-doped fiber amplifier. Special attention is given to the gain degradation, and noise figures of the amplifier for co- and counterpropagating pump light.     

阶跃掺杂Er∶Al_2O_3光波导放大器增益特性数值模拟

构建了纵向阶跃非均匀掺杂的掺铒Al2O3光波导放大器理论模型,利用有限元法、速率方程和传输方程,数值模拟了放大器的净增益特性·计算结果表明阶跃掺杂掺铒Al2O3光波导放大器提高了抽运效率,净增益和信号光输出功率比优化后的均匀掺杂光波导放大器分别提高了9.2%和90.5%,长度却缩短了16.9%.     

增益竞争双波长放大单频光纤放大器理论研究

引入增益竞争是抑制单频光纤放大器中受激布里渊散射(SBS)的有效方式. 在单频光纤放大器的基础上, 推导了描述增益竞争双波长放大单频掺镱双包层光纤放大器的稳态速率方程组, 建立了增益竞争双波长放大单频光纤放大器的理论模型; 利用建立的理论模型模拟分析了信号光波长间隔、 信号光种子功率比、 抽运方式和增益光纤长度等因素对放大器的单频激光输出 效率以及SBS抑制效果的影响.     

Decoherence caused by transient linear amplifiers

Decoherence of nonclassical properties is studied for a photon system interacting with a transient environment which changes from a linear attenuator to amplifier during the time evolution. The sufficient condition for quadrature squeezing, sub-Poissonian photon statistics and entanglement to be completely destructed during the time-evolution is derived. The results are compared with those obtained for another model of the transient linear amplifier. Furthermore the decoherence caused by a environment which switches a linear amplifier to attenuator is also investigated.     

A technique for simulating the amplifier-to-eardrum transfer function of an in situ hearing aid

There are numerous articles wherein mathematical models of various parts of an in situ hearing aid have been reported. Such parts include, for example, the microphone, receiver, cylindrical tubes carrying sound to the eardrum and out through the earmold vent, and the external path from the vent back to the microphone. This article extends these earlier works to include the hearing-aid amplifier. In particular, a mathematical technique for characterizing the amplifier in combination with the receiver is reported. Cascade parameters of a two-port model of one particular amplifier/receiver combination are obtained by this method. The cascade-parameter data and the method of obtaining this data are verified by two different experimental procedures. One procedure involves both computing and measuring the input driving-point impedance of the amplifier/receiver combination. In the second procedure, the amplifier-to-eardrum transfer function of a hearing aid incorporating this same amplifier/receiver combination and mounted on an artificial ear is both computed and measured. Experimental and computed values of this transfer function for three different earmold geometries are in reasonably close agreement. The amplifier/receiver model reported herein will be used in future studies of acoustic feedback in hearing aids.     

Twin-core erbium-doped fiber amplifier with channel equalization

A twin-core erbium-doped fiber amplifier has been studied. We establish the theoretical model, propose the coupled-propagation equations, and then numerically simulate the characteristics of the amplifier. It is found that twin-core erbium-doped fiber amplifier can provide different gains for signals with different input powers and self-heal the extra channel loss between amplifying stages, thus equalizes the output signal level. The twin-core erbium-doped fiber amplifier is very suitable for the future wavelength-division-multiplexed and optical frequency-division-multiplexed fiber networks.     

CiADS固态功率源的可用性设计与分析

ADS加速器面临的一大技术挑战是高可用性要求,进行固态功率源可用性设计是为ADS加速器的可用性设计与分析做准备。首先对CiADS的可用性要求进行了分配,固态功率源的分配结果为0.999;然后对固态功率源进行了初步可用性设计,分析的结果无法满足要求;最后对固态功率源进行了冗余设计,使用Reliasoft软件建立了固态功率源的可靠性框图,分析结果显示:满足一定的维修条件下,当其他元件的平均故障间隔时间（MTBF）达到171 702 h,25/28冗余设计可以满足0.999的可用性要求。One of the challenging technologies of ADS is the high availability requirement. The availability design of the solid-state amplifier is the preparation for ADS. Firstly the availability requirement of CiADS is proposed as 0.8. The distribution result of the solid-state amplifier is 0.999 according to this requirement. Then the availability result shows the preliminary design of solid-state amplifiers can not reach the availability requirement. At last the power loss is considered to build the k/N redundancy model of the main amplifier and the mean time between failure (MTBF) is calculated for various redundancy models. The reliability block diagram of the solid-state amplifier is set up by Reliasoft and the simulation results show that the 25/28 redundancy model can meet the requirement 0.999 when MTBF of other components reaches 171 702 hours with the certain maintenance.     

双芯光纤放大器的研究

研究了双芯光纤放大器的均衡性,建立了理论模型并对其进行数值模拟,结果表明双芯光纤放大器能为多路不同波长,不同输入功率的信号提供不同的增益,从而在一定程度上实现了输出功率均衡,非常短途于多级放大的光频分复用系统和网络。     

锥形脊结构半导体光放大器的有限元分析

为提高半导体光放大器与单模光纤耦合效率，建立了半导体放大器的锥形脊结构模型。在该模型下利用有限元数值模拟方法分析，计算了波导区折射率、锥尖宽度、条形波导尺寸、渐变折射率波导层对锥形脊结构模式扩展的影响。通过完善锥形脊结构参量的设计，获得了锥形脊结构半导体光放大器与单模光纤95％的耦合效率。     

A KIND OF NEW AMPLIFIER

Chaotic characteristics in the iteration of logistic map(one-dimensional discrete dynamic system) are simulated and analyzed. The circuit implementation of a kind of chaotic amplifier model is based on the chaotic characteristics that chaos is sensitively dependent on its initial conditions, and the circuit simulation result is given using simulation program with integrated circuit emphasis for personal computer (PSPICE), and is compared with linear amplifier. Advantages and disadvantages of such a model are indicated.     

An integrated circuit subsystem of quantum dot semiconductor optical amplifier coupled with electro-absorption modulator and its application in wavelength conversion

A multi-section circuit model of quantum dot semiconductor optical amplifier is proposed by employing the standard rate equations. Using this model, gain spectra, saturation property, and occupation probability of quantum dot semiconductor optical amplifier are analyzed by PSPICE simulation. An integrated circuit subsystem of quantum dot semiconductor optical amplifier cascaded with electro-absorption modulator is also derived to investigate the patterning effect reduction in wavelength conversion.     

非理想情况下前馈功放性能分析及优化

为有效指导前馈超线性功率放大器的工程调试与优化,分析了元器件非理想情况下前馈功放的线性化性能及优化指标。首先,通过简化的环路模型,在不考虑误差功放畸变的条件下,推导了线性度与支路幅度、相位失配及延迟失配的理论数值关系,并分析了延迟失配对线性化带宽及抑制比的影响;接着,在考虑误差功放畸变的基础上定义了有效对消比,详细分析了系统三阶交调畸变的极限对消能力。最后,基于设计的前馈线性功放进行了优化分析。实验结果表明,设计的功放线性度改善了36.23 dB。     

Characteristics of the bandwidth in gain-clamped erbium-doped fiber amplifiers

1.IntYoductionErbium-dopedfiberamplifiers(EDFAs)arepresentlyofgreatinterestinopticalfibercommunicationsystem.Thegainprofiles,thatis,thegainforallwavelengthsofinter-est,areveryimPortantproPertiesofEDFAsinthewavelength-division-multip1exing(WDM)fibersystems['j.Manynumericalandanalyticalmethods(seeforexampleL1jandreferencestherein)canbeusedtoinvestigatethegainprofile8ofEDFAs,buttheyneedcumbersomemeasurementS(forexampIesPectraImeasurementsofEr-dopingabsorWtionandemission,andsoon)andhence…