Flexible electrospun PET/TiO2 nanofibrous structures: Morphology,thermal and mechanical properties

In this study, a solvothermal method was used to synthesize anatase titanium dioxide (TiO₂) nanoparticles in the presence of oleic acid (OA) and oleylamine (OM) as morphology‐directing agents. Functional nanocomposite fibers of poly(ethylene terephtalate) (PET) containing surfactants‐capped TiO₂ nanoparticles were developed by electrospinning technique. The morphology, thermal stability and mechanical properties of PET/TiO₂ nanocomposite mats were investigated as a function of TiO₂ concentration. Morphology investigation showed interesting results in terms of the level of TiO₂ dispersion inside the fibers and the improvement of the quality (smoothness) of the fibers' surface when the synthesized nanorhombic TiO₂ nanoparticles were used compared to a commercial P25 TiO₂ (AEROXIDE P25)_. The presence of OA and OM on the surface of the nanorhombic synthesized TiO₂ led to a significant improvement of TiO₂ dispersion inside the PET matrix. Furthermore, the physical interaction between the PET matrix and TiO₂ nanoparticles resulted in an enhanced thermal stability, and an increase of the Young's modulus and tensile strength for TiO₂ concentration up to 10 wt%.     

Synthesis and characterization of ternary nanocomposites of TiO2/rGO/CdS as an efficient catalyst for photo-degradation of methyl orange

Novel ternary composite photocatalysts have been successfully prepared by TiO₂ nanofibers, reduced graphene oxide, and CdS nanoparticles (TiO₂/rGO/CdS) by using electrospinning technique with easy chemical methods. The structures and their properties are examined by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and field-emission scanning electron microscope (FESEM). The structural characterization of the composite reveals that pure TiO₂ NFs and CdS NPs crystalline very well and the reduced graphene oxide is tightly composed with TiO₂ NFs and CdS Nps. The photodegradation of methyl orange (MO) under UV light illumination is significantly enhanced compared with that of bare materials. This ternary composite degrades methyl orange within 75 min. The enhanced photocatalytic degradation performance resulted from effective separation of e–h pairs with rGO sheets and also contributed for high rate degradation efficiency. This novel ternary composite has a potential application of wastewater purification and utilization for energy conversions.     

树叶为模版制备网状TiO2和Fex/TiO2及光催化活性研究

以梧桐树叶为模板制备了具有网状结构的TiO2和Fex/TiO2光催化材料.通过扫描电镜(SEM)、X-射线衍射(XRD)、X-射线光电子能谱(XPS)、荧光发射光谱(PL)、紫外-可见吸收光谱(UV-Vis)等对这两类光催化材料的结构和物理性能进行了表征.结果表明,以树叶为模板制得的Fe0.005/TiO2呈网状结构.在600～800℃范围内,随煅烧温度的升高,网状TiO2和Fe0.005/TiO2中锐钛型TiO2的含量减少,Fe3+的掺杂能促进锐钛型向金红石型的转变.与Degussa P25相比,网状TiO2和Fex/TiO2的荧光光谱强度明显减弱,光生电子-空穴对的复合情况得到改善;吸收光谱范围明显红移,禁带宽度有不同程度的缩小.孔雀石绿的光催化降解实验表明,网状TiO2和Fex/TiO2具有比Degussa P25更强的催化活性.光催化活性的稳定性研究表明,网状Fe0.005/TiO2具有良好的稳定性,能多次重复使用.     

Electrospun TiO2 nanofibers coated with polydopamine for enhanced sunlight-driven photocatalytic degradation of cationic dyes

Controlled polydopamine (PDA)-coated TiO₂ composite nanofibers (NFs) were successfully fabricated via a facile electrospinning process and exposing TiO₂ NFs into a slightly alkaline dopamine solution. Chemical composition, structural morphology, and photocatalytic degradation property of as-prepared TiO₂ NFs and PDA-coated TiO₂ composite NFs were characterized by Fourier transfer infrared, X-ray photoelectron spectra, transmission electron microscopy, UV-vis diffuse reflectance spectra, and photocatalytic degradation experiments. The results indicated that the core-shell TiO₂@PDA composite NFs were successfully prepared and the thickness of PDA shell was highly controlled within several nanometers. And obtained TiO₂@PDA composite NFs exhibited improved photocatalytic performance after PDA coating, which is attributed to the photosensitization of PDA shell. Moreover, with increased pH values of initial solution, both absorption capacity in the dark and photocatalytic performance of TiO₂@PDA composite NFs showed significant improvement. Additionally, the obtained composite NFs showed different degrees of enhancement in photocatalytic performance based on different dyes, which is related to the “bait” effect of PDA shell. Comparing with anionic dyes, TiO₂@PDA composite NFs tended to adsorb and degrade more cationic dye molecules. It is anticipated that the fabricated composite NFs with controlled core-shell structure have great potential to be applied for organic pollutants removal, especially cationic dyes.     

Synthesis and characterization of conductive polyaniline/TiO2 composite nanofibers

Fibrillar conductive polyaniline/TiO₂ (PANI/TiO₂) nanocomposites with different TiO₂ amount were synthesized with a template-free in situ polymerization method and characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and conductivity measurement. The morphology determination shows that the PANI/TiO₂ composite nanofibers are relatively uniform with the diameter and length in the range of 20–40 nm and 390–420 nm respectively. It also shows that the TiO₂ of the composite is rutile crystalline and PANI has some degree of crystallinity. The IR measurement indicates that there is a strong interaction between the PANI and TiO₂ nanoparticles, and it has a beneficial effect on the thermal stability of the composite nanofiber. The conductivity of PANI/TiO₂ composites changes with TiO₂ amount and reaches an optimum value of 2.86 S/cm at 11.1 wt% TiO₂. Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(4): 67–70 (in Chinese)     

TiO2/nanoclinoptilolite as an efficient nanocatalyst in the synthesis of substituted 2‐aminothiophenes

TiO₂/nanoclinoptilolite (TiO₂/NCP) was prepared by the mediation of hexadecyltrimethylammonium (HDTMA) as surfactant and used as an effective heterogeneous nanocatalyst for the preparation of substituted 2‐aminotiophenes. The modified HDTMA/NCP was impregnated with titanium(IV) chloride solution followed by calcination at 500 °C for 20 h. The obtained nanocomposite was characterized using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, inductively coupled plasma optical emission spectroscopy and X‐ray diffraction. Moreover, the prepared nanocomposite had high stability and recoverability under mild and solvent‐free conditions.     

Electrospinning preparation of NiO/ZnO composite nanofibers for photodegradation of binary mixture of rhodamine B and methylene blue in aqueous solution: Central composite optimization

One‐dimensional nanofiber of p‐type NiO/n‐type ZnO heterojunctions with various molar ratios of Ni to Zn at different calcination temperatures were successfully synthesized using the electrospinning method, and they were fully characterized. The photocatalysts thus obtained were applied in aqueous solutions for rhodamine B (RDB) and methylene blue (MB) degradation. The p–n heterojunctions built among the cubic structure NiO and hexagonal structure ZnO in the composite nanofiber are responsible for generation of electrons and holes and subsequently superoxide and hydroxyl radical production by carriers which lead to degradation of the dyes in solution. The composite nanofibers (ZnNi1) calcined at 550 °C for 3 h showed the highest photocatalytic activity for degradation of the dyes in aqueous solution. The optimum values were found to be 180 min, 7.0, 1 g l^?1 and 3.0 and 3.0 mg l^?1 for irradiation time, pH, photocatalyst dosage and initial concentration of RDB and MB, respectively. For these optimum conditions, the photocatalytic degradation of RDB and MB was found to be 99.37 and 98.44%, respectively. The maximum photodegradation of RDB and MB using ZnNi1 was 59.41 and 65.43%, respectively. First‐order kinetics based on the Langmuir–Hinshelwood model successfully fitted the experimental data.     

Facile Electrospinning of CeO2/Bi2WO6 Heterostructured Nanofibers with Excellent Visible‐light‐driven Photocatalytic Performance

One‐dimensional (1D) CeO₂/Bi₂WO₆ heterostructured nanofibers with a diameter of about 300 nm were successfully synthesized by using a straightforward strategy combining an electrospinning technique with a sintering process. The acquired products were characterized by thermogravimetric and differential scanning calorimetric (TG‐DSC), Fourier transform infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area measurements, and UV/Vis spectroscopy. The obtained CeO₂/Bi₂WO₆ heterostructured nanofibers exhibited an excellent photocatalytic property for the degradation of Rhodamine B (RhB) dye driven by visible light due to the promoted separation of photoelectrons and holes and the large contact area between the photocatalyst and organic pollutant.     

Solvent‐free synthesis of propargylamines catalyzed by an efficient recyclable ZnO‐supported CuO/Al2O3 nanocatalyst

An efficient nanocatalyst of ZnO‐supported CuO/Al₂O₃ (CuO/ZnO/Al₂O₃ nanocatalyst) was prepared by the co‐precipitation method and characterized by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray powder diffraction and Brunauer–Emmett–Teller surface area analysis. CuO/ZnO/Al₂O₃ nanocatalyst proved to be a very efficient catalyst on the synthesis of propargylamines under solvent‐free conditions in high yields. Moreover, the catalyst can be recyclable without reducing catalytic activity up to five times.     

Fabrication of electrospun polyethersulfone/titanium dioxide (PES/TiO2) composite nanofibers membrane and its application for photocatalytic degradation of phenol in aqueous solution

The main objective of this research is to use the photocatalytic properties of PES/TiO₂ nanofibers membranes to remove the phenol as a toxic pollutant in various effluents. The uniform fibers in terms of minimum bead formation and fibers diameter were fabricated. Therefore, more TiO₂ catalysts are on the surface of the fibers which increase the active surface area of nanoparticles and consequently improve the phenol degradation efficiency. The effects of TiO₂ concentration on hydrophilicity, mechanical properties, porosity, mean pore size, and water flux of membranes were studied. The PES/TiO₂ nanofibers were evaluated for phenol degradation under UVA irradiation through a transparent membrane module. The amount of removable phenol was analyzed with high‐performance liquid chromatography. Central composite design was used as a statistical experimental design. Finally, the effect of TiO₂ content in nanofibers and initial phenol concentrations were investigated as well as pH values in synthetic wastewater, on phenol degradation. The results from analysis of variance (ANOVA) analysis indicated that TiO₂ content in nanofibers was the most important and effective parameter on phenol degradation. It was also presented that there is no significant interaction between parameters so that the effect of each parameter was investigated separately. Maximum phenol degradation was 43.0 ± 0.3% and found under conditions of TiO₂ content, initial phenol concentration, and pH value of 8%, 120 ppm, and 7, respectively.     

CeO2/TiO2复合纳米纤维的制备及光催化性能研究

采用静电纺丝技术和水热合成法制备了CeO₂/TiO₂复合纳米纤维. 利用X射线衍射(XRD)、拉曼光谱(Raman)、扫描电镜(SEM)、透射电镜(TEM)和比表面积测定(BET)等分析测试手段对样品的形貌及结构进行了表征, 并以罗丹明B的脱色降解为模式反应, 考察了样品的光催化性能. 结果表明: CeO₂纳米粒子均匀地生长在TiO₂纳米纤维表面, 形成了异质结构的CeO₂/TiO₂复合纳米纤维光催化材料. 通过改变碱源, 可以得到不同形貌的CeO₂. CeO₂的存在增加了TiO₂纳米纤维的比表面积, 有效地实现TiO₂光生电子和空穴的分离, 增强了体系的量子效率, 与纯TiO₂纳米纤维相比光催化活性明显提高. 初步探讨了异质结的形成机理.     

Synthesis of polyethylene‐octene elastomer/SiO2‐TiO2 nanocomposites via in situ polymerization: Properties and characterization of the hybrid

In this study, a silicic acid and tetra isopropyl ortho titanate ceramic precursor and a metallocene polyethylene‐octene elastomer (POE) or acrylic acid grafted metallocene polyethylene‐octene elastomer (POE‐g‐AA) were used in the preparation of hybrids (POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂) using an in situ sol‐gel process, with a view to identifying a hybrid with improved thermal and mechanical properties. Hybrids were characterized using Fourier transform infrared spectroscopy, ²⁹Si solid‐state nuclear magnetic resonance (NMR), X‐ray diffraction, differential scanning calorimetry, thermogravimetry analysis, dynamic mechanical thermal analysis, and Instron mechanical testing. Properties of the POE‐g‐AA/SiO₂? TiO₂ hybrid were superior to those of the POE/SiO₂? TiO₂ hybrid. This was because the carboxylic acid groups of acrylic acid acted as coordination sites for the silica‐titania phase to allow the formation of stronger chemical bonds. ²⁹Si solid‐state NMR showed that Si atoms coordinated around SiO₄ units were predominantly Q₃ and Q₄. The 10 wt % SiO₂? TiO₂ hybrids gave the maximum values of tensile strength and glass transition temperature in both POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂. It is proposed that above this wt %, excess SiO₂? TiO₂ particles caused separation between the organic and inorganic phases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1690–1701, 2005     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Coaxial Carbon/MnO2 Hollow Nanofibers as Sulfur Hosts for High‐Performance Lithium‐Sulfur Batteries

Lithium‐sulfur (Li‐S) batteries have recently attracted a large amount of attention as promising candidates for next‐generation high‐power energy storage devices because of their high theoretical capacity and energy density. However, the shuttle effect of polysulfides and poor conductivity of sulfur are still vital issues that constrain their specific capacity and cyclic stability. Here, we design coaxial MnO₂‐graphitic carbon hollow nanofibers as sulfur hosts for high‐performance lithium‐sulfur batteries. The hollow C/MnO₂ coaxial nanofibers are synthesized via electrospinning and carbonization of the carbon nanofibers (CNFs), followed by an in situ redox reaction to grow MnO₂ nanosheets on the surface of CNFs. The inner graphitic carbon layer not only maintains intimate contact with sulfur and outer MnO₂ shell to significantly increase the overall electrical conductivity but also acts as a protective layer to prevent dissolution of polysulfides. The outer MnO₂ nanosheets restrain the shuttle effect greatly through chemisorption and redox reaction. Therefore, the robust S@C/MnO₂ nanofiber cathode delivers an extraordinary rate capability and excellent cycling stability with a capacity decay rate of 0.044 and 0.051 % per cycle after 1000 cycles at 1.0 C and 2.0 C, respectively. Our present work brings forward a new facile and efficient strategy for the functionalization of inorganic metal oxide on graphitic carbons as sulfur hosts for high performance Li‐S batteries.     

Fabrication and characterization of electrospun silk fibroin/TiO2 nanofibrous mats for wound dressings

Silk fibroin (SF) nanofibrous mats were fabricated via electrospinning process. These fibers were blended with TiO₂ nanoparticles (TiO₂ NPs). The influence of TiO₂ NPs on the nanofibrous matrices was investigated by scanning electron microscopy (SEM), transmission electron microscopy, energy‐dispersive X‐ray, and thermogravimetric analysis. The SEM images revealed that the average diameter of the SF/TiO₂ fibers was 385 ± 63 nm when the concentration of SF was up to 10% (w/v). Infrared spectra showed that the β‐sheet structure of the silk fibroin increased after acetone treatment. These SF/TiO₂ nanofibrous mats exhibited higher equilibrium water content and water vapor transmission rate than hydrocolloid dressing. The hemocompatibility and cytocompatibility of SF/TiO₂ nanofibrous mats were evaluated by complete blood count, cell attachment, and the spreading of L929 fibroblasts. These SF/TiO₂ nanofibrous mats exhibited antibacterial activity against Escherichia coli under UV irradiation. Thus, these novel nanocomposite mats may be used for biomedical applications such as wound dressing. Copyright © 2011 John Wiley & Sons, Ltd.     

Multifunctional Ag‐Decorated Porous TiO2 Nanofibers in Dye‐Sensitized Solar Cells: Efficient Light Harvesting,Light Scattering,and Electrolyte Contact

Designing the photoanode structure in dye‐sensitized solar cells (DSSCs) is vital to realizing enhanced power conversion efficiency (PCE). Herein, novel multifunctional silver‐decorated porous titanium dioxide nanofibers (Ag/pTiO₂ NFs) made by simple electrospinning, etching, and chemical reduction processes are introduced. The Ag/pTiO₂ NFs with a high surface area of 163 m² g^?1 provided sufficient dye adsorption for light harvesting. Moreover, the approximately 200 nm diameter and rough surface of the Ag/pTiO₂ NFs offered enough light scattering, and the enlarged interpores among the NFs in the photoanode also permitted electrolyte circulation. Ag nanoparticles (NPs) were well dispersed on the surface of the TiO₂ NFs, which prevented aggregation of the Ag NPs after calcination. Furthermore, a localized surface plasmon resonance effect by the Ag NPs served to increase the light absorption at visible wavelengths. The surface area and amount of Ag NPs was optimized. The PCE of pTiO₂ NF‐based DSSCs was 27 % higher (from 6.2 to 7.9 %) than for pure TiO₂ NFs, whereas the PCE of Ag/pTiO₂ NF‐based DSSCs increased by about 12 % (from 7.9 to 8.8 %). Thus, the PCE of the multifunctional pTiO₂ NFs was improved by 42 %, that is, from 6.2 to 8.8 %.     

SiO2/TiO2 Hollow Nanoparticles Decorated with Ag Nanoparticles: Enhanced Visible Light Absorption and Improved Light Scattering in Dye‐Sensitized Solar Cells

Hollow SiO₂/TiO₂ nanoparticles decorated with Ag nanoparticles (NPs) of controlled size (Ag@HNPs) were fabricated in order to enhance visible‐light absorption and improve light scattering in dye‐sensitized solar cells (DSSCs). They exhibited localized surface plasmon resonance (LSPR) and the LSPR effects were significantly influenced by the size of the Ag NPs. The absorption peak of the LSPR band dramatically increased with increasing Ag NP size. The LSPR of the large Ag NPs mainly increased the light absorption at short wavelengths, whereas the scattering from the SiO₂/TiO₂ HNPs improved the light absorption at long wavelengths. This enabled the working electrode to use the full solar spectrum. Furthermore, the SiO₂ layer thickness was adjusted to maximize the LSPR from the Ag NPs and avoid corrosion of the Ag NPs by the electrolyte. Importantly, the power conversion efficiency (PCE) increased from 7.1 % with purely TiO₂‐based DSSCs to 8.1 % with HNP‐based DSSCs, which is an approximately 12 % enhancement and can be attributed to greater light scattering. Furthermore, the PCEs of Ag@HNP‐based DSSCs were 11 % higher (8.1 vs. 9.0 %) than the bare‐HNP‐based DSSCs, which can be attributed to LSPR. Together, the PCE of Ag@HNP‐based DSSCs improved by a total of 27 %, from 7.1 to 9.0 %, due to these two effects. This comparative research will offer guidance in the design of multifunctional nanomaterials and the optimization of solar‐cell performance.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Improved antibacterial properties of an Mg‐Zn‐Ca alloy coated with chitosan nanofibers incorporating silver sulfadiazine multiwall carbon nanotubes for bone implants

Bacteria‐caused infection remains an issue in the treatment of bone defects by means of Mg‐Zn‐Ca alloy implants. This study aimed to improve the antibacterial properties of an Mg‐Zn‐Ca alloy by coating with chitosan‐based nanofibers with incorporated silver sulfadiazine (AgSD) and multiwall carbon nanotubes (MWCNTs). AgSD and MWCNTs were prepared at a weight ratio of 1:1 and then added to chitosan at varying concentrations (ie, 0, 0.25, 0.5, and 1.5 wt.%) to form composites. The obtained composites were ejected in nanofiber form using an electrospinning technique and coated on the surface of an Mg‐Zn‐Ca alloy to improve its antibacterial properties. A microstructural examination by scanning electron microscopy (SEM) revealed the diameter of chitosan nanofiber ejected increased with the concentration of AgSD‐MWCNTs. The incorporation of AgSD‐MWCNTs into the chitosan nanofibers was confirmed by Fourier transform infrared spectroscopy (FTIR). Examination of the antibacterial activity shows that chitosan nanofibers with AgSD‐MWCNTs can significantly inhibit the growth and infiltration of Escherichia coli and Staphylococcus aureus. Biocompatibility assay and cell morphology observations demonstrate that AgSD‐MWCNTs incorporated into nanofibers are cytocompatible. Taken together, the results of this study demonstrate the potential application of electrospun chitosan with AgSD‐MWCNTs as an antibacterial coating on Mg‐Zn‐Ca alloy implants for bone treatment.