Negative Charging of Au Nanoparticles during Methanol Synthesis from CO2/H2 on a Au/ZnO Catalyst: Insights from Operando IR and Near‐Ambient‐Pressure XPS and XAS Measurements

The electronic and structural properties of Au/ZnO under industrial and idealized methanol synthesis conditions have been investigated. This was achieved by kinetic measurements in combination with time‐resolved operando infrared (DRIFTS) as well as in situ near‐ambient pressure X‐ray photoelectron spectroscopy (NAP‐XPS) and X‐ray absorption near‐edge spectroscopy (XANES) measurements at the O K‐edge together with high‐resolution electron microscopy. The adsorption of CO during the reaction revealed the presence of negatively charged Au nanoparticles/Au sites during the initial phase of the reaction. Near‐ambient‐pressure XPS and XANES demonstrate the build‐up of O vacancies during the reaction, which goes along with a substantial increase in the rate of methanol formation. The results are discussed in comparison with previous findings for Cu/ZnO and Au/ZnO catalysts.     

Ti‐Based Catalysts and Photocatalysts: Characterization and Modeling

This perspective article aims to underline how cutting‐edge synchrotron radiation spectroscopies such as extended X‐ray absorption spectroscopy (EXAFS), X‐ray absorption near edge structure (XANES), high resolution fluorescence detected (HRFD) XANES, X‐ray emission spectroscopy (XES) and resonant inelastic X‐ray scattering (RIXS) have played a key role in the structural and electronic characterization of Ti‐based catalysts and photocatalysts, representing an important additional value to the outcomes of conventional laboratory spectroscopies (UV‐Vis, IR, Raman, EPR, NMR etc.). Selected examples are taken from the authors research activity in the last two decades, covering both band‐gap and shape engineered TiO₂ materials and microporous titanosilicates (ETS‐10, TS‐1 and Ti?AlPO‐5). The relevance of the state of the art simulation techniques as a support for experiments interpretation is underlined for all the reported examples.     

In situ extended X-ray absorption fine structure study during selective alcohol oxidation over Pd/Al2O3 in supercritical carbon dioxide

High-pressure in situ X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) data are reported during the selective oxidation of benzyl alcohol to benzaldehyde in supercritical carbon dioxide over a Pd/Al(2)O(3) catalyst (shell impregnated). For this purpose, a continuous-flow system with a spectroscopic cell suitable for in situ X-ray absorption studies on heterogeneous catalysts up to 200 degrees C and 200 bar has been developed. Due to the high contribution of the dense fluid to the overall X-ray absorption, high stability of the process pressure is mandatory, particularly when recording EXAFS spectra. According to EXAFS and XANES results, the palladium particles were fully reduced after exposure to benzyl alcohol in scCO(2). In contrast to Pd-catalyzed liquid-phase oxidation, a higher oxygen tolerance of the catalyst was observed. Palladium was partially oxidized on the surface under typical reaction conditions (0.9 mol % benzyl alcohol/0.5 mol % O(2) in carbon dioxide), which gradually increased when the concentration of oxygen in the feed was raised. Both XANES and EXAFS data uncovered that palladium is mainly oxidized on the surface or within the outermost layers. These results are in accordance with simulations of the XANES data using the FEFF8.20 code (program for ab initio calculations on multiple scattering XAS) and EXAFS data fitting/simulation.     

Semiconductor Nanocrystal Engineering by Applying Thiol‐ and Solvent‐Coordinated Cation Exchange Kinetics

Thiol‐ and solvent‐coordinated cation exchange kinetics have been applied to engineer the composition and crystallinity of novel nanocrystals. The detailed thermodynamics and kinetics of the reactions were explored by NMR spectroscopy, time‐dependent photoluminescence (PL) characterizations and theoretical simulations. The fine structure of the colloidal semiconductor nanocrystals (CSNCs) was investigated by X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS). In this way, high‐quality p‐type Ag‐doped ZnS quantum dots (QDs) and Au@ZnS hetero‐nanocrystals with a cubic phase ZnS shell were synthesized successfully.The unprecedented dominant Ag⁺‐dopant‐induced fluorescence and p‐type conductivity in the zinc‐blende ZnS are reported.     

Bottom‐Up Design of a Copper–Ruthenium Nanoparticulate Catalyst for Low‐Temperature Ammonia Oxidation

A novel nanoparticulate catalyst of copper (Cu) and ruthenium (Ru) was designed for low‐temperature ammonia oxidation at near‐stoichiometric mixtures using a bottom‐up approach. A synergistic effect of the two metals was found. An optimum CuRu catalyst presents a reaction rate threefold higher than that for Ru and forty‐fold higher than that for Cu. X‐ray absorption spectroscopy suggests that in the most active catalyst Cu forms one or two monolayer thick patches on Ru and the catalysts are less active once 3D Cu islands form. The good performance of the tuned Cu/Ru catalyst is attributed to changes in the electronic structure, and thus the altered adsorption properties of the surface Cu sites.     

X–ray absorption fine structure (XAFS) of Si wafer measured using total reflection X–rays

Extended X–ray absorption fine structure (EXAFS) and X–ray absorption near edge structure (XANES) spectra of a Si wafer are measured using grazing incidence X–rays. The spectra are measured using the total electron yield method. Fourier transform of the measured EXAFS oscillation is compared among different glancing angles. It is concluded that the XANES spectra are more sensitive to the surface Si–O bond than the EXAFS spectra. The source of probing depth difference of XAFS spectroscopy estimated by different researchers are discussed.     

Monte‐Carlo simulation of secondary electron emission by x‐ray irradiation—an application of x‐ray absorption near‐edge structure (XANES)

A Monte‐Carlo simulation program has been developed for describing x‐ray absorption near‐edge structure (XANES) observed by synchrotron radiation. The Monte‐Carlo simulation was applied for interpreting XANES spectroscopy on a polycrystalline Ag specimen under synchrotron irradiation with photon energy 3340–3390 eV around the absorption edge of the Ag L_α line at 3352 eV. The results clearly indicate that Monte‐Carlo simulation describes the experimental results with considerable success. Dependence of secondary electron yield on the incident angle of synchrotron radiation was also studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Enhanced CO2 Electroreduction on Neighboring Zn/Co Monomers by Electronic Effect

It is of great significance to reveal the detailed mechanism of neighboring effects between monomers, as they could not only affect the intermediate bonding but also change the reaction pathway. This paper describes the electronic effect between neighboring Zn/Co monomers effectively promoting CO₂ electroreduction to CO. Zn and Co atoms coordinated on N doped carbon (ZnCoNC) show a CO faradaic efficiency of 93.2 % at ?0.5 V versus RHE during a 30‐hours test. Extended X‐ray absorption fine structure measurements (EXAFS) indicated no direct metal–metal bonding and X‐ray absorption near‐edge structure (XANES) showed the electronic effect between Zn/Co monomers. In situ attenuated total reflection‐infrared spectroscopy (ATR‐IR) and density functional theory (DFT) calculations further revealed that the electronic effect between Zn/Co enhanced the *COOH intermediate bonding on Zn sites and thus promoted CO production. This work could act as a promising way to reveal the mechanism of neighboring monomers and to influence catalysis.     

A Reusable Unsupported Rhenium Nanocrystalline Catalyst for Acceptorless Dehydrogenation of Alcohols through γ‐C–H Activation

Rhenium nanocrystalline particles (Re NPs), of 2 nm size, were prepared from NH₄ReO₄ under mild conditions in neat alcohol. The unsupported Re NPs convert secondary and benzylic alcohols to ketones and aldehydes, respectively, through catalytic acceptorless dehydrogenation (AD). The oxidant‐ and acceptor‐free neat dehydrogenation of alcohols to obtain dihydrogen gas is a green and atom‐economical process for making carbonyl compounds. Secondary aliphatic alcohols give quantitative conversion and yield. Transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), Re K‐edge X‐ray absorption near‐edge structure (XANES), and X‐ray absorption fine structure (EXAFS) data confirmed the characterization of the Re NPs as metallic rhenium with surface oxidation to rhenium(IV) oxide (ReO₂). Isotope labeling experiments revealed a novel γ‐CH activation mechanism for AD of alcohols.     

Evolution of the local structure in GaN:O thin films grown by ion‐assisted deposition with film thickness

Optical and optoelectronic properties of gallium nitride strongly depend on the synthesis procedure, which may be related to specific structural characteristics of GaN inherent to each preparation condition. Amorphous and nanocrystalline GaN films have been prepared by ion‐assisted deposition (IAD). The films prepared at 10^?5 Torr for <50 min have shown exploitable optoelectronic properties, in spite of the high concentration of oxygen of these films (up to 25 at.%). We study here the evolution of the local structure around Ga atoms as the deposition time increases. Five IAD GaN films of thickness ranging between 140 and 450 nm on silicon substrates were analysed by x‐ray absorption fine structure (XAFS) at the Ga K‐edge. The first and second shells of neighbouring atoms are clearly identified in the radial distribution functions at approximately 1.9 and 3.2 Å, respectively. In all of the films, Ga seems to be tetrahedrally coordinated to four nitrogen atoms, some of which may be substituted by oxygen. For deposition times <50 min, analysis of both x‐ray adsorption near‐edge structure (XANES) and extended x‐ray adsorption fine structure (EXAFS) regions indicates that the material is highly amorphous. Above this threshold, a peak corresponding to the first coordination sphere of Ga atoms becomes discernible and increases in intensity for longer deposition times, indicating that the second shell of atoms is now more ordered. The pseudo Debye–Waller factor of the Ga shell is used for monitoring the average degree of amorphization in an ～100 nm thick top layer, which seems to be related to the film oxygen content. The XAFS results are compatible with a layered distribution of crystallinity, as has been suggested previously for these films. Copyright © 2005 John Wiley & Sons, Ltd.     

Deactivation of Cu‐Exchanged Automotive‐Emission NH3‐SCR Catalysts Elucidated with Nanoscale Resolution Using Scanning Transmission X‐ray Microscopy

To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NO_x with an ammonia reductant, we employed scanning transmission X‐ray microscopy (STXM) to study Cu‐exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000‐mile aging. X‐ray absorption near‐edge structure (XANES) measurements were performed at the Al K‐ and Cu L‐edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi‐factor‐induced catalytic deactivation. In Cu‐exchanged MFI, a transformation of Cu^II to Cu^I and Cu_xO_y was observed. We also found a spatial correlation between extra‐framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of Cu^I and tri‐coordinated Al. By inspecting both Al and Cu in fresh and aged Cu‐exchanged zeolites, we conclude that the importance of the preservation of isolated Cu^II sites trumps that of Brønsted acid sites for NH₃‐SCR activity.     

Studies about the dispersion process and structure of impregnated CuO/ZrO2 systems

The dispersion process and structure of impregnated CuO/ZrO₂ systems were studied by x‐ray diffraction (XRD) and extended x‐ray absorption fine structure (EXAFS). The results showed that, after being calcined at 773 K, monolayer dispersed cupric nitrate decomposed into monolayer dispersed cupric oxide on zirconia's surface. The dispersion threshold of CuO was related to its precursor, cupric nitrate. The surface‐dispersed Cu nearest coordination structure changed into about five equally long Cu–O bonds. Copyright © 2003 John Wiley & Sons, Ltd.     

X-ray spectroscopic and diffraction study of the structure of the active species in the Ni(II)-catalyzed polymerization of isocyanides.

The structure of the active complex in the Ni-catalyzed polymerization of isocyanides to give polyisocyanides is investigated. It is shown by X-ray absorption spectroscopy (XAS), including EXAFS (extended X-ray absorption fine structure) and XANES (X-ray absorption near edge structure), and single-crystal X-ray diffraction, to contain a carbene-like ligand. This is the first structural characterization of a crucial intermediate in the so-called merry-go-round mechanism for Ni-catalyzed isocyanide polymerization.     

Visualization of the Heterogeneity of Cerium Oxidation States in Single Pt/Ce2Zr2Ox Catalyst Particles by Nano‐XAFS

The cerium oxidation states in single catalyst particles of Pt/Ce₂Zr₂O_x (x=7 to 8) were investigated by spatially resolved nano X‐ray absorption fine structure (nano‐XAFS) using an X‐ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce₂Zr₂O_x single particles of different oxygen compositions x were visualized in the obtained two‐dimensional X‐ray fluorescent (XRF) mapping images and the Ce L_III‐edge nano X‐ray absorption near‐edge structure (nano‐XANES) spectra.     

Low absorption vitreous carbon reactors for operando XAS: a case study on Cu/Zeolites for selective catalytic reduction of NO(x) by NH3

We describe the use of vitreous carbon as an improved reactor material for an operando X-ray absorption spectroscopy (XAS) plug-flow reactor. These tubes significantly broaden the operating range for operando experiments. Using selective catalytic reduction (SCR) of NO(x) by NH(3) on Cu/Zeolites (SSZ-13, SAPO-34 and ZSM-5) as an example reaction, we illustrate the high-quality XAS data achievable with these reactors. The operando experiments showed that in Standard SCR conditions of 300 ppm NO, 300 ppm NH(3), 5% O(2), 5% H(2)O, 5% CO(2) and balance He at 200 °C, the Cu was a mixture of Cu(I) and Cu(II) oxidation states. XANES and EXAFS fitting found the percent of Cu(I) to be 15%, 45% and 65% for SSZ-13, SAPO-34 and ZSM-5, respectively. For Standard SCR, the catalytic rates per mole of Cu for Cu/SSZ-13 and Cu/SAPO-34 were about one third of the rate per mole of Cu on Cu/ZSM-5. Based on the apparent lack of correlation of rate with the presence of Cu(I), we propose that the reaction occurs via a redox cycle of Cu(I) and Cu(II). Cu(I) was not found in in situ SCR experiments on Cu/Zeolites under the same conditions, demonstrating a possible pitfall of in situ measurements. A Cu/SiO(2) catalyst, reduced in H(2) at 300 °C, was also used to demonstrate the reactor's operando capabilities using a bending magnet beamline. Analysis of the EXAFS data showed the Cu/SiO(2) catalyst to be in a partially reduced Cu metal-Cu(I) state. In addition to improvements in data quality, the reactors are superior in temperature, stability, strength and ease of use compared to previously proposed borosilicate glass, polyimide tubing, beryllium and capillary reactors. The solid carbon tubes are non-porous, machinable, can be operated at high pressure (tested at 25 bar), are inert, have high material purity and high X-ray transmittance.     

Gallium-containing zeolites: characterization of catalytic role of gallium species in converting light paraffins to aromatics

The structures and the chemical nature of gallium species in gallium-containing zeolite catalysts prepared by hydrothermal synthesis and post-synthesis treatments are discussed based on the results of X-ray absorption spectroscopy (XAS), including X-ray absorption near edge structure (XANES) and Extended X-ray absorption fine structure (EXAFS), and nuclear magnetic resonance (NMR) investigations. The in-situ analysis of properties of gallium active sites during oxidation/reduction cycles has been found to be further helpful on the understanding of the catalytic role of gallium species in the aromatization of alkanes.     

Copper(I) complex of 1,3‐DimethylBarbituric acid modified SBA‐15 and its catalytic role for the synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones and Imidazoles

An efficient one‐pot method for synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and tri/tetra substituted‐1H‐imidazoles has been accomplished in the presence of catalytic amounts of Cu(I)‐1,3‐dimethylbarbituric acid modified SBA‐15 as heterogeneous catalyst with good to excellent yields. The catalyst is reusable and can be applied several times without any decrease in product yield. The synthesized catalyst was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDS), thermal gravimetric analysis (TGA), N₂ adsorption/desorption isotherms (BET), Fourier transform infrared spectroscopy (FT‐IR) and atomic absorption spectroscopy (AAS).     

Dual Graphitic‐N Doping in a Six‐Membered C‐Ring of Graphene‐Analogous Particles Enables an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Graphene‐based materials still exhibit poor electrocatalytic activities for the hydrogen evolution reaction (HER) although they are considered to be the most promising electrocatalysts. We fabricated a graphene‐analogous material displaying exceptional activity towards the HER under acidic conditions with an overpotential (57 mV at 10 mA cm^?2) and Tafel slope (44.6 mV dec^?1) superior to previously reported graphene‐based materials, and even comparable to the state‐of‐the art Pt/C catalyst. X‐ray absorption near‐edge structure (XANES) and solid‐state NMR studies reveal that the distinct feature of its structure is dual graphitic‐N doping in a six‐membered carbon ring. Density functional theory (DFT) calculations show that the unique doped structure is beneficial for the activation of C?H bonds and to make the carbon atom bonded to two graphitic N atoms an active site for the HER.     

Vanadium Speciation by XANES Spectroscopy: A Three‐Dimensional Approach

A library of X‐ray absorption near‐edge structure (XANES) spectroscopic data for V^V, V^IV and V^III complexes with a broad range of biologically relevant ligand has been used to demonstrate that three‐dimensional plots of key XANES parameters (pre‐edge and edge energies; pre‐edge and white line intensities) can be used for the prediction of V oxidation states and coordination numbers in biological or environmental matrices. The reliability of the technique has been demonstrated by re‐analysis of the published XANES data for a V^V‐dependent bromoperoxidase.     

The Role of Pd2+/Pd0 in Hydrogenation by [Pd(2‐pymo)2]n: An X‐ray Absorption and IR Spectroscopic Study

The metal–organic framework (MOF) [Pd(2‐pymo)₂]_n (2‐pymo=2‐pyrimidinolate) was used as catalyst in the hydrogenation of 1‐octene. During catalytic hydrogenation, the changes at the metal nodes and linkers of the MOF were investigated by in situ X‐ray absorption spectroscopy (XAS) and IR spectroscopy. With the help of extended X‐ray absorption fine structure and X‐ray absorption near edge structure data, Quick‐XAS, and IR spectroscopy, detailed insights into the catalytic relevance of Pd²⁺/Pd⁰ in the hydrogenation of 1‐octene could be achieved. Shortly after exposure of the catalyst to H₂ and simultaneously with the hydrogenation of 1‐octene, the aromatic rings of the linker molecules are hydrogenated rapidly. Up to this point, the MOF structure remained intact. After completion of linker hydrogenation, the linkers were also protonated. When half of the linker molecules were protonated, the onset of reduction of the Pd²⁺ centers to Pd⁰ was observed and the hydrogenation activity decreased, followed by fast reduction of the palladium centers and collapse of the MOF structure. Major fractions of Pd⁰ are only observed when the hydrogenation of 1‐octene is almost finished. Consequently, the Pd²⁺ nodes of the MOF [Pd(2‐pymo)₂]_n are identified as active centers in the hydrogenation of 1‐octene.