Copper nanoparticles incorporated on a mesoporous carbon nitride,an excellent catalyst in the Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles

Cu nanoparticles with average particles size around 10 nm were incorporated on the surface of a mesoporous carbon nitride support. The XRD and N₂ adsorption isotherms show that it maintains a hexagonal mesoporous structure with a high surface area (600.03 m² g^?1). The embedded Cu nanoparticles exhibit extremely high catalytic performance in two different kinds of organic reactions. The Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles were all accomplished.     

Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

Hydrophobic‐Force‐Driven Removal of Organic Compounds from Water by Reduced Graphene Oxides Generated in Agarose Hydrogels

Hydrophobic reduced graphene oxides (rGOs) were generated in agarose hydrogel beads (AgarBs) by NaBH₄ reduction of graphene oxides (GOs) initially loaded in the AgarBs. The resulting rGO‐loaded AgarBs were able to effectively adsorb organic compounds in water as a result of the attractive hydrophobic force between the rGOs in the AgarBs and the organic compounds dissolved in aqueous media. The adsorption capacity of the rGOs was fairly high even toward reasonably water‐soluble organic compounds such as rhodamine B (321.7 mg g^?1) and aspirin (196.4 mg g^?1). Yet they exhibited salinity‐enhanced adsorption capacity and preferential adsorption of organic compounds with lower solubility in water. Such peculiar adsorption behavior highlights the exciting possibility for adopting an adsorption strategy, driven by hydrophobic forces, in practical wastewater treatment processes.     

Colloidal Template Synthesis of Nanomaterials by Using Microporous Organic Nanoparticles: The Case of C@MoS2 Nanoadsorbents

The so‐called colloidal template synthesis has been applied to the preparation of surface‐engineered nanoadsorbents. Colloidal microporous organic network nanotemplates (C‐MONs), which showed a high surface area (611 m² g^?1) and enhanced microporosity, were prepared through the networking of organic building blocks in the presence of poly(vinylpyrrolidone) (PVP). Owing to entrapment of the PVP in networks, the C‐MONs showed good colloidal dispersion in EtOH. MoS₂ precursors were incorporated into the C‐MONs and heat treatment afforded core–shell‐type C@MoS₂ nanoparticles with a diameter of 80 nm, a negative zeta potential (?39.5 mV), a high surface area (508 m² g^?1), and excellent adsorption performance towards cationic dyes (q_max=343.6 and 421.9 mg g^?1 for methylene blue and rhodamine B, respectively).     

Chitin-based magnetic composite for the removal of contaminating substances from aqueous media

A method of obtaining multipurpose magnetic chitin, which combines the magnetic properties of magnetite and the adsorption properties of polysaccharide, was proposed. The possibility of using chitin-(CT) and chitosan (CS)-containing magnetic composites for the adsorption of inorganic ions Co^II and Cr^VI and organic substances (2- and 4-nitrophenols) from aqueous media was analyzed. It was shown that the adsorption capacity of magnetic chitin with respect to Co^II and Cr^VI ions reached 41 mg g^?1 and 15 mg g^?1, respectively. The maximum adsorption capacity for 4-nitrophenol (19 mg g^?1 per CT-containing magnetic composite or 56 mg g^?1 per chitin component) was about three times higher than for 2-nitrophenol. The obtained adsorbent Fe₃O₄/CT is environmentally friendly and reusable.

     

High CO2‐Capture Ability of a Porous Organic Polymer Bifunctionalized with Carboxy and Triazole Groups

A new porous organic polymer, SNU‐C1 , incorporating two different CO₂‐attracting groups, namely, carboxy and triazole groups, has been synthesized. By activating SNU‐C1 with two different methods, vacuum drying and supercritical‐CO₂ treatment, the guest‐free phases, SNU‐C1‐va and SNU‐C1‐sca , respectively, were obtained. Brunauer–Emmett–Teller (BET) surface areas of SNU‐C1‐va and SNU‐C1‐sca are 595 and 830 m²g^?1, respectively, as estimated by the N₂‐adsorption isotherms at 77 K. At 298 K and 1 atm, SNU‐C1‐va and SNU‐C1‐sca show high CO₂ uptakes, 2.31 mmol g^?1 and 3.14 mmol g^?1, respectively, the high level being due to the presence of abundant polar groups (carboxy and triazole) exposed on the pore surfaces. Five separation parameters for flue gas and landfill gas in vacuum‐swing adsorption were calculated from single‐component gas‐sorption isotherms by using the ideal adsorbed solution theory (IAST). The data reveal excellent CO₂‐separation abilities of SNU‐C1‐va and SNU‐C1‐sca , namely high CO₂‐uptake capacity, high selectivity, and high regenerability. The gas‐cycling experiments for the materials and the water‐treated samples, experiments that involved treating the samples with a CO₂‐N₂ gas mixture (15:85, v/v) followed by a pure N₂ purge, further verified the high regenerability and water stability. The results suggest that these materials have great potential applications in CO₂ separation.     

Effect of neighboring groups on the pH responsive adsorption/desorption behaviors of carboxylate functionalized hollow polymer particles

In this article, a serial of bi‐functionalized hollow polymer particles (BF‐HPPs), containing both carboxylate and different amide/amine groups [HPP‐NH₂, HPP‐ethylenediamine (EDA), and HPP‐diethylenetriamine (DETA)], were specially designed and synthesized to investigate the effect of neighboring amino groups on their adsorption/desorption behavior. Due to the high density of carboxylate groups, these BF‐HPPs can serve as efficient adsorbents for selective removal of positively charged methylene blue (b‐MB). With increasing chain length of the neighboring amino groups, the maximum adsorption capacities (q_max) at pH 7 decrease dramatically from 606.1 mg g^?1 for HPP‐NH₂, to 404.9 mg g^?1 for HPP‐EDA, and 332.2 mg g^?1 for HPP‐DETA, due to increasing steric hindrance. Significantly, the equilibrium adsorption can be achieved within 15 min for HPP‐EDA and HPP‐DETA, while it takes more than 720 min for HPP‐NH₂. Moreover, the q_max of HPP‐DETA exhibits remarkable pH‐sensitive property, which decreases sharply to 32.7 mg g^?1 at pH 3 due to strong electrostatic repulsion between positively charged ammonium groups and b‐MB molecules. Accordingly, the desorption efficiency of HPP‐DETA reached up to 94% after one desorption step, which is much higher than that of HPP‐EDA (78%) and HPP‐NH₂ (60%). The absorbed b‐MB can be facilely desorbed and the adsorption capacity of the regenerated HPP‐DETA keeps above 95% after five consecutive adsorption–desorption cycles. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1404–1413     

K2Mn4O8/Reduced Graphene Oxide Nanocomposites for Excellent Lithium Storage and Adsorption of Lead Ions

Ion diffusion efficiency at the solid–liquid interface is an important factor for energy storage and adsorption from aqueous solution. Although K₂Mn₄O₈ (KMO) exhibits efficient ion diffusion and ion‐exchange capacities, due to its high interlayer space of 0.70 nm, how to enhance its mass transfer performance is still an issue. Herein, novel layered KMO/reduced graphene oxide (RGO) nanocomposites are fabricated through the anchoring of KMO nanoplates on RGO with a mild solution process. The face‐to‐face structure facilitates fast transfer of lithium and lead ions; thus leading to excellent lithium storage and lead ion adsorption. The anchoring of KMO on RGO not only increases electrical conductivity of the layered nanocomposites, but also effectively prevents aggregation of KMO nanoplates. The KMO/RGO nanocomposite with an optimal RGO content exhibits a first cycle charge capacity of 739 mA h g^?1, which is much higher than that of KMO (326 mA h g^?1). After 100 charge–discharge cycles, it still retains a charge capacity of 664 mA h g^?1. For the adsorption of lead ions, the KMO/RGO nanocomposite exhibits a capacity of 341 mg g^?1, which is higher than those of KMO (305 mg g^?1) and RGO (63 mg g^?1) alone.     

Open‐Pore Two‐Dimensional MFI Zeolite Nanosheets for the Fabrication of Hydrocarbon‐Isomer‐Selective Membranes on Porous Polymer Supports

Two‐dimensional zeolite nanosheets that do not contain any organic structure‐directing agents were prepared from a multilamellar MFI (ML‐MFI) zeolite. ML‐MFI was first exfoliated by melt compounding and then detemplated by treatment with a mixture of H₂SO₄ and H₂O₂ (piranha solution). The obtained OSDA‐free MFI nanosheets disperse well in water and can be used for coating applications. Deposits made on porous polybenzimidazole (PBI) supports by simple filtration of these suspensions exhibit an n‐butane/isobutane selectivity of 5.4, with an n‐butane permeance of 3.5×10^?7 mol m^?2 s^?1 Pa^?1 (ca. 1000 GPU).     

Gas‐phase chemistry of dihydromyrcenol with ozone and OH radical: Rate constants and products

A bimolecular rate constant, k_{OH + dihydromyrcenol}, of (38 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 2,6‐dimethyl‐7‐octen‐2‐ol (dihydromyrcenol,) at 297 ± 3 K and 1 atm total pressure. Additionally, an upper limit of the bimolecular rate constant, k, of approximately 2 × 10^?18 cm³ molecule^?1 s^?1 was determined by monitoring the decrease in ozone (O₃) concentration in an excess of dihydromyrcenol. To more clearly define part of dihydromyrcenol's indoor environment degradation mechanism, the products of the dihydromyrcenol + OH and dihydromyrcenol + O₃ reactions were also investigated. The positively identified dihydromyrcenol/OH and dihydromyrcenol/O₃ reaction products were acetone, 2‐methylpropanal (O?CHCH(CH₃)₂), 2‐methylbutanal (O?CHCH(CH₃)CH₂CH₃), ethanedial (glyoxal, HC(?O)C(?O)H), 2‐oxopropanal (methylglyoxal, CH₃C(?O)C(?O)H). The use of derivatizing agents O‐(2,3,4,5,6‐pentafluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible dihydromyrcenol/OH and dihydromyrcenol/O₃ reaction mechanisms based on previously published volatile organic compound/OH and volatile organic compound/O₃ gas‐phase reaction mechanisms. © 2006 Wiley Periodicals, Inc. *

1 This article is a US Government work and, as such, is in the public domain of the United States of America

Int J Chem Kinet 38: 451–463, 2006     

Surface modification of malonic acid‐catalyzed carbon xerogels and their high performance for adsorption of Cu (II) ions

The preparation of malonic acid‐catalyzed carbon xerogels modified with nitric acid and their high performance for adsorption of Cu²⁺ were investigated. The treated and untreated carbon xerogels (nitrogen‐doped carbon xerogel and carbon xerogel) are mainly microporous with high surface areas (1150.18 and 1201.46 m² g^?1) based on the analysis of N₂ adsorption isotherm. Fourier transform infrared spectroscopy study demonstrates that modification process generates a number of functional groups such as carboxyl, carbonyl, and nitrate groups. X‐ray photoelectron spectra analysis shows an increase in the content of O and N after oxidation. The adsorption performance for Cu²⁺ using different process parameters like initial concentration, contact time, and temperature was investigated. The result indicates that the pseudo‐second order correlates with the experimental data, and the activation energy of Cu²⁺ adsorption onto nitrogen‐doped carbon xerogel and carbon xerogel is calculated as 15.62 kJ mol^?1 and 2.79 kJ mol^?1, respectively, indicating the coexistence of chemisorption and ion‐exchange. Langmuir and Freundlich isotherms were used to describe the adsorption behavior of Cu²⁺. The adsorption of Cu²⁺ by carbon xerogels modified with nitric acid was fast and had noticeable adsorption capacity, with a higher adsorption capacity than the original carbon xerogels (299.41 vs 260.42 mg g^?1). Copyright © 2013 John Wiley & Sons, Ltd.     

Highly Selective Recovery of Lanthanides by Using a Layered Vanadate with Acid and Radiation Resistance

It is of vital importance to capture lanthanides (nuclear fission products) from waste solutions for radionuclide remediation owing to their hazards. The effective separation of lanthanides are achieved by an acid/base‐stable and radiation‐resistant vanadate, namely, [Me₂NH₂]V₃O₇ ( 1 ). It exhibits high adsorption capacities for lanthanides (q_m^Eu=161.4 mg g^?1; q_m^Sm=139.2 mg g^?1). And high adsorption capacities are maintained over a pH range of 2.0–6.9 (q_m^Eu=75.1 mg g^?1 at low pH of 2.5). It displays high selectivity for Eu³⁺ (simulant of An³⁺) against a large excess of interfering ions. It can efficiently separate Eu³⁺ and Cs⁺ (or Sr²⁺) with the highest separation factor SF_Eu/Cs of 156 (SF_Eu/Sr of 134) to date. The adsorption mechanism is revealed by calculations and XPS, EXAFS, Raman, and elemental analyses. These merits combined with facile synthesis and convenient elution makes the title vanadate a promising lanthanide scavenger for environmental remediation.     

Route to a family of robust, non-interpenetrated metal-organic frameworks with pto-like topology

A combination of topological rules and quantum chemical calculations has facilitated the development of a rational metal–organic framework (MOF) synthetic strategy using the tritopic benzene‐1,3,5‐tribenzoate (btb) linker and a neutral cross‐linker 4,4′‐bipyridine (bipy). A series of new compounds, namely [M₂(bipy)]₃(btb)₄ (DUT‐23(M), M=Zn, Co, Cu, Ni), [Cu₂(bisqui)_0.5]₃(btb)₄ (DUT‐24, bisqui=diethyl (R,S)‐4,4′‐biquinoline‐3,3′‐dicarboxylate), [Cu₂(py)_1.5(H₂O)_0.5]₃(btb)₄ (DUT‐33, py=pyridine), and [Cu₂(H₂O)₂]₃(btb)₄ (DUT‐34), with high specific surface areas and pore volumes (up to 2.03 m³ g^?1 for DUT‐23(Co)) were synthesized. For DUT‐23(Co), excess storage capacities were determined for methane (268 mg g^?1 at 100 bar and 298 K), hydrogen (74 mg g^?1 at 40 bar and 77 K), and n‐butane (99 mg g^?1at 293 K). DUT‐34 is a non‐cross‐linked version of DUT‐23 (non‐interpenetrated pendant to MOF‐14) that possesses open metal sites and can therefore be used as a catalyst. The accessibility of the pores in DUT‐34 to potential substrate molecules was proven by liquid phase adsorption. By exchanging the N,N donor 4,4′‐bipyridine with a substituted racemic biquinoline, DUT‐24 was obtained. This opens a route to the synthesis of a chiral compound, which could be interesting for enantioselective separation.     

The Synthesis of Magnetic Lysozyme‐Imprinted Polymers by Means of Distillation–Precipitation Polymerization for Selective Protein Enrichment

A protein imprinting approach for the synthesis of core–shell structure nanoparticles with a magnetic core and molecularly imprinted polymer (MIP) shell was developed using a simple distillation–precipitation polymerization method. In this work, Fe₃O₄ magnetic nanoparticles were first synthesized through a solvothermal method and then were conveniently surface‐modified with 3‐(methacryloyloxy)propyltrimethoxylsilane as anchor molecules to donate vinyl groups. Next a high‐density MIP shell was coated onto the surface of the magnetic nanoparticles by the copolymerization of functional monomer acrylamide (AAm), cross‐linking agent N,N′‐methylenebisacrylamide (MBA), the initiator azodiisobutyronitrile (AIBN), and protein in acetonitrile heated at reflux. The morphology, adsorption, and recognition properties of the magnetic molecularly imprinted nanoparticles were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and rebinding experiments. The resulting MIP showed a high adsorption capacity (104.8 mg g^?1) and specific recognition (imprinting factor=7.6) to lysozyme (Lyz). The as‐prepared Fe₃O₄@Lyz‐MIP nanoparticles with a mean diameter of 320 nm were coated with an MIP shell that was 20 nm thick, which enabled Fe₃O₄@Lyz‐MIP to easily reach adsorption equilibrium. The high magnetization saturation (40.35 emu g^?1) endows the materials with the convenience of magnetic separation under an external magnetic field and allows them to be subsequently reused. Furthermore, Fe₃O₄@Lyz‐MIP could selectively extract a target protein from real egg‐white samples under an external magnetic field.     

Tailored Organic Electrode Material Compatible with Sulfide Electrolyte for Stable All‐Solid‐State Sodium Batteries

All‐solid‐state sodium batteries (ASSSBs) with nonflammable electrolytes and ubiquitous sodium resource are a promising solution to the safety and cost concerns for lithium‐ion batteries. However, the intrinsic mismatch between low anodic decomposition potential of superionic sulfide electrolytes and high operating potentials of sodium‐ion cathodes leads to a volatile cathode–electrolyte interface and undesirable cell performance. Here we report a high‐capacity organic cathode, Na₄C₆O₆, that is chemically and electrochemically compatible with sulfide electrolytes. A bulk‐type ASSSB shows high specific capacity (184 mAh g^?1) and one of the highest specific energies (395 Wh kg^?1) among intercalation compound‐based ASSSBs. The capacity retentions of 76 % after 100 cycles at 0.1 C and 70 % after 400 cycles at 0.2 C represent the record stability for ASSSBs. Additionally, Na₄C₆O₆ functions as a capable anode material, enabling a symmetric all‐organic ASSSB with Na₄C₆O₆ as both cathode and anode materials.     

Exploring meso-/microporous composite molecular sieves with core-shell structures

A series of core–shell‐structured composite molecular sieves comprising zeolite single crystals (i.e., ZSM‐5) as a core and ordered mesoporous silica as a shell were synthesized by means of a surfactant‐directed sol–gel process in basic medium by using cetyltrimethylammonium bromide (CTAB) as a template and tetraethylorthosilicate (TEOS) as silica precursor. Through this coating method, uniform mesoporous silica shells closely grow around the anisotropic zeolite single crystals, the shell thickness of which can easily be tuned in the range of 15–100 nm by changing the ratio of TEOS/zeolite. The obtained composite molecular sieves have compact meso‐/micropore junctions that form a hierarchical pore structure from ordered mesopore channels (2.4–3.0 nm in diameter) to zeolite micropores (≈0.51 nm). The short‐time kinetic diffusion efficiency of benzene molecules within pristine ZSM‐5 (≈7.88×10^?19 m² s^?1) is almost retainable after covering with 75 nm‐thick mesoporous silica shells (≈7.25×10^?19 m² s^?1), which reflects the greatly opened junctions between closely connected mesopores (shell) and micropores (core). The core–shell composite shows greatly enhanced adsorption capacity (≈1.35 mmol g^?1) for large molecules such as 1,3,5‐triisopropylbenzene relative to that of pristine ZSM‐5 (≈0.4 mmol g^?1) owing to the mesoporous silica shells. When Al species are introduced during the coating process, the core–shell composite molecular sieves demonstrate a graded acidity distribution from weak acidity of mesopores (predominant Lewis acid sites) to accessible strong acidity of zeolite cores (Lewis and Brønsted acid sites). The probe catalytic cracking reaction of n‐dodecane shows the superiority of the unique core–shell structure over pristine ZSM‐5. Insight into the core–shell composite structure with hierarchical pore and graded acidity distribution show great potential for petroleum catalytic processes.     

The Employ of Multiple Voltammetric Pulses for the Study of the Adsorption of Bipyridilium Pesticides in River Sediment

The multiple square‐wave voltammetry (MSWV) allied to gold microelectrode (Au‐ME) was used to establish an electroanalytical procedure for the determination of the paraquat and diquat pesticides in river sediment samples. For both pesticides, two reduction peaks, at around ?0.70 V (peak 1) and around ?1.00 V vs. Ag/AgCl 3.00 mol L^?1 (peak 2), with profile of the totally reversible redox process, were observed. The experimental and voltammetric conditions showed that the best conditions to reduce paraquat and diquat were a pH of 6.0, a frequency of 250 s^?1, a scan increment 2 mV, a square‐wave amplitude of 50 mV and pulse number of 8 pulses of potential in each step of staircase of potential. Under such conditions, the detection limit of 0.044 μg L^?1 (0.044 ppb) and 0.360 μg L^?1 (0.360 ppb ) for peak 1 and peak 2 of paraquat and 0.159 μg L^?1 (0.159 ppb) and 0.533 μg L^?1 (0.533 ppb) for peak 1 and peak 2 of diquat, respectively, were obtained. These results are an order of magnitude of about two less than those obtained and published in the literature. Also, the electroanalytical procedure proposed was applied for the determination of adsorption isotherms of pesticides on river sediments samples collected from Mogi‐Guaçu River in Sao Paulo State, Brazil. The experimental data were fitted using the Langmuir and Freundlich isotherms models; and the results indicated low intensities of adsorption process of the pesticides in the samples employed with distribution coefficients (K_d) lower 5.0, and paraquat showed slightly higher affinity than diquat in the sediments. The increase in organic matter and organic carbon leads to an increase in the K_d values, and consequently an increase in the organic matter constant (K_OM) organic carbon constant (K_OC) values. All results demonstrated that isotherms “L” type in the Giles classification were obtained, indicating that sediments have a medium affinity for the pesticides, and no strong competition from the solvent used (in this case Na₂SO₄) for adsorption sites occurs.     

Efficient removal of cadmium and 2-chlorophenol in aqueous systems by natural clay: Adsorption and photo-Fenton degradation processes

Adsorption and photo-Fenton processes were used as handy tools to ascertain the capability of natural clays to remove cadmium (Cd) and 2-chlorophenol (2-CP) from aqueous solution. Natural Fe-rich clay collected from Tejera-Esghira in Medenine area, south Tunisia, was used as a catalyst in the heterogeneous photo-Fenton oxidation of 2-CP in aqueous solution. Clay samples were acid activated to improve their adsorptive capacity for the removal of Cd. Experimental results indicated that the adsorption of Cd ions onto natural red clay of Tejera-Esghira followed the pseudo-second-order kinetic model. Langmuir model was found to describe the equilibrium data with the calculated maximum adsorption capacity of 23.59 mg g^?1 for acid-activated clay. Photo-Fenton experiments proved high activity of the natural clay catalyst, which was able to completely degrade the phenol present in the treated solution after 30 min and in the presence of ultraviolet light C (UV-C). Total organic carbon and gas chromatography analysis confirmed a 2-CP degradation mechanism toward an almost complete mineralization of the organic compound.     

Incorporating Polyoxometalates into a Porous MOF Greatly Improves Its Selective Adsorption of Cationic Dyes

Various polyoxometalates (POMs) were successfully immobilized to the mesoporous coordination polymer MIL‐101 resulting in a series of POM–MOF composite materials POM@MIL‐101 (POM=K₄PW₁₁VO₄₀, H₃PW₁₂O₄₀, K₄SiW₁₂O₄₀). These materials were synthesized by a simple one‐pot reaction of Keggin POMs, tetramethylammonium hydroxide (TMAH), terephthalic acid (H₂bdc), and Cr³⁺ ions. XRD, FTIR, thermogravimetric analyses (TG), inductively coupled plasma (ICP) spectrometry, and energy‐dispersive X‐ray spectroscopy (EDX) collectively confirmed the successful combination of POMs and the porous framework. Further, these composites POM@MIL‐101 with different loading of POMs were achieved by variation of the POM dosage. Notably, the uptake capacity of MIL‐101 towards organic pollutants in aqueous solution was significantly improved by immobilization of hydrophilic POMs into cages of MIL‐101. An uptake capacity of 371 mg g^?1, comparable to that of the graphene oxide sponges, and much higher than that of the commercial activated carbon, was achieved at room temperature in 5 min when dipping 20 mg PW₁₁V@MIL‐101 in the methylene blue (MB) solution (100 mL of 100 mg L^?1 MB solution). Further study revealed that the POM@MIL‐101 composite materials not only exhibited a fast adsorption rate towards dye molecules, but also possessed of selective adsorption ability of the cationic dyes in wastewater. For example, the adsorption efficiency of PW₁₁V@MIL‐101 (10 mg) towards MB (100 mL of 10 mg L^?1) could reach 98 % in the initial 5 min, and it could capture MB dye molecules from the binary mixture of the MB and MO with similar size. Also, the POM@MIL‐101 materials could be readily recycled and reused, and no POM leached in the dye adsorption process.     

Adsorption properties of BEA zeolites and their aluminum phosphate extrudates for purification of isomaltose

The disaccharide isomaltose is produced via an enzymatic reaction and is adsorbed to BEA zeolite. This reaction integrated adsorption can be achieved as fluidized bed as well as fixed bed. We investigated isotherms, adsorption enthalpies and sorption kinetics of BEA zeolite and extrudates with a novel aluminum phosphate sintermatrix. These extrudates contain 50% (w/w) of BEA 150 zeolites (Si/Al = 75) as primary crystals. BET-surface for extrudates is 245 m²⋅g⁻¹ and 487 m²⋅g⁻¹ for zeolite. Extrudates show a monomodal macropore structure with a maximum at 90 nm. All isotherms show a type I shape. For lower equilibrium concentrations, which occur during the enzymatic reaction, Henry’s law is applied and compared to a Langmuir model. Adsorption equilibrium constant K _i,L calculated from Langmuir for extrudates at 4 °C is 64.7 mL⋅g⁻¹ and more than twice as high as obtained from Henry’s law with K _i is 26.8 mL⋅g⁻¹. Adsorption on extrudates at 4 °C is much stronger than on zeolite crystals where the Henry coefficient K _i is 17.1 mL⋅g⁻¹. Adsorption enthalpy Δh _Ad calculated from van’t Hoff plot with the Henry equation is −44.3 kJ⋅mol⁻¹ for extrudates and −29.6 kJ⋅mol⁻¹ for zeolite crystals. Finally, the kinetics for ad- and desorption were calculated from the initial slope. The diffusion rate for ad- and desorption on extrudates were in the same range while adsorption on zeolites is three orders of magnitudes faster than desorption.