Molecular dynamics simulations of multilayer films of polyelectrolytes and nanoparticles

We performed molecular dynamics simulations of multilayer assemblies of flexible polyelectrolytes and nanoparticles. The film was constructed by sequential adsorption of oppositely charged polymers and nanoparticles in layer-by-layer fashion from dilute solutions. We have studied multilayer films assembled from oppositely charged polyelectrolytes, oppositely charged nanoparticles, and mixed films containing both nanoparticles and polyelectrolytes. For all studied systems, the multilayer assembly proceeds through surface overcharging after completion of each deposition step. There is almost linear growth in the surface coverage and film thickness. The multilayer films assembled from nanoparticles show better layer stratification but at the same time have higher film roughness than those assembled from flexible polyelectrolytes.     

Molecular dynamics simulations of multilayer polyelectrolyte films: effect of electrostatic and short-range interactions

The effect of the strength of electrostatic and short-range interactions on the multilayer assembly of oppositely charged polyelectrolytes at a charged substrate was studied by molecular dynamics simulations. The multilayer buildup was achieved through sequential adsorption of charged polymers in a layer-by-layer fashion from dilute polyelectrolyte solutions. The strong electrostatic attraction between oppositely charged polyelectrolytes at each deposition step is a driving force behind the multilayer growth. Our simulations have shown that a charge reversal after each deposition step is critical for steady multilayer growth and that there is a linear increase in polymer surface coverage after the first few deposition steps. Furthermore, there is substantial intermixing between chains adsorbed during different deposition steps. We show that the polymer surface coverage and multilayer structure are each strongly influenced by the strength of electrostatic and short-range interactions.     

Phase diagram for the adsorption of weak polyelectrolytes at a soft charged surface

We have experimentally studied the adsorption of polyelectrolytes at oppositely charged surfaces. A weak flexible polyelectrolyte, poly(acrylic acid), was adsorbed from dilute solutions on a Langmuir film of a cationic amphiphile, dimethyldioctadecylammonium bromide. The polymer surface coverage, Gamma, at equilibrium was measured by two reflectivity techniques-ellipsometry and polarization modulated infrared reflection absorption spectroscopy (PM-IRRAS)-as a function of the surface charge density, sigma, and of the polymer ionization degree, alpha. Different adsorption regimes were evidenced. For weakly charged surfaces, sigma < sigma sat, Gamma increases with sigma and with 1/alpha, as expected for a neutralization of the surface by the adsorbed polymers. For highly charged surfaces, sigma > sigma sat, the adsorption of polyelectrolytes saturates. The mean orientation of the adsorbed chains also depends on the value of sigma: it is parallel to the surface for sigma < sigma (< sigma sat) and orthogonal to the surface for sigma > sigma. We have measured the values of sigma sat and sigma as a function of alpha and compared the results with existing theories.     

Peculiarities of the formation of polyacrylamide compound-based polyelectrolyte complexes in the course of the flocculation of clay-salt dispersions

Peculiarities of the formation of polyelectrolyte complexes based on cationic and anionic copolymers of acrylamide having different macromolecule charge densities on the surfaces of kaolin particles in highly concentrated salt solution are investigated. The interactions of the copolymers with the clay particle surface and with each other are studied by electrokinetic and IR spectroscopy methods. The rheological properties of kaolin suspensions are investigated in a salt solution in the presence of the polyelectrolytes. The flocculation ability of the polyelectrolytes and their binary mixtures with respect to clay-salt dispersion is estimated. The mechanism for the formation of polyelectrolyte complexes on the surface of clay particles is discussed. It is shown that the complexation of oppositely charged polyelectrolytes on the surfaces of clay particles intensifies the flocculation of clay-salt dispersions.     

Fluorescence and ESR studies of the conformational behavior of oppositely charged polyelectrolytes at solid/liquid interfaces

The conformational behavior of oppositely charged polyelectrolytes on alumina in solutions was investigated by means of excimer fluorescence and electron spin resonance spectroscopy using maleic acid-propene copolymer labeled with pyrene or TEMPO. It was found that the ability of the polyanion at the surface for conformational rearrangements is strongly influenced by the constraints of the adsorbed state that restrict its complexation. Polyelectrolyte complexes (PEC) formed by mixing of the oppositely charged polyelectrolytes exhibited extreme coiling due to the screening of the charged groups. The polyelectrolytes undergo spreading during the adsorption process due to the electrostatic attraction. Surface binding can irreversibly limit the flexibility for the reconformation process to a great extent. It is also shown here that a flatter adsorbed state could be reached by sequential adsorption of polyanion and polycation than could be reached by the direct adsorption of the polyelectrolyte complex itself.     

Polymer/surfactant interactions at the air/water interface

The development of neutron reflectometry has transformed the study and understanding of polymer/surfactant mixtures at the air/water interface. A critical assessment of the results from this technique is made by comparing them with the information available from other techniques used to investigate adsorption at this interface. In the last few years, detailed information about the structure and composition of adsorbed layers has been obtained for a wide range of polymer/surfactant mixtures, including neutral polymers and synthetic and naturally occurring polyelectrolytes, with single surfactants or mixtures of surfactants. The use of neutron reflectometry together with surface tensiometry, has allowed the surface behaviour of these mixtures to be related directly to the bulk phase behaviour. We review the broad range of systems that have been studied, from neutral polymers with ionic surfactants to oppositely charged polyelectrolyte/ionic surfactant mixtures. A particular emphasis is placed upon the rich pattern of adsorption behaviour that is seen in oppositely charged polyelectrolyte/surfactant mixtures, much of which had not been reported previously. The strong surface interactions resulting from the electrostatic attractions in these systems have a very pronounced effect on both the surface tension behaviour and on adsorbed layers consisting of polymer/surfactant complexes, often giving rise to significant surface ordering.     

Molecular dynamics simulations of polyelectrolyte adsorption

We have performed molecular dynamics simulations of polyelectrolyte adsorption at oppositely charged surfaces from dilute polyelectrolyte solutions. In our simulations, polyelectrolytes were modeled by chains of charged Lennard-Jones particles with explicit counterions. We have studied the effects of the surface charge density, surface charge distribution, solvent quality for the polymer backbone, strength of the short-range interactions between polymers and substrates on the polymer surface coverage, and the thickness of the adsorbed layer. The polymer surface coverage monotonically increases with increasing surface charge density for almost all studied systems except for the system of hydrophilic polyelectrolytes adsorbing at hydrophilic surfaces. In this case the polymer surface coverage saturates at high surface charge densities. This is due to additional monomer-monomer repulsion between adsorbed polymer chains, which becomes important in dense polymeric layers. These interactions also preclude surface overcharging by hydrophilic polyelectrolytes at high surface charge densities. The thickness of the adsorbed layer shows monotonic dependence on the surface charge density for the systems of hydrophobic polyelectrolytes for both hydrophobic and hydrophilic surfaces. Thickness is a decreasing function of the surface charge density in the case of hydrophilic surfaces while it increases with the surface charge density for hydrophobic substrates. Qualitatively different behavior is observed for the thickness of the adsorbed layer of hydrophilic polyelectrolytes at hydrophilic surfaces. In this case, thickness first decreases with increasing surface charge density, then it begins to increase.     

Molecular dynamics simulations of layer-by-layer assembly of polyelectrolytes at charged surfaces: effects of chain degree of polymerization and fraction of charged monomers

We performed molecular dynamics simulations of the electrostatic assembly of multilayers of flexible polyelectrolytes at a charged surface. The multilayer build-up was achieved through sequential adsorption of oppositely charged polymers in a layer-by-layer fashion from dilute polyelectrolyte solutions. The steady-state multilayer growth proceeds through a charge reversal of the adsorbed polymeric film which leads to a linear increase in the polymer surface coverage after completion of the first few deposition steps. Moreover, substantial intermixing between chains adsorbed during different deposition steps is observed. This intermixing is consistent with the observed requirement for several deposition steps to transpire for completion of a single layer. However, despite chain intermixing, there are almost perfect periodic oscillations of the density difference between monomers belonging to positively and negatively charged macromolecules in the adsorbed film. Weakly charged chains show higher polymer surface coverage than strongly charged ones.     

In-situ investigation of the adsorption of globular model proteins on stimuli-responsive binary polyelectrolyte brushes

Binary brushes constituted from two incompatible polymers can be used in the form of ultrathin polymeric layers as a versatile tool for surface engineering to tune physicochemical surface characteristics such as wettability, surface charge, chemical composition, and morphology and furthermore to create responsive surface properties. Mixed brushes of oppositely charged weak polyelectrolytes represent a special case of responding surfaces that are sensitive to changes in the pH value of the aqueous environment and therefore represent interesting tools for biosurface engineering. The polyelectrolyte brushes used for this study were composed of two oppositely charged polyelelctrolytes poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA). The in-situ properties and surface characteristics such as as surface charge, surface tension, and extent of swelling of these brush layers are functions of the pH value of the surrounding aqueous solution. To test the behavior of the mixed polylelctrolyte brushes in contact with biosystems, protein adsorption experiments with globular model proteins were performed at different pH values and salt concentrations (confinement of counterions) of the buffer solutions. The influence of the pH value, buffer salt concentration, and isoelectric points (IEP) of the brush and protein on the adsorbed amount and the interfacial tension during protein adsorption as well as the protein adsorption mechanism postulated in reference to recently developed theories of protein adsorption on polyelectrolyte brushes is discussed. In the salted regime, protein adsorption was found to be similar to the often-described adsorption at hydrophobic surfaces. However, in the osmotic regime the balance of electrostatic repulsion and a strong entropic driving force, "counterion release", was found to be the main influence on protein adsorption.     

The role of complex formation in the flocculation of negatively charged sols with anionic polyelectrolytes

Summary Flocculation of negatively charged colloids by anionic polyelectrolytes, resulting from the adsorption of polymers on the colloid surface and from bridging of polymer chains between solid particles, is only possible if an appropriate concentration of electrolyte is present in the solution. Complex formation in the immediate vicinity of the sol surface between the counter cation and the functional groups of the polyelectrolyte plays a major role in the attachment of anionic polyelectrolytes to negative hydrophobic sols.Stability constants for Cu(II) polyacrylate and for the Ca complexes of a polyacrylic acid, hydrolyzed polyacrylamide and polystyrene sulfonate have been determined, and the effect of solution variables upon flocculation of AgBr/Br^– sols by anionic polyelectrolytes have been investigated. Ca⁺² ions affect the adsorption of polystyrenesulfonate on a negatively polarized mercury surface, as reflected in measurements of the differential capacitance; the presence of complex bound functional groups apparently changes the structure and orientation ability of the adsorbed polymer.With 5 figures in 10 details and 2 tables     

A novel biosensing interfacial design based on the assembled multilayers of the oppositely charged polyelectrolytes

A novel biosensing interfacial design strategy has been produced by the alternate adsorption of the oppositely charged polyelectrolytes. A quartz-crystal microbalance (QCM) as a model transducer was modified by use of mercaptoacetic acid (MAA) self-assembled monolayer (SAM) and the adsorption multilayers of the oppositely charged polyelectrolytes. MAA-SAM was first applied to the gold electrode surface of the crystal, and the positively charged chitosan was used as a double-sided linker to attach the negatively charged alginate-HSA antibodies to the negatively charged MAA-SAM layer. The assembly process and conditions were studied using the real-time output device and the surface topologies of the resulting crystals were characterized by atomic force microscopy (AFM) imaging. It is discovered that the optimal pH of immobilizing antibodies was 7.2 and the suited dilution ratio of antibodies was 10:30. The proposed immunosensor in optimal conditions has a linear detection range of 12.3-184.5 μg/mL for HSA detection. Comparing with the direct immobilization method of antibodies, the immunosensor with the proposed immobilization procedure shows some advantages, such as improved sensitivity due to the well-retained antibody activity and the significantly extended detection range. In particular, the regeneration of the developed immunosensor was simple and fast. Analytical results indicate that the developed immobilization procedure is a promising alternative for the immobilization of biorecognition element on the electrode surface.     

Surface properties of bottle-brush polyelectrolytes on mica: effects of side chain and charge densities

Surface properties of a series of cationic bottle-brush polyelectrolytes with 45-unit-long poly(ethylene oxide) side chains were investigated by phase modulated ellipsometry and surface force measurements. The evaluation of the adsorbed mass of polymer on mica by means of ellipsometry is complex due to the transparency of mica and its birefringence and low dielectric constant. We therefore employed a new method to overcome these difficulties. The charge and the poly(ethylene oxide) side chain density of the bottle-brush polymers were varied from zero charge density and one side chain per segment to one charge per segment and no side chains, thus spanning the realm from a neutral bottle-brush polymer, via a partly charged brush polyelectrolyte, to a linear fully charged polyelectrolyte. The adsorption properties depend crucially on the polymer architecture. A minimum charge density of the polymer is required to facilitate adsorption to the oppositely charged surface. The maximum adsorbed amount and the maximum side chain density at the surface are obtained for the polymer with 50% charged segments and the remaining 50% of the segments carrying poly(ethylene oxide) side chains. It is found that brushlike layers are formed when 25-50% of the segments carry poly(ethylene oxide) side chains. In this paper, we argue that the repulsion between the side chains results in an adsorbed layer that is non-homogeneous on the molecular level. As a result, not all side chains will contribute equally to the steric repulsion but some will be stretched along the surface rather than perpendicular to it. By comparison with linear polyelectrolytes, it will be shown that the presence of the side chains counteracts adsorption. This is due to the entropic penalty of confining the side chains to the surface region.     

Entropy and enthalpy of polyelectrolyte complexation: Langevin dynamics simulations

We report a systematic study by Langevin dynamics simulation on the energetics of complexation between two oppositely charged polyelectrolytes of same charge density in dilute solutions of a good solvent with counterions and salt ions explicitly included. The enthalpy of polyelectrolyte complexation is quantified by comparisons of the Coulomb energy before and after complexation. The entropy of polyelectrolyte complexation is determined directly from simulations and compared with that from a mean-field lattice model explicitly accounting for counterion adsorption. At weak Coulomb interaction strengths, e.g., in solvents of high dielectric constant or with weakly charged polyelectrolytes, complexation is driven by a negative enthalpy due to electrostatic attraction between two oppositely charged chains, with counterion release entropy playing only a subsidiary role. In the strong interaction regime, complexation is driven by a large counterion release entropy and opposed by a positive enthalpy change. The addition of salt reduces the enthalpy of polyelectrolyte complexation by screening electrostatic interaction at all Coulomb interaction strengths. The counterion release entropy also decreases in the presence of salt, but the reduction only becomes significant at higher Coulomb interaction strengths. More significantly, in the range of Coulomb interaction strengths appropriate for highly charged polymers in aqueous solutions, complexation enthalpy depends weakly on salt concentration and counterion release entropy exhibits a large variation as a function of salt concentration. Our study quantitatively establishes that polyelectrolyte complexation in highly charged Coulomb systems is of entropic origin.     

Molecular dynamics simulations of polyelectrolyte multilayering on a charged particle

Molecular dynamics simulations of polyelectrolyte multilayering on a charged spherical particle revealed that the sequential adsorption of oppositely charged flexible polyelectrolytes proceeds with surface charge reversal and highlighted electrostatic interactions as the major driving force of layer deposition. Far from being completely immobilized, multilayers feature a constant surge of chain intermixing during the deposition process, consistent with experimental observations of extensive interlayer mixing in these films. The formation of multilayers as well as the extent of layer intermixing depends on the degree of polymerization of the polyelectrolyte chains and the fraction of charge on its backbone. The presence of ionic pairs between oppositely charged macromolecules forming layers seems to play an important role in stabilizing the multilayer film.     

Adsorption of polyelectrolytes on colloidal latex particles, electrostatic interactions and stability behaviour

The stabilization and flocculation behaviour of colloidal latex particles covered with cationic polyelectrolytes (PE) is studied with photon correlation spectroscopy and zetapotential measurements. Diffusion coefficients, flocculation rate constants and zetapotentials have been determined as a function of adsorbed amount of cationic poly-(diallyl-dimethyl-ammoniumchloride) (PDADMAC) of different molar masses and of statistic copolymers of DADMAC and N-methyl-N-vinyl-acetamide (NMVA) of various compositions in water and at high ionic strength. Flocculation by van der Waals attraction can be observed if the zetapotential is low. This occurs, if the surface charge is screened by the oppositely charged cations. Furthermore, in the case of adsorption of high molecular polycations mosaic flocculation occurs if the adsorbed amount is low. At high ionic strength, flocculation takes place if the adsorbed amount is below the adsorption plateau. If the adsorption plateau is reached the suspensions become stabilized. In water the charge reversal at full coverage leads to electrosteric stabilization both with low and high molar mass polycations. At high ionic strength only polycations with high molar mass are able to stabilize the suspension. If a certain molar mass of the polycation is exceeded, steric stabilization of the suspension occurs due to the formation of long adsorbed PE tails and their osmotic repulsion. The layer thicknesses are determined as a function of the molar mass. Received: 4 July 2000/Accepted: 18 August 2000     

Characterization of complexation and phase behavior of mixed systems of unmodified and hydrophobically modified oppositely charged polyelectrolytes

This paper reports turbidity, rheology, zeta potential, and rheo-small angle light scattering measurements on aqueous mixtures of oppositely charged and hydrophobically modified hydroxyethylcellulose derivatives (HM-HEC(?) and HM-HEC(+)) and mixtures of oppositely charged hydroxyethylcellulose (HEC(?) and HEC(+)). The experiments were restricted to the one-phase region, i.e., at mixing ratios before and after the two-phase area. The associative phase separation behavior usually observed when mixing oppositely charged polyelectrolytes was undetectable in the mixtures of the polyelectrolytes without attached hydrophobic groups. Upon modification of HEC by incorporation of pendant hydrophobic groups and by introducing charges of negative or positive sign (HM-HEC(?) and HM-HEC(+)), the mixtures showed phase separation over a certain mixing interval, revealing the existence of large polyelectrolyte complexes. The zero shear viscosity was strongly dependent on both the hydrophobicity of the polymers and the mixing ratio, increasing significantly with hydrophobic modification of polyelectrolytes. The strong enhancement of the turbidity and the viscosity drop as the two-phase area is approached suggest the formation of fragmented non-connected complexes. This work demonstrates that if the oppositely charged polyions have a hydrophilic character, it is not necessary that the attractive Coulombic forces induce insoluble polyelectrolyte complexes.     

Precipitation of inorganic salts inside hollow micrometer-sized polyelectrolyte shells

Hollow polymer shells formed by layer-by-layer adsorption of oppositely charged polyelectrolytes onto micrometer-sized colloidal particles with subsequent decomposition of the colloidal core were employed as a model system for the study of inorganic crystallization reactions in restricted volumes. The size-selective permeability of shells is used for spatially controlling the precipitation of inorganic salts CaCO3 and BaCO3 into the shell interior. Outside the shells the precipitation was suppressed by the polymers, which are unable to penetrate the shell wall. The precipitates were studied by scanning electron microscopy and atomic force microscopy. The fundamental and applied aspects of research on spatially confined synthesis of inorganic particles are under discussion.     

Interpolymer complex formation of some nonionogenic polymers with linear and crosslinked polyacrylic acid

The formation of interpolymer complexes on the surface of crosslinked poly (acrylic acid) with some nonionogenic polymers is compared with the complex formation in analogous linear polymer systems. The behavior of these systems is compared with that of complexes of two oppositely charged polyelectrolytes. The concentration redistribution of the linear polymer in the system polyelectrolyte network-polymer solution and the degree of swelling of this network in these solutions were determined. © 1994 John Wiley & Sons, Inc.     

Computer Simulations of Interpolyelectrolyte Complexes Formed by Star-like Polymers and Linear Polyelectrolytes

Complexes formed by star-like polymers of various topology and oppositely charged linear polyelectrolytes were simulated using Brownian dynamics technique. Structural properties and their dependence on the polyelectrotyte charge were investigated and compared with similar data for complexes with dendrimers. Remarkable overcharging was observed for all stars in complexes.     

Preparation of pickering-emulsion-based capsules with shells composed of titanium dioxide nanoparticles and polyelectrolyte layers

A procedure has been proposed for the preparation of capsules with shells composed of titanium dioxide nanoparticles and polymers via the formation of Pickering emulsions (colloidosomes) followed by layer-by-layer deposition of polyelectrolytes. The feasibility of stabilizing oil droplets of emulsions by spontaneous adsorption of partly hydrophobized nanoparticles of anatase-form titanium dioxide at the oil/water interface has been studied. Conditions have been determined for the formation of stable colloidosomes and the subsequent layer-by-layer deposition of oppositely charged polyelectrolytes onto their surfaces. It has been shown that hydrophobic dyes may be encapsulated using the procedure developed for the preparation of the capsules. The photocatalytic activity of TiO₂ particles occurring in the shell has been demonstrated by the example of degradation of Nile red which is incorporated in the oil core of a capsule.