AB型聚乙二醇单甲醚-聚(L-丙氨酸)嵌段共聚物自组装过程的核磁共振研究

利用核磁共振方法研究了AB型双嵌段共聚物(MPEG45-b-PA32)在选择性溶剂中的自组装行为及胶束化过程.嵌段共聚物在三氟乙酸中聚氨基酸和聚乙二醇链段均处于自由运动状态,聚丙氨酸链段为无规线团结构.在向该溶液中逐渐加入氘代水的过程中,聚丙氨酸链段又重新聚集形成规整的二级结构.结合1H-NMR和COSY谱分析,结果显示这一自组装过程伴随着聚(L-丙氨酸)链段由无规线团向α-螺旋结构的构象转变,同时嵌段共聚物逐渐形成核-壳型胶束结构.利用透射电镜观察了所形成胶束的形态,嵌段共聚物主要形成粒径150 nm到220 nm的球形胶束.     

利用酶促开环聚合和原子转移自由基聚合方法合成AB型嵌段共聚物

我们用端基官能化方法实现两种聚合反应的结合, 成功地制备了AB型双嵌段共聚物PCL-b-PSt和BAB型三嵌段共聚物PSt-b-PCL-b-PSt. 本文利用上述方法, 将酶促开环聚合和原子转移自由基聚合有机地结合起来, 合成了AB型嵌段共聚物-聚己内酯/聚甲基丙烯酸环氧丙酯(PCL-b-PGMA. 此嵌段共聚物具有良好的生物相容性, 在现代生物领域具有广泛的应用前景.     

聚(苯乙烯-ε-己内酯)嵌段共聚物的研究

本文采用活性阴离子聚合方法合成聚(苯乙烯-ε-己内酯)嵌段共聚物。研究了聚合反应条件,并用GPC、柱上溶解分级及红外光谱进行表征。对产物进行结构分析,产物为聚(苯乙烯-ε-己内酯)嵌段共聚物,具有多相结构,是由无定形聚苯乙烯链段、无定形聚-ε-己内酯链段和结晶型聚-ε-己内酯链段组成的嵌段共聚物。对该嵌段共聚物的性能进行了测试。     

两亲性二嵌段共聚物MPEG44-b-Phe的合成及其在水溶液中的自组装

利用光气法,以三光气和苯丙氨酸为原料,合成了苯丙氨酸酸酐(b-Phe-NCA).用端氨基聚乙二醇单甲醚(MPEG-NH2)作大分子引发剂,引发b-Phe-NCA开环聚合,合成了不同分子量的聚乙二醇单甲醚-聚(L-苯丙氨酸)(MPEG44-b-Phe)AB型二嵌段共聚多肽.利用IR1、H-NMR、GPC对共聚物结构进行了表征.利用TEM研究了二嵌段共聚多肽MPEG44-b-Phe50及MPEG44-b-Phe7在水溶液中的自组装形态,结果表明合成出的两亲性二嵌段共聚物在水溶液中自组装形成胶束,随着嵌段共聚物中亲水嵌段含量的增高,共聚物溶水性增强,其在水溶液中的自组装形态更加均一.     

以聚α,α-二甲基-β-丙内酯为硬段的三嵌段共聚物的合成与性质

合成了以聚α,α-二甲基-β-丙内酯(PPVL)为硬段,聚己二酸1,2-丙二醇酯(PPA)、聚丁二烯(PBD)及氢化聚丁二烯(HPBD)为软段的ABA型嵌段共聚物及以聚α-甲基苯乙烯(PαMS)和PPVL为硬段,PBD为软段的ABC型嵌段共聚物。发现嵌段共聚物中PPVL的1/T_m∝[软段]/[PPVL],软段含量对降低T_m与力学性能的影响均为PPVL-PPA-PPVL>PPVL-HPBD-PPVL>PPVL-PBD-PPVL,符合软硬段相容性下降的趋势;PPVL-PBD-PαMS的力学性能低于PPVL-PBD-PPVL与PαMS-PBD-PαMS,是因结晶的PPVL与无规的PαMS互不相容。     

聚二甲基硅氧烷-聚对苯二甲酸酚酞酯嵌段共聚物的合成及表征

用低温溶液法合成了以聚二甲基硅氧烷(PSX)为软段、聚对苯二甲酸酚酞酯(PAE)为硬段的〔-(AB)-_n〕型多嵌段共聚物。对共聚物结构的表征表明,使用该方法可得到硅氧烷含量可控的分子量较高的共聚物。随软段长度及含量的不同,既可得到弹性体也可得到较坚硬的材料。共聚物具有两相结构、较好的力学性能、耐热性及成膜性。     

一种含乙氧羰基偶氮苯液晶三嵌段共聚物的合成与表征

利用原子转移自由基聚合(ATRP),合成了一种含有乙氧羰基偶氮苯的液晶三嵌段共聚物,并合成了一种同样偶氮生色团的均聚物进行对比.均聚物(PC6ET)由偶氮单体甲基丙烯酸{6-[4-(4-乙氧羰基苯基偶氮)苯氧基]己酯}(C6ET)的ATRP反应制备.嵌段共聚物的合成,先通过聚环氧乙烷(PEO)和过量的2-溴异丁酰溴、三乙胺反应,得到双端大分子引发剂(Br-PEO-Br);再进一步通过C6ET的ATRP反应,得到了三嵌段共聚物(PC6ET-PEO-PC6ET).热分析、偏光显微镜观察和X射线衍射实验证实,合成的均聚物和嵌段共聚物均为近晶型液晶聚合物.三嵌段共聚物的液晶清亮点比均聚物的稍低.     

温度响应型手性Salen Ti~(IV)嵌段共聚物的可控制备及在硫醚不对称氧化反应中的应用

采用可逆加成-断裂链转移自由基聚合法(RAFT),以N-异丙基丙烯酰胺和5-乙烯基手性salen Ti~(IV)为反应单体,偶氮二异丁腈为链引发剂,硫代丙酸苄硫酯为链转移剂,可控制备出一系列温度响应型手性嵌段共聚物(聚N-异丙基丙烯酰胺-co-手性salen Ti~(IV),PNxSy).通过红外表征证明该嵌段共聚物结构中含有温敏材料和salen Ti~(IV)的特征峰,紫外表征揭示了亲疏水单元比例对嵌段共聚物临界温度LCST的影响,动态光散射证明亲疏水比例对嵌段共聚物水合动力学粒径影响规律.透射电子显微镜和圆二色光谱表征温度对嵌段共聚物自组装的影响,结果表明,接近临界温度30℃时,嵌段共聚物的CD信号最强.该类温度响应型手性嵌段共聚物可实现纯水相中高效不对称反应的进行,仅需0.5 mol%嵌段共聚物催化反应1.0 h,即可实现底物苯甲硫醚转化率达95%,选择性为97%,对映选择性高达98%.实验证明嵌段共聚物在水中可自组装形成纳米反应器,加速反应进行,升温后,嵌段共聚物表现出疏水特性,从水相析出后直接回收,实现了材料可重复利用.     

嵌段共聚物和星型均聚物共混体系相行为的自洽场理论研究

用自洽场理论方法(Self-consistent field theory, SCFT)计算了嵌段共聚物AB和三等臂星型均聚物A共混体系的微相形态. 为了简化计算, 着重讨论了固定嵌段共聚物本体的相形态(如层状相)时, 所加入的均聚物的体积分数及均聚物与嵌段共聚物链长之比对体系相形态的影响; 并结合体系的熵和相互作用能的变化, 讨论了星型均聚物在体系微相结构中的分布.     

均聚物/两嵌段共聚物/均聚物三元聚合物共混体系界面性质的Monte Carlo模拟

利用格子Monte Carlo(MC)模拟方法研究了两嵌段共聚物增容剂AB的链长及浓度对不相容性均聚物A/B共混体系界面性质的影响.研究结果表明,当两嵌段共聚物的体积分数φC=0.05时,随着两嵌段共聚物分子链长NC从10增至20,界面厚度剧烈减小,而当两嵌段共聚物的分子链长NC进一步增加到60时,界面厚度轻微增加;两嵌段共聚物的取向参数q随着分子链长的增长而增加,即共聚物分子在垂直界面方向的拉伸程度增大.当两嵌段共聚物AB的分子链长NC固定为10时,随着链浓度增大,界面厚度增加,共聚物分子链取向参数q减小,共聚物分子在垂直界面方向的拉伸程度减小.     

SYNTHESIS OF AB AND ABA TYPES POLYSTYRENE (A)-POLYOXYETHYLENE(B) BLOCK COPOLYMERS AND CHARACTERIZATION OF THEIR STRUCTURES

α-Phenyl ethyl potassium was synthesized and used in the preparation of AB type polysty-rene (A)-polyoxyethylene (B) block copolymer. The effects of polymerization time and temperaturewere studied. ABA type block copolymers were prepared by combining AB type block copolymerscontaining one hydroxyl end group using toluene diisocyanate as coupling agent. Both copolymerswere purified, characterized by NMR, IR, UV. DSC, polarized microscopy and X-ray diffractionmethod and compared with mixture of homopolymers.     

Synthesis of ABA‐triblock and star‐diblock copolymers with poly(2‐adamantyl vinyl ether) and poly(n‐butyl vinyl ether) segments: New thermoplastic elastomers composed solely of poly(vinyl ether) backbones

ABA‐type triblock copolymers and AB‐type star diblock copolymers with poly(2‐adamantyl vinyl ether) [poly(2‐AdVE)] hard outer segments and poly(n‐butyl vinyl ether) [poly(NBVE)] soft inner segments were synthesized by sequential living cationic copolymerization. Although both the two polymer segments were composed solely of poly(vinyl ether) backbones and hydrocarbon side chains, they were segregated into microphase‐separated structure, so that the block copolymers formed thermoplastic elastomers. Both the ABA‐type triblock copolymers and the AB‐type star diblock copolymers exhibited rubber elasticity over wide temperature range. For example, the ABA‐type triblock copolymers showed rubber elasticity from about ?53 °C to about 165 °C and the AB‐type star diblock copolymer did from about ?47 °C to 183 °C with a similar composition of poly(2‐AdVE) and poly(NBVE) segments in the dynamic mechanical analysis. The AB‐type star diblock copolymers exhibited higher tensile strength and elongation at break than the ABA‐type triblock copolymers. The thermal decomposition temperatures of both the block copolymers were as high as 321–331 °C, indicating their high thermal stability. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The synthesis and solution behaviors of novel amphiphilic block copolymers based on d-galactopyranose and 2-(dimethylamino)ethyl methacrylate

A series of novel stimuli-responsive AB, ABA, and BAB type block copolymers based on 6-O-methacryloyl-1,2:3,4-di-O-isopropylidene-d-galactopyranose (MAIpGP:A block) and 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA: B block) were synthesized via ATRP techniques using ethyl 2-bromoisobutyrate (EBiB) as monofunctional ATRP initiator in the case of diblock copolymer and diethyl meso-2,5-dibromoadipate (DEDBA) as bifunctional ATRP initiator in the case of triblock copolymers. The PMAIpGP blocks of the AB, ABA, and BAB type linear block copolymers were converted to water soluble PMAGP blocks via deprotection process under mild acidic conditions. Both proton NMR and DLS studies demonstrated that block copolymers were temperature-sensitive, whereby the lower critical solution temperature (LCST) of polymers varied with the polymerization degrees of comonomers in the block copolymers. LCST was determined to be between ∼35 °C and 55 °C depending on the type and the comonomer compositions of the block copolymers. It was observed that an increase on the percentage of hydrophilic PMAGP block in block copolymer caused an increase on the LCST value as expected.     

利用x射线衍射法测定不同序列的聚苯乙烯-聚环氧乙烷嵌段共聚物的结晶度和晶粒大小

PSt-PEO嵌段共聚物,由于其PSt链段的亲油性及无定形性,PEO链段亲水性及结晶性所具有的两重性质^[1],使得它们在理论研究及实际应用上都具有较大的意义。但对其结晶度及晶粒大小的测定还不曾见报导。     

Synthesis and drug controlled release of block copolymers of poly(l-lactide) with poly(d,l-lactide) and related monomers

Four types of new biodegradable block copolymers AB, ABA, AC and AD, where A is poly(L-lactide) (PLLA), B is poly(D, L-lactide) (PDLLA), C is poly(p-dioxanone) (PDON) and D is poly(ϵ-caprolactone) (PCL) with different block lengths were synthesized and characterized by GPC, IR, ¹H-NMR and DSC. There are phase-separated and biodegradable block copolymers. Their in vitro biodegradation rates with the change of composition ratio were studied as well as the biodegradation rates of homopolymers with the series as PDON > PDLLA > PLLA in parallel with their crystallinities, i.e. from amorphous to semicrystalline. All these block copolymers were used as matrix to test their controlled release behavior of levo-norgestrel (LNG) in the form of microspheres through solvent evaporation preparation with thoroughly long-time washing to minimize the generally occurring bursting effect. As a result all of them showed almost constant rate of release even from the initial stage,     

ABA型两亲嵌段共聚物的合成及表征

以α ,α′ 二溴代二甲苯为引发剂 ,CuBr/2 ,2′ 联吡啶为催化体系 ,制备了双溴端基的分子量分布窄的聚苯乙烯 (MWD =1 18) .再以此作为大分子引发剂 ,实现了甲基丙烯酸对硝基苯酯的原子转移自由基聚合 ,制得了分子量可控且分子量分布窄的ABA型嵌段共聚物 ,再经水解、酸化 ,得到了聚甲基丙烯酸 b 聚苯乙烯 b 聚甲基丙烯酸ABA型两亲嵌段共聚物     

Synthesis of AB and ABA block copolymers as compatibilizers in nylon 6/polycarbonate blends

Nylon 6 (Ny6) and Bisphenol A polycarbonate (PC) are immiscible and form biphasic blends. To improve the compatibility of Ny6 and PC several ABA and AB Ny6/PC block copolymers were synthesized, and their compatibilizing behavior on the blends were tested. Block copolymers were prepared by reacting monoamino- or diamino-terminated Ny6 homopolymers with high molecular weight PC at 130°C in anhydrous DMSO. The reaction of diamino- and monoamino-terminated Ny6 with polycarbonate produces block copolymers of the type PC-Ny6-PC (ABA) and PC-Ny6 (AB), respectively, plus a certain amount of unconverted PC degradated to lower molecular weights. To separate the block copolymer from the unconverted PC, a selective fractionation with tetrahydrofuran (THF) and trifluoroethanol (TFE) was carried out. Three different fractions were obtained: THF-soluble fraction, TFE-soluble fraction, and the TFE-insoluble fraction. The scanning electron microscopy (SEM) analysis of a 75/25 (wt/wt) Ny6/PC blend added with 2% of ABA or AB block copolymers, showed the presence of smaller PC particles more adherent to the polyamide matrix, with respect to the same blend nonadded, which is clearly biphasic. The size of the PC particles decreases from ABA to AB compatibilized blends and the adhesion with the matrix is increases in the same way. © 1996 John Wiley & Sons, Inc.     

Transformation of “living” carbocationic and other polymerizations to controlled/“living” radical polymerization

Transformation of “living” carbocationic polymerization of styrene and isobutene to controlled atom transfer radical polymerization (ATRP) is described and formation of the corresponding AB and ABA block copolymers with styrene (St), methyl methacrylate (MMA, methyl acrylate (MA) and isobornyl acrylate (IBA) was demonstrated. A similar approach was applied to the cationic ring opening polymerization of tetrahydrofuran leading to the AB and ABA block copolymers with St, MMA and MA using ATRP. Site transformation approach was also used for the ring opening metathesis polymerization of norbornene and polycondensation systems using polysulfone as an example. In both cases, AB and ABA block copolymers were efficiently formed with styrene and acrylates.     

聚乙烯-聚二甲基硅氧烷两嵌段共聚物的合成及表征

用阴离子聚合方法合成了具有确定组成、确定分子量及窄分子量分布的聚丁二烯-聚二甲基硅氧烷两嵌段共聚物(PB-PDMS)。用对-甲苯磺酰肼氢化聚丁二烯段,得到聚乙烯-聚二甲基硅氧烷两嵌段共聚物(PE-PDMS)。¹H-NMR谱及IR光谱均表明加氢是完全的。示差扫描量热法(DSC)对PE-PDMS研究结果表明其结晶行为与共聚物的组成有关。     

Thermoresponsive gels based on ABA triblock copolymers: Does the asymmetry matter?

The aim of this study was to investigate the effect of the asymmetry of the triblock copolymers on their thermoresponsive self‐assembly behavior. To this end, nine ABA‐type triblock copolymers with n‐butyl methacrylate and 2‐(dimethylamino)ethyl methacrylate (DMAEMA) consisting of the A and the B blocks, respectively, were synthesized. Polymers of three different DMAEMA contents (50, 60, and 70 wt %) were synthesized while varying the length ratio of the two hydrophobic A blocks. Specifically, one symmetric ABA triblock copolymer and two asymmetric ABA′ triblock copolymers with the length of the second A block to be twice or four times bigger than the length of the first A block (AB2A and AB4A triblock copolymer) were synthesized for each DMAEMA composition. Three statistical copolymers were also synthesized for comparison. The thermoresponsive behavior of the copolymers was studied and it was found that the cloud point and rheological properties of the polymers were strongly affected by the architecture (statistical vs. block) and less strongly by the DMAEMA composition and the asymmetry of the polymers. Nevertheless, interestingly the asymmetry of the ABA triblock copolymers did influence the thermoresponsive behavior with the more symmetric polymers presenting a sol–gel transition at lower temperatures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2850–2859.