“Helix‐in‐Helix” Superstructure Formation through Encapsulation of Fullerene‐Bound Helical Peptides within a Helical Poly(methyl methacrylate) Cavity

A one‐handed 3₁₀‐helical hexapeptide is efficiently encapsulated within the helical cavity of st‐PMMA when a fullerene (C₆₀) derivative is introduced at the C‐terminal end of the peptide. The encapsulation is accompanied by induction of a preferred‐handed helical conformation in the st‐PMMA backbone with the same‐handedness as that of the hexapeptide to form a crystalline st‐PMMA/peptide‐C₆₀ inclusion complex with a unique optically active helix‐in‐helix structure. Although the st‐PMMA is unable to encapsulate the 3₁₀‐helical peptide without the terminal C₆₀ unit, the helical hollow space of the st‐PMMA is almost filled by the C₆₀‐bound peptides. This result suggests that the C₆₀ moiety can serve as a versatile molecular carrier of specific molecules and polymers in the helical cavity of the st‐PMMA for the formation of an inclusion complex, thus producing unique supramolecular soft materials that cannot be prepared by other methods.     

Conformational changes of poly(ethylene oxide) in poly(ethylene oxide)/poly(methyl methacrylate) blends by supercritical carbon dioxide

The effects of supercritical carbon dioxide (SC CO₂) fluids on the morphology and/or conformation of poly(ethylene oxide) (PEO) in PEO/poly(methyl methacrylate) (PMMA) blends were investigated by means of differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), and Fourier transform infrared (FTIR). According to DSC data for a given blend, the melting enthalpy and, therefore, degree of crystallinity of PEO were increased, whereas the melting temperature of PEO was decreased, with SC CO₂ treatment. The enhancement of PEO crystallization with SC CO₂ treatment, as demonstrated by DSC data, was supported by WAXD data. According to FTIR quantitative analyses, before SC CO₂ treatments, the conformation of PEO was transformed from helix to trans planar zigzag via blending with PMMA. This helix‐to‐trans transformation of PEO increased proportionally with increasing PMMA content, with around 0.7% helix‐to‐trans transformation per 1% PMMA incorporation into the blend. For a given blend upon SC CO₂ treatments, the conformation of PEO was transformed from trans to helix. This trans‐to‐helix transformation of PEO decreased with increasing PMMA contents in the blends because of the presence of interactions between the two polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2479–2489, 2004     

Stereospecific Cyclic Poly(methyl methacrylate) and Its Topology‐Guided Hierarchically Controlled Supramolecular Assemblies

In this study, the stereocomplexation between a novel stereospecific cyclic vinyl polymer, that is, cyclic syndiotactic poly(methyl methacrylate) (st‐PMMA), with the complementary linear isotactic (it‐) PMMA was investigated. Surprising new insight into the effects of the topology (i.e., end groups), size, and tacticity of the assembling components on stereocomplex formation was obtained. Characterization of the stereocomplexes revealed that the self‐assembly of cyclic st‐PMMAs and linear it‐PMMAs resulted in the formation of an unprecedented “polypseudorotaxane‐type” supramolecular assembly. This stereocomplex exhibited remarkably different physical properties as compared to the conventional PMMA triple‐helix stereocomplex as a result of the restricted topology imposed by the cyclic st‐PMMA assembling component.     

An unprecedented memory of macromolecular helicity induced in an achiral polyisocyanide in water

We have found an unprecedented memory of macromolecular helicity induced in an achiral sodium salt of poly(4-carboxyphenyl isocyanide) (poly-1-Na). Poly-1-Na folds into a one-handed helix through configurational isomerization around the C=N backbones by interactions with optically active amines in water. The helix remains when the optically active amines are completely removed, and further modifications of the side group to carboxy and esters can be possible without loss of the macromolecular helicity memory.     

Ordered structures of stereoregular poly(methyl meth-acrylates) in solutions studied by spectroscopic methods

Three groups of problems concerning ordered structures in solutions of stereoregular poly(methyl meth-acrylates) (PMMA) were studied by spectroscopic methods: (i) Self-aggregation of syndiotactic (s) PMMA in solution was followed by means of NMR and IR spectroscopy; it has been established that double helices are formed during the initial stage of aggregation, and activation and equilibrium thermodynamic parameters (ΔH, ΔS) which characterize the transition coil–double helix in s-PMMA were determined. (ii) NMR spectroscopy has demonstrated that association in solutions of atactic PMMA proceeds via interactions of stereocomplex type (interaction between m-diads and r-tetrads). (iii) It has been found that ¹³C CP/MAS NMR spectra of crystalline forms of PMMA (prepared from aggregated solutions by solvent evaporation) conform to the double-helix structure of these systems.     

Switching of the helical polymer conformation in a solid polymer film

A chiral photochromic polyisocyanate was incorporated into a solid polymer matrix of poly(methyl methacrylate) (PMMA), yielding an isotropic polymer film. Isomerization of the chiral photochromic azo side groups (cis‐trans) triggers a reversible conformational change of the helical polyisocyanate backbone. Thus the chirooptical properties of the film can be switched photochemically. The isomerization of the helix is much slower than the isomerization of the azo side groups. Below T_g , the photochemically modified helix conformation is thus stable, despite thermal relaxation of the azo chromophores.     

A combinatorial approach to study solvent-induced self-assembly of mixed poly(methyl methacrylate)/polystyrene brushes on planar silica substrates: effect of relative grafting density

This article reports the study of the effect of relative grafting densities of two polymer chains on solvent-induced self-assembly of mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes through a combinatorial approach. Gradient-mixed PMMA/PS brushes were synthesized from a gradient-mixed initiator-terminated monolayer by combining atom transfer radical polymerization (ATRP) and nitroxide mediated radical polymerization (NMRP) in a two-step process. The gradient-mixed initiator-terminated monolayer was fabricated by first formation of a gradient in density of an ATRP initiator through vapor diffusion followed by backfilling of an NMRP-initiator-terminated trichlorosilane. After treatment of a gradient-mixed brush whose PS Mn was slightly lower than that of PMMA with glacial acetic acid, a selective solvent for PMMA, relatively ordered nanodomains were observed in the region where the ratio of PS to PMMA grafting density (number of polymer chains/nm2) was in the range from 0.67 to 2.17 and the overall grafting density was approximately 0.85 polymer chains/nm2. Contact angle hysteresis were high (> or =40 degrees ) in this region and XPS studies confirmed that the PMMA chains were enriched at the outermost layer. The nanodomains are speculated to be of a micellar structure with PS chains forming the core shielded by PMMA chains.     

Solvent-induced switching of the macromolecular helicity of poly[(4-carboxyphenyl)acetylene] induced by a single chiral amino alcohol

Cis–transoidal poly[(4-carboxyphenyl)acetylene] (poly- 1 ) complexed with optically active amines and amino alcohols showed an induced circular dichroism (ICD) in the ultraviolet–visible region because of a predominantly one-handed helix formation in water and in dimethyl sulfoxide (DMSO). The Cotton effect signs of the poly- 1 /chiral amino alcohol complexes were inverted in the presence of water, whereas the ICD pattern of the poly- 1 /chiral amine complexes showed no change, regardless of the water content. These results demonstrated that the helix sense of poly- 1 induced by optically active amino alcohols through noncovalent acid–base interactions could be switched by changes in the solvent ratio in the DMSO–water mixtures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3625–3631, 2003     

Modeling reactive blending: An experimental approach

We present an experimental study of polymer–polymer reaction kinetics at the interfaces between two immiscible polymer phases under flow in a batch mixer of type Haake Rheocord. To that end, we have developed a model chemical system that is composed of a mixture of polystyrene (PS) and poly(methyl methacrylate) (PMMA). A small fraction of PS bear hydroxyl terminal group (PS-OH) and that of PMMA contain nonclassical isocyanate moieties that are randomly distributed along the PMMA chains (PMMA-r-NCO). This reactive system is particularly pertinent to modeling practical reactive blending processes because the amount and rate of copolymer formation can be determined with great accuracy (on the order of ppm). This study shows that the overall reaction rate is controlled primarily by interfacial generation through convective mixing. Most reaction and morphological development are accomplished within a very short period of time (1–3 min). For a PS/PMMA (60/40) reactive blend, the ultimate size of the PMMA particles is as small as 0.2 μm and is reached within 2 to 3 min. A surface coverage of about 0.5 of the PMMA particles by a monolayer of the copolymer is enough to prevent dynamic coalescence, whereas a much higher surface coverage is needed to eliminate static coalescence. In the nonentangled regime (M_n of the PS-OH = 7800 g/mol), temperature has a significant effect on the reaction rate, while it has little effect in the entangled regime (M_n of the PS-OH = 53,200 g/mol). © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2153–2163, 1998     

Gelation Dynamics and Mechanism(s) in Stereoregular Poly(Methyl Methacrylate)s

Chain conformation and gel structure of syndiotactic PMMA thermoreversible gels have been investigated using small angle neutron scattering (SANS). A double helix model for the chain conformation is proposed alongside a gel network model where the fibrils are formed by the proposed double helix and the junctions by the aggregation of 3 double helices. Preliminary results, also obtained by SANS, for stereocomplex gels prepared in bromobenzene are presented.     

旋光性聚{(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯}的合成与表征

设计、合成了一个带有横挂三联苯侧基的手性乙烯基单体——(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯,进行了普通自由基和原子转移自由基聚合反应.所得聚合物具有比单体低30°左右的比旋光度,且在侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明其主链可能形成了具有相反旋光方向的螺旋构象.在所研究范围内,聚合条件对聚合物的旋光度没有明显的影响.在分子量较小时,聚合物的比旋光度随着分子量的增加而降低,说明主链螺旋构象的贡献在增大,而当分子量达到一定值后,聚合物的比旋光度不再随分子量的增加而显著变化.     

A rational design for the directed helicity change of polyacetylene using dynamic rotaxane mobility by means of through-space chirality transfer

Directed helicity control of a polyacetylene dynamic helix was achieved by hybridization with a rotaxane skeleton placed on the side chain. Rotaxane-tethering phenylacetylene monomers were synthesized in good yields by the ester end-capping of pseudorotaxanes that consisted of optically active crown ethers and sec-ammonium salts with an ethynyl benzoic acid. The monomers were polymerized with [{RhCl(nbd)}(2)] (nbd=norbornadiene) to give the corresponding polyacetylenes in high yields. Polymers with optically active wheel components that are far from the main chain show no Cotton effect, thereby indicating the formation of racemic helices. Our proposal that N-acylative neutralization of the sec-ammonium moieties of the side-chain rotaxane moieties enables asymmetric induction of a one-handed helix as the wheel components approach the main chain is strongly supported by observation of the Cotton effect around the main-chain absorption region. A polyacetylene with a side-chain rotaxane that has a shorter axle component shows a Cotton effect despite the ammonium structure of the side-chain rotaxane moiety, thereby suggesting the importance of proximity between the wheel and the main chain for the formation of a one-handed helix. Through-space chirality induction in the present systems proved to be as powerful as through-bond chirality induction for formation of a one-handed helix, as demonstrated in an experiment using non-rotaxane-based polyacetylene that had an optically active binaphthyl group. The present protocol for controlling the helical structure of polyacetylene therefore provides the basis for the rational design of one-handed helical polyacetylenes.     

Interfacial behaviors of PMMA-PEO block copolymers at the air/water interface

Amphiphilic block copolymers are attracting con-siderable attention because they exhibit unique self- assembly properties in selective organic solvents[1―4]. Semicrystalline poly(ethylene oxide) (PEO), having many interesting physicochemical properties s…     

Surface modification of poly(methyl methacrylate) microfluidic devices for high-resolution separations of single-stranded DNA

While polymer-based microfluidic devices offer some unique opportunities in developing low-cost systems for a variety of application areas, the ability to sort electrophoretically with high efficiency a number of different targets has remained somewhat elusive with an example consisting of achieving single base resolution as required for DNA sequencing. While the reasons for this are many-fold, it is clear that some type of coating is required on the polymer substrate to suppress the EOF and/or minimize potential solute/wall interactions. To this end, we report on a simple grafting procedure to allow the formation of polymer coats, which in this example used linear polyarcylamides (LPAs), onto a poly(methyl methacrylate) (PMMA) microfluidic device. The procedure involved creating an amine-terminated PMMA surface by appropriately functionalizing the PMMA through either a chemical or photochemical process. The aminated surface could then be used to covalently anchor methacrylic acid, which was used as a scaffold to produce LPAs on the surface through radical polymerization of acrylamide. The resulting surfaces demonstrated EOFs that were nearly an order of magnitude smaller than native PMMA. In addition, these LPA-coated devices could produce highly reproducible migration times of over approximately 20 runs with plate numbers exceeding 10(5) m(-1). Using gel electrophoretic analysis of a single base track generated from an M13mp18 template using Sanger cycle sequencing and dye-primer chemistry, the resolution value obtained for bases 199 and 200 was 0.18 while for bases 208 and 209 it was 0.21. For the native PMMA, these bands were found to comigrate.     

Ordered structures of syndiotactic poly(methyl methacrylates) studied by a combination of infrared,Raman, and NMR spectroscopy.

The C ? O stretching vibrations in Raman and infrared spectra of poly(methyl methacrylate) (PMMA) samples of various stereoregularity in solutions and in the solid state were measured. It was found that for ordered structures of syndiotactic (s) PMMA, transition dipole coupling of ester groups in ordered s-PMMA sequences leads to a splitting of the C ? O stretching vibration into three components with wavenumbers equal in the solid state and in solution, and of different activity in Raman and infrared spectra. A comparison of the time dependences of self-aggregation of s-PMMA as measured by NMR and infrared spectroscopy indicates that the first phase of the aggregation process is detected by both methods. NMR analysis of the effect of the degree of stereoregularity on the self-aggregation of s-PMMA shows that the prerequisite for the generation of a stable ordered structure is the mutual interaction of two s-sequences of a minimum length of 9 monomer units. The experimental data obtained lead to the conclusion that, in self-aggregated s-PMMA, some of the ester groups are in close contact, with the interacting s-sequences probably forming a double helix.     

Thermal degradation processes of poly(carbonate) and poly(methyl methacrylate) in blends coalesced either from their common inclusion compound formed with γ-cyclodextrin or precipitated from their common solution

Direct insertion probe pyrolysis mass spectrometry (DIP-MS) analyses of a PC/PMMA blend, coalesced from their common inclusion compound (ICs) formed with host γ-cyclodextrin (γ-CD) through removal of the γ-CD host, and a physical PC/PMMA blend, precipitated from their common solution, have been performed and compared with those of the coalesced and as-received homopolymers. A slight increase in the thermal stability of the PMMA component in the presence of PC was recorded both by TGA and DIP-MS compared to the corresponding homopolymers. The DIP-MS observations pointed out that the thermal stability and degradation products of these polymers are affected once they are included inside the IC channels created by the stacked host CDs. DIP-MS observations suggested that for both coalesced and physical PC/PMMA blends, an exchange reaction occurs between carbonates of PC and MMA, formed by depolymerization of PMMA above 300 °C, most likely due to diffusion of MMA monomer at the interface or even into the PC domains, where it can react producing low molecular weight PC bearing methyl carbonate and methacrylate chain ends. The results also indicated an ester-ester interchange reaction between PC and PMMA yielding a graft copolymer and low molecular weight PC chains bearing methyl carbonate end groups in the case of the coalesced blend. This can be atttributed to the presence of specific molecular interactions between the intimately mixed PMMA and PC chains in the coalesced PC/PMMA blend.     

Rheological,mechanical and morphological properties of thermoplastic vulcanizates based on NR‐g‐PMMA/PMMA blends

Graft copolymer of natural rubber and poly(methyl methacrylate) (NR‐g‐PMMA) was prepared using semi‐batch emulsion polymerization technique via bipolar redox initiation system. It was found that the grafted PMMA increased with the increase of methyl methacrylate (MMA) concentration used in the graft copolymerization. The NR‐g‐PMMA was later used to prepare thermoplastic vulcanizates (TPVs) by blending with PMMA through dynamic vulcanization technique. Conventional vulcanization (CV) and efficient sulphur vulcanization (EV) systems were studied. It was found that the CV system provided polymer melt with lower shear stress and viscosity at a given shear rate. This causes ease of processability of the TPVs via extrusion and injection molding processes. Furthermore, the TPVs with the CV system showed higher ultimate tensile strength and elongation. The results correspond to the morphological properties of the TPVs. That is, finer dispersion of the small vulcanized rubber particles were observed in the PMMA matrix. Various blend ratios of the NR‐g‐PMMA/PMMA blends using various types of NR‐g‐PMMA (i.e. prepared using various percentage molar ratios of NR and MMA) were later studied via dynamic vulcanization by a conventional sulphur vulcanization system. It was found that increasing the level of PMMA caused increasing trend of the tensile strength and hardness properties but decreasing level of elongation properties. Increasing level of the grafted PMMA in NR molecules showed the same trend of mechanical properties as in the case of increasing concentration of PMMA used as a blend component. From morphological studies, two phase morphologies were observed with a continuous PMMA phase and dispersed elastomeric phase. It was also found that more finely dispersed elastomeric phase was obtained with increasing the grafted PMMA in the NR molecules. Copyright © 2005 John Wiley & Sons, Ltd.     

Computational analysis of non-covalent polymer-protein interactions governing antibody orientation

The ALYGNSA is an affinity-based antibody orientation system produced through the interaction of the polymer poly(methyl methacrylate) (PMMA) and recombinant protein G (rProG), a streptococcal protein. This improved orientation suggests a specific non-covalent attachment of the rProG to PMMA that leaves the IgG binding region of the rProG more readily available. In this study, a full tertiary structure model of the rProG molecule of 198 amino acid residues containing a signal region, two IgG binding domains, and an anchor region, was computationally generated using the iterative threading assembly refinement (I-Tasser) server. The rProG model having the highest confidence score was subject to docking experiments with varied-length short chains of PMMA polymer via the graphic processing units-based Hex server. A five-residue section of the rProG anchor region, with the sequence TPATP, was identified as a potential interaction site. A complete ternary model (rProG, PMMA, and IgG) was assembled and provides insight into a plausible mechanism for non-covalent antibody orientation by the ALYGNSA system.     

CHANGES IN TRANSMISSION CHARACTERISTICS OF POLYMETHYLMETHACRYLATE AND CELLULOSE (III) ACETATE DURING EXPOSURE TO ULTRAVIOLET LIGHT

Abstract— Ultraviolet-transparent polymethylmethacrylate (PMMA) and cellulose (III) acetate (CA) (often used as a cut-off filter in UVB [280–320 nm] biological effect studies) were exposed to a 20 W Philips TL 12 lamp to examine changes in transmission characteristics due to UVB exposure. Transmission of UVB and biologically weighted UVB (UV_BE(DNA)) through PMMA were similar, 88.3 and 83.5%, respectively. The absorption characteristics of PMMA did not change with time at any of the UV irradiance levels applied. However, transmission of UVB and UVB_BE(DNA)) through new CA differed considerably: 59% versus only 11%, respectively. Also, spectral absorption characteristics changed with time due to degradation of CA, at a rate that was dependent on the incident UVB irradiance. The decrease in transmission through CA of both UVB and UV_BE(DNA) can be described by exponential functions. The CA that was wrapped around the UV lamp showed dramatic changes in UV absorption over the first few hours of use. However, when CA was placed at a longer distance from the light source initial degradation was less. It is concluded that PMMA can be applied in UV effect studies as a reasonable alternative for quartz. The CA should, however, be used with care, because the large transmission decreases that were observed strongly hamper an accurate calculation of (biologically weighted) UVB dose rates.     

Thermal‐initiating potentialities of poly(methyl methacrylate) peroxide: Metamorphosis of block‐into‐block copolymer and comparative studies on surface texture and morphology

This is the first report concerning the use of vinyl polyperoxide, namely, poly(methyl methacrylate) peroxide (PMMAP), as a thermal initiator for the synthesis of active polymer PMMAP‐PS‐PMMAP by free‐radical polymerization with styrene. The polymerizations have been carried out at different concentrations of macroinitiator PMMAP. The active polymers have been characterized by ¹H NMR, DSC, thermogravimetric analysis, and gel permeation chromatography. PMMAP‐PS‐PMMAP is further used as the thermal macroinitiator for the preparation of another block copolymer, PMMA‐b‐PS‐b‐PMMA, by reacting the active polymers with methyl methacrylate. The block copolymers have been synthesized by varying the concentrations of the active polymers. The mechanism of block copolymers has been discussed, which is also supported by thermochemical calculations. Studies on the surface texture and morphology of the block copolymer of polystyrene (PS) and PMMA material have been carried out using scanning electron microscopy. Furthermore, in this article, a blend of the same constituent materials (PS and PMMA) in proportions (v/v) similar to that contained in block copolymers has been formulated, and the morphology and surface textures of these materials were also investigated. A comparative microscopical evaluation between two processing methods was done for a better understanding of the processing route dependence of the microstructures. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 546–554, 2001