Unequivocal determination of metal atom oxidation state in naked heme proteins: Fe(III)myoglobin, Fe(III)cytochrome c, Fe(III)cytochrome b5, and Fe(III)cytochrome b5 L47R

Unambiguous determination of metal atom oxidation state in an intact metalloprotein is achieved by matching experimental (electrospray ionization 9.4 tesla Fourier transform ion cyclotron resonance) and theoretical isotopic abundance mass distributions for one or more holoprotein charge states. The ion atom oxidation state is determined unequivocally as Fe(III) for each of four gas-phase unhydrated heme proteins electrosprayed from H2O: myoglobin, cytochrome c, cytochrome b5, and cytochrome b5 L47R (i.e., the solution-phase oxidation state is conserved following electrospray to produce gas-phase ions). However, the same Fe(III) oxidation state in all four heme proteins is observed after prior reduction by sodium dithionite to produce Fe(II) heme proteins in solution: thus proving that oxygen was present during the electrospray process. Those results bear directly on the issue of similarity (or lack thereof) of solution-phase and gas-phase protein conformations. Finally, infrared multiphoton irradiation of the gas-phase Fe(III)holoproteins releases Fe(III)heme from each of the noncovalently bound Fe(III)heme proteins (myoglobin, cytochrome b5 and cytochrome b5 L47R), but yields Fe(II)heme from the covalently bound heme in cytochrome c.     

A new efficient adsorbent in the preconcentration studies of the Cr(III) and Fe(III) ions

In this study, the imine‐graphene hybrid material (HM) was used as an adsorbent for removal of Fe(III) and Cr(III) metal ions from the drinking waters. The adsorbent material (HM) was prepared at three steps. At the first step, the graphite was oxidized by Hummer's method for preparation of graphene oxide (GO), in the second step, the silanization derivative (GO‐APTES) was obtained from the reaction of the 3‐(trimethoxysilyl) propylamine and GO. In the final step, the hybrid material (HM) was synthesized from the reaction of the 3,5‐diiodosalicylaldehyde and GO‐APTES. The chemical structures of three materials GO, GO‐APTES and HB were characterized by using the FT‐IR, XRD, EDX, SEM, TEM and UV‐vis methods. Thermal properties of the materials GO, GO‐APTES and HB were investigated by TGA/DTA methods in the 25–1000°C temperature range. Adsorption and desorption studies of the hybrid material toward Fe(III) and Cr(III) metal ions were investigated using the Batch method. The effect of pH, contact time, temperature, concentration on the adsorption properties of the hybrid material were investigated by ICP‐OES. The Fe(III) and Cr(III) ions have the maximum adsorption at the pH 7. The adsorption capacity decreases with the increase in pH values because above pH 9 the adsorption decreases due to the precipitation of metal hydroxide.     

Phosphoprotein electrophoresis in the presence of Fe(III) ions

Preparation of affinity polyacrylamide gels containing immobilized Fe(III) ions for the separation of proteins exhibiting metal ion binding properties is described. The presented method enables uniform distribution of immobilized metal ions in the affinity part of the polyacrylamide separating gel. Affinity gels prepared by this way are suitable to follow the effect of different concentrations of metal ions immobilized in polyacrylamide gel on a protein electrophoretic behavior. Polyacrylamide gels containing immobilized Fe(III) ions were used to study the electrophoretic behavior of two model proteins differing in their phosphate group content: chicken ovalbumin and bovine α‐casein. For the electrophoretic separation, both the native and the denaturating conditions were used.     

Fe(III)Fe(III) and Fe(II)Fe(III) Complexes as Synthetic Analogues for the Oxidized and Reduced Forms of Purple Acid Phosphatases

Novel Fe(III)Fe(III) and Fe(II)Fe(III) complexes [Fe(2)(BBPMP)(&mgr;-OAc)(&mgr;-X)](n)() (1, X = OAc(-), n = 1+; 2, X = OH(-), n = 1+; 3, X = OAc(-), n = 0; 4, X = OH(-), n = 0), where BBPMP(3)(-) is the anion of 2,6-bis[(2-hydroxybenzyl)(2-pyridylmethyl)aminomethyl]-4-methylphenol, and OAc(-) is acetate, were prepared in order to provide models for the active site of purple acid phosphatases (PAPs). Complex 1 was obtained by the reaction of H(3)BBPMP with Fe(ClO(4))(2).6H(2)O in methanol and sodium acetate trihydrate under ambient conditions, while complex 3 was synthesized as described for 1, under an argon atmosphere with low levels of dioxygen. 2 was isolated from 1in acetonitrile by a substitution of the bridging acetate group by hydroxide, while 4 was generated in solution during a spectropotentiostatic experiment on 2, under argon. Complex 1, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(2)]ClO(4).H(2)O, has been characterized by X-ray crystallography. Crystal data: monoclinic, space group P2(1)/n, a = 14.863(5) ?, b = 12.315(3) ?, c = 20.872(8) ?, beta = 90.83(3) degrees, Z = 4. IR, M?ssbauer, magnetic, electronic absorption, and electrochemical properties of 1-3 have been investigated, and some of these properties represent a contribution to the understanding of the dinuclear iron center of PAPs. Complexes 2, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(&mgr;-OH)]ClO(4) (lambda(max) = 568 nm/epsilon = 4760 M(-)(1) cm(-)(1)), and 4 [Fe(II)Fe(III)(BBPMP)(&mgr;-OAc)(&mgr;-OH)] (lambda(max) = 516 nm/epsilon = 4560 M(-)(1) cm(-)(1)), constitute good synthetic analogues for the chromophoric site for the oxidized and reduced forms, respectively, of the enzyme.     

Mass spectra of partially fluorinated β-diketonato complexes of Al(III), Cr(III), Fe(III) and Co(III)

The mass spectra of the Al(III), Cr(III), Fe(III) and Co(III) complexes of the anions of hexafluoroacetylacetone (hfac) trifluoroacetylacetone (ttac), benzoyltrifluoroacetone (btac) and thenoyltrifluoroacetone (ttac) have been determined and are discussed here. Emphasis is placed on discerning which of the observed reactions may properly be attributed to the influence of the metal in the complex and those which may be thought of as arising from the nature of the ligand. The most important influence of the coordinated metal is related to its ability to be reduced²; however, the presence of the metal serves to prohibit or facilitate certain rearrangement reactions relative to the free protonated ligand. Since essentially all fragmentation occurs within or by loss of a ligand, the nature of the ligand determines the nature of the observed fragments. Where intramolecular com-petition of fragment types is possible (tfac, btac and ttac complexes), the most probable fragment of a given class, odd electron or even electron, is easily determined. The most commonly eliminated fragments are CF₃and CF₂. Certain metastable peaks are associated with consecutive decomposition in the field free region. Such a phenomenon appears to be common for molecules of the type studied here.     

Luminescence and triplet—triplet absorption spectra of rhodium (III) porphyrins

Photophysical studies of four rhodium(III) porphyrins [RhTPPS (H₂O)₃^3?, RhTPP (Cl) (L), RhOEP (Cl) (L) and RhMesoPMEI(CI) (L)] show that these porphyrins are characterised by a moderate phosphorescence (φ ? 10^?2) and a very weak fluorescence (φ ? 5 × 10^?4) in solution at room temperature. TPP derivatives also have moderately intense triplet—triplet absorption extending to 900 nm.     

A new phenanthrene-based bis-oxime chemosensor for Fe(III) and Cr(III) discrimination

The synthesis of two new 2,7-disubstituted phenanthrene-based bis oximes is described. The ability of these two compound for complexing heavy metal cations have been studied and complexation constants and complex stoichiometry for Cr³⁺ and Fe³⁺ complex have been determined. The fluorescent properties of ligand 2 make this compound able to act as a sensor able to discriminate between Cr³⁺ and Fe³⁺. Detection limits for these two cations have been evaluated.     

4f-4f absorption spectra of nine-coordinate Pr (III) and Nd (III) complexes in different environments

Absorption spectroscopic studies on the mixed-ligand complexes of Pr (III) and Nd (III) with 2,2'-bipyridyl and thiocyanate in pyridine, DMSO, DMF and methanol are presented. The oscillator strengths for the hypersensitive and non-hypersensitive transitions have been calculated and variation in the oscillator strength and band shapes with respect to solvent type is rationalized in terms of solvent structures and coordinating properties. A comparison is made with 1,10-phenanthroline complexes and has been shown that bpy is a weaker ligand than phen for these ions. Pyridine has been found most effective in promoting 4f-4f intensity and the increase in the oscillator strength in this solvent is due to dynamic ligand polarization mechanism.     

Magnetic anisotropy of a cyclic octanuclear Fe(III) cluster and magneto-structural correlations in molecular ferric wheels

The magnetic anisotropy of the cyclic octanuclear Fe(III) cluster [Cs subsetFe(8)[N(CH(2)CH(2)O)(3)](8)]Cl was investigated. Based on a spin Hamiltonian formalism and the consequent use of all symmetries, the magnetic anisotropy could be calculated exactly to first order, i.e., in the strong exchange limit. Experimentally, the magnetic anisotropy was investigated by magnetic susceptibility and high-field torque magnetometry of single crystals. The field and angle dependence of the torque at 1.7 K could be accurately reproduced by the calculations with one single parameter set, providing accurate results for the coupling constant and single-ion zero-field-splitting. These magnetic parameters are compared to those of several related hexanuclear ferric wheels and are discussed with respect to magneto-structural correlations for both coupling constant and single-ion anisotropy.     

Optimization of adsorption parameters for Fe (III) ions removal from aqueous solutions by transition metal oxide nanocomposite

Manganese oxide nanocomposite (Mn₂O₃/Mn₃O₄) was prepared by sol-gel technique and used as an adsorbent. Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and Field Emission Scanning Electron Microscopy (FE-SEM) were used to characterize the adsorbent. The response surface methodology (RSM) was employed to evaluate the effects of solution pH, initial Fe (III) ions concentration, adsorbent weight, and contact time on the removal ratio of the Fe (III) ions. A total of 27 adsorption experimental runs were carried out employing the detailed conditions designed based on the Box-Behnken design (BBD). Results showed that the pH of the solution and initial Fe (III) ions concentration were the most significant parameters for Fe (III) ions removal. In process optimization, the maximal value of the removal ratio of Fe (III) was achieved as 95.80%. Moreover, the corresponding optimal parameters of adsorption process were as: contact time?=?62.5?min, initial Fe (III) concentration?=?50?mg/L, adsorbent weight?=?0.5?g, and pH?=?5. The experimental confirmation tests showed a strong correlation between the predicted and experimental responses (R²?=?0.9803). The fitness of equilibrium data to common isotherm equations such as Langmuir, Freundlich, and Temkin were also tested. The sorption isotherm of adsorbent was best described by the Langmuir model. The kinetic data were analyzed using pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich kinetic models. The adsorption kinetics of Fe (III) ions were well fitted with the pseudo-second-order kinetic model.     

Sorption of lanthanum(III), cobalt(II) and iodide ions at trace concentrations on ferric hydroxide

Summary The sorption of lanthanum(III), cobalt(II) and iodide traces was studied in dependence on the solid-liquid contact time, pH value and the properties of the carrier (internally or externally formed). The ferric hydroxide carrier was prepared by mixing aqueous ferric chloride and ammonia solutions. The results are discussed in regard to colloidal properties of the ferric hydroxide and mechanisms of sorption.

---

Zusammenfassung Die Abhängigkeit der Sorption von Lanthan(III)-, Kobalt(II)- und Jodidspuren von der Berührungsdauer zwischen fester und flüssiger Phase, vom pH-Wert und von den kolloidalen Eigenschaften des Trägers (abgesondert, oder direkt im Sorptionssystem vorbereitet) wurde untersucht. Der Eisen(III)-hydroxidträger wurde durch Mischen wässriger Eisen(III)chlorid- und Ammoniaklösung gewonnen.Die Ergebnisse wurden im Hinblick auf die kolloidalen Eigenschaften des Eisen(III)hydroxids und den Sorptionsvorgang diskutiert.

     

4f-4f absorption spectra and hypersensitivity in nine-coordinate Ho(III) and Er(III) complexes in different environments

The effect of change in the environment upon 4f-4f absorption spectra of nine-coordinate Ho(III) and Er(III) complexes with thiocyanate and 2,2'-bipyridyl in methanol, DMSO, DMF and pyridine have been investigated. The oscillator strength for hypersensitive and non-hypersensitive transitions have been calculated and variation in the intensity and band shape with respect to solvent type is rationalized in terms of solvent structure and coordinating properties. A comparison with 1,10-phenanthroline complexes is investigated and has been found that phen has a larger impact on the transition intensities for these ions. Pyridine has been found most effective in promoting 4f-4f intensity. The results indicate that it is important to consider both the static and dynamic coupling mechanism while analysing the oscillator strength of hypersensitive transition.     

A terpyridyl-imidazole (tpy-HImzPh3) based bifunctional receptor for multichannel detection of Fe2+ and F- ions

The X-ray crystal structures of the tridentate ligand, 4'-[4-(4,5-diphenyl-1H-imidazol-2-yl)-phenyl]-[2,2':6',2']terpyridine (tpy-HImzPh(3)) and its bis-homoleptic iron(ii) complex of composition [Fe(tpy-HImzPh(3))(2)](2+) have been determined, showing that the ligand crystallized in a monoclinic form with the space group P2(1)/c while its Fe(II) complex crystallizes in an orthorhombic form with space group Fddd. Both the anion and cation binding properties of the receptor were thoroughly investigated in dimethylformamide-acetonitrile (1?:?9) solution using absorption, emission, and (1)H NMR spectral studies which revealed that the receptor acts as a sensor for both F(-) and Fe(2+). In the presence of excess F(-) ion, deprotonation of the imidazole N-H fragment of the receptor occurs, an event which is signaled by the development of a yellow color visible with the naked eye. The estimated value of the equilibrium constant of the receptor with F(-) is 1.9 × 10(4) M(-1). Deprotonation is also observed in the presence of hydroxide. The receptor also shows colorimetric and fluorimetric sensing ability towards Fe(2+) ions. The binding site for the metal ion in the system has been unambiguously established by single-crystal X-ray diffraction studies of the Fe(II) complex of the receptor. The influence of solvents on the absorption and fluorescence spectra of the receptor has been investigated in detail. Cyclic voltammetric (CV) and square wave voltammetric (SWV) measurements carried out in dimethylformamide-acetonitrile (2?:?3) provided evidence in favor of cation (Fe(2+)) and anion (F(-)) concentration dependent electrochemical responses, enabling the ligand to act as a suitable electrochemical sensor for F(-) and Fe(2+) ions.     

Synthesis,structural investigations and antimicrobial studies of hydrazone based ternary complexes with Cr(III), Fe(III) and La(III) ions

A novel series of three trivalent mononuclear ternary complexes of the type, [ML₁L₂] [M = Cr(III), Fe(III) and La(III), HL₁ = 2-((2-(2,4-dinitrophenyl)hydrazone)methyl)phenol, HL₂ = 2-aminophenol] was investigated by various physio-chemical studies. To obtain additional information inside the structure, density functional theory calculation was also carried out. The synthesized complexes showed remarkable antimicrobial activity when tested against A. niger, A. flavus, R. stolonifer, C. albicans, E. coli and Klebsiella sp. microbes. Furthermore, the molecular docking analysis was also carried out to analyze the interactions in protein–ligand complexes. Moreover, the quantitative structure–activity relationship was also investigated to study the biological activity of the ligand.     

Electronic absorption spectra and energy gap studies of Er3+ ions in different chlorophosphate glasses

Spectroscopic properties of Er3+ ions in different chlorophosphate glasses 50P2O5-30Na2HPO4-19.8RCl (R = Li, Na, K, Ca and Pb) are studied. The direct and indirect optical band gaps (Eopt) and the various spectroscopic parameters (E1, E2, E3, and zeta4f and alpha) are reported. The oscillator strengths of the transitions in the absorption spectrum are parameterized in terms of three Judd-Ofelt intensity parameters (omega2, omega4 and omega6). These intensity parameters are used to predict the transition probabilities (A), radiative lifetimes (tauR), branching ratios (beta) and integrated cross sections (sigma) for stimulated emission. Attention has been paid to the trend of the intensity parameters over hypersensitive transitions and optical band gaps. The lifetimes and branching ratios of certain transitions are compared with other glass matrices.     

Substitution of Fe(III) for Ga(III) in calcium gallate glass confirmed from the Debye temperature

A Debye temperature θ_D of 378 (±5K) has been obtained by applying a simplified Debye model to the⁵⁷Fe Mössbauer spectra of 60CaO·39Ga₂O₃·⁵⁷Fe₂O₃ glass. The θ_D value is comparable to those (280–580 K) obtained so far in several oxide glasses, glass-ceramics, and ceramics in which Mössbauer atoms are covalently bonded to oxygen atoms and play a role of network former. It proves that Fe(III) atoms occupy the substitutional sites of Ga(III) constituting distorted GaO₄ tetrahedra.