1-氨基-1-肼基-2,2-二硝基乙烯(AHDNE)的合成、 晶体结构和理论计算

利用1,1-二氨基-2,2-二硝基乙烯(FOX-7)和水合肼在水体系中合成了1-氨基-1-肼基-2,2-二硝基乙烯(AHDNE), 并在甲醇溶液中培养出可用于X射线衍射的单晶. 晶体属正交晶系, 空间群为Pnma, 晶胞参数为: a＝0.6283(4) nm, b＝0.7713(5) nm, c＝1.2280(8) nm, a＝b＝g＝90°, V＝0.5950(7) nm3, Dc＝1.821 g/cm3, μ＝0.171 mm－1, F(000)＝336, Z＝4, R1＝0.0489, wR2＝0.1456. 选取标题化合物的一个结构单元作为初始模型, 运用Gaussian 03程序, 在6-311＋G(d)的基组水平上, 用HF, MP2以及B3LYP三种计算方法对标题化合物进行了几何全优化, 并对其成键情况及自然键轨道(NBO)进行了分析.     

1-Amino-1-hydroxyamino-2,2-dinitroethene: novel insights in chemistry of FOX-7

1. Download high-res image (68KB)
2. Download full-size image

     

EDC-mediated condensations of 1-chloro-5-hydrazino-9,10-anthracenedione, 1-hydrazino-9,10-anthracenedione, and the corresponding anthrapyrazoles

The EDC-mediated condensation of 1-chloro-5-hydrazino-9,10-anthracenedione afforded an N-1 acyl anthrapyrazole instead of the expected hydrazide. The regiochemistry of the N-acyl substituent was assigned on the basis of an extensive set of NMR experiments, and identification of this isomer suggests a reaction sequence based on initial acylation and subsequent cyclization. In contrast, the parallel reaction of 1-hydrazino-9,10-anthracenedione proceeded to afford the expected hydrazide.     

Two interesting derivatives of 1-amino-1-hydrazino-2,2-dinitroethylene (AHDNE): synthesis and thermal properties

Journal of Thermal Analysis and Calorimetry - Two new interesting compounds, ethanedial-1,2-bis-(2-(1-amino-2,2-dinitroethenyl))hydrazone (EDNH) and 3-dinitromethyl-1,2,4-triazine (DNTA), were...     

FOX-7 (1,1-diamino-2,2-dinitroethene): trapped by copper and amines

Syntheses of the first Cu(NH(3))(2)(FOX)(2) and various Cu(amine)(2)(FOX)(2) (methyl, propyl, and dimethyl amine) complexes were achieved by using metathetical reactions which add a new chapter to the metal chemistry of FOX-7 (1,1-diamino-2,2-dintroethene). The crystal structures of Cu(NH(3))(2)(FOX)(2) and Cu(C(3)H(7)NH(2))(2)(FOX)(2) which show square planar geometry at copper aid in the understanding of the bonding modes in FOX-7 copper complexes which is supported by natural bond orbital (NBO) calculations. Water-free K-FOX was also structured.     

Preparation,X-ray crystallography,and thermolysis of phenylenediammonium dibromide salts

Phenylenediammonium dibromide (PDADBr) salts have been prepared and characterized by X-ray crystallography. The thermal decomposition of PDADBr has been studied by thermogravimetry (TG) and differential thermal analysis (DTA). Kinetic parameters have been evaluated using model fitting and isoconversional methods. The thermolytic pathways have also been suggested which involve proton transfer as a primary step to regenerate parent amine and HBr. Interaction between amine and HBr at higher temperature yields gaseous products.     

Preparation, crystal structure, and thermolysis of phenylenediammonium diperchlorate salts

Three salts of phenylenediammonium diperchlorate have been prepared and characterized by X-ray crystallography. Their thermal decomposition has been studied by thermogravimetry (TG), differential thermal analysis (DTA), and explosion delay (DE) measurements. The kinetics of thermal decomposition was evaluated by model fitting and isoconversional methods using TG data. The oxidation-reduction reactions near the surface of thermolysing perchlorates may be responsible for the decomposition followed by explosion. The possible pathways of thermolysis have also been proposed.     

Structural Characterization and Thermal Properties of 1-Amino-1-ethylamino-2,2-dinitroethylene

1-amino-1-ethylamino-2,2-dinitroethylene (AEFOX-7) was synthesized by the reaction of 1,1-diamino-2,2-dinitroethylene (FOX-7) and ethylamine aqueous solution at 92 oC. The the-oretical investigation on AEFOX-7 was carried out by B3LYP/6-311++G^**method. The IR frequencies and NMR chemical shifts were performed and compared with the experi-mental results. The thermal behavior of AEFOX-7 was studied with differential scanning calorimetry and thermal gravity-derivative thermogravimetry methods, and can be divided into a melting process and an exothermic decomposition process. The enthalpy, apparent activation energy and pre-exponential factor of the exothermic decomposition reaction were obtained as 374.88 kJ/mol, 169.7 kJ/mol, and 10^19.24 s^-1, respectively. The critical temper-ature of thermal explosion of AEFOX-7 is 145.2 oC. The specific heat capacity of AEFOX-7 was determined with micro-DSC method and theoretical calculation method, and the molar heat capacity is 214.50 J/(mol K) at 298.15 K. The adiabatic time-to-explosion of AEFOX-7 was calculated to be a certain value between 1.38-1.40 s. The thermal stability of AEFOX-7 is much lower than that of FOX-7.     

Phosphinoselenothioic acids and their salts: synthesis, characterization, and reaction with electrophiles

[reaction: see text] Phosphinoselenothioic acid ammonium salts were synthesized in good yields by reacting phosphinoselenothioic acid S-[2-(trimethylsilyl)ethyl] esters with ammonium fluorides. Phosphinoselenothioic acid alkali metal salts were obtained as 18-crown-6 ether complexes with high efficiency by treating the esters with alkali metal fluorides and 18-crown-6 ether. The salts were stable under air and soluble in water. The structures of the phosphinoselenothioic acid tetramethylammonium salt and P-methylseleno-P-methylthiophosphonium triflate were determined by X-ray molecular structure analyses. These salts exhibited monomeric structures, and the central phosphorus atoms adopted tetrahedral structures. Alkylation of the ammonium salts selectively gave phosphinoselenothioic acid Se-alkyl esters, whereas acylation of the salts preferentially gave S-acyl products. Protonation of the salts selectively gave the phosphinoselenothioic S-acid. The S-acid generated in situ was reacted with alpha,beta-unsaturated carbonyl compounds and cyclohexene oxide to give the adducts. Molecular orbital calculations were carried out for the model compound H2P(Se)S- to elucidate the electronic structure.     

Structural Characterization and Thermal Behavior of 1-Amino-1-methylamino-2,2-dinitroethylene

A novel high energetic material, 1‐amino‐1‐methylamino‐2,2‐dinitroethylene (AMFOX‐7), was synthesized through 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) reacting with methylamine in N‐methyl pyrrolidone (NMP) at 80.0°C, and its structure was determined by single crystal X‐ray diffraction. The crystal is monoclinic, space group P2₁/m with crystal parameters of a=6.361(3) Å, b=7.462(4) Å, c=6.788(3) Å, β=107.367(9)°, V=307.5(3) ų, Z=2, µ=0.160 mm^?1, F(000)=168, D_c=1.751 g·cm^?3, R₁=0.0463 and wR₂=0.1102. Thermal decomposition of AMFOX‐7 was studied, and the enthalpy, apparent activation energy and pre‐exponential constant of the exothermic decomposition reaction are 303.0 kJ·mol^?1, 230.7 kJ·mol^?1 and 10^21.03 s^?1, respectively. The critical temperature of thermal explosion is 245.3°C. AMFOX‐7 has higher thermal stability than FOX‐7.     

Tellurium azamacrocycles: synthesis, characterization and coordination studies

The metal-free condensation of bis(2-formylphenyl) telluride (1) with a series of diamines affords macrocyclic tellurium ligands 2-7. Crystals of the protonated macrocycle 8 are monoclinic, space group P2/n with a=10.890(5), b=7.414(4), c=24.334(13) Å, Z=2. The reaction of tellurium containing macrocyclic Schiff base 2 with Pd(C₆H₅CN)₂Cl₂ gives the expected 1:1 product [Pd(II) 2] Cl₂ (9). Complex 9 was treated with excess of NH₄PF₆ in methanol to give the analogous PF₆⁻ salt [Pd(II) 2] (PF₆)₂ (10). The crystals of 10 are monoclinic, space group P2₁/n, a=8.2250(10), b=21.280 (4), c=21.150 (4), Z=4. However, the reaction of 2 with Pt(COD)Cl₂ proceeds via novel transmetallation to yield an organoplatinum complex (11). The crystals of 11 are also monoclinic, space group P2₁/n, a=12.3253 (14), b=14.6557 (14), C=13.4054 (11), Z=4. The octahedral Ni(II) complex 12 was prepared by the reaction of NiCl₂ · 6H₂O with 2 and NH₄PF₆ under an inert atmosphere. For 12: triclinic, space group ; Z=2; a=10.800(8), b=13.468(9), c=13.918(11), α=89.67(6)°, β=101.53(7)°, γ=81.49(3)° and V=1961(3). Cyclic voltammetry of 12 in MeCN solution shows a well-behaved quasi-reversible (ΔE=100 mV) Ni(III) ↔ Ni(II) couple.     

Donor-functionalized polydentate pyrylium salts and phosphinines: synthesis, structural characterization, and photophysical properties

A series of donor-functionalized pyrylium salts have been prepared by classical condensation reactions which were further converted into the corresponding thienyl- and pyridyl-substituted polydentate lambda(3)-phosphinines by reaction with P(SiMe(3))(3). Further chemical modification of these phosphorus heterocycles with Hg(OAc)(2) in the presence of methanol resulted in the formation of lambda(5)-phosphinines. The photophysical properties of a selected series of thienyl- and pyridyl-functionalized pyrylium salts, lambda(3)- and lambda(5)-phosphinines, were investigated and the results compared and supported by theoretical calculations on the DFT level. Significant fluorescence was observed for the pyrylium salts and lambda(5)-phosphinines. In contrast, the heteroaromatic substituted lambda(3)-phosphinines show very little emission which is consistent with the low oscillator strength predicted by DFT calculations for this pi-->pi* transition. Furthermore, all three classes of compounds show readily observable phosphorescence in solution, which was determined by time-gated detection at low temperature.     

Novel (1H-tetrazol-5-yl-NNO-azoxy)furazans and their energetic salts: synthesis,characterization and energetic properties

Six novel energetic furazans containing tetrazol-5-yl-NNO-azoxy moiety were synthesized using (cyano-NNO-azoxy)-furazans as starting compounds. The obtained compounds exhibit high enthalpies of formation (531–792 kcal kg^–1), acceptable densities (1.70–1.76 g cm^–3), good thermal stability (T_onset = 146–199 °C), and, as a result, excellent detonation performance (detonation velocities of 8.61–8.95 km s?1 and detonation pressures of 31.6–36.0 GPa).     

Luminescent cyclometalated alkynylgold(III) complexes with 6-phenyl-2,2'-bipyridine derivatives: synthesis, characterization, electrochemistry, photophysics, and computational studies

A novel class of luminescent gold(III) complexes containing various tridentate cyclometalating ligands derived from 6-phenyl-2,2'-bipyridine and alkynyl ligands, [Au(RC^N^N)(C≡C-R')]PF(6), has been successfully synthesized and characterized. One of the complexes has also been determined by X-ray crystallography. Electrochemical studies show a ligand-centered reduction originated from the cyclometalating RC^N^N ligands as well as an alkynyl-centered oxidation. The electronic absorption and photoluminescence properties of the complexes have also been investigated. In acetonitrile at room temperature, the complexes show intense absorption at higher energy region with wavelength shorter than 320 nm, and a moderately intense broad absorption band at 374-406 nm, assigned as the metal-perturbed intraligand π-π* transition of the cyclometalating RC(∧)N(∧)N ligand, with some charge transfer character from the aryl ring to the bipyridine moiety. Most of the complexes have been observed to show vibronic-structured emission bands at 469-550 nm in butyronitile glass at 77 K, assigned to an intraligand excited state of the RC^N^N ligand, with some charge transfer character from the aryl to the bipyridyine moiety. Insights into the origin of the absorption and emission have also been provided by density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations.     

Synthesis and characterization of perfluorinated nitriles and the corresponding sodium 5-perfluoroalkyltetrazolate salts

The high-yield syntheses of trifluoroacetonitrile (1a), pentafluoropropionitrile (1b) and heptafluorobutyronitrile (1c) under mild reaction conditions using readily available starting materials (trifluoroacetamide, pentafluoropropionamide, heptafluorobutanamide) are described. Furthermore, the reactions of the perfluoroalkyl nitriles with sodium azide in acetonitrile forming sodium 5-trifluoromethyltetrazolate (2a), sodium 5-pentafluoroethyltetrazolate (2b) and sodium 5-heptafluoropropyltetrazolate (2c) were undertaken. The 5-perfluoroalkyltetrazolate salts were characterized using vibrational (Raman and infrared) and multinuclear (¹³C, ^14/15N, ¹⁹F) NMR spectroscopy, differential scanning calorimetry, mass spectrometry and elemental analysis. Additionally, the single crystal X-ray structure of the monohydrate of 2a was determined. Crystal data: 2a·H₂O: monoclinic, C2/m, a = 18.8588(6) Å, b = 7.1857(2) Å, c = 9.3731(3) Å, β = 102.938(3)°, V = 1237.94(7) Å³, Z = 8, D_calc = 1.911 g cm⁻³.     

Reactivity studies,structural characterization,and thermolysis of cubic titanosiloxanes: precursors to titanosilicate materials which catalyze olefin epoxidation

The cubic titanosiloxane [RSiO(3)Ti(OPr(i))](4) (R = 2,6-Pr(2)(i)C(6)H(3)NSiMe(3)) (1) is found to be relatively inert in its attempted reactions with alcohols and other acidic hydrogen containing compounds. The reaction of 1 with silanol (Bu(t)O)(3)SiOH however proceeds over a period of approximately 3 months to result in the hydrolysis of (Bu(t)O)(3)SiOH and yield the transesterification product [RSiO(3)Ti(OBu(t))](4) (2) rather than the expected [RSiO(3)Ti(OSi(OBu(t))(3))](4). Products 1 and 2 have been characterized by elemental analysis, thermal analysis, and spectroscopic techniques (IR, EI-MS, and NMR). The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. Compounds 1 and 2 are isomorphous and crystallize in a cubic space group with a central cubic Ti(4)Si(4)O(12) core. Solid state thermolysis of 1 was carried at 450, 600, 800, 900, 1000, and 1200 degrees C in air, and the resulting titanosilicate materials 1a-f were characterized by spectroscopic (IR and DR UV), powder XRD, and electron microscopic methods. While, the presence of Ti-O-Si linkages appears to be dominant in the samples prepared at lower temperatures (450-800 degrees C), phase separation of anatase and rutile forms of TiO(2) occurs at temperatures above 900 degrees C as revealed by IR spectral and PXRD studies. The presence of octahedral titanium centers was observed by DR UV spectroscopy for the samples heated at higher temperatures. The use of new titanosilicate materials as catalysts for olefin epoxidation has been investigated. The titanosilicate materials produced at temperatures below 800 degrees C with a large number of Ti-O-Si linkages (or tetrahedral titanium centers) were found to be more active catalysts compared to the materials produced above 900 degrees C. The observed conversion in the epoxidation reactions was found to be somewhat low although the selectivity of the epoxide formation over the other possible oxidized products was found to be very good.     

Luminescent triarylborane-functionalized polystyrene: synthesis, photophysical characterization, and anion-binding studies

A new class of highly fluorescent triarylborane polymers has been prepared from trimethylsilyl-substituted polystyrene via a modular approach that involves selective polymer modification reactions with organometallic reagents. The photophysical properties, environmental stability, and the Lewis acidity of the boron sites have been tailored through modifications in the substitution pattern on boron. The photophysical properties are indicative of electronic communication between the chromophores attached to polystyrene, which has been exploited for the efficient probing of fluoride and cyanide in the micromolar concentration range.