Gas sorption in poly(vinyl benzoate)

High-pressure sorption (up to 50 atm) for CO₂, N₂, and Ar in poly(vinyl benzoate) (PVB) was studied at temperatures from 25 to 70°C by a gravimetric method utilizing an electromicrobalance. The results are described by Henry's law above the glass transition temperature T_g for all gases. The dual-mode sorption model, Henry's law plus a Langmuir isotherm, applies to the sorption isotherms of N₂ and Ar in the glassy state, and the dual-mode parameters are given. For CO₂, a new type of sorption isotherm is observed below T_g. The isotherm is concave to the pressure axis in the low-pressure region and turns into a straight line with increasing CO₂ pressure which can be extrapolated back to the coordinate origin. The linear part of the isotherm is characteristic of the rubbery state, while the nonlinear part stems from glassystate behavior. The “glass transition solubility” of CO₂, at which PVB film changes from the glassy to the rubbery state, decrease as the temperature increases. The disappearance of microvoids, that is, the decrease of the Langmuir capacity, may be due to a large plasticizing effect of sorbed CO₂. The difference between the N₂ and Ar isotherms and the CO₂ isotherm is discussed from this standpoint.     

Model for sorption of mixed gases in glassy polymers

A model is presented for analysis of the sorption of mixed gases in glassy polymers at concentrations below which significant plasticization occurs. The well-known dual-mode sorption model comprised of a Henry's law term and a Langmuir isotherm term, which has been used extensively for interpretation of single-component gas sorption data, forms the basis for the analysis of binary mixtures discussed here. Measurements using pure gases provide dual mode parameters which can then be used to predict the resultant sorption isotherms for binary mixtures of any of the pure gases. The proposed analysis is based upon recognition that the Langmuir component of the overall sorption concentration should be governed by competition between the two penetrants for the fixed unrelaxed volume in the polymer, which is believed to be the locus of the Langmuir capacity. This effect may result in a significant depression of the measured sorption of similar penetrants competing for the limited Langmuir capacity. A numerical example is considered which illustrates the range of behavior expected for CO₂ and CH₄ in polycarbonate. Deviations from the theoretical predictions of the simple dual-mode model for binary systems are discussed in terms of plasticizing effects on the Henry's law constant and the Langmuir affinity constant. The analyses proposed here are of direct and critical interest to the applied problems of migration of trace contaminants in glassy polymers and analysis of barrier packaging for foods since all of these applied problems involve mixed-penetrant sorption. Specifically, it is predicted that the presence of residual monomers or solvents in glassy polymers can produce both anomolously low Langmuir sorption affinity constants and sorption enthalpies compared with the residual-free case.     

Gas sorption in polymers based on bisphenol-A

Equilibrium gas sorption measurements for CO₂, CH₄, and N₂ were made with three polymers based on bisphenol-A, namely a polyhydroxyether, a polyetherimide, and a polyarylate. These data plus previous results for two other bisphenol-A polymers, polycarhonate and polysulfone, were analyzed using the dual-mode sorption model and the more recent gas-polymer-matrix model. The models were compared on the basis of physical interpretations of the resulting parameters. The Langmuir capacity from the dual-model model was related to the unrelaxed volume of the glassy polymer. The Henry's law sorption parameter from the dual-mode model was related to the internal pressure of the polymer and to its tensile stress at yield. The work suggests a means for estimation of gas sorption levels from thermal and mechanical properties of the polymer.     

Model of sorption of simple molecules in polymers

A model of simple molecule sorption in polymers is proposed which embraces both the glassy and rubbery regions, and incorporates the successful dual-mode model below the glass-transition temperature. Hole filling is shown to be an important sorption mechanism both above and below T_g, although saturation effects do not occur in the rubbery polymer. The model interprets the “dual-mode” Langmuir and Henry's law parameters at the molecular level, and a simple statistical mechanical analysis allows estimation of the parameter values, as well as specifying certain interrelationships between the parameters. Applications of the model to gas solubility data in five polymers are considered [polyethylene (PE), poly(ethylene terephthalate) (PET), polystyrene (PS), polymethacrylate (PMA), poly(vinyl acetate) (PVAc)] and semiquantitative agreement is obtained for PE, PET, and to a lesser extent, PS. For PMA and PVAc, the agreement is qualitative only.     

The effect of plasticization on the transport of gases in and through glassy polymers

The effects of plasticization on the transport of gases and vapors in and through glassy polymers are examined from the viewpoint of the “dual-mode” sorption model with partial immobilization. The analysis assumes the existence of two penetrant populations with different mobilities in the Henry's law and Langmuir domains of the glassy polymers. These mobilities are characterized by their mutual diffusion coefficients D_D and D_H. The plasticization of the polymer by penetrant gases is reflected in the concentration dependence of D_D and D_H. Expressions for the effective (apparent) diffusion and permeability coefficients are derived assuming that D_D and D_H are exponential functions of the penetrant concentration in the polymers. The results of this study are compared with a similar analysis which assumed the existence of a single mobile penetrant population. The present analysis provides information on the effects of plasticization on the penetrant transport in the Henry's law and Langmuir domains separately. The effects of antiplasticization or clustering of penetrant molecules on the effective diffusion and permeability coefficients are also examined.     

Pure hydrocarbon sorption properties of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and PTMSP/PPP blends

Propane and n-butane sorption in blends of poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-phenyl-1-propyne) (PPP) have been determined. Solubilities of propane and n-butane increased as the PTMSP content in the blends increased. This result is consistent with the higher free volume of PTMSP-rich blends and the better thermodynamic compatibility between PTMSP and these hydrocarbons. Propane and n-butane sorption isotherms were well described by the dual-mode model for sorption in glassy polymers. PTMSP/PPP blends are strongly phase-separated, heterogeneous materials. A noninteracting domain model developed for sorption in phase-separated glassy polymer blends suggests that sorption in the Henry's law regions (i.e., the equilibrium, dense phase of the blends) is consistent with the model. However, Langmuir capacity parameters in the blends are lower than predicted from the domain model, suggesting that the amount of nonequilibrium excess free volume associated with the Langmuir sites depends on blend composition. © 1996 John Wiley & Sons, Inc.     

Sorption of carbon dioxide in fluorinated poyimides

Sorption isotherms of CO₂ for ten fluorinated polyimides measured at 35°C and up to about 25 atm are analyzed according to the dual-mode sorption model. Sorption properties for these polyimides are compared with those for other glassy Polymers including unfluorinated polyimides. The glassy polymers with higher glass transition temperatures T_g tend to show greater CO₂ sorption. Introduction of a ? C (CF₃)₂? linkage into the repeat unit of the main chain increases the sorption by 20–80%. For glassy polymers, including the fluorinated and unfluorinated polyimides, the Langmuir affinity constant b and Henry's law solubility constant k_D are correlated with the content of functional (carbonyl or sulfonyl) groups [FG], and composite parameter reflecting the magnitude of both [FG] and free-space fraction V_F, respectively, with some exceptions. The Langmuir capacity constant C′_H is correlated with T_g, but there are two correlation lines; one for unfluorinated polyimides and a different one for other glassy polymers including fluorinated polyimides. The slope of the former group is smaller probably because of smaller differences in thermal probably because of smaller differences in thermal expansion coefficients in rubbery and glassy states. Most fluorinated polyimides show greater solubility of CO₂ than unfluorinated polyimides and other glassy polymers, because of their larger C′_H and k_D. © 1993 John Wiley & Sons, Inc.     

On the crystallinity effect on the gas sorption in semicrystalline linear low density polyethylene (LLDPE)

This article describes the solubility of carbon dioxide, ethylene and propane in 1‐octene based polyethylene of 0.94, 0.92, 0.904, and 0.87 densities. The isotherms obtained in the gas sorption experimental device display a sorption behavior similar to that of glassy polymers. We apply the dual model to semicrystalline polymers assuming that Henry's sites are related to the amorphous phase, which decreases when the crystallinity percentage increases, whereas the surface of the crystalline phase acts as a Langmuir site with higher gas‐polymer affinity than glassy polymers. The good concordance of the calculated k_D values, using the Flory‐Huggins theory of polymer diluent mixtures, with the experimental results suggest that Henry's gas sorption fulfills this theory and, therefore, it may be a suitable way to estimate polymer‐gas enthalpic interactions. Particularly, the variation of k_D with the crystallinity fraction is exponential and the proportionality of the total sorption with the amorphous content seems only apparent. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1798–1807, 2007     

Effects of carbon filler on sorption and diffusion of gases through rubbery materials

Effects of carbon filler on the sorption and diffusion of carbon dioxide in natural rubber and in styrene-butadiene rubber have been studied. Sorption isotherms conform to Henry's law in unfilled rubber and to Langmuir's law in carbon black. The isotherms in filled rubber exhibit a combination of the two sorption modes. The Henry's law solubility parameter k_D increases with carbon filler content; the Langmuir saturation constant C′_A initially is constant with filler level, but then decreases abruptly when carbon particles begin to aggregate. The diffusion coefficient decreases with increasing filler content, presumably owing to geometric effects and to polymer chain immobilization in the interfacial regions.     

The effect of morphology on sorption and transport of carbon dioxide in a polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and 4,4′-oxydianiline

Sorption and transport of CO₂ have been investigated for polyimide films prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianilline (ODA) as well as for a chemically identical commercial polyimide film, Upilex-R. The BPDA-ODA polyimide films annealed above the glass transition temperature (270°C) are found to have some degree of ordering owing to molecular aggregation of polymer chains, whereas the films as-cast are amorphous. The solubility, permeability, and diffusion coefficients decrease significantly with increasing density or increasing average degree of molecular aggregation. The influence of morphology on the parameters in the dual-mode sorption and transport model has also been investigated. With an increase in density, the Langmuir capacity constant and the diffusion coefficients for Henry's law and Langmuir populations decrease by a larger factor than the Henry's law solubility constant. These results can be tentatively interpreted by assuming either a one-phase or two-phase structure for these polyimide films.     

Gas transport in polymers based on bisphenol-A

Permeation measurements for CO₂, CH₄, O₂, N₂, and He were made with three polymers based on bisphenol-A, namely a polyhydroxyether, a polyetherimide, and a polyarylate. Measurements were also made for CO₂ and CH₄ in polysulfone. The data for CO₂, CH₄, and N₂ plus previous data for these gases in polycarbonate and polysulfone were combined with equilibrium gas sorption data and analyzed with the dual mode/partial immobilization model and the more recent gas-polymer-matrix model. A comparison of the two models was done on the basis of physical interpretations of the resulting parameters. The diffusion coefficient for the Henry's law population was related to the kinetic diameter of the gas. The infinite dilution, Henry's law, and Langmuir diffusion coefficients were related to the free volume of the polymer. The work suggests a means for order-of-magnitude estimation of diffusion coefficients from polymer density and molecular structure.     

The effect of morphology on sorption and transport of carbon dioxide in poly(4,4'-oxydiphenylene pyromellitimide)

Sorption and transport of carbon dioxide were investigated for poly(4,4'-oxydiphenylene-pyromellitimide) films (PI-1, PI-2, and PI-3) imidized at 160, 200, and 400°C, respectively, as well as for a chemically identical commercial polyimide film, Kapton-H. The solubility, permeability, and diffusion coefficients (S, P, and \[ \overline D \] , respectively) at 80°C and 20 atm in PI-3 were 67, 25, and 37%, respectively, as large as those in PI-2. These significant reductions are attributed to a higher degree of segmental aggregation in PI-3 caused by a 1.7% increase in the density (d) as compared with PI-2. The differences in S, P, \[ \overline D \] , and d between PI-3 and Kapton-H were rather small as compared with those between PI-3 and PI-2, suggesting that the in-plane orientation has a minor effect on the sorption and transport in Kapton-H as compared with the aggregation. Influence of the morphology on the dual-mode sorption and transport parameters was also investigated. With increasing density, the Langmuir capacity constant and the diffusion coefficients for the Henry's law and Langmuir populations decreased by higher rates than the Henry's law solubility constant, being contrary to the results reported for a typical semicrystalline glassy polymer, polyethylene terephthalate. This may suggest that the nonaggregated or less-aggregated regions taking an important part in the sorption and transport are denser for the sample having a higher overall density.     

Carbon dioxide sorption and transport in polycarbonate

The solubility, permeability, and diffusion time lag for carbon dioxide in polycarbonate are reported at 35°C for pressures ranging from 1 atm to 23 atm. The solubility data are very well described by the dual sorption mechanism model, Henry's law plus Langmuir adsorption, proposed for glassy polymers. Both the permeability and time lag decrease with increased CO₂ pressure. These observations are not consistent with the proposal that CO₂ sorbed by the Langmuir contribution is totally immobilized; however, all of the results are entirely consistent with an extension of this proposal which considers partial immobilization. The data have been quantitatively analyzed in terms of this partial immobilization model, and the results suggest for polycarbonate at 35°C that the CC₂ sorbed by the Langmuir portion of the isotherm behaves as if it has only about 10% of the mobility of the gas sorbed by the Henry's law part of the isotherm. The results have also been interpreted in terms of a concentration-dependent diffusion coefficient which is shown to be mathematically equivalent to the partial immobilization model. The latter model was also formulated in thermodynamic terms, whereby fugacity was used rather than pressure, and diffusion coefficients were defined in terms of chemical potential gradients rather than concentration, but the consequences of these changes proved to be minor and no better. The significance of these observations and their interpretation is discussed.     

Sorption and transport of carbon dioxide in a polyimide from 3,3′4,4′-biphenyltetracarboxylic dianhydride and 4,4′-diaminodiphenyl sulfone

CO₂ sorption and transport were investigated for the polyimide prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-diaminodiphenyl sulfone (DDS). The morphology of films did not change on annealing above the glass transition temperature and remained amorphous unlike the polyimide prepared from BPDA and 4,4′-oxydianilline (ODA). This seems to be due to the strong hindrance to rotation of the sulfonyl linkage. Sorption and transport data were analyzed according to the dual-mode model. Solubility, diffusion, and permeability coefficients at 20 atm and 80°C for BPDA-DDS polyimide were substantially equal between as-cast and annealed films and were 1.7, 2.2, and 3.7 times greater, respectively, than for the as-cast films of the BPDA-ODA polyimide. The higher solubility was due to larger values of the Henry's law solubility constant k_D, Langmuir capacity constant C, and the Langmuir affinity constant b. The sorption and transport properties were compared with those for amorphous glassy aromatic polymers including other polyimides. The relation of k, C, b, and the diffusion coefficients in the Henry's law population and the Langmuir population (D_D and D_H) with other properties of the polymers were discussed. Values D_D and D_H for BPDA-DDS polyimide were much larger than expected from the estimated free-volume fraction.     

Sorption and diffusion of gases in a polyimide

Sorption and diffusion of gases (CO₂, N₂, and He) in a polyimide (PI2080) film were measured by using an apparatus which gives the sorption rate curves from the initial state to the equilibrium state. Nonlinear isotherms observed for CO₂ sorption were interpreted successfully in terms of the dual-mode model for sorption in glassy polymers. Linear isotherms observed for N₂ and He seemed to obey Henry's law. Two diffusion coefficients (D_I and D_E) were obtained using the short-time method and the long-time method for a Fickian diffusion model, together with the equilibrium solubility (C_e) from each experiment. The initial sorption rate curves agreed with the calculated curves using D_I, however near sorption equilibrium the curves are in accord with the calculated curves using D_E. These observations suggest that some relaxation process is superimposed on the diffusion process. The non-Fickian transport data were correlated successfully with a model that combines time-dependent diffusion and the Fickian model.     

Kinetics and equilibria of sulfur dioxide sorption in kapton polyimide

The kinetics and equilibria of SO₂ sorption in Kapton polyimide film have been measured at 25°C for pressures up to 58 cm Hg using a quartz spring balance. The observed equilibria are described well by the dual-mode model for sorption of penetrants in glassy polymers. Observed hysteresis in sorption-desorption cycling indicates that the diffusivity of SO₂ increases markedly with increasing local penetrant concentration in the polymer. The concentration dependence of the effective average diffusion coefficient is described well by an expression from dual-mode theory. The Langmuir component of the sorption population has an extremely low mobility compared to that of the Henry's law component; in fact, the so-called “total immobilization” limiting case, which assigns a zero diffusion coefficient to this component, appears to be satisfactory under the conditions studied. These results, coupled with published results for other penetrants, suggest that the degree of immobilization of the Langmuir population depends to a great extent on the condensability and/or the molecular size of the penetrant. Predictions of the SO₂ diffusion time lag and permeability in Kapton as functions of the upstream SO₂ pressure are presented and discussed in terms of the dual-mode theory.     

An application of an homogenization method to a model of diffusion in glassy polymers

The sorption of gases in polymers below their glass-transition temperature T_g is known in many cases to be described by the “dual sorption” theory, according to which the gas is held in accordance with both the Langmuir and Henry's laws. Based on this theory, expressions for the “effective diffusion coefficient” in the glassy polymers have been obtained by investigators in the past, notably by Paul and Koros.² The present analysis regards the glassy polymers as inhomogeneous with regions on which the gas sorption follows the Langmuir law. Assuming that the linear dimensions of these regions, which are often referred to as “microvoids” (although they are not space filled by vacuum), are small compared to the macroscopic length of interest but large compared to the mean free path of the penetrant gas molecules, we derive a rigorous relation between the average flux and the concentration gradient in the polymer and show that this relation can be expressed in terms of an “effective diffusion coefficient” D_eff which depends on the details of the microstructure, i.e., the size, shape and spatial distribution of the “microvoids.” This expression for D_eff is shown to reduce to that of Paul and Koros² in two situations: (1) when the “voids” consist of slabs running parallel to the concentration gradient, and (2) when the “voids” are spherical and the temperature of the polymer is not too different from T_g. The results of the present study lead to an alternative procedure for interpreting the experimental data on sorption and permeation which may have some advantages over the procedure currently employed. Finally, the analysis presented here is also applicable to polymers containing adsorptive fillers.     

Dual mode model for mixed gas permeation of CO2, H2, and N2 through a dry chitosan membrane

Dry chitosan is an excellent candidate for facilitated transport membranes that can be utilized in industrial applications, such as fuel cell operations and other purification processes. This article is the first to report temperature effects on transport properties of CO₂, H₂, and N₂ in a gas mixture typical of such applications. At a feed pressure of 1.5 atm, CO₂ permeabilities increased (0.381–26.1 barrers) at temperatures of 20–150 °C with decreasing CO₂/N₂ (19.7–4.55) and CO₂/H₂ (3.14–1.71) separation factors. The pressure effect on solubilities and permeabilities were fitted to the extended dual mode model and its corresponding mixed gas permeation model. The dual mode and transport parameters, the sorption heats and the activation energies of Henry's and Langmuir's regimes and their pre‐exponential parameters were determined. The Langmuir's capacity constants were utilized to estimate chitosan's glass transition temperature (CO₂: 172 °C, N₂: 175 °C, and H₂: 171 °C). The activation energies of diffusion in the Henry's law and Langmuir regimes were dependent on the collision diameter of the gases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2620–2631, 2007     

The effect of lattice compressibility on the thermodynamics of gas sorption in polymers

A compressible lattice model with holes, the glassy polymer lattice sorption model (GPLSM), was used to model the sorption of carbon dioxide, methane, and ethylene in glassy polycarbonate and carbon dioxide in glassy tetramethyl polycarbonate. For glassy polymers, an incompressible lattice model, such as the Flory–Huggins theory, requires concentration-dependent and physically unrealistic values for the lattice site volumes in order to satisfy lattice incompressibility. Rather than forcing lattice incompressibility, GPLSM was used and reasonable parameter values were obtained. The effect of conditioning on gas sorption in glassy polymers was analyzed quantitatively with GPLSM. The Henry's law constant decreases significantly upon gas conditioning, reflecting changes in the polymer matrix at infinite dilution. Treating the Henry's law constant as a hypothetical vapor pressure at infinite dilution, gas molecules in the conditioned polymer are less “volatile” than those in the unconditioned polymer. Flory–Huggins theory was used to model the sorption of carbon dioxide, methane, and ethylene in silicone rubber. Above the glass transition temperature, the criterion of lattice incompressibility for Flory-Huggins theory was satisfied with physically realistic and constant values for the lattice site volumes. © 1992 John Wiley & Sons, Inc.