Photoconductivity of poly(vinyl alcohol) films containing Cu2+ complexes

Photoconductivity has been measured in well-dried poly(vinyl alcohol) (PVAl) films containing Cu²⁺ complexes prepared by treatment with Cu(NO₃)₂, CuSO₄, CuCl₂, and CuBr₂. When the ratio [Cu²⁺]/[MU] ([MU] denoting the concentration of PVAl monomer residues) is greater than 0.015, illumination at the charge-transfer (UV) band produces a strong photocurrent in PVAl-CuCl₂ and PVAl-CuBr₂, but not in PVAl-Cu(NO₃)₂ or PVAl-CuSO₄. Optical absorption spectra suggest that two halide ions enter the first coordination sphere in the cis configuration. The temperature dependence of ESR indicates the existence of antiferromagnetic superexchange interaction via intervening halide ions. Hence, there exists a network structure of the PVAl-CuCl₂ or PVAl-CuBr₂ complex. The dependence of the photocurrent on the polarity of the illuminated electrode shows that the majority of carriers are holes. Holes in the network structure produced by charge transfer from halogen to Cu²⁺ ions are concluded to be responsible for the photoconduction.     

Polyiodide composition in poly(vinyl acetate)-iodine-iodide complex

Polyiodide formed by complexation of poly(vinyl acetate) (PVAc) with iodine in the presence of iodide has been investigated by chemical analysis and resonance Raman spectrophotometry. When PVAc films were immersed in iodide-iodine aqueous solutions which had different ratios of iodide to iodine concentration [I^?]/[I₂], the complex films exhibited tremendous variations of swelling degree, despite the relatively small change in the amount of bound iodine. From a quantitative chemical analysis, the composition of polyiodide bound to PVAc was found to be 1.01 ± 0.035 in the molar ratio of iodide to iodine irrespective of the composition of the iodide-iodine aqueous solution ([I^?]/[I₂] = 2–500). The polyiodide formed in PVAc-iodine-iodide complex was therefore inferred to be (I₃^?)_n. Resonance Raman spectra obtained on PVAc-iodine-iodide complexes were also identical to those of the benzamide-iodine complex, in which the polyiodide consists of (I₃^?)_n, consistent with the result from chemical analysis.     

Synthesis and characterization of poly(3-acetyl-4-hydroxyphenyl acrylate) and its Cu(II) and Ni(II) complexes

3-Acetyl-4-hydroxyphenyl acrylate (AHPA) was synthesized by treating acryloyl chloride with 2,5-dihydroxy acetophenone in the presence of triethylamine at 0 °C. AHPA was polymerized in ethyl methyl ketone (EMK) at 70 °C by free radical polymerization under nitrogen atmosphere using benzoyl peroxide as initiator. The monomer and the polymer were characterized by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopy. The polymer-metal complexes were obtained by the reaction of chloroform solution of poly(AHPA) with aqueous solution of Cu(II)/Ni(II) acetates. The polymer-metal complexes were characterized by FT-IR and the results revealed that the ligands are coordinated through the oxygen of the keto group and oxygen of the phenolic -OH group to the metal ions. The electronic spectra and magnetic moment of polymer-metal complexes showed an distorted octahedral and square planar structure for poly(AHPA)-Ni(II) and poly(AHPA)-Cu(II) complexes respectively. The X-ray diffraction studies revealed that while the polymer was amorphous the polymer-metal complexes were crystalline. The thermal stability and glass transition temperature of the polymer-metal complexes were found to be higher than that of the polymer.     

Radiolysis of aqueous solutions of poly(vinyl alcohol) at 77 K

Paramagnetic products of low-temperature X-ray radiolysis of aqueous poly(vinyl alcohol) solutions (2.5 and 5% by weight) were studied by ESR spectroscopy. Experimental spectra were ascribed to a superposition of signals from hydroxyl radicals and –CH₂?^?C(OH)–CH₂? macroradicals (C_α-macroradicals), respectively. No ESR signals corresponding to trapped electrons were observed that was attributed to the peculiarities of microheterogenous structure of the frozen aqueous polymer solutions. Annealing at 115 K resulted in partial conversion of OH radicals to C_α-macroradicals. It was suggested that main part of hydroxyl radicals was stabilized in phase of polycrystalline ice while macroradicals were formed in “mixed” water–polymer phase. The radiation–chemical yields of paramagnetic species stabilized in the systems under study were determined.     

NMR studies of chlorinated poly(vinyl chloride) and polybutadiene

Molecular structures of chlorinated poly(vinyl chloride) and polybutadiene have been studied by high resolution NMR. The spectra of the chlorinated polymers give broad signals. New peaks appear in the lower fields of the ? CH₂? and ? CHCl? groups with increasing chlorine content. The chlorination of poly(vinyl chloride) takes place predominantly on ? CH₂? rather than on ? CHCl? , e.g., a 70% chlorinated polymer has about 10 mole-% of ? CCl₂? groups. Polybutadiene reacts first with chlorine by addition to give a head-to-head poly(vinyl chloride), and then the substitution of the hydrogen atom takes place. Chlorinated polybutadiene with 70% Cl has about 18 mole-% of ? CCl₂? . The multiplets characteristic of spin-spin couplings in the spectrum of the original poly(vinyl chloride) are still observed in that of the highly chlorinated product. This fact shows that a considerable number of poly(vinyl chloride) sequences of certain lengths persist in the highly chlorinated polymer.     

Reactions of OH* and eaq − with uracil and thymine in the presence of Cu(II) ions in dilute aqueous solutions: A pulse radiolysis study

The reactions of OH^* and e_aq ^? adducts of uracil and thymine with Cu(II) ions in aqueous solutions were followed by pulse radiolysis. The transient absorption spectra of the OH^* adducts of uracil when followed in the presence of Cu(II) ions show growth in absorption at wavelengths 420 and 350 nm at 15 μs and 65 μs after the pulse respectively. Similar transient absorption spectra of thymine showed growth in absorption at wavelengths 390 and 320 nm at 38 μs and 65 μs after the pulse respectively. The rates of electron transfer from the OH^* adducts of uracil and thymine to various Cu(II) compounds when monitored at 360 nm lie between 10⁶ and 10⁸ mol^?1 dm³ s^?1 this implies that the electron transfer process is not an efficient process. Low rate constants coupled with the spectral changes suggest formation of a radical copper adduct which decays by water insertion to give cis-glycols as the major product. The electron transfer from the electron adducts of uracil and thymine to various copper(II) compounds takes place more efficiently (rate constants of the order of 10⁸ and 10⁹ mol^?1 dm³ s^?1) compared with that from the OH^* adducts. The t-butanol radicals formed on scavenging the OH^* radicals also produce adducts with Cu(I) ions which are formed on oxidation of the electron adducts by Cu(II) ions. This adduct has absorption around 400 nm both in the case of uracil and thymine.     

Synthesis and characterization of poly(phosphon acetal) derivatives of poly(vinyl alcohol)

Preparation of poly(phosphonoacetals) (PPA) by transacetalation of poly(vinyl alcohol) with diethyl-phosphonoacetal is described. PPA with a degree of substitution of 60% is an alcoholsoluble polymer with a glass transition temperature (T_g) of 67°C. High resolution ¹H and ¹³C NMR spectra reveal the presence of hemiacetals alongside the six-membered acetal ring with an approximate ratio of 2:8 of these substituents. A possible correlation between the microtacticity of the parent PVA and the structure of PPA is indicated; the syndiotactic and isotactic sequences on the parent polymer controls the relationship between the two pendant groups.     

An experimental and computational approach to pH‐dependent self‐aggregation of poly(2‐isopropyl‐2‐oxazoline)

Besides temperature, self‐aggregation of poly(2‐isopropyl‐2‐oxazoline) (PIPOX) can also be triggered via pH in aqueous solution (25 °C, pH > 5). Lowest energy structures and interaction energies of PIPOX with H₃O⁺, OH^?, and H₂O were calculated by DFT methods showed that, in addition to their ability to protonate PIPOX, H₃O⁺ ions had strong interaction with both water and PIPOX in acidic conditions. H₃O⁺ ions acted as compatibilizer between PIPOX and water and increased the solubility of PIPOX. OH^? ions were found to have stronger interaction with water compared to PIPOX resulting in desorption of water molecules from PIPOX phase and decreased solubility, leading to enhanced hydrophobic interactions among isopropyl groups of PIPOX and formation of aggregates at high pH. Results concerning the effect of end‐groups on aggregate size were in good agreement with statistical mechanics calculations. Moreover, the effect of polymer concentration on the aggregate size was examined. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 210–221     

Participation of water in conformational change of isotactic poly(2-hydroxyethyl methacrylate) as studied by viscometry in various electrolytic solutions

Conformational properties of isotactic poly(2-hydroxyethyl methacrylate) (PHEMA) have been studied by viscometry in various electrolytic solutions. The intrinsic viscosity of isotactic PHEMA at 0.01M salt solution increases with decreasing the B coefficient in Jones—Dole's equation. In respective to water structures, a polymer chain is more expanded in the salt solution including water structure breaker ions. As the concentration of ions increases, the interactions between polymer segments and ions make a major contribution to conformational changes of isotactic PHEMA. Depending on the kind of ions, a salting-in or out effect is observed at higher concentrations than 0.1M salt solution. We observed that the denaturing effects of various anions in isotactic PHEMA salt solutions are as follows; SO₄^2- < F^? < I^? NO₃^? < SCN^-. This order is similar to the Hofmeister series. To investigate the influences of denaturing agents on solvent structures, we also compared the guanidine hydrochloride effect with the tetrabutylammonium chloride effect in isotactic PHEMA solution.     

Preparation and characterization of cyclic poly(oxypropylene)

Poly(propylene glycol) [α-hydro-ω-hydroxypoly(oxypropylene)] of number-average molar mass M̄_n ≈ 2000 g · mol⁻¹ (PPG2000) was cyclised with high conversion (ca. 75%) by reaction with dichloromethane in the presence of powdered KOH. The cyclic product was separated from chain extended polymer by preparative GPC, giving an overall yield of polymer (M̄_n ≈ 2000 g · mol⁻¹, narrow molar mass distribution) in excess of 50%. Characterisation by analytical GPC and ¹³C NMR spectroscopy confirmed cyclisation. DEPT and ¹H-coupled NMR spectra were used to show that the links in cyclic poly(oxypropylene) were 77% single acetal, 12% double acetal and 11% triple acetal (or higher). This complexity probably results from competitive reaction with water introduced with KOH.     

Dilute solutions of poly(vinyl alcohol) derived from vinyl trifluoroacetate

The dilute-solution behavior of poly(vinyl alcohol) (PVA_VTFA), derived from vinyl trifluoroacetate, in water-dimethylsulfoxide (DMSO) mixtures was investigated. With solvent mixtures ranging from 10 to 20 vol % DMSO, the relation between the reduced viscosity η_sp/C and the polymer concentration C was linear for polymer concentrations above 0.2 g/dL, whereas in solutions in mixed solvents of other compositions the dependence was linear for polymer concentrations above 0.1 g/dL. The relation between the intrinsic viscosity [η] obtained for aqueous solutions of PVA_VTFA and the molecular weight M estimated from viscosity measurements in solutions of poly(vinyl acetate) (PVA_VTFA), obtained by acetylation of PVA_VTFA, was given by [η] = 7.34 × 10^?4 M^0.63. The value of [η] was greatest for the solvent mixture with 10 vol % DMSO and smallest for about 50 vol % DMSO, and Huggins constants k were smallest and greatest for these two cases, respectively. The turbidity of the solutions of low-molecular-weight PVA_VTFA, was higher than that of high-molecular-weight PVA_VTFA up to 30 vol % DMSO, and the reverse relation held for 40-70 vol % DMSO.     

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) and its model compounds

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) were studied in comparison with those of the model formals obtained from stereoisomers of pentane-2,4-diol and heptane-2,4,6-triol in order to learn spectral changes due to differences of the steric structures of the polymer. In the NMR spectrum of transformal obtained from dl diol or dl,dl (syndiotactic) triol, all proton signals were well interpreted by assuming a rapid chair-chair inversion of the formal ring. On the other hand, no such inversion was observed spectroscopically in cis-formal obtained from the meso diol or meso,meso (isotactic) triol, and the cis-formal ring was supposed to take a diequatorial form preferentially. Consequently, dioxymethylene protons gave a single peak (equivalent) in trans-formal and an AB quartet (nonequivalent) in cis-formal. In the spectra of poly(vinyl formal), the dioxymethylene signal was an overlap of the singlet and quartet in dimethylsulfoxide solution. Observations of the spectra of various poly(vinyl formals) obtained from poly(vinyl alcohols) of different tacticities and study of temperature dependence of the signal have shown that the singlet and quartet are attributed to trans- and cis- formals, respectively, in the polymer spectrum also. In the infrared spectra of poly(vinyl formals), the 800 and 785 cm^-1 bands were found to be related to cis- and trans-formal rings respectively. A linear relationship was confirmed between D₇₈₅/D₈₀₀ and trans/cis ratios determined from the peak intensities of the dioxymethylene proton signals.     

Conductivity monitoring of inorganic anions with a Cu(II)-containing poly(3-methylthiophene) electrode in single-column ion chromatography

An amperometric detector unit equipped with a Cu(II)-containing poly(3-methylthiophene) working electrode is described for the single-column ion chromatographic detection of electroinactive inorganic anions, such as F^?, Cl^?, Br^?, NO₂^? and NO₃^?. Chromatograms obtained with this unit and with a commercial conductivity detector are almost identical with regard to peak height. Thus, an amperometric unit employing this modified electrode can be used as a conductance monitor in ion chromatographic analysis. Although the responses of this electrode seem to be conductivity related, the detection principle is probably based on a dual mechanism involving equilibria between copper ions and various anions of the system in addition to simple conductivity changes associated with the passage of analyte plugs. This explains the difference in responses observed with platinum and stainless-steel electrodes used in the same cell configuration. The detector displays a linear range of at least two orders of magnitude on a logarithmic scale.     

Self‐assembly properties of Salamo‐type trinuclear Cu(II) and Co(II) complexes based on the regulation of H+/OHˉ

A novel naphthalenediol‐based bis(salamo)‐type tetraoxime compound (H₄L) was designed and synthesized. Two new supramolecular complexes, [Cu₃(L)(μ‐OAc)₂] and [Co₃(L)(μ‐OAc)₂(MeOH)₂]·4CHCl₃ were synthesized by the reaction of H₄L with Cu(II) acetate dihydrate and Co(II) acetate dihydrate, respectively, and were characterized by elemental analyses and X‐ray crystallography. In the Cu(II) complex, Cu1 and Cu2 atoms located in the N₂O₂ sites, and are both penta‐coordinated, and Cu3 atom is also penta‐coordinated by five oxygen atoms. All the three Cu(II) atoms have geometries of slightly distorted tetragonal pyramid. In the Co(II) complex, Co1 and Co3 atoms located in the N₂O₂ sites, and are both penta‐coordinated with geometries of slightly distorted triangular bipyramid and distorted tetragonal pyramid, respectively, while Co2 atom is hexa‐coordinated by six oxygen atoms with a geometry of slightly distorted octahedron. These self‐assembling complexes form different dimensional supramolecular structures through inter‐ and intra‐molecular hydrogen bonds. The coordination bond cleavages of the two complexes have occurred upon the addition of the H⁺, and have reformed again via the neutralization effect of the OH^?. The changes of the two complexes response to the H⁺/OH^? have observed in the UV–Vis and ¹H NMR spectra.     

Complexes of Cu(II) and Co(II) with NN′-bis-8-quinolylethylenediamine

This article describes some complexes of Cu(II) and Co(II with NN′-bis-8-quinolylethylenediamine ligand (nn′). All the compounds are of stoichiometry [MX₂(nn′)] (M = Cu or Co; X = Cl^?, Br^?, I^?, NO^?₃ or SCN^?). The electronic spectra are consistent with distorted octahedral geometry around the ions, indicating the four coordination of the nn′ ligand. Magnetic susceptibility measurements down to 100 K show antiferromagnetic interactions in all the Cu(II) compounds demonstrating the existence of the ionic and bridging X group. Infrared spectra show the presence of ionic and bridging nitrate in the [M(NO₃)₂(nn′)] (M = Co or Cu) compounds and ionic and bridging NCS group in the [Cu(NCS)₂(nn′)] compound.     

Synthesis,spectral and thermal properties of poly(2-hydroxy-4-methacryloyloxybenzaldehyde)-metal complexes

2-Hydroxy-4-methacryloyloxybenzaldehyde (2H4MBA), prepared from methacryloyl chloride and 2,4-dihydroxybenzaldehyde, was polymerized in methyl ethyl ketone at 70°C using benzoyl peroxide as a free radical initiator. Polychelates were obtained from N,N-dimethylformamide solutions of poly(2H4MBA) on addition of aqueous solutions of Cu(II)/Ni(II) ions. The polymers and polychelates were characterized by elemental analyses and spectral studies. The IR spectra of these polychelates suggest that metals are coordinated through the oxygen of the aldehyde group and oxygen of the phenolic—OH group. The electronic spectra, EPR, and magnetic moments of polychelates showed an octahedral and square planar structure for poly(2H4MBA)-Ni(II) and poly(2H4MBA)-Cu(II) complexes, respectively. X-ray diffraction studies reveal that the polychelates are highly crystalline. The thermal properties of polymer-metal complexes and their catalytic activity are discussed. © 1996 John Wiley & Sons, Inc.     

Synthesis and Characterization of New Macrocyclic Cu（Ⅱ） Complexes from Various Diamines, Copper（Ⅱ） Nitrate and 1,4-Bis（2-formylphenoxy）butane

Six new macrocyclic complexes were synthesized by a template reaction of 1,4-bis（2-formylphenoxy）butane with diamines and Cu（NO3）2·3H2O and their structures were proposed on the basis of elemental analysis, FT-IR, UV-Vis, magnetic susceptibility measurements, molar conductivity measurements and mass spectra. The metal to ligand molar ratios of the Cu（Ⅱ） complexes were found to be 1 ： 1. The Cu（Ⅱ） complexes are 1 ： 2 electrolytes as shown by their molar conductivities （∧m） in DMF at 10^-3 mol·L^-1. Due to the existence of free ions the Cu（Ⅱ） complexes are electrically conductive. Their configurations were proposed to be probably distorted octahedral.     

EPR Study of some Copper(II) Coordination Compounds with substituted Biguanides. III

Copper(II) coordination compounds with p-chlorphenylbiguanide of the type: [Cu(Cl-PhBig)₂]X₂ and [Cu(Cl–PhBig)X₂] with X =Cl^?, Br^? NO₃, OH^?, NCS^?, NCO^?, N₃, have been studied by EPR spectroscopy using polycrytalline powders and solutions in DMF. The parameters of the EPR spectra have been used to estimate molecular orbital coefficient, in these compounds and to discuss details of the chemical bonding.     

THE EPR SPECTRA OF TETRADENTATE SCHIFF BASE COMPLEXES OF COPPER (II) II. N,N'-bis(salicylidene)ethylenediimine and 7-methyl-N,N'-bis (salicylidene)ethylenediimine

Abstract

The EPR spectra of single crystals of ⁶³Cu(II) doped N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(sal)₂en] and 7-methyl-N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(7-me sal)₂en] have been studied. The usual doublet spin-Hamiltonian parameters for the complexes have been found to be: Cu(II)[(sal)₂en]; g _z =2.192 ± 0.002; g _x =2.046 ± 0.004; g _y =2.049 ± 0.004; A _z =201.0 × 10^?4 cm^?1; A _x =29.3 × 10^?4 cm^?1; A _y =31.3 × 10^?4 cm^?1; A^N _z =12.6 × 10^?4 cm^?1; A ^N _x =14.5 × 10^?4 cm^?1; A ^N _y =15.7 × 10^?4 cm^?1; A ^H _z =6.3 × 10^?4 cm^?1; A ^H _x =7.3 × 10^?4 cm^?1; A ^H _y =7.9 × 10^?4 cm^?1; Cu(II)[(7-me sal)₂en]; g _z =2.189 ± 0.002; g _x =2.037 ± 0.004; g _y =2.046 ± 0.004; A _z =203.0 × 10^?4 cm^?1; A _x =36.9 × 10^?4 cm^?1; A _y =22.7 × 10^?4 cm^?1; A ^N _z =12.6 × 10^?4 cm^?1; A ^N _x =13.3 × 10^?4 cm^?1; A ^N _y =14.0 × 10^?4 cm^?1. Values of molecular orbital coefficients calculated for these complexes show that their bonding properties are similar to those of other compounds of this type. There is considerable covalency in the metal-ligand [sgrave]-bonds, and significant in-plane pi-bonding is present.     

Ferromagnetically coupled heterobinuclear Cu(II)-Ln(III) complexes with N,N′-bis(2-aminoethyl)-oxamido dianion as a bridged ligand

Six novel μ-oxamido heterobinuclear complexes, namely Cu(oxae)Ln(Me₂bpy)₂-(ClO₄)₃ (Ln? La, Nd, Gd, Tb, Ho, Er), where oxae denotes N, N'-bis(2-aminoethyl)oxamido dianion, Me₂bpy is 4,4'-dimethyl-2,2'-bipyridyl, have been synthesized and characterised by elemental analyses, IR, conductivity measurements and electronic spectra. The temperature dependence of the magnetic susceptibility of Cu(oxae)Gd(Me₂bpy)₂(ClO₄)₃ has been measured over the range 4–300 K. The least-squares fit of the experimental susceptibilities yielded J = 1.87 cm^?1. The observed Gd(III)-Cu(II) coupling is ferromagnetic. One plausible mechanism that can cause a ferromagnetic coupling between Gd(III) and Cu(II) is discussed in terms of spin-polarization.