PVC membrane electrodes for potentiometric determination of tripelennamine

The construction of PVC matrix type tripelennamine ion selective electrodes and their use for direct potentiometry, potentiometric titration and flow injection analysis of tripelennamine cation are described. The membranes of these electrodes consist of tripelennamine-tetraphenylborate, reineckate and picrylsulfonate ion-association complexes dispersed in PVC matrix with tributyl phosphate (TBP) plasticizer. The electrodes exhibit near-Nernstian response over the concentration range of 10^–1-10^–4 M tripelennamine over the pH range 4.5–8.0. Selectivity coefficients data obtained for 17 different organic and inorganic ions are presented. The results obtained for the determination of 29 g/ml-29 mg/ml of tripelennamine with the proposed electrodes show average recoveries of 99.5–99.9% and mean standard deviations of 0.6–1.2%. The data agree well with those obtained by the standard methods.     

Preparation and characterization of a codeine responsive electrode

Summary The behaviour of codeine reineckate and codeine tetraphenylborate membrane electrodes has been observed with a respectiveNernstian response of 58 and 56 mV/decade for 9.3×10^–5–1.3×10^–3 M codeine sulfate solutions. The workingpH ranges were 5–8 and 4–8, respectively. The selectivity towards sugars, amines, amino acids, cations, and some pharmaceutical compounds was found to be satisfactory. The isothermal temperature coefficient was 0.0014 V/°C. The electrodes were applied successfully for the determination of codeine in some pharmaceutical dosage forms with a relative standard deviation range of 0.16–0.30% and an average recovery of 98.6±0.6%.

---

Herstellung und Charakterisierung einer codeinselektiven Elektrode

Zusammenfassung Das Verhalten von Codeinreineckat- und Codeintetraphenylboratmembranelektroden in 9.3×10^–5–1.3×10^–3 M Codeinsulfatlösungen wurde untersucht (Nernstscher Response: 58 bzw. 56 mV/Dekade). Der verwendetepH-Bereich für die beiden Elektroden war 5–8 bzw. 4–8. Ihre Selektivität gegenüber Zuckern, Aminen, Aminosäuren, Kationen und einigen pharmazeutisch aktiven Verbindungen ist zufriedenstellend. Der isotherme Temperaturkoeffizient beträgt 0.0014V/°C. Die Elektroden wurden erfolgreich zur Bestimmung von Codein in einigen pharmazeutischen Präparaten eingesetzt (relative Standardabweichung: 0.16–0.30%).

     

Direct potentiometry and potentiotitrimetry of warfarin and ibuprofen in pharmaceutical preparations using PVC ferroin-based membrane sensors

Sensitive and fast-responding potentiometric sensors are described for the determination of warfarin and ibuprofen. They consist of PVC matrix membranes containing the drag-ferroin ion-association complexes as electroactive materials and dioctylphthalate as a solvent mediator. Linear dynamic response range between 1 × 10^–2 and 2 × 10^–5 M with Nernstian slopes of 59–60 mV/decade concentration and a detection limit of 0.8–1.3 g/ml are obtained. A wide range of organic anions and drag excipients do not interfere. Titration of the drugs with a standard ferroin solution using either a drag-ferroin or ferroin-TPB PVC sensor in conjunction with an Ag-AgCl reference electrode displaysS-shaped titration curves with sharp potential breaks at stoichiometric 12 (ferroin:drug) reaction. Differential titration curves with well-defined peaks at the equivalence points are obtained using drug-ferroin/ferroin-TPB PVC membrane sensors. Direct potentiometry and potentiotitrimetry of warfarin and ibuprofen in various pharmaceutical preparations are presented and compared. Several advantages over the pharmacopoeial methods and other techniques in current use are offered by the proposed technique.     

Effect of Plasticizer on the Performance of the Surfactant-Selective Electrode Based on a Poly(Vinyl Chloride) Membrane with no Added Ion-Exchanger

The effect of different plasticizers in the sensing membrane on the performance of a surfactant ISE based on a PVC membrane with no added ion-exchanger was investigated. o-nitrophenyl octyl ether (NPOE), o-nitrophenyl decyl ether (NPDE), o-nitrophenyl dodecyl ether (NPDOE) and o-nitrophenyl tetradecyl ether (NPTE) were used as plasticizers. Electrodes based on NPDE, NPDOE and NPTE produced better results than NPOE-plasticized PVC membrane electrodes in terms of low detection limits. Electrodes based on NPDE, NPDOE and NPTE displayed a Nernstian slope in the concentration range of 10^–6 to 10^–2M. NPOE-plasticized PVC membrane electrodes displayed a Nernstian slope in the concentration range of 10^–5 to 10^–2M. The three electrodes other than the NPOE-plasticized PVC membrane electrode showed a similar performance to that of the NPOE-plasticized PVC membrane electrode concerning low detection limits and slope sensitivity. The four electrodes examined in this study are excellently selective for the dodecyltrimethylammonium ion over inorganic anions, but interference from other cationic surfactants such as tetradecyltrimethylammonium ions is significant. With respect to slope sensitivity, selectivity, response time and pH effect, the four electrodes showed a similar performance.     

Kinetic determination of codeine in pharmaceutical preparations

A kinetic method for the determination of codeine, based on its inhibitor action on the catalytic decomposition of hydrogen peroxide by cobalt(II), is presented. It has been found that the effect of codeine is most pronounced in the presence of 5% v/v ethylene glycol. The reaction is followed photometrically. Codeine can be determined in concentrations ranging from 0.80×10^–5 M to 2.4×10^–5 M. The method has been applied to the determination of codeine in pharmaceutical preparations.     

Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Ion-pair adsorption film colorimetry of iron (III) in water samples and human serum

The anionic chelate of iron(III)-2,2-dihydroxyazobenzene (H₂L), [FeL₂]^–, formed 1 1 ion-pair with crystal violet cation (CV⁺), CV⁺ [FeL₂]^–, and was adsorbed on a surface of transparent polyvinyl chloride (PVC) film plasticized with di-n-octyl phthalate. Enrichment of the blue violet species of the ion-pair onto the transparent PVC film has enabled a highly sensitive and simple method for the determination of iron(III). The detection limits are 1 × 10^–8 mol dm^–3 (0.6 ppb) by spectrophotometry at 592 nm, and 4 × 10^–8 mol dm^–3 (2 ppb) by visual colorimetry. The method has been successfully applied to the determination of iron in water samples and human serum. No preparatory procedures for the separation of serum protein and other coexisting substances are required, since ion-pair adsorption process provides a new method to prevent interference of serum matrix.     

Ion-pair adsorption film colorimetry — A new simple method for ppb level of aluminum ion in water sample

A new, highly sensitive and simple colorimetric method for trace aluminum(III) with 2,2-dihydroxyazobenzene, H₂L, is described, based on the ion-pair adsorption of the anionic Al chelate, [A1L₂ ^–, with crystal violet cation, CV⁺, on the surface of Polyvinylchloride film plasticized with dioctylphthalate. The blue violet species, CV⁺[A1L₂]^–, is enriched onto the transparent film, leading to a remarkable enhancement of the sensitivity, and the detection limits are 3 ng/ml by spectrophotometry and 5 ng/ml by visual colorimetry, respectively. Using spectrophotometer, a linear calibration curve is obtained over the concentration range of 0 to 50 ng/ml of Al. Further, the color system, consisting of red ([A1L₂]^–), yellow (H₂L), and blue violet (CV⁺), gave clear color changes suitable for visual determination of aluminum with an applicable range of 0 to above 3000 ng/ml. The four different color zones are khaki for 0–5 ng/ml, reddish-brown for 5–200 ng/ml, blue violet for 200 ng/ml-3g/ml, and colorless for more than 3g/ml. The proposed method has been successfully applied for the determination of aluminum in tap waters.     

3,3′,5,5′-Tetramethylbenzidme for the colorimetric determination of manganese in water

Manganese can be determined by colorimetry with previous oxidation of Mn(II) in a strong basic medium, using 3,3,5,5-tetramethylbenzidine as a chromogenic reagent. The molar absorptivity of the reaction product is 3.4 × 10⁴ mol^–1l cm^–1l, the detection limit 3 ng/ml, the RSD (0.5 mg/l,n = 8) 0.9% and the calibration range (1-cm cells) 0.02–0.8 mg/1 V(V), Cr(VI) and Co(II) are the most significant interferences. The new method was compared with an AAS procedure (air-acetylene flame) with previous solvent extraction and also with a colorimetric method for the determination of manganese in sea and drinking water.     

Determination of some trace elements in high-purity aluminium, zinc and commercial steel by AAS after preconcentration on amberlite XAD-1180 resin

The determination of trace metals, e.g. Bi, Cd, Pb, in high-purity aluminium, zinc and commercial steel by flame or graphite furnace atomic absorption spectrometry following their preconcentrations as iodo complexes on XAD-1180 resin by means of a short column system is described. The recoveries are quantitative (95%). The relative standard deviations varies between 6% and 10%. The relative errors are less than 8% in a concentration range of 1 × 10^–3 –4 × 10^–5%. Detection limits for flame AAS and GFAAS were in the ranges of 0.002–0.110 g/ml and 0.0003–0.004 g/ml or in the ranges of 0.08–4.40 g/g and 0.012–0.16 g/g with respect to the solid samples, respectively.     

Novel Nitrite Membrane Sensor Based on Cobalt(II) Salophen for Selective Monitoring of Nitrite Ions in Biological Samples

A novel PVC-based membrane sensor based on the Co(II)-salophen complex (CSC) is described. The electrode revealed a Nernstian response over a wide nitrite ion concentration range (1.0×10^–6–1.0×10^–1M). The detection limit of the sensor is 8.0×10^–7M. The best performance was obtained with a membrane composition of 33% PVC, 61% ortho-nitrophenyloctyl ether, 3% cobalt(II)-salophen, and 3% hexadecyltrimethylammonium bromide. The potentiometric response of the sensor is independent of the pH of solution in the pH range 4.5–11.9. The electrode exhibits a very fast response time and good selectivity over a variety of common inorganic and organic anions, including fluoride, bromide, iodide, sulfite, nitrate, thiocyanate, thriiodide and perchlorate. The selectivity behavior of the proposed sensor shows substantial improvements compared to the previously reported electrodes for nitrite ion. The membrane sensor can be used for at least 2 months without any divergence in potential. The electrode was successfully applied to the monitoring of nitrite ion in water, sausage, flour, wheat, cheese and milk.     

Spectrofluorimetric determination of trace amounts of Tb(III) using acetylacetone in ethanol solution

Summary The spectrofluorimetric determination of terbium(III) in ethanol (95%) solution of acetylacetone (3×10^–4 mol/l) was studied. Intensive fluorescence of terbium(III) (=545 nm) was observed after excitation of the system (=310 nm). The method proposed is satisfactory for the determination of terbium(III) in the range of 4 to 40 ng/ml (2.5×10^–8 to 2.5×10^–7 mol/l). The effect of other rare earths, common metal ions and anions upon the intensity of the fluorescence emitted by terbium(III) is discussed.

---

Spektrofluorimetrische Bestimmung von Tb(III)-Spuren mit Acetylaceton in Ethanollösung

     

Potentiometric Membrane Sensors for the Selective Determination of Pyridoxine Hydrochloride (Vitamin B6) in Some Pharmaceutical Formulations

The construction and general performance characteristics of two novel potentiometric PVC membrane sensors responsive to the pyridoxine hydrochloride known as vitamin B₆ (VB₆) are described. These sensors are based on the use of the ion-association complexes of the pyridoxine cation with molybdophosphate and tungstophosphate counter anions as ion pairs in a plasticized PVC matrix. The electrodes show a stable, near-Nernstian response for 6 × 10^–5–1 × 10^–2 M VB₆ at 25°C over the pH range 2–4 with a cationic slope of 54.0 ± 0.5 and 54.5 ± 0.4 mV per concentration decade for pyridoxine–molybdophosphate and pyridoxine–tungstophosphate, respectively. The two electrodes have the same lower detection limit (4 × 10^–5 M), and the response times are 45–60 and 30–45 s in the same order for both. Selectivity coefficients for VB₆ relative to a number of interfering substances were investigated. There is negligible interference from many cations, some vitamins, and pharmaceutical excipients. The determination of VB₆ in some pharmaceutical preparations using the proposed electrodes gave an average recovery of 98.0 and 99.0% of the nominal value and a mean standard deviation of 1.1 and 0.9% (n = 3) for pyridoxine–molybdophosphate and pyridoxine–tungstophosphate electrodes, respectively. The results compare favorably with data obtained by the British pharmacopoeia method.     

Primary amine drug sensitive electrodes based on macrocyclic polyethers with 2,2′-dinaphthyl subunits

Dinaphthyl macrocyclic polyethers were synthesized and used as neutral carriers for preparing primary amine drug sensitive PVC membrane electrodes. Contrary to the ion-associate based electrodes, which show an excellent potentiometric response to quaternary ammonium ions and the like, but a very poor response to primary amines, the macrocyclic polyether-based electrodes showed potentiometric response characteristics with primary amines preferred. Dinaphthyl macrocyclic polyether-based electrodes are superior to those based on common macrocyclic polyethers for their potentiometric selectivity coefficients much lower than those of the latter. The main characteristics of a dinaphthyl-20-crown-6-based benzyl amine sensitive electrode are as follows: linear response range, 4.2 × 10^–5 – 1.0 ×10^–1 M; slope, 51.3 mV/decade; and detection limit, 4.6 × 10^–6 M. A mexiletine sensitive electrode was prepared using dinaphthyl-23-crown-7 with following performance features: linear response range, 2.0 × 10^–5 – 1.0 ×10^–1 M; slope, 52.1mV/decade; and detection limit, 5.0 × 10^–6 M.     

Electrochemical behaviour of persulphate on carbon paste electrodes modified with Prussian blue and analogous compounds

Summary Peroxodisulphate (persulphate) may be determined by direct current voltammetry (DCV) using carbon paste electrodes chemically modified with Prussian Blue, iron(III)-hexacyanoruthenate(II) or iron(III)-hexacyano-osmate(II). The determination is based on the exploitation of catalytic currents from the reduction of the modifiers. Best results are obtained for iron(III)-hexacyanoosmate(II) yielding a detection limit of 1 g O ₂ ^2– /ml (as persulphate) when using HCl (10^–2 mol/l) as supporting electrolyte and measuring in the DCV-mode. Electrodes doubly-modified with the osmium compound and a liquid anion-exchanger (Amberlite LA2) allow determinations of persulphate after preconcentration under open circuit conditions, in the presence of hydrogen peroxide and perborate, with a detection limit of 20 ng O ₂ ^2– /ml (as persulphate).     

Applications of catalytic reactions. Kinetic microdetermination of W(VI) and V(V)

Summary Applications of Catalytic Reactions. Kinetic Microdetermination of W(VI) and V(V) A kinetic method is described for the microdetermination of tungsten and vanadium. The method is based on the catalytic action of tungstate and vanadate ions on the oxidation of 2,4-diaminophenol with hydrogen peroxide. The effect of reagent concentration is studied and the maximum tolerable amounts of interfering ions are determined. Procedures for the determination of 0.46 to 73.5g/ml tungsten are given with a relative error of about 1.5%. Quantities of 2.02·10^–2 to 2.5g/ml vanadium could be determined with a relative error of about 2%.Furthermore a kinetic determination of tungstate and vanadate ions in their mixtures is proposed.Part of PhD Thesis-University of Thessaloniki, 1975.     

Isotachophoretic analysis of the lipophilic cation tetraphenylphosphoniumbromide

Summary Tetraphenylphosphoniumbromide (TPP), a lipophilic cation used for the determination of plasma membrane potential, was quantified by isotachophoresis. The optimized leading electrolyte consisted of 10 mmol/l KOH as leading ion, supplemented with 0.5% hydroxy-ethylcellulose. The pH was adjusted to 9.5 with methionine. The terminating ion was 10 mmol/l tris(hydroxymethyl)-aminomethane (pH 9.2, adjusted with methionine). Leading ion concentrations of 10, 1 and 0.5 mmol/l respectively, showed nearly the same detection limits (2×10^–11 mol of TPP). This detection limit allowed the quantitative determination of TPP down to a concentration of 2 mol/l. Calibration curves in the range of 2×10^–11 to 1.5×10^–10 mol of TPP showed correlation coefficients greater than 0.95 (n=12; =0.01).     

Electrochemical behavior of a covalently modified glassy carbon electrode with aspartic acid and its use for voltammetric differentiation of dopamine and ascorbic acid

Aspartic acid was covalently grafted on to a glassy carbon electrode (GCE) by amine cation radical formation in the electrooxidation of the amino-containing compound. X-ray photoelectron spectroscopic (XPS) measurement and cyclic voltammetric experiments proved the aspartic acid was immobilized as a monolayer on the GCE. Electron transfer to Fe(CN)₆^4– in solution of different pH was studied by cyclic voltammetry. Changes in solution pH resulted in the variation of the charge state of the terminal group; surface pK_a values were estimated on the basis of these results. Because of electrostatic interactions between the negatively charged groups on the electrode surface and dopamine (DA) and ascorbic acid (AA), the modified electrode was used for electrochemical differentiation between DA and AA. The peak current for DA at the modified electrode was greatly enhanced and that for AA was significantly reduced, which enabled determination of DA in the presence of AA. The differential pulse voltammetric (DPV) peak current was linearly dependent on DA concentration over the range 1.8×10^–6–4.6×10^–4 mol L^–1 with slope (nA mol^–1 L) and intercept (nA) of 47.6 and 49.2, respectively. The detection limit (3) was 1.2×10^–6 mol L^–1. The high selectivity and sensitivity for dopamine was attributed to charge discrimination and analyte accumulation. The modified electrode has been used for determination of DA in samples, in the presence of AA, with satisfactory results.