The electronic behaviors of TiO2/MnO2/carbon clusters composite materials obtained by the calcination of a TiO(acac)2/Mn(acac)3/epoxy resin complex

The calcination of a TiO(acac)₂/Mn(acac)₃/epoxy resin complex under an oxygen atmosphere successfully produced nano-sized TiO₂/MnO₂/carbon clusters composite material. The surface characterizations of the resulting composites indicate that they are composed of nano-sized particles of TiO₂, MnO₂ and carbon clusters. ESR spectral examination suggests the possibility of an electron transfer in the process of MnO₂ → carbon clusters → TiO₂. The visible light-responsive oxidation–reduction function of the composite materials has also been confirmed.     

Visible light-sensitive MnO2- and CeO2-loaded ZrO2/carbon cluster/Pt nanocomposite materials

Nano-sized ZrO₂/carbon cluster composite materials (I_c’s) were successfully prepared by the calcination of ZrOCl₂/starch complex I. I_c’s were found to reduce methylene blue under the irradiation of visible light (λ > 460 nm). The materials obtained by calcining at 400 and 500 °C were selectively loaded with Pt particles to obtain Pt-loaded ZrO₂/carbon cluster composite materials denoted as I_c400Pt and I_c500Pt, respectively. In addition, the resultant materials were modified with MnO₂ and CeO₂ particles to achieve MnO₂- and CeO₂-loaded ZrO₂/carbon cluster/Pt composite materials denoted as I_c400PtMn, I_c500PtMn, I_c400PtCe and I_c500PtCe, respectively. The metal oxides-loaded ZrO₂/carbon cluster/Pt composite materials thus synthesized could decompose an aqueous silver nitrate solution by visible light irradiation to give Ag and O₂ with the [Ag]/[O₂] ratios of ca. 4. Visible light-irradiated water splitting examinations with I_c400PtMn and I_c400PtCe were also investigated and found to yield H₂ and O₂ with the [H₂]/[O₂] ratios of ca. 2.     

Hydrothermal synthesis of chalcopyrite CuInS2, CuInSe2 and CuInTe2 nanocubes and their characterization

CuInS₂, CuInSe₂ and CuInTe₂ nanocubes of chalcopyrite structure have been successfully synthesized by hydrothermal process using deionized water as solvent at 180 °C for 20 h. The crystallinity, compositional, morphological and optical properties of the synthesized samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), Raman and photoluminescence (PL) spectra analyses. The Raman spectra of the synthesized CuInS₂, CuInSe₂ and CuInTe₂ samples show the dominant A₁ modes at 293, 172 and 121 cm⁻¹ respectively. The possible chemical reaction and mechanism of nanocubes formation were discussed. The emission wavelength of as synthesized CuInS₂, CuInSe₂ and CuInTe₂ samples were blue shifted at 746 nm (1.66 eV), 863 nm (1.43 eV) and 859 nm (1.44 eV) respectively.     

Synthesis and characterization of self-assembled nanoenergetic Al-Fe2O3 thermite system

Nanothermite composites powders have superior exothermic characteristics and possess properties unobtainable by traditional micron-sized predecessors. In this paper, the reaction kinetics of a self-assembled Al-Fe₂O₃ thermite system are discussed and compared with conventional physical mixed references. Surfactant self-assembly allows an increase in interfacial contact area between Al and Fe₂O₃, which hastens the thermite reaction process to produce significant enhancement in the reaction kinetics. It was found that intimate mixing is a more important consideration for improving the combustion kinetics of thermite systems rather than the size of the individual components.     

Self-assembly of Sb2O3 nanowires into microspheres: Synthesis and characterization

Sb₂O₃ nanowires with diameters of ∼233 nm and microspheres assembled by these nanowires were successfully synthesized by a simple poly-(vinylpyrrolidone) (PVP) assisted hydrothermal method. The morphologies, nano/microstructures and optical properties of the as-grown nanowires and microspheres were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-vis diffuse reflection spectrum. It has been found that the experimental parameters, such as mineralizers, played crucial roles in the morphological control of Sb₂O₃ nanowires. The possible growth mechanism of microspheres has been proposed.     

Synthesis of nanocrystalline and mesoporous zinc sulphide from a single precursor Zn(SOCCH3)2Lut2 complex

We report the formation of mesoporous zinc sulphide, composed by the fine network of nanoparticles, which was formed via a single precursor Zn(SOCCH₃)₂Lut₂ complex. The complex was chemically synthesized using zinc carbonate basic, 3,5-lutidine and thioacetic acid, in air. The metal precursor complex was characterized using different conventional techniques. Thermogravimetric analysis (TGA) result indicates that the decomposition of the complex starts at 100 °C and continues up to 450 °C, finally yielding ZnS. ZnS nanocrystals were characterized by powder X-ray diffraction (XRD) technique, field emission scanning electron microscopy (FESEM), N₂-sorption isotherm, UV-vis spectroscopy and photoluminescence (PL) spectroscopy. The grain diameter of nanocrystals was found to be 4-5 nm. The material followed Type-IV N₂-sorption isotherm, which is the characteristic of mesoporous materials. The band gap energy, as obtained from optical measurements was around 3.8 eV.     

Optical properties of new photovoltaic materials: AgCuO2 and Ag2Cu2O3

AgCuO₂ and Ag₂Cu₂O₃ are new types of semiconductor materials. A theoretical study is presented for both the electronic and optical properties of these new photovoltaic materials in the framework of density functional theory (DFT). The calculated cohesive energy is −3.606 eV/atom and −3.723 eV/atom for Ag₂Cu₂O₃ and AgCuO₂, respectively. Electronic calculations indicate that AgCuO₂ is a small band gap semiconductor and Ag₂Cu₂O₃ is metallic in nature. The valency state of Cu is divalent in Ag₂Cu₂O₃ and trivalent in AgCuO₂. The largest absorption coefficient of CuO₂ is 332 244, which is significantly greater than that of CuInSe₂, CdTe, GaAs, etc.     

Synthesis and characterization of Co3O4 nanorods by thermal decomposition of cobalt oxalate

Cobalt oxalate was used as a precursor to prepare Co₃O₄ nanorods by thermal decomposition. The combinations of triphenylphosphine and oleylamine were added as surfactants to control the morphology of the particles. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The diameters of Co₃O₄ nanorods are 20 nm and the average lengths are around 500 nm. The hysteresis loops of the obtained samples reveal the ferromagnetic behaviors, the enhanced coercivity (H_c) and decreased saturation magnetization (M_s) in contrast to their respective bulk materials. The study provides a simple and efficient route to synthesize Co₃O₄ nanorods at low temperature.     

TiO2/carboxylate-rich porous carbon: A highly efficient visible-light-driven photocatalyst based on the ligand-to-metal charge transfer (LMCT) process

A novel visible-light-driven photocatalyst based on TiO₂/carboxylate-rich porous carbon composite (TiO₂/CRPC) was successfully synthesized by low temperature carbonization process in air. Sodium gluconate plays a crucial role in the formation of TiO₂/CRPC. Different functional groups of sodium gluconate play synergetic roles in the formation of TiO₂/CRPC. XRD and Raman spectra studies indicated that there are two different TiO₂ crystalline phases existing in TiO₂/CRPC, which are anatase and brookite, and the CRPC is amorphous. Via FT-IR and XPS spectra investigations, it was demonstrated that carboxylate group, the ligand-to-metal charge transfer (LMCT) forming functional group, was solidified into the CRPC and form the LMCT complex on TiO₂ surface through the fabrication of TiO₂/CRPC. Compared with the pure TiO₂, TiO₂/CRPC exhibit enhanced absorption in the UV and visible light region around 260–600 nm. The strong absorption in the visible light region gives TiO₂/CRPC advantages over pure TiO₂ for the degradation of organic pollutants. TiO₂/CRPC can activate O₂ in air under mild conditions and exhibit excellent visible-light-driven photocatalytic activities. However, TiO₂/C composite obtained by using glucose instead of sodium gluconate exhibits poor photocatalytic activity, which demonstrated that carboxylate–TiO₂ complexes are responsible for the prominent photocatalytic properties of TiO₂/CRPC under visible light irradiation.     

Electronic structure and transport of Ca3Co2O6 and Ca3CoNiO6

We have calculated the band structure of Ca₃Co₂O₆ and Ca₃CoNiO₆ by using the self-consistent full-potential linearized augmented plane-wave method within density function theory and the generalized gradient approximation for the exchange and correlation potential. The spin-orbit interaction is incorporated in the calculations using a second variational procedure. The relation of these band structure calculations to thermoelectric transport is discussed. The results illustrate that transport is highly anisotropic with much larger mobility in the a-b plane than out of the a-b plane, and the introduction of Ni in Ca₃Co₂O₆ alters its electronic structure and its thermoelectric transport properties.     

Solvothermal preparation and characterization of nanocrystalline Bi2Te3 powder with different morphology

Bi₂Te₃-based alloys are currently best-known, technological important thermoelectric materials near room temperature. In this paper, nanocrystalline Bi₂Te₃ with different morphologies was synthesized by a solvothermal process based on the reaction between BiCl₃, Te, and KBH₄ in N,N-dimethylformamide at 100-180 °C. KBH₄ was used as a reducing agent. The products were characterized by X-ray diffraction and transmission electron microscopy (TEM). The particle morphologies and size are dependent on the reaction temperature and time. A possible formation mechanism is proposed.     

The effect of the Bi source on optical properties of Bi2Te3 nanostructures

nanostructures were synthesized by using different Bi sources via a simple solvothermal process, in which and BiCl₃ were used as the Bi sources. Optical properties of nanostructures prepared with and BiCl₃ as the Bi sources were investigated by micro-Raman spectroscopy. The Raman scattering spectrum of hexagonal nanoplates prepared by using as the Bi source shows that the infrared (IR) active mode A_1u, which must be odd parity and is Raman forbidden for bulk crystal due to its inversion symmetry, is greatly activated and shows up clearly in the Raman scattering spectrum. We attribute the appearance of the infrared active A_1u mode in the Raman spectrum to crystal symmetry breaking of hexagonal nanoplates. However, the Raman scattering spectrum of nanostructures with irregular shape prepared by using as the Bi source only exhibits the two characteristic Raman modes of crystals. Micro-Raman measurements on nanostructures with different morphologies offer us a potential way to tailor optical properties of nanostructures by controlling the morphologies of the nanostructures, which is very important for practical applications of nanostructures in thermoelectric devices.     

Optical and photocatalytic properties of nanocrystalline TiO2 synthesised by solid-state chemical reaction

Nanoparticulate TiO₂ is of interest for a variety of technological applications, including optically transparent UV-filters and photocatalysts for the destruction of chemical waste. The successful use of nanoparticulate TiO₂ in such applications requires an understanding of how the synthesis conditions effect the optical and photocatalytic properties. In this study, we have investigated the effect of heat treatment temperature on the properties of nanoparticulate TiO₂ powders that were synthesised by solid-state chemical reaction of anhydrous TiOSO₄ with Na₂CO₃. It was found that the photocatalytic activity increased with the heat treatment temperature up to a maximum at 600 °C and thereafter declined. In contrast, the optical transparency decreased monotonically with the heat treatment temperature. These results indicate that solid-state chemical reaction can be used to prepare powders of nanoparticulate TiO₂ with properties that are optimised for use as either optically transparent UV-filters or photocatalysts.     

Synthesis process and the luminescence properties of rare earth doped NaLa(WO4)2 nanoparticles

Rare earth doped NaLa(WO₄)₂ nanoparticles have been prepared by a simply hydrothermal synthesis procedure. The X-ray diffraction (XRD) pattern shows that the Eu³⁺-doped NaLa(WO₄)₂ nanoparticles with an average size of 10-30 nm can be obtained via hydrothermal treatment for different time at 180 °C. The luminescence intensity of Eu³⁺-doped NaLa(WO₄)₂ nanoparticles depended on the size of the nanoparticles. The bright upconversion luminescence of the 2 mol% Er³⁺ and 20 mol% Yb³⁺ codoped NaLa(WO₄)₂ nanoparticles under 980 nm excitation could also be observed. The Yb³⁺-Er³⁺ codoped NaLa(WO₄)₂ nanoparticles prepared by the hydrothermal treatment at 180 °C and then heated at 600 °C shows a 20 times stronger upconversion luminescence than those prepared by hydrothermal treatment at 180 °C or by hydrothermal treatment at 180 °C and then heated at 400 °C.     

Aqueous synthesis and enhanced photocatalytic activity of ZnO/Fe2O3 heterostructures

We report a facile synthesis of ZnO/Fe₂O₃ heterostructures based on the hydrolysis of FeCl₃ in the presence of ZnO nanoparticles. The material structure, composition, and its optical properties have been examined by means of transmission electron microscopy, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and diffuse reflectance UV–visible spectroscopy. Results obtained show that 2.9 nm-sized Fe₂O₃ nanoparticles produced assemble with ZnO to form ZnO/Fe₂O₃ heterostructures. We have evaluated the photodegradation performances of ZnO/Fe₂O₃ materials using salicylic acid under UV-light. ZnO/Fe₂O₃ heterostructures exhibited enhanced photocatalytic capabilities than commercial ZnO due to the effective electron/hole separation at the interfaces of ZnO/Fe₂O₃ allowing the enhanced hydroxyl and superoxide radicals production from the heterostructure.     

Crystal structure, electronic and transport properties of AgSbSe2 and AgSbTe2

Undoped and p- and n-doped AgSbX₂ (X=Se and Te) materials were synthesized by direct fusion technique. The structural properties were investigated by X-ray diffraction and SEM microscopy. The electrical conductivity, thermal conductivity and Seebeck coefficient have been measured as a function of temperature in the range from 300 to 600 K.To enlighten electron transport behaviours observed in AgSbSe₂ and AgSbTe₂ compounds, electronic structure calculations have been performed by the Korringa-Kohn-Rostoker method as well as KKR with coherent potential approximation (KKR-CPA) for ordered (hypothetical AgX and SbX as well as AgSbX₂ approximates) and disordered systems (Ag_1−xSb_xX), respectively. The calculated density of states in the considered structural cases shows apparent tendencies to opening the energy gap near the Fermi level for the stoichiometric AgSbX₂ compositions, but a small overlap between valence and conduction bands is still present. Such electronic structure behaviour well agrees with the semimetallic properties of the analyzed samples.     

Formation of Si nanowires by the electrochemical reduction of porous Ni/SiO2 blocks in molten CaCl2

Silicon nanowires (SiNWs) were prepared by the electrochemical reduction of solid Ni/SiO₂ blocks in molten CaCl₂ at 1173 K. The SiNWs have diameter distributions ranging from 80 to 350 nm, and the nickel–silicon droplets are found on the tips of the nanowires. The growth mechanism of SiNWs was investigated, which confirmed that the nano-sized nickel–silicon droplets formed at the Ni/SiO₂/CaCl₂ three-phase interline. The droplets lead to the oriented growth of SiNWs. Formation of nano-sized nickel–silicon droplets suggests that this method could be a potential way to produce nano-sized metal silicides.     

Facile synthesis and electrochemical properties of hierarchical MnO2 submicrospheres and LiMn2O4 microspheres

Hierarchical MnO₂ submicrospheres have been successfully synthesized by a wet chemical method. The as-prepared products were characterized by means of XRD, SEM, FTIR, TG, and TEM. With the as-prepared MnO₂ submicrospheres as precursors, LiMn₂O₄ microspheres were conveniently prepared by a simple solid-state reaction between MnO₂ and LiOH at a temperature as low as 600 °C. Electrochemical properties of the as-prepared MnO₂ submicrospheres and LiMn₂O₄ microspheres as cathode materials in lithium ion cells were investigated by galvanostatic charge/discharge tests.     

Preparation and characterization of SrSnO3 nanorods

Perovskite strontium stannate (SrSnO₃) nanorods were prepared by annealing the precursor SnSr(OH)₆ nanorods at 600 °C for 3 h. The precursor nanorods were hydrothermally synthesized at 160 °C for 16 h using Sr(NO₃)₂ and SnCl₄·5H₂O as starting materials in the presence of surfactant cetyltrimethyl ammonium bromide (CTAB). As-prepared samples were characterized by X-ray diffraction (XRD), thermogravimetric-differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and infrared ray spectroscopy (IR). The results show that the as-synthesized powders are made of SrSnO₃ one-dimensional nanorods of about 0.2-1 μm length and 100-150 nm diameter. Possible formation mechanism of SrSnO₃ with nanorod structure under certain conditions was preliminarily analyzed, in which it was thought that CTAB played an important role in the formation process of the nanorod structure. Electrochemical performance of the samples versus Li metal was also evaluated for possible use in lithium-ion batteries.     

Some crystallography,chemistry, physics,and thermodynamics of B12O2, B12P2, B12As2, and related alpha-boron type crystals

This paper shows that several alpha-boron type compounds may be useful as high-temperature semiconductors with decent carrier motilities, high electrical resistivity, good optical transparency, good stability under high radiation bombardment, and possess high neutron capture cross-sections. The most promising are B₁₂O₂, B₁₂P₂, and B₁₂As₂. Their relationship to alpha-boron, B₁₃C₂, and other derivative crystals is explained. A study of their chemical and thermodynamic properties indicates how single crystals useful for electronic devices can be grown.