Nonlinear-optical modulator for high-power fiber lasers

We propose a novel nonlinear-optical fiber modulator for high-power (>1-W) single-mode fiber lasers. The device is based on transferring the amplitude modulation from a low-power signal at the Stokes frequency onto a high-power beam through stimulated Raman scattering. The efficiency and limitations of the Raman modulator when highly Ge-doped fiber is used is considered. An insertion loss of less than 0.4 dB and an extinction ratio of 20 dB are predicted for modulation of a 10-W single-mode Nd-doped fiber laser.     

光的单边带传输的性能研究

对一种光单边带传输系统用MATLAB进行了仿真,结果表明：在完全消光条件下,10Gb/s单边带信号在常规单模光纤传输可达140 km, 而双边带仅为70 km;消光比对双边带传输和单边带传输的影响是不一样的. 双边带传输消光比为10 dB就够了, 单边带传输消光比要在20 dB以上,只有消光比大于20 dB时单边带传输相对于双边带传输的优越性才逐渐呈现出来.     

用于10Gb/s传输系统的电吸收调制器与分布反馈激光器集成光源

采用超低压(22×１０^２Pa)选择区域生长(selective area growth, SAG)金属有机化学气相沉积(metal-organic chemical vapor deposition, MOCVD)技术成功制备了应变型InGaAsP/InGaAsP电吸收调制器(electroabsorption modulator, EAM)与分布反馈激光器(distribute feedback laser, DFB)单片集成光源的新型光电器件.实验结果表明，采用该技术制备的集成器件表现出了良好的性能：激射阈值为19 mA，出光功率接近7 mW，边模抑制比(side-mode suppression ratio, SMSR)大于40 dB，将该集成器件出射光耦合进普通单模光纤后进行测量，获得了16 dB的消光比，器件3 dB响应带宽达到了10 GHz以上.将该集成器件完全封装后成功进行了10 Gb/s非归零码(non-return zero, NRZ)的传输实验：在误码率为10^-10的传输条件下于普通单模光纤中传输了53.3 km，色散代价小于1.5 dB，动态消光比大于8 dB，且眼图清晰张开. 关键词： 超低压 选择区域生长 集成光电子器件 10 Gb/s     

Picosecond flat-top pulse generation using dual-mode fiber Mach-Zehnder interferometers

We report on an optical fiber Mach-Zehnder interferometer made by offset splicing a dual-mode fiber with two single-mode fibers. The extinction ratio can be tuned from less than 1 dB to greater than 28 dB by rotating the dual-mode fiber along its axial direction. The interferometer is utilized as a pulse shaper to convert a 2.5 ps Gaussian pulse to a 5.2 ps flat-top pulse.     

Study of in-line single-mode optical fiber polarizer

The theoretical calculation method of multilayer metal-clad planar optical waveguide presented by Y. YAMAMOTO is greatly improved and transplant into the optical fiber and a suitable waveguide model of in-line single-mode optical fiber polarizer is set up to study its characteristics, the theorical analyses are in accordance with the experimental re suits. The polarizer whose extinction ratio is more than 30 dB at 0.633μm wavelength with an insertion loss of 0.5 dB is formed by grinding off the cladding on one side of a single-mode fibre and evaporating metal onto the polished durface in our Lab.     

Fabrication of tapered fiber based ring resonator

Tapered fiber based ring resonators are fabricated and its optical characteristic is investigated in detail. The ring resonator is fabricated by coiling the tapered fiber, which is firstly made by heating and stretching a piece of optical fiber, after the polymer protective cladding has been removed The comb filter with a constant free spectral range (FSR) and the maximum extinction ratio of 4.2 dB is achieved by a single-mode fiber based ring resonator. The FSR of ring resonator can be adjusted by controlling the diameter of the ring. The extinction ratio is improved in the polarization maintaining fiber based ring resonator where the maximum extinction ratio of 14 dB is achieved at 1531 nm region.     

In-fiber polarizer based on a long-period fiber grating written on photonic crystal fiber

A novel in-fiber polarizer based on a long-period fiber grating (LPFG) is written by using a focused CO2 laser beam to notch a photonic crystal fiber periodically. Such a polarizer exhibits a high polarization extinction ratio of more than 20 dB over a wide wavelength range of ~11 nm near 1550 nm and a very low temperature sensitivity of 3.9 pm/ degrees C, which overcomes the disadvantages of the temperature sensitivity of other in-fiber polarizers created on conventional single-mode fiber.     

Amplification of 12 × 10 Gb/s WDM signals with negligible FWM crosstalk in a double-pumped fiber optical parametric amplifier

We report on the amplification of 12 × 10 Gb/s wavelength-division-multiplexed signals by a double-pumped fiber optic parametric amplifier (2P-FOPA). A gain of 10 dB is obtained using a 4.3 km-long conventional dispersion shifted fiber (DSF) as nonlinear medium. Our spectra show negligible generation of spurious FWM products, and we attribute this to the small variations of the zero-dispersion wavelength of the DSF. The 2P-FOPA performance is assessed through Q-factor measurements, and we show that for output powers per channel ranging from −15 to 3 dBm the power penalty is less than 0.5 dB.     

Single-mode plane-polarized ytterbium-doped large-core fiber laser with 633-W continuous-wave output power

We demonstrate a cladding-pumped single-mode plane-polarized ytterbium-doped fiber laser generating 633 W of continuous-wave output power at 1.1 microm with 67% slope efficiency and a polarization extinction ratio better than 16 dB. The laser is end pumped through both fiber ends and shows no evidence of roll-over, even at the highest output power, which is limited only by the available pump power.     

新型单模光纤偏振器

本文介绍了新型D型微孔单模光纤偏振器的制作工艺及其性能参数。其工作波长为1.3μm,光纤偏振器的消光比优于40dB,插入损耗≤2.5dB.制作工艺较为简单,温度变化对器件的影响小,稳定性好,工作波长范围宽。     

Polarization-maintaining, double-clad fiber amplifier employing externally applied stress-induced birefringence

We report a new approach to obtaining linear-polarization operation of a rare-earth-doped fiber amplifier in which the gain fiber is coiled under tension to induce birefringence. We demonstrated this method by constructing an Er/Yb-doped, double-clad, single-mode fiber amplifier with an output power of 530 mW and a polarization extinction ratio of >17 dB (when seeded with linearly polarized light) at a wavelength of ~1.5 microm . The technique is achromatic, permits single- or multiple-pass operation of the amplifier, requires no additional components in the optical path, leaves the fiber ends unobstructed, and is inexpensive to implement.     

Single-polarization single-mode hollow-core negative curvature fiber with nested U-type cladding elements

Hollow-core negative curvature fibers (HC-NCFs) have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions. In this work, a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed. To achieve the single-polarization single-mode transmission, we use two different silica tubes in thickness, which satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes, respectively. Besides, the elliptical elements are introduced to achieve good single-mode performance. By studying the influences of the structure parameters on the propagation characteristics, the optimized structure parameters are obtained. The simulation results show that when the wavelength is fixed at 1550 nm, the single-polarization single-mode transmission is achieved, with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174. Furthermore, the confinement loss is only 0.0015 dB/m.     

Low bending loss and effectively single-mode all-solid photonic bandgap fiber with an effective area of 650 μm2

A large-mode-area all-solid photonic bandgap fiber with a seven-cell core and five high-index rod rings is investigated. Numerical simulations show that an effective area of more than 500 μm(2), a bending loss of less than 0.1 dB/m at a bending radius of 10 cm and effectively single-mode operation can be achieved simultaneously. A core diameter of 44.8 μm and an effective area of 650 μm(2) at 1064 nm are achieved in a fabricated fiber. Bending loss at 1064 nm is 0.09 dB/m at a bending radius of 7 cm. Effectively single-mode operation is also realized at a bending radius of 10 cm.     

1.3μm波长光纤偏振参数自动测试仪

本文介绍一种用于1.3μm波长的光纤偏振参数自动测试仪。它利用光路集成封装和计算机自动控制及信号处理等关键技术,方便、可靠、自动地进行1.3μm光纤及其器件偏振参数的测试,对于消光比为40dB以下的偏振态测量,误差优于0.3dB.     

基于谐振吸收效应的单模单偏振光子晶体光纤研究

提出了一种基于谐振吸收效应的单模单偏振光子晶体光纤，阐述了其工作原理，并利用全矢量有限元法对其模场分布、限制损耗、工作带宽、消光比等基本特性进行了数值模拟. 数值结果表明这种结构可以获得很高的单模单偏振工作带宽，并能以较低的损耗代价实现极高的消光比.讨论了结构设计参量对光纤性能的影响.研究结果对设计新型的高性能单模单偏振光纤具有一定的指导意义.     

GaAs／GaAlAs脊型波导交变式Δβ耦合器

研制了具有肖特基势垒电极的ＧａＡｓ／ＧａＡｌＡｓ双异质结脊型波导交变式Δβ耦合器．通过合理设计器件结构，降低波导层中载流子浓度和上、下包层中Ａｌ的含量，以及采用反应离子刻蚀和剥离等技术，使器件总损耗降为１０ｄＢ，消光比为２６．８ｄＢ，器件在１．３μｍ下实现单模工作．     

Experimental research of temperature sensor based on twin-core fiber

A low-cost, compact, and lossless temperature sensor based on a twin-core fiber (TCF) is demonstrated and manufactured by splicing two single-mode fibers to the ends of a TCF. The extinction ratio of the comb transmission spectrum is bigger than 15 dB, and the temperature sensitivity of the coupling angle is –0.02 rad/(°C· m) at–30–90°C and –0.032 rad/(°C· m) at 90–175°C. Finite element method is used to calculate the supermodes of the TCF, and the result agrees well with the experiment.     

TE/TM-mode pass polarizers and splitter based on an asymmetric twin waveguide and resonant coupling

A new passive TE/TM-mode polarization filter for an InP system based on an asymmetric twin waveguide and resonant coupling is investigated. Linear taper sections with different taper angles are introduced to couple between the two vertically separated waveguides. The underlying waveguide is designed to enable direct edge coupling from an optical fiber. At a wavelength of 1.55?μm power extinction ratios of 20 dB for the TE- and more than 10 dB for the TM-polarization are reported for devices shorter than 400?μm. An increased extinction ratio can be obtained by concatenating structures. Furthermore, we show this concept can be expanded to a polarization splitter.     

超低压选择区域生长法制备产生10GHz重复率超短光脉冲的级联电吸收调制器与分布反馈激光器单片集成光源

采用超低压(22×１０^２Pa)选择区域生长(selective area growth, SAG)金属有机化学气相沉积(metal-organic chemical vapor deposition, MOCVD)技术成功制备了InGaAsP/InGaAsP 级联电吸收调制器(electroabsorption modulator, EAM)与分布反馈激光器(distributed feedback laser, DFB)单片集成光源的新型光电器件.实验结果表明，采用该技术制备的器件 关键词： 超低压 选择区域生长 集成光电子器件 超短光脉冲     

新型全固态准晶体结构大模场光纤特性研究

大模场单模光纤在高功率激光器、高功率光传输和高灵敏度传感器等领域具有重要意义.设计了一种新型超低损耗大模场单模光纤,包层空气孔由掺氟硅玻璃棒代替,掺氟硅玻璃棒排列呈六重准晶体结构.基于有限元法对光纤的传输特性进行了数值模拟.研究了光纤结构参量变化对模式特性和有效模场面积的影响.结果表明:波长在1064 nm处,有效模场面积高达5197μm2,基模的限制性损耗低于10-5dB/km,解决了大模场与低损耗之间的冲突;在1064—2000 nm波段内,基模与二阶模的限制性损耗相差7个量级,实现单模传输;半径为10 cm时,弯曲损耗小于0.01 dB/m,具有良好的低弯曲损耗特性.此光纤能够提高光纤热损伤阈值,减少接续损耗,全固态结构有效避免了空气孔塌陷,简化制备工艺,对高功率激光传输、光纤激光器和光纤放大器的发展具有重要意义.