Exploding wires in air and vacuum

An apparatus for studies of wire explosions in air at atmospheric as well as reduced pressures is described. A theoretical treatment of the discharge circuit is presented. In this treatment the external resistance and inductance as well as the wire inductance (all as functions of time) have been taken into consideration. It is then possible to calculate the wire variables — current, resistance, resistive voltage drop, effect, and energy input — as functions of time from thedI/dt waveform experimentally obtained. Wire variables of Ni- and W-wires exploded both in air and vacuum are presented as well as a discussion of these.     

Multivariate analysis of dynamical processes

The analysis of multi-dimensional biomedical systems requires analysis techniques, which are able to deal with multivariate data consisting of both time series as well as point processes. Univariate and bivariate analysis techniques in the frequency domain for time series and point processes are established and investigated, although the number of investigations is strongly biased towards time series. Actual multivariate techniques for time series or hybrids of time series and point processes are scarcely addressed. Here, we present spectral analysis techniques which are able to analyse point processes as well as time series. Thereby, univariate, bivariate as well as multivariate techniques are discussed. Applications to simulated as well as real-world data reveal the abilities of the proposed techniques.     

Multiple pure tone noise prediction

This paper presents a fully numerical method for predicting multiple pure tones, also known as “Buzzsaw” noise. It consists of three steps that account for noise source generation, nonlinear acoustic propagation with hard as well as lined walls inside the nacelle, and linear acoustic propagation outside the engine. Noise generation is modeled by steady, part-annulus computational fluid dynamics (CFD) simulations. A linear superposition algorithm is used to construct full-annulus shock/pressure pattern just upstream of the fan from part-annulus CFD results. Nonlinear wave propagation is carried out inside the duct using a pseudo-two-dimensional solution of Burgers? equation. Scattering from nacelle lip as well as radiation to farfield is performed using the commercial solver ACTRAN/TM. The proposed prediction process is verified by comparing against full-annulus CFD simulations as well as against static engine test data for a typical high bypass ratio aircraft engine with hardwall as well as lined inlets. Comparisons are drawn against nacelle unsteady pressure transducer measurements at two axial locations as well as against near- and far-field microphone array measurements outside the duct.     

Evidence for a role of glutamate as an efferent transmitter in taste buds

Background  

Glutamate has been proposed as a transmitter in the peripheral taste system in addition to its well-documented role as an umami taste stimulus. Evidence for a role as a transmitter includes the presence of ionotropic glutamate receptors in nerve fibers and taste cells, as well as the expression of the glutamate transporter GLAST in Type I taste cells. However, the source and targets of glutamate in lingual tissue are unclear. In the present study, we used molecular, physiological and immunohistochemical methods to investigate the origin of glutamate as well as the targeted receptors in taste buds.     

Cosmic string in the NUT-Kerr-Newman spacetime

We study the equilibrium configurations of a cosmic string described by the Nambu action in the NUT-Kerr-Newman spacetime which includes as special cases the Kerr-Newman black hole spacetime as well as the NUT spacetime which is considered as a cosmological model. In this study it is interesting to note that one can obtain parallel results for the Kerr-Newman black hole as well as the NUT spacetime.     

Simulating feedback and reversibility in substrate-enzyme reactions

We extend discrete event models (DEM) of substrate-enzyme reactions to include regulatory feedback and reversible reactions. Steady state as well as transient systems are modeled and validated against ordinary differential equation (ODE) models. The approach is exemplified in a model of the first steps of glycolysis with the most common regulatory mechanisms. We find that in glycolysis, feedback and reversibility together act as a significant damper on the stochastic variations of the intermediate products as well as for the stochastic variation of the transit times. This suggests that these feedbacks have evolved to control both the overall rate of, as well as stochastic fluctuations in, glycolysis.     

Facile fabrication of a lotus-effect composite coating via wrapping silica with polyurethane

A lotus-effect coating was fabricated by wrapping micro-silica and nano-silica with polyurethane (PU) and subsequent spraying. The coating shows the similar self-cleaning property as lotus leaves: the contact angle is as large as 168° and the sliding angle is as low as 0.5°. Surface morphology of the coating was studied with scanning electron microscopy and atomic force microscopy. The composite coating shows the similar structure as lotus leaves.     

The pathogenesis of Randall's plaque: a papilla cartography of Ca compounds through an ex vivo investigation based on XANES spectroscopy

At the surface of attached kidney stones, a particular deposit termed Randall's plaque (RP) serves as a nucleus. This structural particularity as well as other major public health problems such as diabetes type‐2 may explain the dramatic increase in urolithiasis now affecting up to 20% of the population in the industrialized countries. Regarding the chemical composition, even if other phosphate phases such as whitlockite or brushite can be found as minor components (less than 5%), calcium phosphate apatite as well as amorphous carbonated calcium phosphate (ACCP) are the major components of most RPs. Through X‐ray absorption spectroscopy performed at the Ca K‐absorption edge, a technique specific to synchrotron radiation, the presence and crystallinity of the Ca phosphate phases present in RP were determined ex vivo. The sensitivity of the technique was used as well as the fact that the measurements can be performed directly on the papilla. The sample was stored in formol. Moreover, a first mapping of the chemical phase from the top of the papilla to the deep medulla is obtained. Direct structural evidence of the presence of ACCP as a major constituent is given for the first time. This set of data, coherent with previous studies, shows that this chemical phase can be considered as one precursor in the genesis of RP.     

Fluorescence Properties of Selected Benzo[c]phenanthridines

The fluorescence properties of selected benzo[c]phenanthridines (BPs) were examined. The effect of structure, pH and solvent on the fluorescence properties has been investigated. It was found out that the presence of charged iminium nitrogen significantly decreased the fluorescence of the compounds. The fluorescence (intensity as well as emission spectra shape) of the investigated compounds was significantly dependent on pH as well as used solvent. The utilization in epigenetic modification mechanisms studies as demethylase probe and as possible pH indicator was suggested.     

Defect structure and electrical properties of molybdenum disulphide

Electrical conductivity of molybdenum disulphide was studied in a helium-sulphur gas mixture as a function of temperature (1073-1273 K). It was found that over the whole temperature and sulphur pressure range (10-6600 Pa) studied, the material exhibits p-type conductivity. Based on literature intrinsic electronic disorder data as well as measured electrical conductivity results a defect model has been proposed. This model involves electron holes and doubly ionized interstitial sulphur ions as majority point defects as well as electrons and acceptor-type foreign ions as minority defects.     

Femtosecond self mode locking of Yb:fluoride phosphate glass laser

Passive cw mode locking of an ytterbium-doped fluoride phosphate glass laser is demonstrated, for what we believe to be the first time, based solely on the Kerr effect in the active medium in a resonator with dispersion compensation. Nearly bandwidth-limited pulses as short as 160fs are generated at ~1040 nm. We obtain average output powers as high as 250mW at 170-MHz repetition rate with absorbed pump power as low as 1.2W.     

分光光度法同时测定铝(Ⅲ)和铁(Ⅱ)

以甲基百里酚蓝(MTB)为显色剂、CTMAB为增溶增敏剂,利用系数补偿和双峰双波长的两次分光光度法同时测定铝(Ⅲ)和铁(Ⅱ)的结果令人满意.     

500 kV全固态Marx发生器

500 kV全固态Marx发生器采用Z型电路结构,以28个最大工作电压达22 kV、满载最高连续重复运行频率达200 Hz的绝缘栅双极型晶体管组件作为脉冲控制开关,采用以金属化膜电容器和线绕电感构成的梯形脉冲形成网络作为储能和脉冲形成器件。目前已实现500 kV脉冲输出,在50 Hz的重复频率下实现数十个脉冲的猝发输出。该发生器的输出脉冲电压峰值与已有文献报道的最高功率固态Marx发生器技术指标相近,输出脉冲电流峰值提高1倍,达到1000 A,发生器输出脉冲功率峰值达到500 MW。在采用电容器作为储能元件时,此Marx发生器输出脉冲宽度可在3～10 s范围内连续调整。     

Exact solution of finite size Mean Field Percolation and application to nuclear fragmentation

Random Graphs and Mean Field Percolation are two names given to the most general mathematical model of systems composed of a set of connected entities. It has many applications in the study of real life networks as well as physical systems. The model shows a precisely described phase transition, but its solution for finite systems was yet unresolved. However, atomic nuclei, as well as other mesoscopic objects (e.g. molecules, nano-structures), cannot be considered as infinite and their fragmentation does not necessarily occur close to the transition point. Here, we derive for the first time the exact solution of Mean Field Percolation for systems of any size, as well as provide important information on the internal structure of Random Graphs. We show how these equations can be used as a basis to select non-trivial correlations in systems and thus to provide evidence for physical phenomena.     

Continuing Studies of Plasma Erosion Switches for Power Conditioning on Multiterawatt Pulsed Power Accelerators

Recent PITHON experiments with plasma erosion switches (PES) have extended the range of operation of the switches by about 50 percent, in terms of closed time and charge passing through the switch. The quantity of charge passed through the switch has been increased to as much as 35 mC. Currents as large as 1 MA and voltages as great as 1.8 MV have been switched off to be diverted to a downstream load. The impedance of the erosion switch can be described as having three stages: 1) essentially zero impedance, 2) a transitional opening phase, and 3) an impedance which is very large (greater than 5 ?) in comparson with the subohm downstream load. Current diagnostics, consisting of Rogowski coils and segmented shunts, have been successfully developed to monitor the current which propagates to the load region. These monitors have measured rise times as short as 38 ns and slew rates as great as 1014 A/s at the load. With wire array loads, the pulse conditioning of the switch has been observed to reduce the magnitude of the current losses in the feed which are present when no switch is used. Correlations have been made between the switch closed time, voltage, current, and power with the feed inductance and the generator power injected into the magnetic insulated transmission line (MITL).     

近红外光谱定性分析中的特征波长筛选研究

提出了一种以样品光谱类间相关系数之和最小为准则进行光谱波长逐步筛选的方法(stepwise selection basing on minimum sum of correlation coefficients, SMCC),以类间距离与类内距离和的比值最大化(符合分析者主观预期目标)作为定性分析中特征波长筛选效果的评价依据,并使用红塔集团提供的2012年17种不同类型工业分级烟叶作为试验样品,以验证筛选方法的有效性。研究表明,采用CO1分级烟叶光谱作为参照类别,筛选出10个特征波长点：采用特征波长计算得到的类内欧氏距离的平均值为采用全部波长计算得到的平均值的1.69倍,采用特征波长计算得到的类间欧氏距离的平均值为采用全部波长计算得到的平均值的3.70倍,采用特征波长计算得到的类间欧氏距离与类内欧氏距离和的比值的平均值为采用全部波长计算得到的平均值的2.21倍。特征波长的类间与类内欧氏距离和的比值增大,说明筛选出来的特征波长能更加有效的表达不同类间的远近关系以及同一类内的离散度,SMCC算法是一种有效的、可应用于近红外光谱定性分析中的特征波长筛选方法。     

Real-time observation of structural and orientational transitions during growth of organic thin films

We study kinetically controlled orientational and structural transitions of molecular thin films during growth in situ and in real time, using diindenoperylene (DIP) as an example. By time-resolved surface-sensitive x-ray scattering (out of plane and in plane), we follow the organic molecular beam deposition of DIP on silicon oxide, on stepped sapphire, and on rubrene as an organic model surface. We identify transitions for the few-monolayer (ML) regime, as well as for thick (several 10's of ML) films. We show that the differences in the interaction of DIP with the substrate change the thickness as well as temperature range of the transitions, which include (transient) strain, subtle changes of the orientation, as well as complete reorientation. These effects should be considered rather general features of the growth of organics, which, with its orientational degrees of freedom, is qualitatively different from growth of inorganics.     

Pressure dependence of the radial breathing mode of carbon nanotubes: the effect of fluid adsorption

The pressure dependence of shifts in the vibrational modes of individual carbon nanotubes is strongly affected by the nature of the pressure transmitting medium as a result of adsorption at the nanotube surface. The adsorbate is treated as an elastic shell which couples with the radial breathing mode (RBM) of the nanotube via van der Waal interactions. Using analytical methods as well as molecular simulation, we observe a low frequency breathing mode for the adsorbed fluid at approximately 50 cm-1, as well as diameter dependent upshifts in the RBM frequency with pressure, suggesting metallic nanotubes may wet more than semiconducting ones.     

Propulsion of a molecular machine by asymmetric distribution of reaction products

A simple model for the reaction-driven propulsion of a small device is proposed as a model for (part of) a molecular machine in aqueous media. The motion of the device is driven by an asymmetric distribution of reaction products. The propulsive velocity of the device is calculated as well as the scale of the velocity fluctuations. The effects of hydrodynamic flow as well as a number of different scenarios for the kinetics of the reaction are addressed.