大黄素分子印迹整体柱的合成及性能表征

以大黄素分子为模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和十二醇为混合致孔剂,用原位聚合法合成了一系列分子印迹整体柱,并考察了模板分子在不同条件下合成的印迹聚合物及参考聚合物上保留因子的变化规律.在优化的合成条件下制得的分子印迹整体柱能有效地分离大黄素及其类似物.对分子印迹聚合物及参比聚合物的孔度分析数据表明:分子印迹聚合物中具有两种不同的孔度分布,而参比聚合物中只有一种.     

2,4-二氯苯氧乙酸分子印迹整体柱的制备、表征及色谱性能研究

以2,4-二氯苯氧乙酸分子为模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和十二醇为混合致孔剂,采用热引发原位聚合法制备了作为高效液相色谱固定相的分子印迹整体柱.用红外光谱、扫描电镜、比表面积分析法对聚合物进行了表征.考察了模板分子在不同条件下合成的印迹整体柱及空白整体柱上容量因子的变化规律,同时探讨了流动相中甲醇的体积分数、pH值、流速对印迹整体柱分离性能的影响.结果表明,在优化的合成条件下制备的分子印迹整体柱可在15 min内分离2,4-二氯苯氧乙酸及其类似物苯氧乙酸,分离度为1.52.对柑桔提取液进行了分离测试,结果满意.     

联二萘酚印迹的电色谱整体柱的制备

讨论了分子印迹毛细管电色谱整体柱的制备.联二蔡酚作为印迹分子在热引发条件下聚合,其中甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯和异辛烷为致孔剂.考察了聚合参数对整体柱通透性及手性分离的影响.联二萘酚对映体在印迹整体柱上得到了基线分离,Rs值可达1.8.     

分子印迹聚合物的制备及其对香草醛的吸附行为

以香草醛为模板分子、甲基丙烯酸为功能单体、乙二醇二甲基丙烯酸酯为交联剂,制备了香草醛分子印迹聚合物(MIP);研究了以不同致孔剂合成的MIP在水溶液中对香草醛的吸附行为.结果表明,以乙腈为致孔剂合成的MIP对香草醛具有较高的识别特性,能较简便地用于香草醛的分离和富集.     

苯丙氨酸衍生物分子印迹聚合物的制备及手性拆分研究

以分子印迹技术合成分子印迹聚合物，作为手性色谱柱的固定相来拆分苯丙氨酸衍生物的对映异构体。采用了新型的交联剂及光引发剂。模板分子和可聚合的功能单体形成配合物是分子印迹聚合物必不可少的条件。模板分子与功能单体的比例为1:4时，获得了良好的分离效果，分离因子α为1.69。光聚合方式合成的分子印迹聚合物比热聚合方式合成的拆分能力要高。且聚合的温度越低，聚合物分离效果越好。     

特丁津分子印迹整体萃取棒的研制及其萃取性能

以特丁津为模板分子,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂,甲苯为致孔剂,在75 ℃下封管聚合反应24 h后,以HF溶液腐蚀除去玻璃毛细管,制备得到分子印迹整体萃取棒,优化了聚合配方和合成条件.采用扫描电镜表征了萃取棒表面形貌,结果表明:萃取棒表面呈疏松、多孔的结构.研究了特丁津分子印迹整体萃取棒作为三嗪类除草剂样品前处理分离介质的萃取条件和萃取性能.采用甲苯为萃取剂,萃取60 min后以150 μL甲醇解吸.与不加模板分子的整体萃取棒相比,分子印迹整体萃取棒对模板分子特丁津及其结构类似物西玛津、西草净、莠去津、莠灭净、扑灭津及特丁净表现出选择性识别能力,富集率分别提高到1.5～8.1倍,对氯三嗪的萃取选择性优于硫三嗪.     

二苯甲酰-D-酒石酸分子印迹整体柱的制备及其色谱性能

采用紫外光谱法选择丙烯酰胺为功能单体,以二苯甲酰-D-酒石酸(D-DBTA)为模板分子,丙烯酰胺为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯和十二醇为混合致孔剂,用原位分子印迹技术,合成了D-DBTA分子印迹整体聚合物。在优化色谱条件的基础上,25min内基本实现了DBTA消旋体的手性分离,分离度达1.25。对色谱分离过程中的热力学进行分析,在所考察的温度范围内,色谱分离存在两种不同的热力学过程,且两者与范特霍夫方程能够很好地吻合。在这两种热力学过程的转换温度处,分离因子α达最大值。     

分子印迹整体柱富集-高效液相色谱法测定植物中的痕量细胞分裂素

采用分子印迹整体柱富集-高效液相色谱法选择性分离分析了植物样品中痕量细胞分裂素的含量。结果表明,以激动素为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,甲苯与十二醇为致孔剂,可在不锈钢柱管中原位聚合制备激动素分子印迹整体柱;与非分子印迹整体柱对比,该分子印迹整体柱能选择性富集4种细胞分裂素,具有较好的重复性和高的萃取效率;在优化的实验条件下,激动素(K)、激动素核苷(KR)、反式-玉米素(tZ)和meta-topolin(mT)的平均加标回收率分别为91.9%、80.0%、87.5%和50.2%,相对标准偏差均小于11.8%。本方法已成功地用于不同植物样品中4种细胞分裂素的分离和分析。     

分子印迹整体柱快速分离烟酰胺及烟酸

以药物烟酰胺为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和正十二醇的混合溶液为致孔剂,采用原位聚合法制备了具有特定识别性能和分离能力的分子印迹聚合物,并将其作为高效液相色谱固定相,实现了模板分子与烟酸在2 min内的快速分离。在规格为50 mm×4.6 mm i.d.色谱柱上,以纯水为流动相（流速为7.0 mL/min）、操作温度为室温的色谱条件下,模板分子与烟酸的分离度达1.8。讨论了流动相中有机溶剂含量、醋酸及碱含量和流速对分离的影响。结果表明,原位聚合法制备的整体分子印迹聚合物在以纯水作流动相时对模板分子与其类似物有快速分离能力,这对于体内药物的分离富集研究具有很好的应用前景。     

本体聚合法制备2-氯酚分子印迹聚合物及其性能评价

采用本体聚合法,以2-氯酚为模板分子,4-乙烯吡啶为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂合成了一系列分子印迹聚合物,并通过选择性实验和静态吸附实验对聚合物的选择性及吸附性能进行评价.结果显示:当以甲苯作为致孔剂,功能单体与模板分子的摩尔比为2:1时,聚合物对模板分子的印迹因子为1.71,亲和位点总数Bmax为0.1137 mmol/g,具有最优的选择性和吸附能力.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.