聚酰亚胺对高性能树脂共混体系界面的反应增强

研究了以5-降冰片烯-2,3-二羧酸单甲酯为端基的PMR型聚酰亚胺(POI)作为界面介质对部分相容的聚醚砜/聚苯硫醚(PES/PPS)、聚醚醚酮/聚醚砜(PEEK/PES)共混体系的界面性质、形态结构及结晶行为的影响.结果表明,POI可以有效地增强两相间的界面粘结,显著降低PPS/PES共混物中PPS分散区的尺寸,改善两组分间的相容性.在熔融共混过程中,POI从本体向界面扩散并同PPS,PES产生交联和/或接枝,POI同PPS的反应活性远高于PES,但POI与PES发生反应.POI是PPS结晶的有效成核剂.     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_(max))、峰高(△C_(pmax))和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

 本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_max)、峰高(△C_pmax)和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

新型聚芳醚酮与热致性液晶高聚物共混物流变性能和力学性能的研究

本文研究了新型聚芳醚酮与热致性液晶高聚物(PEK-C/LCP)共混物的流变性能及力学性能。结果表明:由于LCP的加入,PEK-C的熔体粘度降低;随着剪切速率的增加,共混物熔体流动活化能从223.5KJ/mol降为102.2KJ/mol。共混物的玻璃化转变温度从纯PEK-C的218℃降为199℃;除模量增加外,其它力学性能均有所下降。同时利用SEM观察了共混物冲击断面形貌,未发现有LCP微纤维生成。     

新型聚芳醚酮与热致性液晶高聚物共混物流变性能和力学性能的研究

 本文研究了新型聚芳醚酮与热致性液晶高聚物(PEK-C/LCP)共混物的流变性能及力学性能。结果表明:由于LCP的加入,PEK-C的熔体粘度降低;随着剪切速率的增加,共混物熔体流动活化能从223.5KJ/mol降为102.2KJ/mol。共混物的玻璃化转变温度从纯PEK-C的218℃降为199℃;除模量增加外,其它力学性能均有所下降。同时利用SEM观察了共混物冲击断面形貌,未发现有LCP微纤维生成。     

聚醚酰亚胺/酚酞型聚醚醚酮共混体系相容性的稀溶液粘度法研究

<正> 近年来,有关高性能树脂聚酰亚胺共混物的研究日益引起人们的关注。已经发现许多种分子结构不同的聚酰亚胺之间,聚酰亚胺与聚苯并咪唑,或聚醚醚酮能形成完全相容的共混体系,从而扩大了高性能树脂聚酰亚胺的应用范围。 酚酞型聚醚醚酮(PEK-C)是由我所研究开发出的一种新型的聚醚醚酮类高性能树脂,它具有良好的可溶性,优异的机械强度和加工流动性,已广泛应用于结构材料及复合材料的制备。为进一步扩大该树脂的应用范围,本实验室在PEK-C共混物的研究做了大量的工作。本工作研究了聚醚酰亚胺(PEI)/PEK-C共混体系的相容性。PEI和PEK-C的分子结构如下:     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物/聚苯醚共混物的相容性和结晶行为

 本工作对聚氧化乙烯-聚苯乙烯-聚氧化乙烯(PEO-PS-PEO)三嵌段共聚物与聚苯醚(PPO)均聚物共混物的相容性及结晶行为进行了研究。结果表明,共混体系的相容性与嵌段共聚物中苯乙烯段的含量有关,PS含量越高,PPO与共聚物PS段的相容性越好。共混体系的结晶行为也明显不同于一般均聚物共混体系。在DSC降温结晶过程中最多可出现三个结晶峰。     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物/聚苯醚共混物的相容性和结晶行为

本工作对聚氧化乙烯-聚苯乙烯-聚氧化乙烯(PEO-PS-PEO)三嵌段共聚物与聚苯醚(PPO)均聚物共混物的相容性及结晶行为进行了研究。结果表明,共混体系的相容性与嵌段共聚物中苯乙烯段的含量有关,PS含量越高,PPO与共聚物PS段的相容性越好。共混体系的结晶行为也明显不同于一般均聚物共混体系。在DSC降温结晶过程中最多可出现三个结晶峰。     

酞侧基聚芳醚砜和聚芳醚酮的相容性

本文报道注射级酞侧基聚芳醚砜(PES-C)和聚芳醚酮(PEK-C)共混试样的玻璃化转变行为和部分力学性能的研究结果。并讨论共混工艺对相容性的影响。 PES-C和PEK-C树脂均由中国科学院长春应用化学研究所徐州工程塑料厂合成,在三氯甲烷中的比浓粘度ηsp/c(20℃)分别为0.45和0.47。将粉状树脂在GH-100Q高速搅拌器内按配方混合,并在烘箱内干燥后,用SHJ-30双螺杆挤出机在320～350℃(物料温度)挤出造粒。     

PTHF-b-PMMA/PVC共混体系的相容性和结晶行为

研究了具有焓效应的聚四氢呋喃-聚甲基丙烯酸甲酯两嵌段共聚物与聚氯乙烯PTHF-b-PMMA/PVC)共混体系的相容性和结晶行为. 结果表明, 其相容性比AB/A型嵌段共聚物共混体系的相容性要好得多; 与PTHF部分相容的PVC对PTHF微区的结晶行为可产生很大的影响. 应用有关理论和模型很好地解释了结晶行为的这种变化.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.