Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin

A molecularly imprinted polymer (MIP), with special molecule recognition properties of ciprofloxacin (CIP), was prepared by thermal polymerization in which ciprofloxacin acted as template molecule, α-methacrylic acid (MAA) acted as functional monomer and trimethylolpropane trimethylacrylate (TRIM) acted as crosslinker. The optimized ratio was determined to be n(CIP): n (MMA):n(TRIM)51:6:16 by investigation of the effects of different concentrations of functional monomer and the crosslinker on the MIP’s recognition properties. Equilibrium binding experiment was used to investigate the adsorption dynamics, the binding ability to template molecule and the substrate selectivity. Scatchard analysis was used to study the MIP’s binding characteristic to template molecule. The results indicated that MIP has higher adsorption ability and selectivity. The equilibrium distribution coefficient K _D was 41.64 and the separation factor α was 1.62. Scatchard analysis showed that two different kinds of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be K _d1 = 5.249 × 10⁻⁵ mol·L⁻¹, K _d2 = 2.237 × 10⁻³ mol·L⁻¹. __________ Translated from Chemistry, 2008, 71(2): 132–137     

Determination of sulfamethoxazole in milk using molecularly imprinted polymer monolith microextraction coupled to HPLC

We report on a new method for the selective extraction of the antibiotic sulfamethoxazole (SMO) in milk that is making use of a molecularly imprinted polymer (MIP) monolith as the sorbent. The monolith was synthesized in the tip of a micropipette using SMO as the template and a combination of acrylamide and 4-vinylpyridine as the co-functional monomers. The monolith was connected to syringes in different sizes and used for microextraction without any other treatment and showed high selectivity and enrichment ability for SMO. It was applied to the selective extraction and sensitive determination of SMO in milk. The linear range is from 5–600?μg?L^?1, the correlation coefficient (r²) is 0.9984, and the detection limit (at S/N?=?3) is 1?μg?L^?1. Recoveries range from 93.6 to 101.7?%, with relative standard deviations of <6.1?%.

Synthesis and photocatalytic activity of mesoporous SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>

Mesoporous SiO₂–TiO₂ was synthesized by the sol–gel method using Si(OC₂H₅)₄, Ti(OC₂H₅)₄, and stearyltrimethylammonium chloride. By using acetylacetone as the capping agent of Ti(OC₂H₅)₄, homogeneous SiO₂–TiO₂ composite was obtained. Spherical mesoporous SiO₂–TiO₂ was also synthesized by the sol–gel method using W/O emulsion under microwave irradiation. The specific surface area of these mesoporous SiO₂–TiO₂ materials decreased when the Ti/Si molar ratio was higher than 0.1, which indicated that Ti was homogeneously distributed in mesoporous SiO₂ matrix at Ti/Si ≦ 0.1. The photocatalytic activity of mesoporous SiO₂–TiO₂ materials was investigated by the degradation of methylene-blue in water under UV light irradiation. Mesoporous SiO₂–TiO₂ was effective for the adsorption–decomposition of methylene-blue.     

Structural and thermal properties of monolithic silica–phosphate (SiO<Subscript>2</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>) gel glasses prepared by sol–gel technique

A sol–gel process for producing monolithic silica–phosphate (SiO₂–P₂O₅) system different concentrations of P₂O₅, starting with tetra-ethoxysilane TEOS, and triethyl-phosphate as sources of SiO₂ and P₂O₅ was performed. The gels were heat-treated at temperatures ranging from 100 up to 900 °C. The structural and chemical analyses of the samples were determined by using X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). It was found from the XRD that the existence of phosphorus enhances the crystallization of silica gel, while the FTIR indicated the main functional groups of silica–phosphate. It is important to study the effect of hydroxyl in silica–phosphate glass. The results obtained are promising to use the prepared samples in a variety of applications, ranging from traditional application such as lighting products) to the modern application (such as optical fibers. Optical studies were measured by using the spectrophotometer in wavelength range 0.2–2.5 μm. The refractive index (n) was calculated for the prepared samples, it was found to be strongly affected by structural rearrangement resulting from the elimination of the solvent and the Si–OH, Si–O–Si and Si–O–OH bonding by phosphate and aluminum and it increases by increasing phosphate concentrations. The weight losses have investigated for prepared samples.     

Thermal and Microchemical Characterisation of Sol-Gel SiO2, TiO2 and xSiO2–(1–x)TiO2 Ceramic Materials

Amorphous SiO₂, TiO₂ and xSiO₂–(1–x)TiO₂ ceramic materials with selected values of x 0.5, 0.7 and 0.9, have been prepared via sol-gel process using silicon tetraethoxysilane (TEOS) and titanium tetraisopropoxide Ti(OPri)₄. By means of the combined use of differential thermal analysis (DTA),thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM),X-ray photoelectron spectroscopy (XPS) and X-ray induced Auger electron spectroscopy(XAES), the surface microchemical structure and morphology of the sol-gel materials have been studied as a function of thermal treatments carried out in air up to 1200°C. In the range of temperature from 50 to 450°C, DTA-TG results evidence a remarkable mass loss due to the evaporation of organic solvents entrapped in the sol-gel materials and of the remnant organic components of the precursor metal alkoxides. In the range of temperature from 400 to about 1000°C, by means of the combined use of DTA, XRD, XPS and XAES techniques as a function of temperature and of chemical composition, it is possible to evidence the formation of crystalline phases such as quartz, anatase and rutile. Furthermore, line shape analysis of O1s XPS peak allows to distinguish between single O–Ti and O–Si bonds and also to disclose the presence of cross linking Si–O–Ti bonds, that act as bridges between SiO₂and TiO₂ moieties. As a function of temperature, Si–O–Ti bonds are broken and the formation of new Ti–O and Si–O bonds as in TiO₂ and SiO₂takes place as well as a silica segregation phenomenon. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sol–gel immobilization of SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> on hydrophobic clay and its removal of methyl orange from water

In this study, SiO₂/TiO₂–organoclay hybrids with high adsorption capability and high photocatalytic activity were synthesized by immobilizing mixed silica and titanium dioxide nanoparticles on organically modified clay via a hydrothermal sol–gel method. Addition of negatively charged silica particles enhanced the uniform dispersion of titanium dioxide nanoparticles on organoclay layers by decreasing the system tension, which resulted in high photocatalytic activity of SiO₂/TiO₂–organoclay hybrids. The high adsorption capability endowed by organically modified clay enriched the organic compounds around the photoactive sites, and thus greatly improved the photodegradation efficiency. Combining the high adsorption capability of organoclay with the high photocatalytic activity of TiO₂ nanoparticles, SiO₂/TiO₂–organoclay hybrids were promising and cost-effective photocatalysts in removal of pollutants from wastewater.     

Synthesis,characterization and visible-light photocatalytic activity of TiO2–SiO2 composite modified with zinc porphyrins

Three types of silica gel supported titanium dioxide particles immobilizing Zn(II) carboxylphenyl porphyrins appending p-CH₃, p-H and p-Cl phenyl substituents (designated as ZnMP–TiO₂–SiO₂, ZnPP–TiO₂–SiO₂ and ZnCP–TiO₂–SiO₂, respectively) have been synthesized and characterized using SEM, XRD, IR, AFS, DRS, UV–Vis, XPS and TG. The photodegradation of α-terpinene in aqueous suspension was used to determine the photocatalytic activity of TiO₂–SiO₂ samples which had been impregnated with Zn(II) porphyrins, as sensitizers. The experimental results confirmed that the photocatalytic activitys of these composites are much higher than those of the nonmodified TiO₂–SiO₂ under visible light irradiation and follow the order of ZnMP–TiO₂–SiO₂ > ZnPP–TiO₂–SiO₂ > ZnCP–TiO₂–SiO₂.     

Impact of Transition Metal Substituents on Polysilane Properties: Iron versus Ruthenium

Summary. The previously unknown ruthenio disilanes Rp–Si₂Me₄–C₆H₄X (Rp = η⁵-C₅H₅Ru(CO)₂; X = H, Br, –CHO, CH=C(CN)₂) were synthesized from ClSi₂Me₄C₆H₄X (X = H, Br) and Rp⁻ using conventional chemical methods. Trends in the UV/Vis absorption spectra indicate strong electronic coupling within the Rp–Si–Si–C_aryl fragment and, therefore, closely resemble the ones observed for the corresponding iron complexes. The four compounds however, were shown to be less sensitive towards UV irradiation. The crystal structure of Rp–Si₂Me₄–C₆H₄CH=C(CN)₂ was determined by X-ray diffraction and exhibits an all-trans-array of the Ru–Si–Si–C_aryl moiety, what is a basic requirement for optimal through-bond interaction.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

A multivariate multianalyte screening method for sulfonamides in milk based on front-face fluorescence spectroscopy

Screening methods are used to detect the presence of a substance or class of substances at the level of interest and are specifically designed to avoid false compliant results. They should allow the running of a high number of samples per day at a low cost under routine conditions. In this work, a rapid and simple method for the screening of six sulfonamides (sulfadiazine, SD; sulfamerazine, SMR; sulfamethazine, SMT; sulfachloropyridazine, SCP; sulfathiazole, STZ and sulfamethoxazole, SMO) in milk samples is proposed and assessed according to the criteria required by the European Regulation, Decision 2002/657/EC. The method is based on modelling front-face fluorescence emission spectra by means of partial least squares class modelling (PLS-CM). The milk samples are pre-treated with a single easy step of derivatization with fluorescamine.After confirming that the method has equal analytical sensitivity for all the six sulfonamides, it is established that the multivariate analytical sensitivity at 100 μg L⁻¹ is 37.5 μg L⁻¹ when analysing a mixture of six sulfonamides added to different brands of milk and measured in different days. In addition, the method is applied to samples from 11 commercial brands of milk. For β = 0.05, threshold value established by the Decision 2002/657/EC for this method, the probability of false non-compliance, α, is equal to 0.17, allowing the suitable screening of these six sulfonamides.     

Size effect of silica nanoparticles on thermal decomposition of PMMA

The size effect of silica nanoparticles (SiO₂) on thermal decomposition of poly(methylmethacrylate) (PMMA) was investigated by the controlled rate thermogravimetry. Thermal degradation temperature of PMMA–SiO₂ composites depended on both fraction and size of SiO₂, the thermal degradation temperature of 23 nm (diameter) SiO₂–PMMA (6.1 wt%) was 13.5 °C higher than that of PMMA. The thermal stabilities of 17 nm SiO₂–PMMA (3.2 wt%) and 13 nm SiO₂–PMMA (4.8 wt%) were 21 and 23 °C, respectively, higher than that of PMMA without SiO₂. The degree of degradation improvement was increased linearly with the surface area of SiO₂. The number of surface hydroxyl group in unit volume of SiO₂ particle increased with increasing the specific surface area of SiO₂, and the interaction between hydroxide group of SiO₂ and carbonyl group of PMMA had an important role to improve the thermal stability of PMMA.     

Trace determination of sulfonamides residues in meat with a combination of solid-phase microextraction and liquid chromatography-mass spectrometry

An integrated method of combining solid-phase microextraction (SPME) with liquid chromatography-mass spectrometry (LC-MS) was evaluated for determination trace amount of sulfonamides in meat products. Eight commonly used sulfonamides, sulfadiazine (SDZ), sulfathiazole (STZ), sulfamerazine (SMR), sulfamethazine (SMT), sulfamonomethoxine (SMMX), sulfamethoxazole (SMXZ), sulfaquinoxaline (SQX) and sulfadimethoxine (SDMX), were investigated in this study. Chromatography was performed on a C₁₈ reversed-phase column using an isocratic acetonitrile in water as the mobile phase. Fiber coated with a 65 μm thickness of polydimethylsiloxane/divinylbenzene (PDMS/DVB) was used to extract sulfonamides at optimum conditions. Analytes were desorbed with static desorption in an SPME-HPLC desorbed chamber for 15 min and then determined by LC-MS. The detection limits of these sulfonamides in pork were from 16 μg kg⁻¹ (SMT) to 39 μg kg⁻¹ (SMMX). According to the analysis, the linear range was from 50 to 2000 μg kg⁻¹ with relative standard deviation (R.S.D.s) value below 15% (intra-day) and 19% (inter-day). The proposed method was tested by analyzing meats from a local market for sulfonamides residues. Some sulfonamides in our study were detected in the meat samples. The concentration of these residual sulfonamides ranged from 66 μg kg⁻¹ (SDZ) to 157 μg kg⁻¹ (SQX) in a chicken sample. The results demonstrate that the SPME-LC-MS system is highly effective in analyzing trace sulfonamides in meat products.     

1H MAS NMR characterization of hydrogen over silica-supported rhodium catalyst

Hydrogen species in both SiO₂ and Rh/SiO₂catalysts pretreated in different atmospheres (H₂, O₂, helium or air) at different temperatures (773 or 973 K) were investigated by means of¹H MAS NMR. In SiO₂ and O₂-pretreated catalysts, a series of downfield signals at ∼7.0, 3.8–4.0, 2.0 and 1.5–1.0 were detected. The first two signals can be attributed to strongly adsorbed and physisorbed water and the others to terminal silanol (SiOH) and SiOH under the screening of oxygen vacancies in SiO₂lattice, respectively. Besides the above signals, both upfield signal at ∼−110 and downfield signals at 3.0 and 0.0 were also detected in H₂-pretreated catalyst, respectively. The upfield signal at ∼−110 originated from the dissociative adsorption of H₂ over rhodium and was found to consist of both the contributions of reversible and irreversible hydrogen. There also probably existed another dissociatively adsorbed hydrogen over rhodium, which was known to be β hydrogen and in a unique form of “delocalized hydrogen”. It was presumed that the β hydrogen had an upfield shift of ca. −20–−50, though its¹H NMR signals, which, having been masked by the spinning sidebands of Si-OH, failed to be directly detected out. The downfield signal at 3.0 was assigned to spillover hydrogen weakly bound by the bridge oxygen of SiO₂. Another downfield signal at 0.0 was assigned to hydrogen held in the oxygen vacancies of SiO₂ (Si-H species), suffering from the screening of trapped electrons. Both the spillover hydrogen and the Si-H resulted from the migration of the reversible hydrogen and the β hydrogen from rhodium to SiO₂ in the close vicinity. It was proved that the above migration of hydrogen was preferred to occur at higher temperature than at lower temperature.     

Accessing HgSe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>S<Subscript><Emphasis Type="Italic">1−x</Emphasis></Subscript> Nanoparticles Using the Single-Source Reagent Me<Subscript>3</Subscript>Si–SeS–SiMe<Subscript>3</Subscript>

Mercury-selenosulfide (HgSe _x S _1-x ) nanoparticles have been synthesized using the single-source reagent Me₃Si–SeS–SiMe₃. The reagent distributes Se²⁻ and S²⁻ to the metal core as the reaction between Me₃Si–SeS–SiMe₃ and mercury acetate occurs via a redox pathway, ultimately giving rise to Se–S bond cleavage. Particles are characterized by EDX, TEM and powder X-ray diffraction analysis in conjunction with UV–Visible absorption spectroscopy. Dedicated to Prof. Dr. Dieter Fenske on the occasion of his 65th birthday.     

Molecular structure and conformation of triphenylsilane from gas-phase electron diffraction and theoretical calculations, and structural variations in H4?nSiPhn molecules (n?=?1–4)

The molecular structure of triphenylsilane has been investigated by gas-phase electron diffraction and theoretical calculations. The electron diffraction intensities from a previous study (Rozsondai B, Hargittai I, J Organomet Chem 334:269, 1987) have been reanalyzed using geometrical constraints and initial values of vibrational amplitudes from calculations. The free molecule has a chiral, propeller-like equilibrium conformation of C ₃ symmetry, with a twist angle of the phenyl groups τ = 39° ± 3°; the two enantiomeric conformers easily interconvert via three possible pathways. The low-frequency vibrational modes indicate that the three phenyl groups undergo large-amplitude torsional and out-of-plane bending vibrations about their respective Si–C bonds. Least-squares refinement of a model accounting for the bending vibrations gives the following bond distances and angles with estimated total errors: r _g(Si–C) = 1.874 ± 0.004 ?, 〈r _g(C–C)〉 = 1.402 ± 0.003 ?, 〈r _g(C–H)〉 = 1.102 ± 0.003 ?, and ∠_aC–Si–H = 108.6° ± 0.4°. Electron diffraction studies and MO calculations show that the lengths of the Si–C bonds in H_4−n SiPh _n molecules (n = 1–4) increase gradually with n, due to π → σ*(Si–C) delocalization. They also show that the mean lengths of the ring C–C bonds are about 0.003 ? larger than in unsubstituted benzene, due to a one hundredth angstrom lengthening of the C_ipso–C_ortho bonds caused by silicon substitution. A small increase of r(Si–H) and decrease of the ipso angle with increasing number of phenyl groups is also revealed by the calculations.     

SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> xerogels for tailoring the release of brilliant blue FCF

Xerogels consisting of SiO₂ and TiO₂ were explored for controlled release of brilliant blue FCF (BBF). Both SiO₂ and SiO₂–TiO₂ xerogels were prepared by way of sol–gel processing, and the BBF release behavior was compared. SiO₂–TiO₂ xerogels with varying TiO₂ content were also studied and the BBF release behavior was determined for each SiO₂–TiO₂ xerogel. It was found that the release of BBF from SiO₂ xerogels can be increased by the addition of TiO₂ content, and the amount and rate of BBF released from the SiO₂–TiO₂ xerogels can be changed by modifying the amount of TiO₂ included during the preparation of the xerogels, where the SiO₂–TiO₂ xerogels with a higher content of TiO₂ released a higher fraction of BBF in water media when compared to the release from SiO₂–TiO₂ xerogels with lower amounts of TiO₂. The experimental results have to be explained by a combination of porous structure, in situ dissolution–condensation during the BBF elution and the change of surface chemistry of the xerogel network with the addition of TiO₂.     

Quantitative Analysis of Sulfonamide Residues in Natural Animal Casings by HPLC

A multiresidue method has been developed for the simultaneous determination of sulfadiazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethoxydiazine, sulfamethylthiazole, sulfamethazine, sulfamonomethoxine, sulfamethoxypyridazine, sulfisoxazole, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in natural animal casings by HPLC after solid-phase extraction. The sulfonamides were extracted with acetonitrile and the extract cleaned up with an Oasis MCX SPE cartridge prior to analysis. Separation was on a ZOBAX Eclipse XDB-C₈ column using gradient elution with acetonitrile/methanol/0.1% acetic acid. The effect of separation conditions on chromatographic behavior and recovery has been studied. Calibration graphs were linear with very good correlation coefficients (r = 0.9983−0.9996) in the concentration range from 0.02 to 1 μg mL⁻¹. The limits of quantitation (LOQ) for the 13 sulfonamides were in the range of 1.5–2.2 μg kg⁻¹. Decision limits (CCα) and detection capabilities (CCβ) were in the range of 105.2–111.0 and 113.0–120.2 μg kg⁻¹, respectively. The recovery for casings spiked with 1.5–100 μg kg⁻¹ ranged from 65.2 to 85.9%. The relative standard deviations (RSDs) of the sulfonamides for six measurements at 100 μg kg⁻¹ were from 2.2 to 7.7%. The applicability of the method to the analysis of salted swine casings, salted sheep casings and dry casing samples was demonstrated.     

Synthesis of α,ω-dihalopermethyloligosilanes and silane-siloxane copolymers

α,ω-Dibromopermethyloligosilanes, Br(SiMe₂) _n Br (n=2–4, 6), were prepared by the reaction of dodecamethylcyclohexasilane with bromine. The reaction of (Me₂Si)₆ with MCl₄ (M=Sn, Ti) proceeds with the cleavage of Si−Si- and Si−C-bonds with the formation of α,ω-dichloropermethyloligosilanes, Cl(SiMe₂) _n Cl (n=2–4, 6), and chloro derivatives of cyclohexasilane, Cl _m Si₆Me_12−m (m=1, 2). Silane-siloxane copolymers of regular structure were obtained by heterofunctional copolycondensation of α,ω-dihalopermethyloligosilanes with 1,5-dihydroxyhexamethyltrisiloxane. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1513–1517, August, 1997.     

The role of the negatively charged (Si3−Si−F2)− complexes in interactions of fluorine with the (111) surface of silicon

We used the AM1 quantum chemical and cluster models to study the mechanism of formation of a SiF₂-like layer and dissociation of the Si−Si bond during the interaction of atomic fluorine with the (111) surface of silicon. It is shown that the negatively charged (Si₃−Si−F₂)⁻ complex with the five-coordinated centered silicon atom plays an important part in these processes. The above complex participates in the interaction of atomic fluorine with silicon to form a SiF₂-like layer and break the subsurface Si−Si bonds without penetration of fluorine atoms into the subsurface silicon layers. Institute of Semiconductor Physics, Siberian Branch, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 37, No. 1, pp. 14–21, January–February, 1996. Translated by I. Izvekova