Calcium-43 chemical shift tensors as probes of calcium binding environments. Insight into the structure of the vaterite CaCO3 polymorph by 43Ca solid-state NMR spectroscopy

Natural-abundance (43)Ca solid-state NMR spectroscopy at 21.1 T and gauge-including projector-augmented-wave (GIPAW) DFT calculations are developed as tools to provide insight into calcium binding environments, with special emphasis on the calcium chemical shift (CS) tensor. The first complete analysis of a (43)Ca solid-state NMR spectrum, including the relative orientation of the CS and electric field gradient (EFG) tensors, is reported for calcite. GIPAW calculations of the (43)Ca CS and EFG tensors for a series of small molecules are shown to reproduce experimental trends; for example, the trend in available solid-state chemical shifts is reproduced with a correlation coefficient of 0.983. The results strongly suggest the utility of the calcium CS tensor as a novel probe of calcium binding environments in a range of calcium-containing materials. For example, for three polymorphs of CaCO3 the CS tensor span ranges from 8 to 70 ppm and the symmetry around calcium is manifested differently in the CS tensor as compared with the EFG tensor. The advantages of characterizing the CS tensor are particularly evident in very high magnetic fields where the effect of calcium CS anisotropy is augmented in hertz while the effect of second-order quadrupolar broadening is often obscured for (43)Ca because of its small quadrupole moment. Finally, as an application of the combined experimental-theoretical approach, the solid-state structure of the vaterite polymorph of calcium carbonate is probed and we conclude that the hexagonal P6(3)/mmc space group provides a better representation of the structure than does the orthorhombic Pbnm space group, thereby demonstrating the utility of (43)Ca solid-state NMR as a complementary tool to X-ray crystallographic methods.     

Solid-state 139La and 15N NMR spectroscopy of lanthanum-containing metallocenes

A preliminary set of solid-state 139La and 15N NMR data for lanthanum-containing metallocenes is presented, including (C5H5)3La, (C5Me4H)3La, [(C5Me5)2La]+[BPh4]-, and 15N-enriched [(C5Me4H)2La(THF)]215N2. Broad 139La NMR spectra, with breadths ranging from 600 kHz to 2.5 MHz, were acquired with piecewise QCPMG techniques at 9.4 T. Simulations of the spectra reveal 139La quadrupolar coupling constants (CQ) between 44 and 105 MHz. In addition, the first NMR measurement of a nitrogen chemical shift (CS) tensor for dinitrogen bound side-on to a metal atom is reported for [(C5Me4H)2La(THF)]215N2. The 139La NMR parameters show remarkable sensitivity to changes in metallocene structure and can be interpreted in an intuitive manner. Preliminary RHF and DFT calculations of 139La electric field gradient (EFG) and nitrogen CS tensors are used to provide tensor orientations and to rationalize the origin of the NMR parameters in terms of molecular structure and symmetry. The sensitivity of 139La and 15N NMR tensor parameters to changes in structure and bonding should prove invaluable in future studies of noncrystalline and disordered systems.     

Natural abundance solid-state 67Zn NMR characterization of microporous zinc phosphites and zinc phosphates at ultrahigh magnetic field

Zinc-phosphite and -phosphate based microporous materials are crystalline open framework materials with potential industrial applications. Although (31)P MAS NMR has been used for characterization of these materials, the local environments around zinc centres have never been directly probed by solid-state NMR due to the many unfavourable NMR characteristics of (67)Zn. In this work, we have characterized the local structure around the Zn centres in several representative microporous zinc phosphites and zinc phosphates by acquiring natural abundance (67)Zn solid-state NMR spectra at ultrahigh magnetic field of 21.1 T. The observed line-shapes are mainly determined by the second order quadrupolar interaction. The NMR tensor parameters were extracted from the spectra and are related to the local geometry around the Zn centre. Computational study of the electric field gradient (EFG) tensor at Zn was performed using hybrid density functional theory (DFT) calculations at B3LYP level of theory on model clusters. The calculations using Projector Augmented-Wave (PAW) method were also carried out with the CASTEP code wherever it was possible. The work has shown that it is possible to study Zn environments in porous materials which often have very low Zn concentration by natural abundance (67)Zn SSNMR at very high magnetic fields.     

Solid-state 91Zr NMR spectroscopy studies of zirconocene olefin polymerization catalyst precursors

(91)Zr (I = 5/2) solid-state NMR (SSNMR) spectra of the zirconocene compounds, Cp(2)ZrCl(2), Cp*(2)ZrCl(2) (1), Cp(2)ZrBr(2) (2), (Me(3)SiC(5)H(4))(2)ZrBr(2) (3), O(Me(2)SiC(5)H(4))(2)ZrBr(2) (4), (1,3-C(5)H(3))(SiMe(2)OSiMe(2))(2)(1,3-C(5)H(3))ZrBr(2) (5), Ind(2)ZrCl(2) (6), Cp(2)ZrMeCl (7), Cp(2)ZrMe(2) (8), and [Cp(2)ZrMe][MeB(C(6)F(5))(3)] (9) have been acquired. Static (91)Zr SSNMR spectra have been acquired for all complexes at magnetic fields of 9.4 and 21.1 T. Cp(2)ZrCl(2) and complexes 1 to 5 possess relatively narrow central transition powder patterns which allows for magic-angle spinning (MAS) (91)Zr solid-state NMR spectra to be acquired at a moderate field strength of 9.4 T. Complexes 6 to 9 possess ultrawideline central transition SSNMR spectra necessitating piece-wise acquisition techniques. From the static and MAS (91)Zr SSNMR spectra, it is possible to measure (91)Zr electric field gradient (EFG) and chemical shift (CS) tensor parameters, as well as the Euler angles which describe their relative orientation. Basis sets and methods for the accurate quantum chemical calculation of (91)Zr EFG and CS tensors have been identified. The origin of the observed EFG and CS tensor parameters are further investigated by visualization of the EFG and CS tensor orientations within the molecular frames. Correlations between the observed and calculated NMR tensor parameters and molecular symmetry and structure are made. All of these observations suggest that (91)Zr SSNMR spectroscopy can be utilized to probe the molecular structure of a variety of homogeneous and heterogeneous olefin polymerization catalysts.     

An investigation of lanthanum coordination compounds by using solid-state 139La NMR spectroscopy and relativistic density functional theory

Lanthanum-139 NMR spectra of stationary samples of several solid La(III) coordination compounds have been obtained at applied magnetic fields of 11.75 and 17.60 T. The breadth and shape of the 139La NMR spectra of the central transition are dominated by the interaction between the 139La nuclear quadrupole moment and the electric field gradient (EFG) at that nucleus; however, the influence of chemical-shift anisotropy on the NMR spectra is non-negligible for the majority of the compounds investigated. Analysis of the experimental NMR spectra reveals that the 139La quadrupolar coupling constants (C(Q)) range from 10.0 to 35.6 MHz, the spans of the chemical-shift tensor (Omega) range from 50 to 260 ppm, and the isotropic chemical shifts (delta(iso)) range from -80 to 178 ppm. In general, there is a correlation between the magnitudes of C(Q) and Omega, and delta(iso) is shown to depend on the La coordination number. Magnetic-shielding tensors, calculated by using relativistic zeroth-order regular approximation density functional theory (ZORA-DFT) and incorporating scalar only or scalar plus spin-orbit relativistic effects, qualitatively reproduce the experimental chemical-shift tensors. In general, the inclusion of spin-orbit coupling yields results that are in better agreement with those from the experiment. The magnetic-shielding calculations and experimentally determined Euler angles can be used to predict the orientation of the chemical-shift and EFG tensors in the molecular frame. This study demonstrates that solid-state 139La NMR spectroscopy is a useful characterization method and can provide insight into the molecular structure of lanthanum coordination compounds.     

A combined solid-state NMR and X-ray crystallography study of the bromide ion environments in triphenylphosphonium bromides

Multinuclear ((31)P and (79/81)Br), multifield (9.4, 11.75, and 21.1 T) solid-state nuclear magnetic resonance experiments are performed for seven phosphonium bromides bearing the triphenylphosphonium cation, a molecular scaffold found in many applications in chemistry. This is undertaken to fully characterise their bromine electric field gradient (EFG) tensors, as well as the chemical shift (CS) tensors of both the halogen and the phosphorus nuclei, providing a rare and novel insight into the local electronic environments surrounding them. New crystal structures, obtained from single-crystal X-ray diffraction, are reported for six compounds to aid in the interpretation of the NMR data. Among them is a new structure of BrPPh(4), because the previously reported one was inconsistent with our magnetic resonance data, thereby demonstrating how NMR data of non-standard nuclei can correct or improve X-ray diffraction data. Our results indicate that, despite sizable quadrupolar interactions, (79/81)Br magnetic resonance spectroscopy is a powerful characterisation tool that allows for the differentiation between chemically similar bromine sites, as shown through the range in the characteristic NMR parameters. (35/37)Cl solid-state NMR data, obtained for an analogous phosphonium chloride sample, provide insight into the relationship between unit cell volume, nuclear quadrupolar coupling constants, and Sternheimer antishielding factors. The experimental findings are complemented by gauge-including projector-augmented wave (GIPAW) DFT calculations, which substantiate our experimentally determined strong dependence of the largest component of the bromine CS tensor, δ(11), on the shortest Br-P distance in the crystal structure, a finding that has possible application in the field of NMR crystallography. This trend is explained in terms of Ramsey's theory on paramagnetic shielding. Overall, this work demonstrates how careful NMR studies of underexploited exotic nuclides, such as (79/81)Br, can afford insights into structure and bonding environments in the solid state.     

Application of solid-state 35Cl NMR to the structural characterization of hydrochloride pharmaceuticals and their polymorphs

Solid-state (35)Cl NMR (SSNMR) spectroscopy is shown to be a useful probe of structure and polymorphism in HCl pharmaceuticals, which constitute ca. 50% of known pharmaceutical salts. Chlorine NMR spectra, single-crystal and powder X-ray diffraction data, and complementary ab initio calculations are presented for a series of HCl local anesthetic (LA) pharmaceuticals and some of their polymorphs. (35)Cl MAS SSNMR spectra acquired at 21.1 T and spectra of stationary samples at 9.4 and 21.1 T allow for extraction of chlorine electric field gradient (EFG) and chemical shift (CS) parameters. The sensitivity of the (35)Cl EFG and CS tensors to subtle changes in the chlorine environments is reflected in the (35)Cl SSNMR powder patterns. The (35)Cl SSNMR spectra are shown to serve as a rapid fingerprint for identifying and distinguishing polymorphs, as well as a useful tool for structural interpretation. First principles calculations of (35)Cl EFG and CS tensor parameters are in good agreement with the experimental values. The sensitivity of the chlorine NMR interaction tensor parameters to the chlorine chemical environment and the potential for modeling these sites with ab initio calculations hold much promise for application to polymorph screening for a wide variety of HCl pharmaceuticals.     

Solid-state NMR characterization of 69Ga and 71Ga in crystalline solids

Gallium model systems containing four- and six-coordinate gallium sites have been investigated using solid-state NMR. Measurement of the isotropic chemical shift and electric field gradient (EFG) have been performed at 9.4 T on alpha-Ga2O3, beta-Ga2O3, LiGaO2, NaGaO2, KGaO2, Ga2(SO4)3, and LaGaO3 using a variety of techniques on both NMR active nuclei (69Ga and 71Ga) including static, high speed magic-angle spinning (MAS), satellite transition (ST) spectroscopy, and rotor-assisted population transfer (RAPT). The chemical shift is found to correlate well with the coordination number, with four-coordinate gallium having values of approximately 50 ppm and six-coordinate gallium having values near 225 ppm (referenced to 1 M gallium nitrate solution). The magnitude of the EFG is found to be correlated to the distortion of the gallium polyhedra, with the strained systems having EFGs of 3 x 10(21) Vm(-2) or more, while the less strained systems have values of 1.5 x 10(21) Vm(-2) or less. A plot of chemical shift versus EFG suggests that solid-state NMR of gallium oxyanions can be more discriminating than liquid state NMR chemical shifts alone.     

Solid-state (63)Cu and (65)Cu NMR spectroscopy of inorganic and organometallic copper(I) complexes

Solid-state 63Cu and 65Cu NMR experiments have been conducted on a series of inorganic and organometallic copper(I) complexes possessing a variety of spherically asymmetric two-, three-, and four-coordinate Cu coordination environments. Variations in structure and symmetry, and corresponding changes in the electric field gradient (EFG) tensors, yield 63/65Cu quadrupolar coupling constants (CQ) ranging from 22.0 to 71.0 MHz for spherically asymmetric Cu sites. These large quadrupolar interactions result in spectra featuring quadrupolar-dominated central transition patterns with breadths ranging from 760 kHz to 6.7 MHz. Accordingly, Hahn-echo and/or QCPMG pulse sequences were applied in a frequency-stepped manner to rapidly acquire high S/N powder patterns. Significant copper chemical shielding anisotropies (CSAs) are also observed in some cases, ranging from 1000 to 1500 ppm. 31P CP/MAS NMR spectra for complexes featuring 63/65Cu-31P spin pairs exhibit residual dipolar coupling and are simulated to determine both the sign of CQ and the EFG tensor orientations relative to the Cu-P bond axes. X-ray crystallographic data and theoretical (Hartree-Fock and density functional theory) calculations of 63/65Cu EFG and CS tensors are utilized to examine the relationships between NMR interaction tensor parameters, the magnitudes and orientations of the principal components, and molecular structure and symmetry.     

Experimental and theoretical studies of 45Sc NMR interactions in solids

Solid-state 45Sc NMR spectroscopy, ab initio calculations, and X-ray crystallography are applied to examine the relationships between 45Sc NMR interactions and molecular structure and symmetry. Solid-state 45Sc (I = 7/2) magic-angle spinning (MAS) and static NMR spectra of powdered samples of Sc(acac)3, Sc(TMHD)3, Sc(NO3)3.5H2O, Sc(OAc)3, ScCl3.6H2O, ScCl3.3THF, and ScCp3 have been acquired. These systems provide a variety of scandium coordination environments yielding an array of distinct 45Sc chemical shielding (CS) and electric field gradient (EFG) tensor parameters. Acquisition of spectra at two distinct magnetic fields allows for the first observations of scandium chemical shielding anisotropy (CSA). 45Sc quadrupolar coupling constants (CQ) range from 3.9 to 13.1 MHz and correlate directly with the symmetry of the scandium coordination environment. Single-crystal X-ray structures were determined for Sc(TMHD)3, ScCl3.6H2O, and Sc(NO3)3.5H2O to establish the hitherto unknown scandium coordination environments. A comprehensive series of ab initio calculations of EFG and CS tensor parameters are in excellent agreement with the observed parameters. Theoretically determined orientations of the NMR interaction tensors allow for correlations between NMR tensor characteristics and scandium environments. Solid-state 45Sc, 13C, and 19F NMR experiments are also applied to characterize the structures of the microcrystalline Lewis acid catalyst Sc(OTf)3 (for which the crystal structure is unknown) and a noncrystalline, microencapsulated, polystyrene-supported form of the compound.     

Chlorine-35/37 NMR spectroscopy of solid amino acid hydrochlorides: refinement of hydrogen-bonded proton positions using experiment and theory

Trends in the chlorine chemical shift (CS) tensors of amino acid hydrochlorides are investigated in the context of new data obtained at 21.1 T and extensive quantum chemical calculations. The analysis of chlorine-35/37 NMR spectra of solid L-tryptophan hydrochloride obtained at two magnetic field strengths yields the chlorine electric field gradient (EFG) and CS tensors, and their relative orientations. The chlorine CS tensor is also determined for the first time for DL-arginine hydrochloride monohydrate. The drastic influence of 1H decoupling at 21.1 T on the spectral features of salts with particularly small 35Cl quadrupolar coupling constants (CQ) is demonstrated. The chlorine CS tensor spans (Omega) of hydrochloride salts of hydrophobic amino acids are found to be larger than those for salts of hydrophilic amino acids. A new combined experimental-theoretical procedure is described in which quantum chemical geometry optimizations of hydrogen-bonded proton positions around the chloride ions in a series of amino acid hydrochlorides are cross-validated against the experimental chlorine EFG and CS tensor data. The conclusion is reached that the relatively computationally inexpensive B3LYP/3-21G* method provides proton positions which are suitable for subsequent higher-level calculations of the chlorine EFG tensors. The computed value of is less sensitive to the proton positions. Following this cross-validation procedure, /CQ(35Cl)/ is generally predicted within 15% of the experimental value for a range of HCl salts. The results suggest the applicability of chlorine NMR interaction tensors in the refinement of proton positions in structurally similar compounds, e.g., chloride ion channels, for which neutron diffraction data are unavailable.     

Comparing main group and transition-metal square-planar complexes of the diselenoimidodiphosphinate anion: a solid-state NMR investigation of M[N(iPr2PSe)2]2 (M = Se, Te; Pd, Pt)

A comparison of the square-planar complexes of group 10 (Pd(II), Pt(II)) and 16 (Se(II), Te(II)) centers with the tetraisopropyldiselenoimidodiphosphinate anion, [N((i)Pr2PSe)2](-), is made on the basis of the results of a solid-state (31)P, (77)Se, (125)Te, and (195)Pt NMR investigation. Density functional theory calculations of the respective chemical shift and (14)N electric field gradient tensors in these compounds complement the experimental results. The NMR spectra were analyzed to determine the respective phosphorus, selenium, tellurium, and platinum chemical shift tensors along with numerous indirect spin-spin coupling constants. Special attention was given to observed differences in the NMR parameters for the transition metal and main-group square-planar complexes. Residual dipolar coupling between (14)N and (31)P, not observed in the solid-state (31)P NMR spectra of the Pd(II) and Pt(II) complexes, was observed at 4.7 and 7.0 T for M[N((i)Pr 2PSe)2]2(M = Se, Te) yielding average values of R((31)P, (14)N)eff = 890 Hz, CQ((14)N) = 2.5 MHz, (1) J( (31)P, (14)N) iso= 15 Hz, alpha = 90 degrees , beta = 17 degrees . The span, Omega, and calculated orientation of the selenium chemical shift tensor for the diselenoimidodiphosphinate anion is found to depend on whether the selenium is located within a pseudoboat or distorted-chair MSe 2P 2N six-membered ring. The largest reported values of (1)J((77)Se, (77)Se) iso, 405 and 435 Hz, and (1)J((125)Te, (77)Se)iso, 1120 and 1270 Hz, were obtained for the selenium and tellurium complexes, respectively; however, in contrast a correspondingly large value of (1)J((195)Pt, (77)Se)iso was not found. The chemical shift tensors for the central atoms, Se(II) and Te(II), possess positive skews, while for Pt(II) its chemical shift tensor has a negative kappa. This observed difference for the shielding of the central atoms has been explained using a qualitative molecular orbital approach.     

A high-field solid-state 35/37Cl NMR and quantum chemical investigation of the chlorine quadrupolar and chemical shift tensors in amino acid hydrochlorides

A series of six L-amino acid hydrochloride salts has been studied by 35/37Cl solid-state NMR spectroscopy (at 11.75 and 21.1 T) and complementary quantum chemical calculations. Analyses of NMR spectra acquired under static and magic-angle-spinning conditions for the six hydrochloride salts, those of aspartic acid, alanine, cysteine, histidine, methionine and threonine, allowed the extraction of information regarding the chlorine electric field gradient (EFG) and chemical shift tensors, including their relative orientation. Both tensors are found to be highly dependent on the local environment, with chlorine-35 quadrupolar coupling constants (CQ) ranging from -7.1 to 4.41 MHz and chemical shift tensor spans ranging from 60 to 100 ppm; the value of CQ for aspartic acid hydrochloride is the largest in magnitude observed to date for an organic hydrochloride salt. Quantum chemical calculations performed on cluster models of the chloride ion environment demonstrated agreement between experiment and theory, reproducing CQ to within 18%. In addition, the accuracy of the calculated values of the NMR parameters as a function of the quality of the input structure was explored. Selected X-ray structures were determined (L-Asp HCl; L-Thr HCl) or re-determined (L-Cys HCl.H2O) to demonstrate the benefits of having accurate crystal structures for calculations. The self-consistent charge field perturbation model was also employed and was found to improve the accuracy of calculated quadrupolar coupling constants, demonstrating the impact of the neighbouring ions on the EFG tensor of the central chloride ion. Taken together, the present work contributes to an improved understanding of the factors influencing 35/37Cl NMR interaction tensors in organic hydrochlorides.     

Combined first-principles computational and experimental multinuclear solid-state NMR investigation of amino acids

13C, 14N, 15N, 17O, and 35Cl NMR parameters, including chemical shift tensors and quadrupolar tensors for 14N, 17O, and 35Cl, are calculated for the crystalline forms of various amino acids under periodic boundary conditions and complemented by experiment where necessary. The 13C shift tensors and 14N electric field gradient (EFG) tensors are in excellent agreement with experiment. Similarly, static 17O NMR spectra could be precisely simulated using the calculation of the full chemical shift (CS) tensors and their relative orientation with the EFG tensors. This study allows correlations to be found between hydrogen bonding in the crystal structures and the 17O NMR shielding parameters and the 35Cl quadrupolar parameters, respectively. Calculations using the two experimental structures for L-alanine have shown that, while the calculated isotropic chemical shift values of 13C and 15N are relatively insensitive to small differences in the experimental structure, the 17O shift is markedly affected.     

Density functional theory investigation of hydrogen bonding effects on the oxygen, nitrogen and hydrogen electric field gradient and chemical shielding tensors of anhydrous chitosan crystalline structure

A systematic computational investigation was carried out to characterize the 17O, 14N and 2H electric field gradient, EFG, as well as 17O, 15N, 13C and 1H chemical shielding tensors in the anhydrous chitosan crystalline structure. To include the hydrogen-bonding effects in the calculations, the most probable interacting molecules with the target molecule in the crystalline phase were considered through a hexameric cluster. The computations were performed with the B3LYP method and 6-311++G(d,p) and 6-31++G(d,p) standard basis sets using the Gaussian 98 suite of programs. Calculated EFG and chemical shielding tensors were used to evaluate the 17O, 14N and 2H nuclear quadrupole resonance, NQR, and 17O, 15N, 13C and 1H nuclear magnetic resonance, NMR, parameters in the hexameric cluster, which are in good agreement with the available experimental data. The difference between the calculated NQR and NMR parameters of the monomer and hexamer cluster shows how much hydrogen bonding interactions affect the EFG and chemical shielding tensors of each nucleus. These results indicate that both O(3)-H(33)...O(5-3) and N-H(22)...O(6-4) hydrogen bonding have a major influence on NQR and NMR parameters. Also, the quantum chemical calculations indicate that the intra- and intermolecular hydrogen bonding interactions play an essential role in determining the relative orientation of EFG and chemical shielding principal components in the molecular frame axes.     

Characterization of stereochemistry and molecular conformation using solid-state NMR tensors

A solid-state NMR technique is described for establishing stereochemistry using the natural product terrein as a model compound. This method involves comparison of experimental (13)C tensor principal values with ab initio computed values for all possible computer-generated stereoisomers. In terrein the relative stereochemistry is confirmed by NMR to be 2R*,3S with high statistical probability (>99.5%). The proposed approach also simultaneously verifies the molecular conformation of the two hydroxy groups in terrein established by X-ray data. It is sufficient to use only shift tensor values at carbons 2 and 3, the stereocenters, to characterize both the stereochemistry and molecular conformations. The solid-state NMR method appears to be especially useful for determining relative stereochemistry of compounds or their derivatives that are difficult to crystallize.     

Theoretical study of electric field gradients at nitrogen nuclei in HNO,CH3NO and C2H3NO

Electric field gradients (EFGs) at the nitrogen nuclei of nitroxyl, nitrosomethane and nitrosoethylene were calculated by employing the complete-active-space self-consistent field (CASSCF), internally contracted multireference configuration interaction (icMRCI) and single-configuration coupled-cluster (CC) methods with correlation-consistent basis sets at the levels of attainable accuracy. Changes in the pσ and pπ atomic orbital populations were used to rationalize the differences between the N EFG tensor components related to the nitroso compound and separate nitric oxide. Calculated ¹⁴N nuclear quadrupole coupling constants were found in reasonable accord with experimental values. Comparison of electric dipole moments and potential energy characteristics with external values served to testify to good overall quality of the wave functions used in our calculations.     

Nuclear spin relaxation due to chemical shift anisotropy of gas-phase 129Xe

Nuclear spin relaxation provides detailed dynamical information on molecular systems and materials. Here, first-principles modeling of the chemical shift anisotropy (CSA) relaxation time for the prototypic monoatomic (129)Xe gas is carried out, both complementing and predicting the results of NMR measurements. Our approach is based on molecular dynamics simulations combined with pre-parametrized ab initio binary nuclear shielding tensors, an "NMR force field". By using the Redfield relaxation formalism, the simulated CSA time correlation functions lead to spectral density functions that, for the first time, quantitatively determine the experimental spin-lattice relaxation times T(1). The quality requirements on both the Xe-Xe interaction potential and binary shielding tensor are investigated in the context of CSA T(1). Persistent dimers Xe(2) are found to be responsible for the CSA relaxation mechanism in the low-density limit of the gas, completely in line with the earlier experimental findings.     

Solid-state 17O NMR study of the electric-field-gradient and chemical shielding tensors in polycrystalline amino acids

We have presented a systematic experimental investigation of carboxyl oxygen electric-field-gradient (EFG) and chemical shielding (CS) tensors in crystalline amino acids. Three 17O-enriched amino acids were prepared: L-aspartic acid, L-threonine, and L-tyrosine. Analysis of two-dimensional 17O multiple-quantum magic-angle spinning (MQMAS), MAS, and stationary NMR spectra yields the 17O CS, EFG tensors and the relative orientations between the two tensors for the amino acids. The values of quadrupolar coupling constants (CQ) are found to be in the range of 6.70-7.60 MHz. The values of deltaiso lie in the range of 268-292 ppm, while those of the delta11 and delta22 components vary from 428 to 502 ppm, and from 303 to 338 ppm, respectively. There is a significant correlation between the magnitudes of delta22 components and C--O bond lengths. Since C--O bond length may be related to hydrogen-bonding environments, solid-state 17O NMR has significant potential to provide insights into important aspects of hydrogen bonds in biological systems.     

A Study of Transition‐Metal Organometallic Complexes Combining 35Cl Solid‐State NMR Spectroscopy and 35Cl NQR Spectroscopy and First‐Principles DFT Calculations

A series of transition‐metal organometallic complexes with commonly occurring metal? chlorine bonding motifs were characterized using ³⁵Cl solid‐state NMR (SSNMR) spectroscopy, ³⁵Cl nuclear quadrupole resonance (NQR) spectroscopy, and first‐principles density functional theory (DFT) calculations of NMR interaction tensors. Static ³⁵Cl ultra‐wideline NMR spectra were acquired in a piecewise manner at standard (9.4 T) and high (21.1 T) magnetic field strengths using the WURST‐QCPMG pulse sequence. The ³⁵Cl electric field gradient (EFG) and chemical shielding (CS) tensor parameters were readily extracted from analytical simulations of the spectra; in particular, the quadrupolar parameters are shown to be very sensitive to structural differences, and can easily differentiate between chlorine atoms in bridging and terminal bonding environments. ³⁵Cl NQR spectra were acquired for many of the complexes, which aided in resolving structurally similar, yet crystallographically distinct and magnetically inequivalent chlorine sites, and with the interpretation and assignment of ³⁵Cl SSNMR spectra. ³⁵Cl EFG tensors obtained from first‐principles DFT calculations are consistently in good agreement with experiment, highlighting the importance of using a combined approach of theoretical and experimental methods for structural characterization. Finally, a preliminary example of a ³⁵Cl SSNMR spectrum of a transition‐metal species (TiCl₄) diluted and supported on non‐porous silica is presented. The combination of ³⁵Cl SSNMR and ³⁵Cl NQR spectroscopy and DFT calculations is shown to be a promising and simple methodology for the characterization of all manner of chlorine‐containing transition‐metal complexes, in pure, impure bulk and supported forms.