CeO2和Pd在Ni/γ-Al2O3催化剂中的助剂作用

采用脉冲微反技术研究了添加n型半导体氧化物CeO2及贵金属Pd对Ni/γ Al2O3催化剂上CH4积炭/CO2消炭反应性能的影响,并运用BET、TPR、CO2 TPSR及氢吸附等技术对催化剂进行了表征.结果表明, n型半导体氧化物CeO2的添加可以降低Ni/γ Al2O3催化剂上CH4裂解积炭活性,提高CO2消炭活性,添加少量贵金属Pd可以进一步改变载体Al2O3、助剂CeO2和活性组分Ni之间的相互作用,从而改善Ni/γ Al2O3催化剂的抗积炭性能.通过Ni Ce Pd/γ Al2O3催化剂上CH4积炭/CO2消炭模型对上述作用机制作出了新的解释.     

Au/Ce1-xZrxO2催化剂的制备、表征及其在CO氧化和水煤气变换反应中的催化性能

采用共沉淀法制备了不同锆铈摩尔比的Ce1-xZrxO2(x=0,0.1,0.3,0.5,0.7,0.9和1.0)氧化物,并以改性的浸渍法制备了金担载量为1%(质量分数)的Au/Ce1-xZrxO2催化剂.考察了催化剂在低温CO氧化和水煤气变换反应中的催化性能.应用氮物理吸附、X射线衍射、透射电镜和H2程序升温还原等技术对氧化物载体及其负载金催化剂进行了表征,并与其催化性能进行了关联.结果表明,与纯CeO2和ZrO2相比,Ce1-xZrxO2的比表面积增大而孔径减小,孔分布更加集中.Zr的加入使表面Ce4 的还原更加困难,使体相Ce4 的还原更加容易.活性组分金的加入有利于铈锆氧化物的还原.ZrO2载体较大的孔径使金在载体表面分散均匀而粒子较小,因此与Au/CeO2和Au/Ce1-xZrxO2相比,Au/ZrO2具有更好的低温CO氧化活性和水煤气变换活性,而Au/CeZrO在高温下的水煤气变换反应中表现出更好的催化性能.     

贵金属原子在CeO2(111)表面吸附的密度泛函理论研究

利用密度泛函理论系统研究了贵金属原子(Au、Pd、Pt和Rh)在CeO₂(111)表面的吸附行为。结果表明,Au吸附在氧顶位最稳定,Pd、Pt倾向吸附于氧桥位,而Rh在洞位最稳定。当金属原子吸附在氧顶位时,吸附强度依次为Pt > Rh > Pd > Au。Pd、Pt与Rh吸附后在Ce 4f、O 2p电子峰间出现掺杂峰;Au未出现掺杂电子峰,其d电子峰与表面O 2p峰在-4～-1 eV重叠。态密度分析表明,Au吸附在氧顶位、Pd与Pt吸附在桥位、Rh吸附在洞位时,金属与CeO₂(111)表面氧原子作用较强,这与Bader电荷分析结果相一致。     

Direct evidence of redox interaction between metal ion and support oxide in Ce(0.98)Pd(0.02)O(2-δ) by a combined electrochemical and XPS study

A combined electrochemical method and X-ray photo electron spectroscopy (XPS) has been utilized to understand the Pd(2+)/CeO(2) interaction in Ce(1-x)Pd(x)O(2-δ) (x = 0.02). A constant positive potential (chronoamperometry) is applied to Ce(0.98)Pd(0.02)O(2-δ) working electrode which causes Ce(4+) to reduce to Ce(3+) to the extent of ~35%, while Pd remains in the +2 oxidation state. Electrochemically cycling this electrode between 0.0-1.2 V reverts back to the original state of the catalyst. This reversibility is attributed to the reversible reduction of Ce(4+) to Ce(3+) state. CeO(2) electrode with no metal component reduces to CeO(2-y) (y~0.4) after applying 1.2 V which is not reversible and the original composition of CeO(2) cannot be brought back in any electrochemical condition. During the electro-catalytic oxygen evolution reaction at a constant 1.2 V for 1000 s, Ce(0.98)Pd(0.02)O(2-δ) reaches a steady state composition with Pd in the +2 states and Ce(4+): Ce(3+) in the ratio of 0.65:0.35. This composition can be denoted as Ce(4+)(0.63)Ce(3+)(0.35)Pd(0.02)O(2-δ-y) (y~0.17). When pure CeO(2) is put under similar electrochemical condition, it never reaches the steady state composition and reduces almost to 85%. Thus, Ce(0.98)Pd(0.02)O(2-δ) forms a stable electrode for the electro-oxidation of H(2)O to O(2) unlike CeO(2) due to the metal support interaction.     

CeO2-TiO2复合氧化物的制备、表征及其对CO氧化的催化性能

采用溶胶-凝胶法制备了一系列不同n(Ce)/n(Ti)的CeO2-TiO2复合氧化物,对复合氧化物的物相结构、形貌特征、比表面积和氧化还原性质进行了表征,并考察了复合氧化物对CO氧化反应的催化性能.结果表明,n(Ce)/n(Ti)>0.10时,复合氧化物为无定形结构;n(Ce)/n(Ti)=0.10~0.30时,复合氧化物失去CeO2和TiO2各自的特征,形成CeO2-TiO2固溶体,具有较大的比表面积.CeO2-TiO2复合氧化物本身对CO氧化反应的催化活性不如TiO2或CeO2的高,但Pd/CeO2-TiO2比Pd/TiO2或Pd/CeO2具有更高的催化活性.     

Direct detection of a phase change in PdO/CeO2 supported on chi-Al2O3 by means of in situ high-temperature measurements of XRD and FTIR.

Phase changes between PdO and Pd metal can be directly detected in PdO/CeO2 catalysts supported on chi-Al2O3 by means of in situ high-temperature measurements of X-ray diffraction and FT-IR in relation to the catalytic activity for the methane oxidation of microcrystalline PdO. Reversible changes in the solid phases are observed from PdO to Pd and Pd to PdO under O2-deficient and O2-excess atmospheres, respectively. Nanosizes of PdO and Pd crystallites, the distorted PdO crystal structure along the (110) plane, and also a distorted Pd metal crystal structure along the (200) plane as well as the large surface area elucidate the high catalytic activity for the methane oxidation of PdO/CeO2 catalysts prepared with an atomic ratio of Pd:Ce = 1:1.     

石墨烯衍生物负载的纳米催化剂用于氧还原反应

综述了用于燃料电池中氧还原反应(ORR)的石墨烯衍生物负载的各种纳米催化剂的最新进展。介绍了用于表征石墨烯基电催化剂的常规电化学技术以及石墨烯基电催化剂最新的研究进展。负载于还原氧化石墨烯(RGO)上的Pt催化剂的电化学活性和稳定性均得到显著提高。其它贵金属催化剂,如Pd, Au和Ag也表现出较高的催化活性。当以RGO或少层石墨烯为载体时, Pd催化剂的稳定性提高。讨论了氧化石墨烯负载Au或Ag催化剂的合成方法。另外,以N4螯合络合物形式存在的非贵过渡金属可降低氧的电化学性能。 Fe和Co是可替代的廉价ORR催化剂。在大多数情况下,这些催化剂稳定性和耐受性的问题均可得到解决,但其整体性能还很难超越Pt/C催化剂。     

Highly Efficient AuPd/Carbon Nanotube Nanocatalysts for the Electro‐Fenton Process

Development of novel nanocatalysts for the highly efficient in situ synthesis of H₂O₂ from H₂ and O₂ in the electro‐Fenton (EF) process has potential for the remediation of water pollution. In this work, AuPd/carbon nanotube (CNT) nanocatalysts were successfully synthesized by the facile aggregation of AuPd bimetals on CNTs. Characterization by X‐ray diffraction, transmission electron microscopy, and X‐ray photoelectron spectroscopy indicated that pure AuPd bimetallic heterogeneous nanospheres (≈20 nm) were well dispersed outside the CNTs, which resulted in better catalytic performance than Pd/CNTs alone: 0.36 M H₂O₂ was synthesized; 0.05 M Fe²⁺ optimally initiated the EF process due to the superior in situ Fe²⁺ regeneration; and the organic pollutant removal reached 100 % at 37 min, with a pseudo‐first‐order kinetic constant k₁=0.051 min^?1. Moreover, structural insights before/after catalysis revealed that Au strengthened the construction of the nanocrystals, avoided negative deactivation caused by AuPd agglomeration, and immobilized the active Pd(111). The catalytic stability of AuPd/CNTs over ten cycles implied long durability and promising applications of this material.     

CeO2@Au核壳结构纳米粒子的合成与性质研究

采用沉淀法制备了球形CeO2纳米粒子,将其作为核粒子溶液,然后向其中滴加四氯合金酸溶液,在CeO2胶体表面利用柠檬酸钠还原[AuCl4]-离子,得到了CeO2@Au核壳结构纳米粒子。TEM分析表明,CeO2纳米粒子分散效果好,粒径为5 nm;CeO2@Au核壳粒子为球形,无团聚,平均粒径为15 nm。XRD分析表明,CeO2@Au核壳粒子为晶型结构,属于立方晶系,CeO2空间群为O5H-FM3M,Au的空间群为Fm-3m。UV-vis分析发现,CeO2@Au核壳粒子在300和520 nm处呈现出两个比较强的吸收峰,分别对应于CeO2胶体溶液的吸收峰和金粒子的表面等离子共振吸收峰。EDS分析了核壳结构CeO2@Au纳米粒子中存在Ce,O和Au 3种元素。XPS分析表明,Ce3d3/2和Au4f电子结合能与标准结合能相比发生了变化,说明CeO2与Au之间存在着相互作用。     

Nanostructured oxide-based powders: investigation of the growth mode of the CeO2 clusters on the YSZ surface

CeO(2)/YSZ nanocomposite powders, characterized by increasing Ce/Zr atomic ratio, were obtained by depositing, by wet impregnation, different amounts of CeO(2) on the yttria-stabilized zirconia (YSZ) surface. These powders were characterized by means of X-ray photoelectron spectroscopy, transmission electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Experimental results allow us to obtain interesting information concerning the growth mode, the morphology, and the dimensions of the CeO(2) clusters on the YSZ supporting surface. A 3-D growing mechanism was observed for the CeO(2) nanoparticles. With increasing Ce/Zr atomic ratio the CeO(2) clusters become more and more spherical. Moreover, XPS data also show the presence of Ce(III) and Ce(IV) ions at the interface supported/supporting oxides.     

Synthesis of N-Methyl-2-Thioimidazole Resin and Its Complex Behavior for Noble Metal Ions

The functional group capacity and the percentage of functional group conversion of crosslinked polystyrene resin bearing N-methyl-2-thioimidazole (MTIR) synthesized under optimum conditions are as high as 4.08 mmol/g resin and 96.0%, respectively. The apparent activation energies of sorption of MTIR for Au(III) and Pt(IV) are 13.1 and 13.4 kJ/mol, respectively. The sorption behavior of MTIR for Au(III), Pt(IV), and Pd(II) obeys the Freundlich and Langmuir isotherms. The sorption capacities of MTIR for Au(III), Pt(IV), and Pd(II) are as high as 4.33, 2.12, and 2.33 mmol/g resin, respectively. Au(III), Pt(IV), and Pd(II) adsorbed on MTIR can be eluted quantitatively by the eluant. The resin can be regenerated easily and reused without an obvious decrease in the sorption capacity for Au(III) and Pd(II). The resin has high sorption selectivity for noble metal ions. Au(III) can be separated quantitatively in the presence of high concentrations of Cu²⁺, Fe³⁺, Ni²⁺, and Mn²⁺. The recovery of platinum from the spent industrial catalysts is 98.6% by MTIR. The preconcentration and separation of palladium and platinum from the anode deposits of electrolysis of crude copper have been investigated. The resin may have potential industrial uses.     

水滑石层间阴离子为还原剂原位负载贵金属纳米颗粒

研究了以水滑石为载体原位负载贵金属纳米颗粒(Pd、Ag、Ru、Au)的方法,通过共沉淀合成甲酸根水滑石,以层间甲酸根为还原剂原位还原贵金属前驱体制得高分散水滑石(LDH)负载纳米颗粒。本方法无需载体预处理,操作方便、适用性强,阴离子前驱体(Au)和阳离子前驱体(Pd、Ag、Ru)均可顺利得到纳米颗粒。所得水滑石负载纳米颗粒系一种潜在的纳米催化剂,作为示例,Pd/LDH在Suzuki偶联反应中显示出较高催化活性。     

Interaction of Al2O3 and CeO2 surfaces with SO2 and SO2 + O2 studied by X-ray photoelectron spectroscopy

The interaction of Al2O3 and CeO2 thin films with sulfur dioxide (2.5 mbar) or with mixtures of SO2 with O2 (5 mbar) at various temperatures (30-400 degrees C) was studied by X-ray photoelectron spectroscopy (XPS). The analysis of temperature-induced transformations of S2p spectra allowed us to identify sulfite and sulfate species and determine the conditions of their formation on the oxide surfaces. Sulfite ions, SO3(2-), which are characterized by the S2p(3/2) binding energy (BE) of approximately 167.5 eV, were shown to be formed during the interaction of the oxide films with pure SO2 at temperatures < or =200 degrees C, whereas sulfate ions, SO4(2-), with BE (S2p(3/2)) approximately 169 eV were produced at temperatures > or =300 degrees C. The formation of both the sulfite and sulfate species proceeds more efficiently in the case of CeO2. The addition of oxygen to SO2 suppresses the formation of the sulfite species on both oxides and facilitates the formation of the sulfate species. Again, this enhancement is more significant for the CeO2 film than for the Al2O3 one. The sulfation of the CeO2 film is accompanied by a reduction of Ce(IV) ions to Ce(III) ones, both in the absence and in the presence of oxygen. It has been concluded that the amount of the sulfates on the CeO2 surface treated with the SO2 + O2 mixture at > or =300 degrees C corresponds to the formation of a 3D phase of the Ce(III) sulfate. The sulfation of Al2O3 is limited by the surface of the oxide film.     

Pd/Ce/Al/蜂窝陶瓷催化剂制备方法的研究

本文应用溶胶－凝胶技术对蜂窝陶瓷表面进行涂层,然后负载活性组分,以CO氧化作模型反应,考察了催化剂干燥方法,浸涂原液类型以及助剂CeO2对汽车尾气净化催化剂活性的影响,并应用TPR、XPS等手段对其进行表征,由催化剂活性测试结果表明,干燥方法对催化剂活性影响不大,加入分散剂的氧化铝溶胶作浸渍原液的催化活性最高,同时活性评价实验结果还表明,加入CeO2作助剂的催化剂的活性明显提高,这可能是由于PdO与CeO2之间发生的协同效应所致,XPS谱图结果显示,CeO2与PdO之间存在协同作用,且Pd处于较高的氧化状态,这可能起因于从Pd到Ce的电子转移作用,Ce处于较低的还原状态,导致Ce-O键结合强度的降低。H2－TPR表征结果同样证实了PdO与CeO2之间存在协同效应,CeO2的引入,促进了PdO的还原,而PdO的存在降低了CeO2表面氧的还原温度,同时此现象也支持了XPS结论。     

Sorption recovery of noble metal ions with a copolymer of 1-vinyl-1,2,4-triazole with acrylonitrile

Suspension copolymerization of 1-vinyl-1,2,4-triazole with acrylonitrile was used to synthesize an insoluble heat-resistant copolymer possessing sorption activity. An effect of the nature and concentration of acids on the recovery of noble metal ions Pt(IV), Pd(II), Au(III), and Ag(I) was observed. The kinetic and sorption characteristics of the copolymer were evaluated and the possibility of its application was assessed. IR and Raman spectroscopies were used to elucidate the mechanism of interaction of the copolymer with noble metal ions.     

Application of an imidazoline group-containing chelating fiber for the determination of trace noble metals in superhigh-temperature alloys

An imidazoline group-containing chelating fiber was prepared by means of the reaction of nitrile groups with ethylenediamine in an hydrazine-modified polyacrylonitrile fiber. The adsorption properties of the chelating fiber for Au(III), Pd(II), Pt(IV), Ir(IV), Os(IV), Rh(III) and Ru(IV) ions, such as binding capacity, distribution coefficient, sorptive rate and quantitative elution of Au(III), Pd(II) and Pt(IV) ions were investigated. The imidazoline group-containing chelating fiber possessed high binding capacities and good adsorption kinetic properties, exhibited high affinity for noble metals in 0.1–1.0 mol/L HCl and could be efficiently re-used. After the separation of trace Au(III), Pd(II) and Pt(IV) ions from a matrix using the chelating fiber, these ions could be determined by ICP-AES with satisfactory results, and the relative standard deviation for Au(III), Pd(II) and Pt(IV) ions was less than 6%. Received: 5 July 1999 / Revised: 4 October 1999 / Accepted: 4 October 1999     

Application of an imidazoline group-containing chelating fiber for the determination of trace noble metals in superhigh-temperature alloys

An imidazoline group-containing chelating fiber was prepared by means of the reaction of nitrile groups with ethylenediamine in an hydrazine-modified polyacrylonitrile fiber. The adsorption properties of the chelating fiber for Au(III), Pd(II), Pt(IV), Ir(IV), Os(IV), Rh(III) and Ru(IV) ions, such as binding capacity, distribution coefficient, sorptive rate and quantitative elution of Au(III), Pd(II) and Pt(IV) ions were investigated. The imidazoline group-containing chelating fiber possessed high binding capacities and good adsorption kinetic properties, exhibited high affinity for noble metals in 0.1-1.0 mol/L HCl and could be efficiently re-used. After the separation of trace Au(III), Pd(II) and Pt(IV) ions from a matrix using the chelating fiber, these ions could be determined by ICP-AES with satisfactory results, and the relative standard deviation for Au(III), Pd(II) and Pt(IV) ions was less than 6%.     

Liquid extraction of noble metal ions with bis(α-aminophosphonates)

Extraction of Au(III), Pt(IV), and Pd(II) ions from hydrochloric acid media with solutions of two bis(aminophosphonates), such as N,N-bis(dipentoxyphosphorylmethyl)octylamine and N,N′-bis[[(dioctyloxyphosphoryl)methyl]butylamine], in chloroform and xylene was investigated. Both these extractants proved to be highly effective for Au(III) ions in a wide acidity range, which allows these ions to be separated from other noble metal ions with a high degree of selectivity. At the same time, Pt(IV) and Pd(II) ions cannot be separated from one another with the extractants studied. The selectivity of their separation from Fe(III), Cu(II), Co(II), and Ni(II) metal ions is, too, not high. The reasons for these results lie in the specific structural features of the extractants, which predetermine the extraction mechanism.     

Liquid Extraction of Noble Metal Ions with an α-Amino Phosphonate

The extraction of Au(III), Pt(IV), and Pd(II) ions from aqueous hydrochloric acid solutions with solutions of bis(2-ethylhexyl) N-butyl-N-octylaminomethylphosphonate in chloroform and xylene was studied. The recovery of the noble metal ions is the most efficient at low acidities of the aqueous solution, with a high selectivity of separation from the concomitant Fe(III), Cu(II), Ni(II), and Co(II) ions.     

In situ facile loading of noble metal nanoparticles on polydopamine nanospheres via galvanic replacement reaction for multifunctional catalysis

Noble metal nanoparticles(Pd,Ag,Pt,Au) with small and relatively uniform sizes were loaded on polydopamine nanospheres through in situ galvanic replacement reaction in aqueous solution.No additional reductant,surfactant or organic solvent was needed.X-ray photoelectron spectroscopy results revealed that the amount of quinone increased,while the amount of phenolic hydroxyl decreased on PDA nanospheres,indicating that the galvanic displacement reaction occurred between catechol groups and noble metal ions.The as-prepared PDA/Pd exhibited high catalytic activity and excellent stability in styrene hydrogenation.Moreover,PDA spheres retains the photo-thermal effect to serve as a nano-sized heater to accelerate the catalytic reactions under near-infrared illumination.