Tripodal amido boron and aluminum complexes

The synthesis and structural elucidations of novel boron and aluminum complexes incorporating the tripodal triamido [N3]3- ligand framework that is hypothesized to promote the preorganized pyramidal geometry for high Lewis acidity are reported. Salt metathesis between the in situ-generated trianionic lithium complexes of the tripodal amido ligands with BCl3 leads to boranes HC[SiMe2N(4-MeC6H4)]3B (1) and MeSi[SiMe2N(4-MeC6H4)]3B (2); however, substitution of the N-Ar group with the bulky tBu affords the unexpected non-boron-containing LiCl adduct {[HC(SiMe2NtBu)2(SiMeNtBu)]Li3(Et2O)Cl}2 (3) via apparent elimination of MeBCl2. The products derived from the salt metathesis reaction with AlCl3 are determined by the reaction medium: while the reaction in a hexanes-ether mixture or toluene affords solvated salt adduct HC[SiMe2N(4-MeC6H4)]3Al.ClLi(Et2O)2 (4) or salt adduct HC[SiMe2N(4-MeC6H4)]3Al.ClLi (5), respectively; the addition of a small amount of THF produces a mixture of complexes HC[SiMe2N(4-MeC6H4)]3Al.(THF) (6, major) and HC[SiMe2N(4-MeC6H4)]3Al(OCH=CH2).Li(THF)2 (7, minor). The desired complex 6 can be exclusively formed using HC[SiMe2N(4-MeC6H4)]3Li3.(THF)3 and the hexanes-ether mixture solvent. The molecular structures of complexes 1, 3, 5, 6, and 7 have been elucidated by X-ray diffraction studies. The structure of 1 shows an approximately trigonal pyramidal geometry at B with no significant N-B p-p pi-interactions. The strong salt adduct and solvate formation of the tripodal amido Al complex, as well as its similarity to the strong Lewis acid Al(C6F5)3 in the THF adduct and enolaluminate formation and structure, indicate the desired core structure [N3]Al is indeed highly Lewis acidic.     

Reaction of [60]fullerene with free radicals generated from active methylene compounds by manganese(III) acetate dihydrate

The reaction of [60]fullerene with dimethyl malonate and diethyl malonate in the presence of manganese(III) acetate dihydrate (Mn(OAc)3.2H2O) for 20 min afforded singly bonded [60]fullerene dimers 1a and 1b in a 1,4-addition pattern. When the reaction time was extended to 1 h, 1,4-bisadducts 2a and 2b were obtained. Unsymmetrical 1,4-adduct 5 and C2 symmetrical 1,16-bisadduct 6 were obtained when diethyl bromomalonate was used as the active methylene compound. Reaction of [60]fullerene with malononitrile and ethyl cyanoacetate with the aid of Mn(OAc)3.2H2O produced methanofullerenes 7 and 8. It is proposed that all these products were formed the addition of free radicals from the active methylene compounds generated by Mn(OAc)3.2H2O.     

Syntheses, structure, and derivatization of potassium complexes of penta(organo)[60]fullerene-monoanion, -dianion, and -trianion into hepta- and octa(organo)fullerenes

Two-electron reduction of penta(organo)[60]fullerenes C(60)Ar(5)H (Ar = Ph and biphenyl) by potassium/mercury amalgam afforded potassium complexes of the corresponding open-shell radical dianions [K+(thf)n]2[C60Ar5(2-.)]. These compounds were characterized by UV-visible-near-IR and electron spin resonance spectroscopy in solution. Anaerobic crystallization of [K+(thf)n]2[C60(biphenyl)(5)(2-.)] that exists largely as a monomer in solution gave black crystals of its dimer [K+(thf)3]4[(biphenyl)5C60-C60(biphenyl)5(4-)], in which the two fullerene units are connected by a C-C single bond [1.577(11) A] as determined by X-ray diffraction. Three-electron reduction of C60Ar5H with metallic potassium gave a black-green trianion [K+(thf)n]3[C60Ar5(3-)]. The reaction of the trianion with an alkyl halide RBr (R = PhCH(2) and Ph(2)CH) regioselectively afforded a hepta-organofullerene C60Ar5R2H, from which a potassium complex [K+(thf)n][C60(biphenyl)5(CH2Ph)(2)(-)] and a palladium complex Pd[C60(biphenyl)5(CH2Ph)2](pi-methallyl) as well as octa-organofullerene compounds C60(biphenyl)5(CH2Ph)3H2 and Ru[C60(biphenyl)5(C2Ph)3H]Cp were synthesized. These compounds possess a dibenzo-fused corannulene pi-electron conjugated system and are luminescent.     

Cationic Rh complexes with novel spiro tetraarylpentaborate anions prepared from arylboronic acids and aryloxorhodium complexes

Ar-B(OH)2 (1a: Ar = C6H4OMe-4, 1b: Ar = C6H3Me2-2,6) react immediately with Rh(OC6H4Me-4)(PMe3)3 (2) in 5 : 1 molar ratio at room temperature to generate [Rh(PMe3)4]+[B5O6Ar4]- (3a: Ar = C6H4OMe-4, 3b: Ar = C6H3Me2-2,6). p-Cresol (92%/Rh), anisole (80%/Rh) and H2O (364%/Rh) are formed from 1a and 2. The reaction of 1a with 2 for 24 h produces [Rh(PMe3)4]+[B5O6(OH)4]- (4) as a yellow solid. This is attributed to hydrolytic dearylation of once formed 3a because the direct reaction of 3a with excess H2O forms 4. An equimolar reaction of 2 with phenylboroxine (PhBO)3 causes transfer of the 4-methylphenoxo ligand from rhodium to boron to produce [Rh(PMe3)4]+[B3O3Ph3(OC6H4Me-4)]- (5). Arylboronic acids 1a and 1b react with Rh(OC6H4Me-4)(PR3)3 (6: R = Et, 8: R = Ph) and with Rh(OC6H4Me-4)(cod)(PR3) (11: R = iPr, 12: R = Ph) to form [Rh(PR3)4]+[B5O6Ar4]- (7a: R = Et, Ar = C6H4OMe-4, 7b: R = Et, Ar = C6H3Me2-2,6, 9a: R = Ph, Ar = C6H3Me2-2,6) and [Rh(cod)(PR3)(L)]+[B5O6Ar4]- (13b: R = iPr, L = acetone, Ar = C6H3Me2-2,6, 14a: R = Ph, L = PPh3, Ar = C6H4OMe-4, 14b: R = Ph, L = PPh3, Ar = C6H3Me2-2,6), respectively. Hydrolysis of 14a yields [Rh(cod)(PPh3)2]+[B5O6(OH)4]- (15) quantitatively.     

Unsymmetrically substituted 9,10-dihydro-9,10-diboraanthracenes as versatile building blocks for boron-doped π-conjugated systems

The targeted hydrolysis of the 9,10-dihydro-9,10-diboraanthracene adduct (Me(2)S)HB(C(6)H(4))(2)BH(SMe(2)) (1) with 0.5 equiv of H(2)O leads to formation of the borinic acid anhydride [(Me(2)S)HB(C(6)H(4))(2)B](2)O (2) and thereby provides access to the field of unsymmetrically substituted 9,10-dihydro-9,10-diboraanthracenes. Compound 2 reacts with tBuC≡CH to give the corresponding vinyl derivative in an essentially quantitative conversion. Subsequent cleavage of the B-O-B bridge by LiAlH(4) with formation of hydridoborate functionalities is possible but is accompanied by partial B-C(vinyl) bond degradation. This situation changes when the related mesityl derivative [MesB(C(6)H(4))(2)B](2)O (7) is employed, which can be synthesized from BrB(C(6)H(4))(2)BBr (6) by treatment with 1 equiv of MesMgBr and subsequent hydrolysis. The reaction of 7 with LiAlH(4) in tetrahydrofuran (THF) furnishes Li[MesB(C(6)H(4))(2)BH(2)] (8); hydride elimination with Me(3)SiCl leads to formation of the THF adduct MesB(C(6)H(4))(2)BH(THF) (9·THF). Alternatively, 7 can be transformed into the bromoborane MesB(C(6)H(4))(2)BBr (10) by treatment with BBr(3). A Br/H-exchange reaction between 10 and Et(3)SiH yields the donor-free borane MesB(C(6)H(4))(2)BH (9), which forms B-H-B bridged dimers (9)(2) in the solid state. The vinyl borane MesB(C(6)H(4))(2)BC(H)=C(H)Mes (14) is accessible from MesC≡CH and either 9·THF or 9. Compared with the related compound Mes(2)BC(H)=C(H)Mes, the electronic absorption and emission spectra of 14 reveal bathochromic shifts of Δλ(abs)=17 nm and Δλ(em)=74 nm, which can be attributed to the rigid, fully delocalized π framework of the [MesB(C(6)H(4))(2)B] chromophore.     

Ring-opening protonolysis of sila[1]ferrocenophanes as a route to stabilized silylium ions

The ring-opening reactions of a series of sila[1]ferrocenophanes with protic acids of anions with various degrees of noncoordinating character have been explored. Ferrocenyl-substituted silyl triflates FcSiMe2OTf (5 a) and Fc(3)SiOTf (5 b) (Fc=(eta5-C5H4)Fe(eta5-C5H5)) were synthesized by means of HOTf-induced ring-opening protonolysis of strained sila[1]ferrocenophanes fcSiMe2 (3 a) and fcSiFc2 (3 b) (fc=(eta5-C5H4)2Fe). Reaction of 3 a and 3 b with HBF4 yielded fluorosubstituted ferrocenylsilanes FcSiMe2F (6 a) and Fc3SiF (6 b) and suggested the intermediacy of a highly reactive silylium ion capable of abstracting F- from the [BF4]- ion. Generation of the solvated silylium ions [FcSiMe2THF]+ (7a+), [Fc3SiTHF]+ (7b+) and [FcSiiPr2OEt2]+ (7c+) at low temperatures, by reaction of the corresponding sila[1]ferrocenophanes (3 a, 3 b, and fcSiiPr2 (3 c), respectively) with H(OEt2)(S)TFPB (S=Et2O or THF; TFPB=tetrakis[3,5-bis(trifluoromethyl)phenyl]borate) was monitored by using low-temperature 1H, 13C, and 29Si NMR spectroscopy. In situ reaction of 7a+, 7b+, and 7c+ with excess pyridine generated [FcSiMe2py]+ (8a+), [Fc3Sipy]+ (8b+), and [FcSiiPr2py]+ (8c+), respectively, as observed by 1H, 13C, and 29Si NMR spectroscopy. A preparative-scale reaction of 3 b with H(OEt2)(THF)TFPB at -60 degrees C and subsequent addition of excess pyridine gave isolable red crystals of 8b-[TFPB]CHCl3, which were characterized by 1H and 29Si NMR spectroscopy as well as by single-crystal X-ray diffraction.     

White phosphorus activation at a metal-phosphorus triple bond: a new route to cyclo-triphosphorus or cyclo-pentaphosphorus complexes of niobium

The Nb-P triple bond in [P≡Nb(N[Np]Ar)(3)](-) (Np = CH(2)(t)Bu; Ar = 3,5-Me(2)C(6)H(3)) has produced the first case of P(4) activation by a metal-ligand multiple bond. Treatment of P(4) with the sodium salt of the niobium phosphide complex in weakly coordinating solvents led to formation of the cyclo-P(3) anion [(P(3))Nb(N[Np]Ar)(3)](-). Treatment in tetrahydrofuran (THF) led to the formation of a cyclo-P(5) anion [(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)](-), which represents a rare example of a substituted pentaphosphacyclopentadienyl ligand. The P(4) activation pathway was shown to depend on the dimer-monomer equilibrium of the niobium phosphide reagent, which, in turn, depends on the solvent used for the reaction. The pathway leading to the cyclo-P(3) product was shown to require a 2:1 ratio of the phosphide anion to P(4), while the cyclo-P(5) formation requires a 1:1 ratio. The cyclo-P(3) salt has been isolated in 56% yield as orange crystals of the [Na(THF)](2)[(P(3))Nb(N[Np]Ar)(3)](2) dimer or in 83% yield as an orange powder of [Na(12-crown-4)(2)][(P(3))Nb(N[Np]Ar)(3)]. A solid-state X-ray diffraction experiment on the former salt revealed that each Nb-P(3) unit exhibits pseudo-C(3) symmetry, while (31)P NMR spectroscopy showed a sharp signal at -223 ppm that splits into a doublet-triplet pair below -50 °C. It was demonstrated that this salt can serve as a P(3)(3-) source upon treatment with AsCl(3), albeit with modest yield of AsP(3). The cyclo-P(5) salt was isolated in 71% yield and structurally characterized from red crystals of [Na(THF)(6)][(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)]. The anion in this salt can be interpreted as the product of trapping of an intermediate pentaphosphacycplopentadienyl structure through migration of one anilide ligand onto the P(5) ring. The W(CO)(5)-capped cyclo-P(3) salt was also isolated in 60% yield as [Na(THF)][(OC)(5)W(P(3))Nb(N[Np]Ar)(3)] from the activation of 0.5 equiv of P(4) with the sodium salt of the tungsten pentacarbonyl adduct of the niobium phosphide anion.     

Biphenolate phosphine complexes of tin(IV)

The preparation and structural characterization of tin(IV) complexes supported by (2,2'-phenylphosphino)bis(4,6-di-tert-butylphenolate) ([OPO]2-) are described. The reaction of in-situ prepared Li2[OPO] with SnCl4 in THF at -35 degrees C produced [OPO]SnCl2(THF) as a THF adduct. Addition of SnCl4 to a THF solution of H2[OPO] in the presence of 2 equiv of NEt3 at room temperature led to the formation of the "ate" complex {[OPO]SnCl3}(HNEt3). The metathetical reactions of Li2[OPO] with R2SnCl2 (R=Me, n-Bu) in THF at -35 degrees C generated the corresponding five-coordinate dialkyl complexes [OPO]SnR2. In addition to the multinuclear NMR spectroscopic data for all new compounds, X-ray structures of [OPO]SnCl2(THF), [OPO]SnMe2, and [OPO]Sn(n-Bu)2 are presented.     

Introduction of Constrained Cyclic Skeleton into β-Enaminoketonato Vanadium Complexes: A Strategy for Stabilization of Active Centre of Vanadium Catalyst for Ethylene Polymerization

Several novel mono( ?-enaminoketonato) vanadium complexes bearing constrained cyclic skeleton, including[(C6H5)C6H3C(O) = C(CH2)nCH = N ― Ar]VCl2(THF)2(V3a: n = 1, Ar = C6H5; V4a: n = 2, Ar = C6H5; V4b: n = 2, Ar =C6F5; V4c: n = 2, Ar =(C3H7)2C6H3; V5a: n = 3, Ar = C6H5), were synthesized and their structure and properties were characterized. The structures of V4 c and V5 a in solid-state were further confirmed by X-ray crystallographic analysis.Density functional theory(DFT) results indicated that these complexes showed enhanced steric hindrance around the metal center as compared with the acyclic analogues. Upon activation with Et2 Al Cl and in the presence of ethyl trichloroacetate as a reactivator, all of the complexes exhibited high catalytic activities(107 g PE/(mol V·h)) toward ethylene polymerization, and the obtained polymers exhibited unimodal distributions(Mw/Mn = 2.0-2.3) even produced at elevated temperatures(70-100 °C) and prolonged reaction time. When MAO was employed as a cocatalyst, they only showed moderate catalytic activities(105 g PE/(mol V·h)), but the resulting polymers had higher molecular weights(168-241 kg/mol). These vanadium complexes with cyclic skeleton also showed high catalytic activities toward ethylene/norbornene copolymerization. The produced copolymers displayed approximate alternating structure at high in-feed concentration of norbornene. The catalytic capabilities of these complexes could be tuned conveniently by varying ligand structure. Furthermore, the cyclic voltammetry results also proved that these complexes exhibited better redox stabilities than the complexes bearing linear skeleton.     

Activation of carbodiimide and transformation with amine to guanidinate group by Ln(OAr)3(THF)2 (Ln: lanthanide and yttrium) and Ln(OAr)3(THF)2 as a novel precatalyst for addition of amines to carbodiimides: influence of aryloxide group

Reaction of Ln(OAr(1))(3)(THF)(2) (Ar(1)= [2,6-((t)Bu)(2)-4-MeC(6)H(2)] with carbodiimides (RNCNR) in toluene afforded the RNCNR coordinated complexes (Ar(1)O)(3)Ln(NCNR) (R = (i)Pr (isopropyl), Ln = Y (1) and Yb (2); R = Cy (cyclohexyl), Ln = Y (3)) in high yields. Treatment of 1 and 2 with 4-chloroaniline, respectively, at a molar ratio of 1:1 yielded the corresponding monoguanidinate complex (Ar(1)O)(2)Y[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (4) and (Ar(1)O)(2)Yb[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (5). Complexes 4 and 5 can be prepared by the reaction of Ln(OAr(1))(3)(THF)(2) with RNCNR and amine in toluene at a 1:1:1 molar ratio in high yield directly. A remarkable influence of the aryloxide ligand on this transformation was observed. The similar transformation using the less bulky yttrium complexes Y(OAr(2))(3)(THF)(2) (Ar(2) = [2,6-((i)Pr)(2)C(6)H(3)]) or Y(OAr(3))(3)(THF)(2) (Ar(3) = [2,6-Me(2)C(6)H(3)]) did not occur. Complexes Ln(OAr(1))(3)(THF)(2) were found to be the novel precatalysts for addition of RNCNR with amines, which represents the first example of catalytic guanylation by the lanthanide complexes with the Ln-O active group. The catalytic activity of Y(OAr(1))(3)(THF)(2) was found to be the same as that of monoguanidinate complex 4, indicating 4 is one of the active intermediates in the present process. The other intermediate, amide complex (Ar(1)O)(2)Ln[(2-OCH(3)-C(6)H(4)NH)(2-OCH(3)-C(6)H(4)NH(2))] (6), was isolated by protonolysis of 4 with 2-OCH(3)-C(6)H(4)NH(2). All the complexes were structurally characterized by X-ray single crystal determination.     

Synthesis, crystal structure and reactivity of uranium(IV) complexes with p-tert-butylcalix[4]arene ligands

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.     

Liquid‐Crystalline Mixed [5 : 1]Hexa‐adducts of [60]Fullerene. Preliminary Communication

A liquid‐crystalline mixed [5 : 1]hexa‐adduct of [60]fullerene was synthesized by addition of two different malonate derivatives onto C₆₀. The hexa‐adduct derivative 2 was prepared by a stepwise synthetic procedure (fullerene→mono‐adduct of C₆₀→hexa‐adduct of C₆₀). Cyanobiphenyl and octyloxybiphenyl derivatives were selected as mesogens. The malonate derivatives showed either a monotropic nematic phase or a monotropic smectic A phase, and the hexa‐adduct derivative gave rise to an enantiotropic smectic A phase.     

Synthesis,characterization, and laser flash photolysis reactivity of a carbonmonoxy heme complex

We present here the synthesis, characterization, and flash photolysis study of [(F(8)TPP)Fe(II)(CO)(THF)] (1) [F(8)TPP = tetrakis(2,6-difluorophenyl)porphyrinate(2-)]. Complex 1 crystallizes from THF/heptane solvent system as a tris-THF solvate, [(F(8)TPP)Fe(II)(CO)(THF)].3THF (1.3THF), with ferrous ion in the porphyrin plane (C(61)H(52)F(8)FeN(4)O(5); a = 11.7908(2) A, b = 20.4453(2) A, c = 39.9423(3), alpha = 90 degrees, beta = 90 degrees, gamma = 90 degrees; orthorhombic, P2(1)2(1)2(1), Z = 8; Fe-N(4)(av) = 2.00 A; N-Fe-N (all) = 90.0 degrees ). This complex (as 1.THF) has also been characterized by (1)H NMR [six-coordinate, low-spin heme; CD(3)CN, RT, delta 8.82 (s, pyrrole-H, 8H), 7.89 (s, para-phenyl-H, 8H), 7.46 (s, meta-phenyl-H, 4H), 3.58 (s, THF, 8H), 1.73 (s, THF, 8H)], (2)H NMR (pyrrole-deuterated analogue) [(F(8)TPP-d(8))Fe(II)(CO)(THF)] [THF, RT, delta 8.78 ppm (s, pyrrole-D)], (13)C NMR (on (13)CO-enriched adduct) [THF-d(8), RT, delta 206.5 ppm; CD(2)Cl(2), RT, delta 206.1 ppm], UV-vis [THF, RT, lambda(max), 411 (Soret), 525 nm], and IR [293 K, solution, nu(CO) 1979 cm(-)(1) (THF), 1976 cm(-)(1) (acetone), 1982 cm(-)(1) (CH(3)CN)] spectroscopies. In order to more fully understand the intricacies of solvent-ligand binding (as compared to CO rebinding to the photolyzed heme), we have also synthesized the bis-THF adduct [(F(8)TPP)Fe(II)(THF)(2)]. Complex 2 also crystallizes from THF/heptane solvent system as a bis-THF solvate, [(F(8)TPP)Fe(II)(THF)(2)].2THF (2.2THF), with ferrous iron in the porphyrin plane (C(60)H(52)F(8)FeN(4)O(4); a = 21.3216(3) A, b = 12.1191(2) A, c = 21.0125(2) A, alpha = 90 degrees, beta = 105.3658(5) degrees, gamma = 90 degrees; monoclinic, C2/c, Z = 4; Fe-N(4)(av) = 2.07 A; N-Fe-N (all) = 90.0 degrees ). Further characterization of 2 includes UV-vis [THF, lambda(max), 421 (Soret), 542 nm] and (1)H NMR [six-coordinate, high spin heme; THF-d(8), RT, delta 56.7 (s, pyrrole-H, 8H), 8.38 (s, para-phenyl-H, 8H), 7.15 (s, meta-phenyl-H, 4H)] spectroscopies. Flash photolysis studies employing 1 were able to resolve the CO rebinding kinetics in both THF and cyclohexane solvents. In CO saturated THF [[CO] approximately 5 mM] and at [1] congruent with 5 microM, the conversion of [(F(8)TPP)Fe(II)(THF)(2)] (produced after photolytic displacement of CO) to [(F(8)TPP)Fe(II)(CO)(THF)] was monoexponential, with k(obs) = 1.6 (+/-0.2) x 10(4) s(-)(1). Reduction in [CO] by vigorous Ar purging gave k(obs) congruent with 10(3) s(-)(1) in cyclohexane. The study presented in this report lays the foundation for applying fast-time scale studies based on CO flash photolysis to the more complicated heterobimetallic heme/Cu systems.     

Arylphosphanide complexes of the alkaline-earth metals magnesium, calcium, strontium, and barium of the formula (THF)nM[P(H)Ph]2 and formation of potassium diphenylphosphinomagnesiates

The reaction of diethylmagnesium with diphenylphosphane yields [(THF)Mg(Et)PPh 2] infinity ( 1; THF = tetrahydrofuran) with bridging PPh 2 ligands and average Mg-P bond lengths of 262.2 pm. The metalation reaction of MgEt 2 with HPPh 2 and H 2PPh with a 1:2 stoichiometry gives [(THF) 4Mg(PPh 2) 2] ( 2) and [(THF) 6Mg 4{P(H)Ph} 8] ( 3), respectively. Tetranuclear 3 contains three chemically different phenylphosphanide groups with characteristic P-H stretching frequencies at 2261, 2286, and 2310 cm (-1). The metathesis reaction of potassium phenylphosphanide with CaI 2 yields oligomeric (THF) 3Ca[P(H)Ph] 2 ( 4). A similar reaction with SrI 2 and BaI 2 gives polymeric [(THF) 2Sr{P(H)Ph} 2] infinity ( 5) and [(THF)Ba{P(H)Ph} 2] infinity ( 6), respectively, showing one stretching frequency at 2285 cm (-1). These compounds crystallize polymeric with bridging phenylphosphanide substituents. The addition of Et 2O to a mixture of KPPh 2 and Mg(PPh 2) 2 in THF initiates the crystallization of (Et 2O)K[(THF)Mg(PPh 2) 3] ( 7) with a strand structure and (Et 2O) x(THF) yK 2[Mg(PPh 2) 4] ( 8) with a layer structure depending on the stoichiometry. The crystals of 8 easily lose THF and Et 2O and, therefore, the content of these ethers varies. Recrystallization of 8 from hot 1,4-dioxane (diox) yields (diox) 2K 2[Mg(PPh 2) 4] ( 9) with a layer structure comparable to that of 8. The central structural units are eight-membered K 2Mg 2P 4 rings that are interconnected by P-K-P bridges. In a THF solution, the magnesiates 7- 9 dissociate into the homometallic derivatives KPPh 2 and Mg(PPh 2) 2, as can be seen from NMR experiments.     

环戊二烯基(或茚基)二氯化钕体系催化丁二烯聚合反应动力学

<正> 环戊二烯基(或茚基)轻烯土二氯化物C_5H_5NdCl_2·nC_4H_8O(C_5H_5为环戊二烯基、C_4H_8O为四氢呋喃、Ln代表Pr或Nd、n=0,1,2,3)、C_5H_5LnCl_2·HCl·nC_4H_8O、C_9H_7LnCl_2·nC_4H_8O和C_9H_7LnCl_2·HCl·nC_4H_8O(C_9H_7为茚基)能与烷基铝组合形成一类新型丁二烯聚合催化剂,虽然稀土催化丁二烯聚合反应动力学已有报道,但是其催化体系、聚合条件和研究方法各不相同。过去的研究多应用稳态动力学处理方法侧重于聚合速度的研究。本文的目的在于通过聚合物活性链的变化,考察C_5H_5NdCl_2·nC_4H_8O     

Novel dimetal bridging carbene complexes derived from a terminal carbonyl dimetal compound. Syntheses, structures and reactivities of 7H-indene-coordinated diiron bridging carbene complexes

Pentacarbonyl-7H-indenediiron, [Fe2(CO)5(eta3,eta5-C9H8)] (1), reacts with aryllithium, ArLi (Ar = C6H5, p-C6H5C6H4), followed by alkylation with Et3OBF4 to give novel 7H-indene-coordinated diiron bridging alkoxycarbene complexes [Fe2{mu-C(OC2H5)Ar}(CO)4(eta4,eta4-C9H8)] (2, Ar = C6H5; 3, Ar = p-C6H5C6H4). Complexes 2 and 3 react with HBF4.Et2O at low temperature to yield cationic bridging carbyne complexes [Fe2(mu-CAr)(CO)4(eta4,eta4-C9H8)]BF4 (4, Ar = C6H5; 5, Ar = p-C6H5C6H4). Cationic 4 and 5 react with NaBH4 in THF at low temperature to afford diiron bridging arylcarbene complexes [Fe2{mu-C(H)Ar}(CO)4(eta4,eta4-C9H8)] (6, Ar = C6H5; 7, Ar = p-C6H5C6H4). The similar reactions of 4 and 5 with NaSC6H4CH3-p produce the bridging arylthiocarbene complexes [Fe2{mu-C(Ar)SC6H4CH3-p}(CO)4(eta4,eta4-C9H8)] (8, Ar = C6H5; 9, Ar = p-C6H5C6H4). Cationic 4 and 5 can also react with anionic carbonylmetal compounds Na[M(CO)5(CN)] (M = Cr, Mo, W) to give the diiron bridging aryl(pentacarbonylcyanometal)carbene complexes [Fe2{mu-C(Ar)NCM(CO)5}(CO)4(eta4,eta4-C9H8)] (10, Ar = C6H5, M = Cr; 11, Ar = p-C6H5C6H4, M = Cr; 12, Ar = C6H5, M = Mo; 13, Ar = p-C6H5C6H4, M = Mo; 14, Ar = C6H5, M = W; 15, Ar = p-C6H5C6H4, M = W). Interestingly, in CH2Cl2 solution at room temperature complexes 10-15 were transformed into the isomerized 7H-indene-coordinated monoiron complexes [Fe(CO)2(eta5-C9H8)C(Ar)NCM(CO)5] (16, Ar = C6H5, M = Cr; 17, Ar = p-C6H5C6H4, M = Cr; 18, Ar = C6H5, M = Mo; 19, Ar = p-C6H5C6H4, M = Mo; 20, Ar = C6H5, M = W; 21, Ar = p-C6H5C6H4, M = W), while complex 3 was converted into a novel ring addition product [Fe2{C(OC2H5)C6H4C6H5-p-(eta2,eta5-C9H8)}(CO)5] (22) under the same conditions. The structures of complexes 2, 6, 8, 14, 18 and 22 have been established by X-ray diffraction studies.     

Reactions of tris(amino)phosphines with arylsulfonyl azides: product dependency on tris(amino)phosphine structure

The Staudinger reaction of N(CH2CH2NR)3P [R = Me (1), Pr (2)] with 1 equiv of N3SO2C6H4Me-4 gave the ionic phosphazides [N(CH2CH2NR)3PN][SO2C6H4Me-4] [R = Me (3), R = Pr (5a)], and the same reaction of 2 with N3SO2C6H2Me3-2,4,6 gave the corresponding aryl sulfinite 5b. On the other hand, the reaction of 1 with 0.5 equiv of N3SO2Ar (Ar = C6H4Me-4) furnished the novel ionic phosphazide [[N(CH2CH2NMe)3P]2(mu-N3)][SO2Ar] (6). Data that shed light on the mechanistic pathway leading to 3 were obtained by low temperature 31P NMR spectroscopy. A crystal and molecular structure analysis of the phosphazide sulfonate [N(CH2CH2NMe)3PN3][SO3C6H4Me-4] (4), obtained by atmospheric oxidation of 3, indicated an ionic structure, the cationic part of which is stabilized by a transannular P-N bond. A crystal and molecular structure analysis of 6 also indicated an ionic structure in which the cation features two untransannulated N(CH2CH2NMe)3P cages bridged by an azido group in an eta 1: mu: eta 1 fashion. The reaction of P(NMe2)3 with N3SO2Ar (Ar = C6H4Me-4) in a 1:0.5 molar ratio furnished [[(Me2N)3P]2(mu-N3)][SO2-Ar] (11) in quantitative yield. On the other hand, the same reaction involving a 1:1 molar ratio of P(NMe2)3 and N3SO2Ar produced a mixture of 11, [(Me2N)3PN3][SO2Ar] (12), and the iminophosphorane (Me2N)3P=NSO2Ar (10). In contrast, the bicyclic tris(amino)phosphines MeC(CH2NMe)3P (7) and O=P(CH2NMe)3P (8) reacted with N3SO2-Ar (Ar = C6H4Me-4) to give the iminophosphorane MeC(CH2NMe)3P=NSO2Ar (14) (structured by X-ray means) and O=P(CH2NMe)3P=NSO2Ar (16) via the intermediate phosphazides MeC(CH2NMe)3PN3SO2Ar (13) and O=P(CH2NMe)3PN3SO2Ar (15), respectively. The variety of products obtained from the reactions of arylsulfonyl azides with proazaphosphatranes (1 and 2), acyclic P(NMe2)3, bicyclic tris(amino)phosphines 7 and 8 are rationalized in terms of steric and basicity variations among the phosphorus reagents.     

Synthesis and characterisation of yttrium complexes supported by the beta-diketiminate ligand {ArNC(CH3)CHC(CH3)NAr}- (Ar = 2,6-Pr(i)2C6H3)

Reaction of YI(3)(THF)(3.5) with one equivalent of the potassium beta-diketiminate (BDI) complex [HC{C(CH(3))NAr}(2)K] (Ar = 2,6-Pr(i)(2)C(6)H(3)) affords the monomeric, mono-substituted yttrium BDI complex [HC{C(CH(3))NAr}(2)YI(2)(THF)] in good yield. Reaction of with DME affords [HC{C(CH(3))NAr}(2)YI(2)(DME)] in quantitative yield, which is monomeric also. Reaction of the primary terphenyl phosphane Ar*PH(2) (Ar* = 2,6-(2,4,6-Pr(i)(3)C(6)H(2))(2)C(6)H(3)) with potassium hydride, and recrystallisation from hexane, affords the potassium primary terphenyl phosphanide complex [{Ar*P(H)K(THF)}(2)] in high yield. Compound is dimeric in the solid state, constructed around a centrosymmetric K(2)P(2) four-membered ring, the coordination sphere of potassium is supplemented with an eta(6) K[dot dot dot]C(aryl) interaction. The reaction of with one molar equivalent of in THF affords the THF ring-opened compound [HC{C(CH(3))NAr}(2)Y{O(CH(2))(4)P(H)Ar*}(I)(THF)]. Compound is formed as a mixture of endo(OR) and exo(OR) isomers (: = approximately 2 : 1) which may be separated by fractional crystallisation from hexane-toluene to give pure . Attempted alkylation of with two equivalents of KCH(2)Si(CH(3))(3) affords the potassium yttriate complex [Y{micro-eta(5):eta(1)-ArNC(CH(3))[double bond, length as m-dash]CHC([double bond, length as m-dash]CH(2))NAr}(2)K(DME)(2)] in moderate yield; contains two dianionic dianilide ligands, which are derived from C-H activation of a backbone methyl group, each bonded eta(5) to yttrium in the solid state. The reaction of with one equivalent of KC(8) affords [{HC(C[CH(3)]NAr)(2)YI(micro-OCH(3))}(2)], derived from C-O bond activation of DME, as the only isolable product in very low yield. Compounds , , , , , and have been characterised by single crystal X-ray diffraction, NMR spectroscopy and CHN microanalyses.     

Iodo-controlled selective formation of pyrrolidino[60]fullerene and aziridino[60]fullerene from the reaction between C6) and amino acid esters

The reaction between glycine methyl ester and C60 can be effectively controlled by different iodo-reagents. Addition of DIB ((diacetoxyiodo)benzene) yields the 2,5-bismethoxycarbonyl pyrrolidino[60]fullerene under ultrasonic irradiation; whereas addition of DIB-iodine results in the N-methoxycarbonylmethyl aziridino[60]fullerene under ultrasonic irradiation. The reaction of sarcosine methyl ester with C60 is similar to that of glycine methyl ester under these two conditions. Addition of just iodine to a mixture of sarcosine methyl ester and C60 affords the tetra(amino)[60]fullerene epoxide C60(O)((Me)NCH2COOMe)4. Possible mechanisms are discussed.     

Photoaddition of N-substituted piperazines to C60: an efficient approach to the synthesis of water-soluble fullerene derivatives

An oxidative radical photoaddition of mono N-substituted piperazines to [60]fullerene was systematically investigated. Reactions of C60 with piperazines bearing bulky electron-withdrawing groups (2-pyridyl, 2-pyrimidinyl) were found to be the most selective and yielded C60(amine)4O as major products along with small amounts of C60(amine)2. In contrast, interactions of fullerene with N-methylpiperazine and N-(tert-butoxycarbonyl)piperazine were found to have low selectivity due to different side reactions. Tetraaminofullerene derivative C60(N-(2-pyridyl)piperazine)4O was found to react readily with organic and inorganic acids to yield highly water-soluble salts (solubility approximately 150 mg mL(-1)). In contrast, C60(N-(2-pyrimidinyl)piperazine)4O undergoes hydrolysis under the same conditions and results in a complex mixture of compounds with an average composition of C60(N-(2-pyrimidinyl)piperazine)2(OH)2O. Radical photoaddition of N-(2-pyridyl)piperazine to fullerene derivatives can be used as a facile route for their transformation into water-soluble compounds. Two model fullerene cycloadducts (a methanofullerene and a pyrrolidinofullerene) were easily converted into mixtures of regioisomers of A=C60(N-(2-pyridyl)piperazine)4O (A=cyclic addend) that give highly water-soluble salts under acid treatment.